Farmall & IHC Tractors Discussion Board |
Re: 42 Farmall H progress report....
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Larry W. on May 10, 2002 at 06:12:52 from (216.228.38.54):
In Reply to: 42 Farmall H progress report.... posted by Steven@nd on May 09, 2002 at 20:29:52:
Steven, There are two different length valves for the H depending on the head being High altitude or not. When I had my head reworked, there was a delay because the parts guy ordered the wrong length. Fortunately for me, the machine shop guy caught it before he put the new valves in, and we just had to wait for the replacements. I don't know what will happen when you run it for a while, but I have seen a few now with the longer valves installed, and big nuts shimming the rocker arm to be able to get adjustment, and they ran them that way for who knows how long. Good luck.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|