Farmall & IHC Tractors Discussion Board |
Re: 1948 H
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Steven@nd on March 15, 2002 at 21:00:32 from (12.15.56.219):
In Reply to: 1948 H posted by Mike ISW on March 15, 2002 at 18:48:40:
Busy rebuilding my 42 H. Got the overhaul kit a week ago so the machine shop could start work on the head - new valves, guides, and springs - and press the new bushings into the rods. I also have to have the crank cut .010" both ways, and I had to buy a new manifold. Lucked out and a neighbor gave me almost new 12.4x38 tires for it - will cost over $100 to get them mounted though. Have been tinkering with the main chassis for the last few weeks. All new seals in the rear, new brakes, took apart the liftall and inspected it, welded the drawbar up and installed it today. Took one of my magnetos completely apart tonight and cleaned it all up, put it back together, and it even worked!! Usually I have to put things back together at least 3 times before they work. Hopefully will have her running in about a month. Have to go get a 450 and a W-9 whenever it gets nice and warm and dry. Steven
Follow Ups:
Home
| Forums
Today's Featured Article -
A Farmall Story - by Ed Meadors. The year was 1978. Our young family had recently moved to rural Chesapeake, Virginia to a plot of land which would finally allow us to realize our dreams of a huge garden, critters and more lawn and pasture than we would ever use! We needed a TRACTOR; not a riding mower or tractor wannabe, but a real TRACTOR. The answer to our needs materialized in the form of a '44 Farmall A, complete with cultivators, discs, single plow, a 5ft.Woods belly mower and one, mounted spare 9.00x24 rear wheel.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|