Posted by rodeo123456 on March 13, 2014 at 07:35:38 from (184.151.114.194):
Hi
I was posted in another forum but may have been the wrong one
Anyways
I wonder if someone could help me ,The 3 point hitch was not working and I got it narrowed down to the hydraulic control valve .I was wondering if anyone has ever changed one ? and if so .. does the pump have to come out it all cases?? or are some changeable from the large drain plug in the bottom ...?
It would be tight working in there but I think its possible?The plunger (that's what I call it ) that goes internally into the pump section is broke ,its the piece that is connected to the T and has a rod that runs in and out of the pump to raise and lower the 3 point hitch))
Mine broke about 1 inch from where it connets on the t ,
I think the other piece is still in there. Been cold here and ive been working outside so I havn't got any further than that.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
