Farmall & IHC Tractors Discussion Board |
Re: narrow front 1066
[ View Follow Ups ] [ Post Followup ] [ Return to Forum ]
Posted by George 2 on March 19, 2001 at 15:50:11 from (216.46.140.186):
In Reply to: narrow front 1066 posted by Jeff on March 18, 2001 at 20:43:14:
Both the 66 and 86 series were available from the factory with the narrow front bolster. This setup had the steering cylinder in the front bolster like the 06 and 56 series. All of the front wheel drive ones were shipped this way. That 1066 more than likely was a MFWD model and the old American - Coleman MFWD was probably discarded when the owner found out what it would cost to repair it after the seals failed and moisture got into it. I have seen several where the MFWD was removed and either tricycle or 06 wide fronts were installed. The TACO 86's that I've seen were all equipped that way. I have only seen two tractors originally equipped with the tricycle bolster and wide fronts like the 1456. They were both 766 models and one was owned by a canning company.
Follow Ups:
Home
| Forums
Today's Featured Article -
The 8N and the Fox - by Zane Sherman. Dec. 13 1998, Renfroe, Alabama. Last niht I dreamed about the day that I plowed the field of about 10 acres over on what Jimmy and Dandy called the Ledbetter field. I was driving the 1948 8N Ford tractor that Jimmy bought in 48 new This was prebably in about 1951 and maybe even befor the house was built. This would have made me to be about16 years old and I drove the tractor for nothing and would have paid to drive it if I had had any money which I didn't, but neit
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
Copyright © 1997-2024 Yesterday's Tractor Co. All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V. Yesterday's Tractors - Antique Tractor HeadquartersWebsite Accessibility Policy |
|