Posted by Maxwell 99 on January 10, 2014 at 10:21:33 from (199.255.64.153):
In Reply to: manifold replacement posted by s19438 on January 10, 2014 at 01:41:36:
I replaced the one on my 1957 TO35 a few months ago. I bought the manifold from a local small equipment supplier for around $135.
The new manifold had more flash, than the old one.
I also drilled out the manifold exhaust attachment holes. This way, I could install bolts to attach the exhaust pipe to manifold, rather than screwing the muffler flange to the manifold.
I believe these attachment bolts were originally brass bolts.
You will also need the exhaust pipe gasket and a new manifold to head gasket.
If the head to manifold attachment surface is burned out and not flat, you may have to have the head resurfaced.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Talk of the Town: What's in Your Tractor's Toolbox? - by Staff. This recent discussion on the Tractor Talk discussion board here at the on-line magazine drew so much response and proved to be so interesting that we wanted to share it with you here. The names of the people participating in the discussion have been left out to "protect the innocent" (to quote a once-popular television series).
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.