Farmall & IHC Tractors Discussion Board |
Ticking sound in the rear end on my 44 H?
[ Expand ] [ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Tanner Clark on April 07, 2005 at 10:10:54 from (206.239.4.3):
Folks. My 44 H starts so easily now it isn't even funny. Now imagine this. I live in Manassas, Virginia in suburbia single family detached homes on .25 acre lots. I fired up the tractor hollared for the wife to come out and get on the back and we made the first voyage on the tractor up and back about 4-6 street blocks. The goal was to deliver a case of beer in the front end loader to a neighbor 3 blocks up from our house. This goal was successfull. The wife decided to stay and talk to the neighbors, so I drove it back to the house. However, here is the reason for my post. After I started the tractor I noticed a metalic clanking sound in the rear end of the tractor. This was after I pulled it up onto our driveway. It was out of gear with the brakes locked on. I was letting it warm up until we were ready to go drive it. I crawled around the rear of the tractor, and the sound seemed to be coming just in front of the brake band area, but on the inside of tractor. I am not sure if I could hear the sound while I was driving the tractor, but I don't think I could hear anything over the roar of the motor anyway. What do you guys think it might be? The sound also sounds like the rain cap on the muffler when the cap raises up and hits the muffler, sorda like that. I don't think it is a terminal issue since the tractor still drove great. I also have no way of just taking the rear end apart to find the problem. So what do you think I should start looking for based on my analysis? Thanks.
Follow Ups:
Home
| Forums
Today's Featured Article -
Oliver 550 Purchaser Checklist - by Greg Sheppard. Pound for pound the 550 is better than anything I've seen. It has great power for its size and can really hunker down and lug. Classified as a 3-bottom plow depending on soil conditions. I personally don't think it can be beat for a utility tractor in the 40 HP range. They are extremely thrifty on fuel, at least my DSL is. Most drive train parts are fairly easy to get. Sheet metal is probably the hardest thing to
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|