TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Clinton Engines Corp. Maquoketa Iowa USA

Welcome Guest, Log in or Register

Author

David Southward

09-05-1999 12:04:34

Report to Moderator

I need an operators manual and supplier of spares for a Clinton Model 400 0160 088 single cylinder petrol engine.

Can anyone help?

[Log in to Reply] [No Email]

Tim Peterson

08-14-2002 08:52:13

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have been given a old scooter. I think it is a IS4. The engine is a Mod. # E65 1101, Ser. # S401 02049.

1. Do you still make carbs for this engine? If so were can I buy one? I'm in Boise, Idaho.

2. Can I buy a service manual and or parts manual for this engine ?

3. Do you know if I can find the company who made the scooter ?

Tim

[Log in to Reply] [No Email]

TODD DEGLER

07-24-2002 03:15:42

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I HAVE A SMALL OUTBOARD MOTOR MODEL#J9 1105 SERIAL#56951 AND I NEED A FUEL LINE FROM MOTOR TO ENGINE.. DOES ANYONE KNOW THE HORSEPOWER RATE FOR THIS MOTOR?

[Log in to Reply] [No Email]

TODD DEGLER

07-24-2002 03:14:57

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I HAVE A SMALL OUTBOARD MOTOR MODEL#J9 1105 SERIAL#56951 AND I NEED A FUEL LINE FROM MOTOR TO ENGINE.. DOES ANYONE KNOW THE HORSEPOWER RATE FOR THIS MOTOR?

[Log in to Reply] [No Email]

todd degler

07-26-2002 03:39:00

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to TODD DEGLER, 07-24-2002 03:14:57

need to know H.P. rateing for motor and if i could find a fuel line for it,model j91105 serial#56951

[Log in to Reply] [No Email]

R. F. Rohmer

07-21-2002 13:12:08

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Need a Carburetor for a Clintion Engine (Four Cycle cast iron engines) Year and Big Wheel model # not known, on a Yazoo Lawnmower. If you know where to order please send information to email.

Thank you.

[Log in to Reply] [No Email]

Mark T. Beck

07-13-2002 19:09:44

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have a K-350 6000 series clinton outboard motor
(3.5 H.P.) which has NEVER been started.
I would like to find out what year it was manufactured.I also have the manual no. 137-775
for this outboard.I'm also interested in possible seeling.Any help would be greatly appreciated.

[Log in to Reply] [No Email]

Donald A Schmitt

05-02-2002 09:37:26

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I was looking for info on a outboard motor made by clinton engines corp.If it was not made by you do you know who I can contact.

[Log in to Reply] [No Email]

mike

04-30-2002 17:49:14

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

i'am looking for an impeller (water pump) for a late modle 5hp clinton outboard moter (boat) if you know how to find one let me know .thank you mike!!!!

[Log in to Reply] [No Email]

Ben Hunter

04-26-2002 13:42:46

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have an old Wards Sea King 3.5hp outboard motor.
I don't know how old it is. Does anyone out there have a repair manual or know the gas/oil ration for this motor? Any help would be greatly appreciated. Thanks, Ben Hunter 310 E. Hanna Ave. Tampa, Florida 33604

[Log in to Reply] [No Email]

Elton G. Grice

04-22-2002 04:58:15

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Is this Clinton Engines the same company that made
Sea King marine engines for Wards.

[Log in to Reply] [No Email]

Brian G.

05-19-2003 15:46:11

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Elton G. Grice, 04-22-2002 04:58:15

I don't want to make claims about every engine out there made by Clinton Engine Corp. and/or every Montgomery Ward Sea King engine out there, but I will verify that Clinton Engine Corp. DID indeed make SOME engines for Montgomery Ward's Sea King outboards. I have a 7.5HP Sea King outboard that was made by Clinton Engine Corp. and from what I've been finding out, my outboard was probably a 1978 model year or close to that. I've been having some trouble coming across replacement parts and/or a way to contact Clinton Engine Corp., but once I find out, I will try to let some of these online forums know!

[Log in to Reply] [No Email]

cynthia

04-02-2002 21:26:21

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

i got me a single cylinder 2 its on one of them rotoillers..... ..... yers run????? ?????

[Log in to Reply] [No Email]

Jeremy Puterbaugh

03-22-2002 06:12:53

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have the # for clinton engine corp., the # is 1-563-652-2411, contact them.

[Log in to Reply] [No Email]

Brian G.

05-19-2003 16:10:42

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Jeremy Puterbaugh, 03-22-2002 06:12:53

Thanks for getting that phone number posted up here. I just tried calling it and I got an answering machine that didn't explain what business the phone number was for, but I'll try it again tomorrow when it is before 6:00pm. I noticed that this post was in 1999, has anyone else called this number and gotten ahold of Clinton Engine Corp. at this number since then?

[Log in to Reply] [No Email]

geo

09-26-2003 15:22:26

Report to Moderator

Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa U in reply to Brian G., 05-19-2003 16:10:42

I called today. That is a working number. Talked with Bill Mayberry, the company is still in business and still have parts.

[Log in to Reply] [No Email]

Bernie lamm

03-27-2004 14:20:39

Report to Moderator

Re: Re: Re: Re: Clinton Engines Corp. Maquoketa Io in reply to geo, 09-26-2003 15:22:26

I,need a head gasket for engine #10578455 A
426 0100 024 it's a 8.3 cu in. engine.
My dealer has had it on backorder for a month.

[Log in to Reply] [No Email]

Chris Klare

03-05-2002 11:26:01

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have an Ward's Sea King Engine made by Clinton Engines Corp. The serial # 390158, the model # 1350 1106, and the type # is XTV 27003. I need a carb rebuild kit for it. Do you have one, and if so tell me how much and/or how much for a new carb for it. Thanks Chris Klare

[Log in to Reply] [No Email]

Steven McKern

01-17-2002 09:56:16

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I need to now if there are still manuels and parts for a go cart engine. Serial # 988684 1 b
Model # 404 0100 022. MFD by Clinton Engines Corp. E-Mail is stevenmckern@hotmail.com

[Log in to Reply] [No Email]

Steven McKern

01-17-2002 09:51:06

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I need to now if there are still manuels and parts for a go cart engine. Serial # 988684 1 b
Model # 404 0100 022. MFD by Clinton Engines Corp.

[Log in to Reply] [No Email]

Roe B. Lane

11-25-2006 17:15:54

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Steven McKern, 01-17-2002 09:51:06

I have the parts manual for the 404 0100 and a very few parts. parts manual $5.00 which includes S & H. Selected Service manual for the 404 would be $20.00. There are a few other people with some parts for the Clinton.

[Log in to Reply] [No Email]

Konrad

07-19-2006 09:16:22

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Steven McKern, 01-17-2002 09:51:06

I seek any informations About clinton engine serie H 404. I have Clinton H 404 0304-002-263 Horyzontoal crankshaft,4 HP?

[Log in to Reply] [No Email]

Robert Fox

01-04-2002 02:14:53

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Have Been Looking For A Clinton Engine Dealer Sign. Can Anyone Help

Thanks Bob

[Log in to Reply] [No Email]

MICHAEL G. MILLER SR

12-09-2001 15:36:24

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I HAVE SEVERAL ANTIQUE CLINTON ENGINE PARTS BOTH NEW AND USED.. I WISH TO DEPLETE MY INVENTORY..PLEASE CONTACT ME BY E-MAIL IF ANYONE CAN HELP..

[Log in to Reply] [No Email]

George Harris

09-25-2003 15:53:25

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to MICHAEL G. MILLER SR, 12-09-2001 15:36:24

I need a flywheel for a Clinton J-8 (Apache) 5hp outboard motor. Serial #77666. Model J8 1106. Please contact me if you can help.

[Log in to Reply] [No Email]

Curt Baker

09-12-2003 22:01:07

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to MICHAEL G. MILLER SR, 12-09-2001 15:36:24

I have a Clinton Boat Motor that I need some parts for if any thing is available. Model#K500-3108C Ser #1052638 Type XTV 52250 The part I need the worst is a water pump impeller And drive pin for it. any help would be appreciated
Curt Baker
64300Penny Rd.
Coos Bay, Oregon
97420
1-541-888-4503

[Log in to Reply] [No Email]

Grady

07-03-2003 22:08:24

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to MICHAEL G. MILLER SR, 12-09-2001 15:36:24

I have a sea king 7.5 with electronic ignition.I need the electronic igintion parts, coil, coil wire ect..Can you help? Thanks..Grady...

[Log in to Reply] [No Email]

Brian G.

05-19-2003 16:13:15

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to MICHAEL G. MILLER SR, 12-09-2001 15:36:24

I'll buy parts to fit Montgomery Ward Sea King / Clinton Engine Corp. (9PK 751 6000 SER) if you have anything to fit. Looking for a coil currently. Thanks.

[Log in to Reply] [No Email]

mike liberio

12-29-2001 07:48:38

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to MICHAEL G. MILLER SR, 12-09-2001 15:36:24

Dear sir I am looking for a exhoust muffler for a small 2 cycle 3 hp engine M#moo 500 0300 014. I believe the part I am looking for is P# 170-15,It belongs ro a snowmobile,I am looking for the origional muffler and or something i can use to extend the muffler down to the base of the engine stang.
Thanks
Mike Liberio

[Log in to Reply] [No Email]

Forrest Kreisher

10-29-2001 13:37:27

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I am looking for a coil for an electronic ignition. No. is 288-0039-500

[Log in to Reply] [No Email]

Eugene Gagnon

07-29-2001 16:31:33

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Hi!
I got last week a motor for boat.
model: K200 2000 A
Serial: 750221

It is possible to get an operators manual and supplier of spares or service for this model in the area of Montreal,Quebec,Canada.

It is written on the tank the following instructions for the gaz mix.
Oil SAE 30 � pint for 1 gallon of gaz.

It means a ratio of 8:1 It is possible?

Thanks in advance for your your help.

Eugene Gagnon
Laval,Quebec
Canada
(450) 662-3670

[Log in to Reply] [No Email]

Joe Sollowin III

07-21-2001 16:14:20

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Need parts for ~1969 horizontal shaft 3.5HP Clinton engine i.e. points, cond, gaskets & valves?

Please reply..... ..... .

[Log in to Reply] [No Email]

ricky

04-28-2001 12:51:28

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

i was wondering i going 2 buy this motor but i wanna know the hp on it i have the serial nuber its 1235691 b model number is a400 1111

[Log in to Reply] [No Email]

rick

04-15-2001 18:14:31

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have lots of Clinton Engine Parts in the original packages. Anyone interested? Rick

[Log in to Reply] [No Email]

George Harris

09-26-2003 06:35:59

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to rick, 04-15-2001 18:14:31

I need a flywheel for a Clinton J8 (Apache) 5hp outboard motor. Serial #77666. Model J8 1106.If you can help me, please e-mail me at geo4esp@gvtc.com.

[Log in to Reply] [No Email]

Brian G.

05-19-2003 16:36:40

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to rick, 04-15-2001 18:14:31

Yea, I'll take a coil and the cable/wire that connects it to the actual spark plug if you have them. Let me know, briang@pixelborn.com.

[Log in to Reply] [No Email]

Randy

01-03-2002 17:46:45

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to rick, 04-15-2001 18:14:31

rick, please get in touch with me. i have a 4.5 hp vert. shaft. need gaskets etc. for rebuild.

Randy

[Log in to Reply] [No Email]

Russ

09-17-2001 18:36:54

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to rick, 04-15-2001 18:14:31

Rick...Yes!!! I'm very interested in the Clinton parts that you have...Please email asap!Swishark@aol.com

[Log in to Reply] [No Email]

J. Scott Gaines

05-06-2001 15:35:53

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to rick, 04-15-2001 18:14:31

I am trying to find a replacement carburator for an older Clinton outboard.

The motor is a 5.5hp/136cc, single-cylinder, air-cooled, two-cycle model of an unknown year.

Model#: K 505 6000B
Serial#: 1610410

Can you help?

Thanks,

JSG

[Log in to Reply] [No Email]

Roberto Molina

04-09-2001 16:06:47

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Hi, I'm looking for a manual and parts for a 7.5 hp Clinton outboard motor sold under the Montgomety Ward name. The model number is K750 3107D. Thanks!!!

[Log in to Reply] [No Email]

JFWHITLEY

04-04-2001 06:21:30

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Dear Sir,
I have a soil tiller powered by a Clinton 400 engine and urgently need to find a replacement. Can you inform me of engine agents in theUnited Kingdom or even better, Scotland? Sorry to bother you with this but the growing season is upon me and my tiller is needed urgently.

Many thanks,

John Whitley

[Log in to Reply] [No Email]

ron

04-02-2002 21:32:47

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to JFWHITLEY, 04-04-2001 06:21:30

you have soil tiller too.. seems we are the only in the world!!!!! !!!

[Log in to Reply] [No Email]

Jose Rodriguez

03-29-2001 18:12:14

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I would like information in a centaur
minibike that i have in my possetion
and the engine shows that your the
manufacture of the engine so i would
like your help thank you for your help

[Log in to Reply] [No Email]

George Humes

03-18-2001 08:55:35

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have a outboard motor and I would like any information about it that you might have, the following is on the data tag, Clinton Engines Corp. Maquoketa, Iowa, model# J9 1100, serial# 22335. Thank you

George Humes

[Log in to Reply] [No Email]

David C.Chancel Sr.

02-18-2001 15:34:03

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have one of your montgomery ward engines and I need a part for it.It is a model# k7514106a Serial #1194369 Type xtv 50475 a The part I need is not in the engine itself but in the lower drive section just below the motor. Thank you. David C. Chancel Sr.

[Log in to Reply] [No Email]

charles woods

12-29-2000 09:53:09

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

i need a head gasket for a 5 hp clinton motor that is on a jump starter that i use on my tow truck it is a cast motor side shaft any info.would be great thank you

[Log in to Reply] [No Email]

schalk human

01-01-2001 07:53:06

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to charles woods , 12-29-2000 09:53:09

I need a price on a carberator for a clinton 5hp petrol engine(model 45) and a set of piston rings part number 233-113-5. I would appreciat it if you could send me a pricelist on all parts.I live in South Africa and would also want to know what shipping would cost.

Thank you
Schalk Human

[Log in to Reply] [No Email]

MIKE HICKS

11-26-2000 20:10:33

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

i have aold clinton outboard engines ineed to find out what size the engine is serial #1o7865 model #j911o1 the nameis chief on the side of the cover

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:22:37

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to MIKE HICKS, 11-26-2000 20:10:33

Parts and literature available from Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

Don Kirkpatrick

12-11-2000 12:44:25

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to MIKE HICKS, 11-26-2000 20:10:33

Can you tell me if Clinton made the Seaking outboard motors for Montgomery Wards? Will M. Wards still sell parts?

Thanks,

Don K.

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:26:38

Report to Moderator

Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Don Kirkpatrick, 12-11-2000 12:44:25

Clinton made some of the Sea Kings. Parts and literature available from Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

Gilles Legault

10-07-2000 09:45:44

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Do you have information on lawn mowers from aproximately 60 years ago?
If so do have have a web site ?
Thanks for any information you may have.
P.S. Is there any CANADA sites?

[Log in to Reply] [No Email]

James Sleigh

10-01-2000 20:25:57

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Back on the Isle of Skye in Scotland, I own a Clinton outboard
engine and need a couple of spares. About 10 years
ago, after much searching, I did track down a
company in Toronto which sold me the propeller
I needed. But I just cannot remember the name of
the company, and Clinton is not listed in the
Toronto 'phone books. Can someone help? With many
thanks. James.

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:19:22

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to James Sleigh, 10-01-2000 20:25:57

Parts and literature are available from Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060, USA

[Log in to Reply] [No Email]

James Sleigh

10-09-2000 20:29:46

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to James Sleigh, 10-01-2000 20:25:57

I may have forgotten to tick the box asking that
I be notified if anyone responds to my query about
Clinton outboard spares. Thanks. James Sleigh:
jameslei@toronto.enoreo.on.ca

[Log in to Reply] [No Email]

david Chancel

09-20-2000 15:12:10

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I am looking for a diagram for model no.k7514106a serial no.1194369 type no.xtv50475a if you can help me with this i would greatly appriciate it thank you for your time

[Log in to Reply] [No Email]

charles houston

10-07-2001 15:11:09

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to david Chancel, 09-20-2000 15:12:10

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:32:24

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to david Chancel, 09-20-2000 15:12:10

Parts and literature available from Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

Ron Messier

09-19-2000 17:09:27

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I was wondering if you could supply me with info for this Clinton motor i have on my snowblower, This motor still runs good and nothing has been done to it, It is all original,I am looking to replace it with something new and was wondering what the horsepower of this one is, was told that nobody has parts or a listing of parts for the motor is to old, Could you give me the date of manufacture, H.P., and if it is worth anything, Serial #2561444 D Model # 800 COD by Clinton Machine Company Please reply, Thanks

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:35:30

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Ron Messier, 09-19-2000 17:09:27

Stick with the Clinton, it's better than what you get today. Parts and literature available from Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

Brenda Ernest

09-14-2000 11:34:42

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Trying to find Parts and information on a Sea King Boat Motor Model No. XTV52319A.

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:37:23

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Brenda Ernest, 09-14-2000 11:34:42

Try Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

JEFF HOWARD

08-29-2000 09:46:24

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I,M LOOKING FOR PARTS FOR A OUTBOARD BOAT MOTOR.MODEL# K7503107D. SEC.NO. 998610 TYPE XTV52207.

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:39:16

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to JEFF HOWARD, 08-29-2000 09:46:24

Try Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

tom waldren

07-11-2000 22:16:05

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

i am looking for info about clinton engines boat motors, need some parts and possibly a repair manual, if anyone has any info it would be greatly appreciated

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:41:28

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to tom waldren, 07-11-2000 22:16:05

Parts and literature available from Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

Ken M

05-31-2000 20:31:33

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Help!!!!

I need a replacement gear for the lower unit for the prop on my father-in-law's Montgomery Ward / Seaking solid state ignition 7.5 hp outboard motor. Made by Clinton Engines Corp.

Model #:K7515106B
Serial #:1511317
Type #:XTV50575B

if anyone has any info on how i could get this part please email me at zeppelin711@hotmail.com.

thanks for your time..

[Log in to Reply] [No Email]

jim nelson

08-25-2002 22:30:25

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Ken M, 05-31-2000 20:31:33

I AM LOOKING FOR A GAS LINE COUPLER THAT GOES TO AN OLDER CLINTON OUTBOARD MOTOR SAY AROUND A
5 HP. I AM GUESSING.

[Log in to Reply] [No Email]

Gary Otto

03-08-2003 18:14:48

Report to Moderator

Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to jim nelson, 08-25-2002 22:30:25

Can anyone help with finding a water pump for a 1975 Seaking 7.5 Model number K7503113D Serial Number 1070803.

[Log in to Reply] [No Email]

Mark T. Beck

08-06-2002 17:27:21

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Ken M, 05-31-2000 20:31:33

I have a 6000 series K-350 clinton outboard
motor 3.5 H.P.
This engine has never been started.
I would like to find out what year it was manufactured and if possible it's value.

[Log in to Reply] [No Email]

Jan Higgins

09-15-2001 07:52:35

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Ken M, 05-31-2000 20:31:33

Hello need help with a Clinton chain saw, the saw has all the markings and numbers. Looking for some one with info on these saws. Please some one help me. Thank you Jan

[Log in to Reply] [No Email]

Hal Beaupre

09-23-2000 14:23:47

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Ken M, 05-31-2000 20:31:33

I am trying to find an oil seal for the prop shaft of a Clinton outboard motor. Model W-100, 9.9 HP Serial #32010. Any help would be greatly appreciated.

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:45:19

Report to Moderator

Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Hal Beaupre, 09-23-2000 14:23:47

Try Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

Hal Beaupre

09-10-2000 16:39:10

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Ken M, 05-31-2000 20:31:33

I am looking for the following parts for a Clinton Outboad Motor W-100 9.9HP
A oil seal for the prop shaft, and a O-ring for the housing that the oil seal fits in.

[Log in to Reply] [No Email]

Wayne Mckillop

08-03-2000 17:43:16

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Ken M, 05-31-2000 20:31:33

I need prop for a 3.5 sea king,montgomery ward and nut,pin to secure it. Thanks Wayne

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:48:40

Report to Moderator

Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Wayne Mckillop, 08-03-2000 17:43:16

Try Clinton Engines Corp., Clark and Maple St. Maquoketa, IA 52060

[Log in to Reply] [No Email]

Ben

07-30-2001 07:37:52

Report to Moderator

Re: Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Max Koone, 12-17-2000 22:48:40

Does anyone know where I can get the hose that runs from the external fuel tank to the engine on a Clinton/Peerless 5 HP? The fitting is pretty unique and no marine shops in my area have ever seen it.

[Log in to Reply] [No Email]

John D. Cyrus

05-24-2000 10:21:06

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I recently aquired an out board motor and it says that it was manufactured by Clinton Engines Corp .The Model# is K700 2107A,the serial# is 647476, the type #is 6027370R. I was interested in a operations and parts manual can yuo help me ? Thank you

[Log in to Reply] [No Email]

Jim Parker

01-04-2002 17:28:48

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to John D. Cyrus, 05-24-2000 10:21:06

I have a Clinton Outboard "Sportsfisher". Serial #351011, Model #1500 1108A. Inherited from my Dad, I'm looking for information on it. Any help? Thanks

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:51:20

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to John D. Cyrus, 05-24-2000 10:21:06

Try Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

David viszneki

03-12-2000 13:02:50

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

I have 2 outboard motors 1 has model no.K7535106B type no.xtv52307B can anybody tell me anything about this motor and horsepower.the outher motor is a 6 horsepower 2 cyl.fully encased and i need a prop.both are mont.ward sea kings.but i lost the cover for the 6hp and there is no other markings or numbers.can anybody help.thank you

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:04:44

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David viszneki, 03-12-2000 13:02:50

Parts and literature available from:Clinton Engines Corp., Clark and Maple St., Mauquoketa, IA 52060

[Log in to Reply] [No Email]

Rick

03-07-2000 16:22:31

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

can you help me with finding a carburator kit for a mongomery wards 7 hp. boat motor sea king model#k7002107a
serial#658507
type#6027370r

[Log in to Reply] [No Email]

Ray V. Smith

01-31-2001 13:31:16

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rick, 03-07-2000 16:22:31

Are parts available for the Clinton A400 Engine?

[Log in to Reply] [No Email]

Max Koone

12-17-2000 22:53:48

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rick, 03-07-2000 16:22:31

Try Clinton Engines Corp., Clark and Maple St., Maquoketa, IA 52060

[Log in to Reply] [No Email]

daniel dwyer

06-15-2003 04:54:42

Report to Moderator

Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa U in reply to Max Koone, 12-17-2000 22:53:48

looking for a high quality engin for a snapper mower deck
thank;
dan dwyer

[Log in to Reply] [No Email]

Rich Prince

01-15-2000 21:02:01

Report to Moderator

Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to David Southward, 09-05-1999 12:04:34

Dear David I am the quality auditor at Clinton Engines and we may have the original parts for your engine, I know we will have any technical information you need for any repair.
email me at CEPCOparts@aol.com with any question or for part information, make sure you have all the serial numbers because of updates & changes.
you can call 1-319-652-2411 or Fax 1-319-3427
write to CEPCO P.O.Box 860 Maquoketa, Iowa 52606-0860

[Log in to Reply] [No Email]

George Harris

09-25-2003 16:38:12

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rich Prince, 01-15-2000 21:02:01

Mr.Prince: I need a flywheel for a Clinton J-8 (Apache)5hp outboard motor. Serial #77666. Model J8 1106. Please e-mail me if you can help. Thank you.

[Log in to Reply] [No Email]

David Trueman

05-30-2003 14:20:34

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rich Prince, 01-15-2000 21:02:01

The connecting rod on my clinton engine has broken. Any ideas where I can get a replacement. Not a lot known about the engine except:
model: 494 0101 \ 048
ser no. 10354422 B
con rod has no. 6022 - 2A

[Log in to Reply] [No Email]

jeff

05-26-2003 18:57:30

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rich Prince, 01-15-2000 21:02:01

dear sir.ive found a clinton outboard,model#j911o1 serial#67717..question:whats the h.p? what year is it? thanks jeff....

[Log in to Reply] [No Email]

william Dawson Jr.

03-05-2001 04:52:06

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rich Prince, 01-15-2000 21:02:01

Dear sirs, I need an oil bath air cleaner complete for an clinton 700A cast iron engine . could you let me know if you have one and how much . thanks Best regards Bill...

[Log in to Reply] [No Email]

Marvin Ferguson

09-24-2000 12:41:08

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rich Prince, 01-15-2000 21:02:01

I have a Clinton engine, model 350, serial number 0165590 E and would like to know if parts are available for this engine. Also any literature that would be helpful.

[Log in to Reply] [No Email]

doug

04-27-2000 16:15:15

Report to Moderator

Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to Rich Prince, 01-15-2000 21:02:01

can some one please help me find parts for my 5hp sea king model# k550-4106A my email is ak.doug@gci.net

[Log in to Reply] [No Email]

Dave

10-24-2000 15:57:31

Report to Moderator

Re: Re: Re: Clinton Engines Corp. Maquoketa Iowa USA in reply to doug, 04-27-2000 16:15:15

try www.boathouse.ohgolly.com, they are helping me with mine, K500 1106A

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy