Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Tractor Pulling Discussion Forum

CORRECTION 4/15-4/17

[Show Entire Topic]  

Welcome Guest, Log in or Register
Author 
colekicker

03-27-2005 20:25:00




Report to Moderator

Its bad when you make mistakes after proofreading.




[Log in to Reply]   [No Email]
haymark

03-28-2005 05:49:15




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to colekicker, 03-27-2005 20:25:00  
Where exactly is Burton, TX ?



[Log in to Reply]  [No Email]
colekicker

03-28-2005 13:51:24




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to haymark, 03-28-2005 05:49:15  
Burton is 15 min west of Brenham on Hwy 290. It is about halfway between Houston and Austin. Town of about 350 has 20,000 people pass through in one weekend. Lots of spectators and plenty of stuff for the wives or girlfriends.



[Log in to Reply]  [No Email]
The Farmall

03-29-2005 14:52:39




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to colekicker, 03-28-2005 13:51:24  
What are the details for the pull in July? Is it going to be like usual. Dont think we are going to make Burton unless there is a miracle, doing rearend work on the tractor and beginning to make parts for the Diesel.



[Log in to Reply]  [No Email]
JDGnut

03-29-2005 20:26:48




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to The Farmall, 03-29-2005 14:52:39  
Woohoo.. a Diesel Farmal H... I can"t wait to see it... haha.. some how I think it will be in a little later model trim... 1066, 86??? 3???.... Going to be a learning year.... JDGnut



[Log in to Reply]  [No Email]
colekicker

03-29-2005 15:36:22




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to The Farmall, 03-29-2005 14:52:39  
Come on man!!!! You gotta make Burton. You know you want to hook to the big sled. I understand the rearend work though, sometimes its gotta be done. The pull/show in July is gonna be at the Washington County Fairgrounds. TATPA is putting on the pull with us. Both pull tracks will be completely covered.



[Log in to Reply]  [No Email]
The Farmall

03-30-2005 06:24:34




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to colekicker, 03-29-2005 15:36:22  
Diesel Farmall H, too small, 66 series all the way, its a clasic, got a new rear and getting ready to take the old tranny off the old pro stock. Got the needle cross back and the new clutch. working on getting the new motor cleaned up so it can be built. Building a jig to hold a saddle saw to cut the tubes for the frame. WE figure it is going to get built to Super Farm Specs and then all we have to do is put our old engine back in, big tires, big turbo, and big pump, and head north when that time comes. For now there is a mad push on the H, to many goodies laying around and not on the tractor yet, sure would be nice to have an antique SuperStock Class.

[Log in to Reply]  [No Email]
JDGnut

03-30-2005 12:25:05




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to The Farmall, 03-30-2005 06:24:34  
SuperStock Antique Class.. Hmmm... JD G on Alky with a set of Tiwn Turbos.. some how I don"t see the Ol tractor holding together... haha.. I can"t wait to see a real tractor pull... There are going to be a few Outlaw pulls in TX this year... Maybe Big Ol Red would make a few??? I like the 66-86 sheetmetal... but like the green better.. haha... What is the first pull you think you will make with the H??? JDGnut

[Log in to Reply]  [No Email]
The Farmall

03-31-2005 06:47:15




Report to Moderator
 Re: CORRECTION 4/15-4/17 in reply to JDGnut, 03-30-2005 12:25:05  
Hum, Lets see when I think of green I think of, baby $#!^, boogers, etc. hahahahahahahah. Seriously the Green cleaned up at the Farm show this year. Dont know if we are going to be able to run with outlaw because they dont have a class for our tractor and putting the old stuff back together is going to be a while but It will scream none the least with the tatpa sled and cant wait till we get to hook to the burton sled and really pull some weight. Iam not sure when our first pull is going to be. I started a new job and I am so busy through the rest of teh summer so I wont get to pull till they fall which is during deer season. We need more early spring pulls. Feb March and April, tell that to the south texas bunch next time you see them or talk to them. I will keep you updated, ryan

[Log in to Reply]  [No Email]
[Show Entire Topic]     [Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy