Farmall & IHC Tractors Discussion Board |
W-4 Too much torque
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by Sattin on December 13, 2006 at 17:34:41 from (69.40.167.236):
I rebuilt "Nellie"(W-4) last winter soon after that ..(cause of the oil leak) I noticed a loose hub on the axle ..right side. I check it every time before use and it is always loose. ...stands to reason that that side would be the one to loosen ..all that horsepower/torque!! Now ...every time I use the ole gal to bring another load of firewood home for "us" I can hear that axle/hub shuck when ever the torque is reversed!!! I do have a "parts" tractor but with cleaning painting and all else involved, I'm thinkin just spot weld the splines! any thoughts from you gentlemen would be welcome. Rod
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|