Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Powershift of a Case 870

Welcome Guest, Log in or Register
Author 
Bob P.

02-04-2008 06:14:36




Report to Moderator

We want to use a Case 870 for tractor pulling. Does anybody know how much horse power a powershift of such a case can handle?




[Log in to Reply]   [No Email]
JHH

02-06-2008 04:33:02




Report to Moderator
 Re: Powershift of a Case 870 in reply to Howard H., 02-04-2008 06:14:36  

Here are a couple of pulling pics

third party image third party image



[Log in to Reply]  [No Email]
JHH

02-05-2008 15:42:04




Report to Moderator
 Re: Powershift of a Case 870 in reply to JMS/.MN, 02-04-2008 06:14:36  
We screwed our up to 125 and the torque limiter clutch will slip when you pull it down to about 1700 rpm's. To fix that you bolt the torque limit clutch solid. If the powershift cluthes slip you can increase the pressure on the clutch circuits. I don't know what slips or breaks after that, there is always a limiting factor. see video below!

Link

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy