Re: can't get IH/md from gas to deisel

Posted by Chuc k's Repair on August 02, 2003 at 17:25:09 from (216.170.58.10):

In Reply to: can't get IH/md from gas to deisel posted by super dave on August 02, 2003 at 13:46:34:

Yes that is enough transfer pump pressure.Try bleeding the high pressure lines at the fuel injector nozzles while it is running on the gas cycle.You may have to advance the throtle lever from the shut off position to accomplish this.Also make sure the starting valves are closing when on the diesel cycle or you won't have enough compression to ignite the fuel.

Follow Ups:

Post A Followup Name: E-Mail: Subject: Re: Re: can't get IH/md from gas to deisel Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]