Posted by Gary Hutchinson on October 05, 2009 at 11:08:40 from (192.236.23.112):
I'd like to solve two problems at once, but not sure I'm looking at this the right way. I'd like to build a log splitter and run it off my F560's spare hydraulics. I'd also like to speed up my loader which is something the previous owner cobbled together from a loader from another tractor which was shortened to fit. Part of what he did was to install two 4" diameter cylinders on the lift arms. With the 12 gpm flow out of the 560 pump this makes for slow lifting. I thought about replacing the two 4" dia. cylinders with a couple of 2" dia. of the same length. The smaller cylinders should fill roughly twice as fast as the larger ones and speed up the lift action. Yes, I'll have less lift capacity, but I think it will handle most of what I would ever want to do with my 6' bucket. The 4" cylinders would work great for the splitter with one left for a spare. Any opinions appreciated.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.