Farmall & IHC Tractors Discussion Board |
Re: Farmall A (PTO/belt drive)
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by Red Dave on April 12, 2001 at 05:30:50 from (208.165.46.34):
In Reply to: Farmall A (PTO/belt drive) posted by Todd Davis on April 12, 2001 at 04:19:59:
The PTO & belt pulley were options and many don't have them. You should be able to get one from a salvage yard and install it on your tractor. Maybe somebody else can confirm this, but, I don't think there is any reason that it wouldn't work. The super A hydraulics won't work on an A because of the difference in the block casting where the Hydraulic pump mounts. Many different methods were used to add hydraulics to A's & B's. Some ran it off the PTO or belt pulley. Sometimes a pump was mounted on a bracket along side the motor and ran it off a belt from the fan pulley. I would suggest the fan belt drive because it makes the system "live". From what I've seen, there are as many different ways to do it as there are imaginations.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|