Posted by MrBigDave on January 30, 2017 at 20:39:46 from (73.140.146.248):
Hi all, newbie here, first post after searching. So I picked a Case 310g Dozer with a 6-way blade and winch on the back this last summer for a backyard project. It needs a little TLC but it works for the most parts. One thing I noticed was the generator is not connected as both wires are cut. I found the other ends of the wires going to the regulator but there is not enough wire between them to connect. I am wondering why it was cut in the first place and am hesitant about just connecting them. So far it starts up ever time but I can only think the 2 batteries in it are not being charged and I will eventually have to do something about this. Saw in the parts section on this site a universal bracket to converting to an alternator. Has anyone done this? Simple, complicated? What do I need to do to make this happen other than the bracket and an alternator?
Any and all help would be greatly appreciated.
Here is a little video my took of me moving some logs.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - The Tractor Parade: Story of a Case SC - by Bernie DeLon. On a early fall morning back in 1994, I opened the newspaper and happened to spy an article about a local antique tractor club having their annual show that weekend.
... [Read Article]
Latest Ad:
Sell 1958 Hi-Altitude Massey Fergerson tractor, original condition. three point hitch pto engine, Runs well, photos available upon request
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
