Farmall & IHC Tractors Discussion Board |
Re: 400 gas to diesel conversion
[ Expand ] [ View Replies ] [ Add a Reply ] [ Return to Forum ]
Posted by badpenny on July 08, 2006 at 20:07:23 from (69.130.163.10):
In Reply to: Re: 400 gas to diesel conversion posted by Dave Slater on July 08, 2006 at 19:06:30:
Just checked the 450 carcass, there is a hyd pump, but no distributor. Front bolster is complete and intact, air in both tires, too. But no fuel tank. Still needs some cogitating. Head is missing, don't need it.Air cleaner is there and complete. Should be able to figure something out, if I pull the bell housing off the 400 power unit,will it mate up with the clutch housing/ta housing on the 400 gas? Just asking ????s Trying to visualize in my mind what could/should/might work. Thing is, the owner of the 400 diesel only wants $500.00 for the motor and the trailer it sits on. Hard to go wrong at that price. And he claims only 30-35 hours on a complete rebuild. Cogitate some more, sure would be a nice rig if it can be made to work
Replies:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|