Posted by kopeck on December 04, 2011 at 17:37:24 from (69.50.51.205):
In Reply to: Zenith Carb Problem posted by Uncle Jed on December 04, 2011 at 14:49:11:
Quoting Removed, click Modern View to see
What do you mean by the metering nozzle? The short answer is yes, everything came out and was cleaned. The kit I used didn't include the idle jet or the idle meter screw, I used the old idle jet and got a new meter screw. BTW, the Tisco kit for this carb leaves something to be desired...
I have another 52499d that I had on the shelf. I pulled it apart to stick it in the carb dip and the little idle jet (maybe what you call the metering nozzle?) snapped on of it's ears off coming out. Now I've got to figure that out too. I wonder if they make easy outs that small?
I would like to fix this carb though. It seems like it's the same problem I had before but now it's worse. When I give it the throttle quickly it really pulses for a few seconds before calming down, the old governor rod really get's a work out for a moment.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.