Farmall & IHC Tractors Discussion Board |
Re: Re: Re: Camber or caster
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Farmall Paul on July 03, 2001 at 09:30:42 from (64.254.44.66):
In Reply to: Re: Re: Camber or caster posted by Andy Martin on July 03, 2001 at 07:13:54:
Hey Guys- Dick wants to really impress his wife with information, so let's take it a step further. The distance below (or above) the ground where the king pin angle and camber angle intersect is called the 'scrub radius'. Also, the combined angle (king pin and camber) is called 'steering axis inclination'! Scrub radius should be below the tire/ground contact point at a distance determined by weight, tire size and performance specifications. I won't go into that here. Have fun! Paul+
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|