TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Any IMT owners?

Welcome Guest, Log in or Register

Author

Paul in STL

04-16-2000 10:40:19

Report to Moderator

Bought a IMT last fall and I am looking to see if there are any others on this forum that own one of these tractors. Drop me a note, would love to hear from others who have an IMT. Maybe we can share some resources. I am new and understand that some of the parts can be got from M.F. dealers.

[Log in to Reply] [No Email]

DON

04-08-2001 16:54:52

Report to Moderator

Re: Any IMT owners? in reply to Paul in STL, 04-16-2000 10:40:19

I BOUGHT A IMT 539 15 YEARS AGO AND IT STILL
RUNS LIKE A NEW ONE. ALL FILTERS WATER PUMP, AND
OTHER PARTS SEEM TO BE MASSEY REPLACEMENTS.

WORKS LIKE A GOOD MULE!
DH

[Log in to Reply] [No Email]

Robert Harvey

12-03-2000 17:47:20

Report to Moderator

Re: Any IMT owners? in reply to Paul in STL, 04-16-2000 10:40:19

I don't own a imt but I am trying to fix 264 compact imt tractor for someone I need clutch parts do you know where I might find them.
thank you .

[Log in to Reply] [No Email]

Mike

04-18-2000 18:07:45

Report to Moderator

Re: Any IMT owners? in reply to Paul in STL, 04-16-2000 10:40:19

"Robinson and Grissom" in Guntown, MS was the IMT distributor. They are now the Tafe distributor. So far, I've been able to get any IMT part I've needed from them. I'm also a tractor dealer and yes, many Massey parts do fit them because IMT built tractors for Ma

[Log in to Reply] [No Email]

Paul in STL

04-18-2000 23:44:41

Report to Moderator

Re: Re: Any IMT owners? in reply to Mike, 04-18-2000 18:07:45

Hi Mike and Geo, yes I am familiar with R & G in Guntown Miss. I ordered this past winter an manual for the 542 Deluxe. What I needed at the time was a electrical drawing of the tractor. All the manual had was the starter and alternator, no other electrical drawings. But I will need the adjustments and other mechanical drawings that came with this book, some time in the future. Thanks for the tip though. I messed up the seperator drain on the first fuel filter and might end up having to buy the bottom part of that filter unit. I was told later by a fellow that the darn thing is left hand thread, boy I feel stupid. I stop just in time to see the darn thing about to shear off.

Anyway, do I presume that you two fellows have a IMT then?

Thanks for the replies. I am going to put you two in the address book for future help. See I am a electrician by trade and some times mechanical things throw me a loop to understand.

Thanks again.

Paul in STL

[Log in to Reply] [No Email]

GEO

04-19-2000 14:23:10

Report to Moderator

Re: Re: Re: Any IMT owners? in reply to Paul in STL, 04-18-2000 23:44:41

I used to sell IMT a few years ago, just before the country that made them blew up. Since you have a 542, don't put a loader on this model unless you build a sub frame between the front end and the bell housing. The problem with the 542 is that if a loader is mounted in the coventional manner, all the stress is on the oil pan. Which can't take alot of abuse. Rough terrain ect.

[Log in to Reply] [No Email]

jerry crow

11-29-2000 14:20:13

Report to Moderator

Re: Re: Re: Re: Any IMT owners? in reply to GEO, 04-19-2000 14:23:10

we are a small tractor and equipment dealer in north georgia we have a 560 deluxe imt, could use some information on the brake system, also this tractor is for sale if any one needs it runns great very good rubber, anyone has information please let me know.

thanks jerry crow

[Log in to Reply] [No Email]

Paul in STL

04-22-2000 18:35:54

Report to Moderator

Re: Re: Re: Re: Any IMT owners? in reply to GEO, 04-19-2000 14:23:10

Geo, sounds like you know some stuff about these IMT tractors. I am playing with the idea about putting some kind of finish mower on this unit. I have a lot of open ground and would like to get it in some shape. Dont expect to get it to look like some suburban subdivision lawn, but something nice in a country way. Would you suggest a belly mower or a pull behind? Would you give a example/model of the type you suggest. I have been leaning towards a pull behind model, but have no experience with either. Thanks P.S. if belly, what kind of extra hardware will I need. If the following sound like some stupid questions. Please keep in mind I am a stupid city boy that just got sick and tired of the suburban life style. again thanks

[Log in to Reply] [No Email]

GEO

04-29-2000 17:16:27

Report to Moderator

Re: Re: Re: Re: Re: Any IMT owners? in reply to Paul in STL, 04-22-2000 18:35:54

I would go with the rearmount mower if your land is reasonbly flat, a 6 footer. I would invest in a spray rig also, to help control weeds.

[Log in to Reply] [No Email]

Paul in STL

04-30-2000 21:37:44

Report to Moderator

Re: Re: Re: Re: Re: Re: Any IMT owners? in reply to GEO, 04-29-2000 17:16:27

Thanks Geo for your suggestion. Ya, I am thinking that a powered sprayer might come in handy. Darn tent worms are really bad around here. Darn things really chew up my few apple trees. I would use the power sprayer to spray all along the property and might even take it up and down the road, spraying anything that I can get to without going on others property. Might help cut down the tent worm population some in the area.

Again, thanks

Paul in STL

[Log in to Reply] [No Email]

Mike in IL

05-30-2000 11:12:02

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Any IMT owners? in reply to Paul in STL, 04-30-2000 21:37:44

Hi GEO & Paul
I have a IMT 542 Deluxe and have used it for many years. I have the spare parts maunal for it which shows the electrical schematics and parts configuations. Let me know if I can help.

[Log in to Reply] [No Email]

Larry Smith

07-04-2001 17:26:42

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Any IMT owners? in reply to Mike in IL, 05-30-2000 11:12:02

I am looking for an alternator for the IMT 542Deluxe. If anyone knows where to find one used or new close to Louisiana please let me know.

[Log in to Reply] [No Email]

jason

11-08-2001 00:29:45

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: Any IMT owners? in reply to Larry Smith, 07-04-2001 17:26:42

HI I own a 560 deluxe IMT tractor THAT NEEDS SOME REAR END PARTS THE WHEEL FELL OF IF ANY ONE COULD HELP PLEASE CONTACT ME

[Log in to Reply] [No Email]

clay

12-08-2001 20:28:16

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Any IMT owners? in reply to jason, 11-08-2001 00:29:45

hi clay here i have imt 560 i cant find parts for i need the little housing & gears that the pto comes out of on the rear end imight know where you can get rear end parts used.

[Log in to Reply] [No Email]

sandy

02-20-2002 18:37:58

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Any IMT owners? in reply to clay, 12-08-2001 20:28:16

hi i have a 560 deluxe 4x4 i need some front end
parts or need to find a dealer

[Log in to Reply] [No Email]

hughie

03-15-2002 15:09:32

Report to Moderator

Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Re: Any IMT owners? in reply to sandy, 02-20-2002 18:37:58

hi, sandy I saw where you were looking for a part for an IMT tractor. I am also looking for a power steering pump for a model 560 IMT tractor. Did you ever find a dealer or parts place? If so please let me know.

Thanks,

Hughie

[Log in to Reply] [No Email]

GEO

04-17-2000 19:37:51

Report to Moderator

Re: Any IMT owners? in reply to Paul in STL, 04-16-2000 10:40:19

Some parts can be purchased for MF dealer, depending on which IMT (imitation massey trator) you have. Might check with a outfit Grissom&? in Guntown, Miss.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy