Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Talk Discussion Forum

Old iron on the job everday!

Welcome Guest, Log in or Register
Author 
ShepFL

09-06-2005 23:51:39




Report to Moderator

third party image

While up in the North Woods or is that Nawth Woods of NH ran across this rig earning its keep day after day. They claim the "Jacob's Ladder" part of the Mt. Washington grade is 37%. Folks that is steep. Just sharing some other old iron pics. More to follow when I rtn to FL.

PS - Les, I will still be in touch!
ShepFL

[Log in to Reply]   [No Email]
Bill(Wis)

09-07-2005 17:05:07




Report to Moderator
 Re: Old iron on the job everday! in reply to ShepFL, 09-06-2005 23:51:39  
Those engines use one ton of coal and 1000 gal of water for each climb. Fireman is kept pretty busy on the way up which takes over an hour. Ride down is free of course thanks to gravity. The brakes on the car I was on were fully capable of stopping the car and it's not attached to the engine. They've been doing this since 1869. The last engine was purchased in 1984 (I think).



[Log in to Reply]  [No Email]
Coldiron

09-07-2005 15:44:30




Report to Moderator
 Re: Old iron on the job everday! in reply to ShepFL, 09-06-2005 23:51:39  
I like the way they set the boiler so the water level would be covering the tube sheet and be easier to read the true level during the climb. Apparently they back it down the grade so the boiler water is readable. Bet firing that baby is a hoot.



[Log in to Reply]  [No Email]
dr.sportster

09-07-2005 12:56:52




Report to Moderator
 Re: Old iron on the job everday! in reply to ShepFL, 09-06-2005 23:51:39  
I was on the piece of junk thing once all run by high school guys.A kid was giving a talk on the way up.Hot cinders were coming in the window loud clunking noise from the cog gear.The kid said "any questions" I said" yes how many people have been killed on this thing".Everybody in the passenger car turns around and gives me a dirty look.Then the kid says" twelve people have been killed if you lose the piston you go down the mountain backwards real fast".It sure beat hiking up anyway.

[Log in to Reply]  [No Email]
Stan - Florida

09-07-2005 04:28:52




Report to Moderator
 Re: Old iron on the job everday! in reply to ShepFL, 09-06-2005 23:51:39  
Shep,

You're absolutely right about that grade on Mt. Washington! Have you seen the wheat fields on the hills of the Palouse in southeast Washington State? I was told, by a couple of different wheat farmers, that those hills are 50% grades.

Hillside combines and triple-wheel 4WD tractors are the norm. I was also told that not many tractors turn over, but some have been known to slide down the hills.

Stan (Melbourne)

[Log in to Reply]  [No Email]
Hal/WA

09-07-2005 13:41:03




Report to Moderator
 Re: Old iron on the job everday! in reply to Stan - Florida, 09-07-2005 04:28:52  
And it is a REAL SPOOKY feeling to slide sideways in a combine!



[Log in to Reply]  [No Email]
Stan - Florida

09-07-2005 17:20:14




Report to Moderator
 Re: Old iron on the job everday! in reply to Hal/WA, 09-07-2005 13:41:03  
Hal,

Are you from that area? Do you know what is considered a "good" yield of wheat there? Not a "bumper crop" yield or a "poor" yield...just a good, average yield.

I heard some numbers from the guys I talked to that sounded pretty outstanding to me...like 90 bushels or more.

Thanks,

Stan



[Log in to Reply]  [No Email]
Robert E. Smith

09-07-2005 15:33:50




Report to Moderator
 Re: Old iron on the job everday! in reply to Hal/WA, 09-07-2005 13:41:03  
I hear that Hal!
Trying to cross a creek from one field to another in a 7700 John Deere with a 6 row head The rear end came off the ground! So backed up and tryed a different angle, rear end tipped again (you know what was getting tight about now!)So backed up for another run at it!
This time evrything was looking good! that was till she tipped up again only this time not only did the back wheels come off so did one of the front and the whole thing spun around on one wheel! She was heading over on her side down the creek bank when lucky for me the auger caught on a tree and stopped the whole thing in it's tracks!
And yes something was sucking cotton about then!
Tied the 4440 to the rear with a chain and drug it out of there! Got the track loader out and fixed that bank before going back across it!
Don't you just love rented ground!
Bob

[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy