TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Hanh-Eclipse

Welcome Guest, Log in or Register

Author

Tony

10-27-1999 09:40:42

Report to Moderator

Hello

I just purchased an old Hahn-Eclipse snow-blower and am trying to find out more information on it. I am unable to find any reference to the manufacturer anywhere.

The engine is a Tecumseh 6hp dated circa 1978.

Does the company exist in any shape anymore (i.e bought out?)

Any helpful pointers would be greatly appreciated.
Tony W.

[Log in to Reply] [No Email]

FJC

12-21-2006 08:16:38

Report to Moderator

Re: Hanh-Eclipse in reply to Tony, 10-27-1999 09:40:42

I was just given a Hahn-Eclipse snow blower, series 7532 model UH-586-8 with an 8 hp Tecumseh engine. I"d really like to get my hands on an owner"s manual and parts list, any info at all. If you can help, email me directly: sun49dog@excite.com

Good luck, all.

[Log in to Reply] [No Email]

Renee

12-04-2006 18:46:48

Report to Moderator

Re: Hanh-Eclipse in reply to Tony, 10-27-1999 09:40:42

Hello,
Just picked up a Hahn-Eclipse. Found a website with obsolete parts. Check it out. Mayberry Sales & Service.

[Log in to Reply] [No Email]

Mike Piela

12-16-2006 08:36:06

Report to Moderator

Re: Hanh-Eclipse in reply to Renee, 12-04-2006 18:46:48

Renee,

I have a Hahn Eclipse Snow Blower Series 7523, Model CHD 584-7, S/N 0625986. Based on this info I am trying to figure out the manufacture date. Any ideas?

[Log in to Reply] [No Email]

Ward Boote

12-29-2004 18:48:31

Report to Moderator

Re: Hanh-Eclipse in reply to Tony, 10-27-1999 09:40:42

Hi Tony: Another participant, Jeff, need a manual. I have the operator's and parts manual for model #584-6 which is powered by a 6 HP Tecumseh. If you have a model 584, I would also be happy to photocopy my book and mail it to you. If I have the manual you need, please e mail your mailing address to me at: boote@mail.com
If your machine is a 584 and powered by a Tecumseh, would you be kind enough to look at the engine and see if the model number can still be seen. While I have the above described manuals, I do not have the separate engine book. My manual indicates that PH 584-6 is powered by a 6 HP Tecumseh. Thank you.
Ward Boote
PS: The drive belt for the 584 is Dayco "Top Cog" #15335

[Log in to Reply] [No Email]

Mike Piela

12-10-2006 06:34:48

Report to Moderator

Re: Hanh-Eclipse in reply to Ward Boote, 12-29-2004 18:48:31

Hello Ward. I am about to inherit a Hahn-Eclipse Snow Giant and I understand you may have a parts and operators manual available for a PH 584-6. The machine I am getting is a Series 7523, Model CHD 584-7, S/N 0625986. Do you think the manuals you have will cover the machine I am getting? Please let me know. If so, I would greatly appreciate a photocopy - especially the parts manual. If you e-mail me your address I'll send you a couple of bucks to cover postage, paper, etc plus my address. My e-mail is mwpiela@aol.com. Thanks in advance for your help.

Mike P.

[Log in to Reply] [No Email]

Jack Burke

12-19-2005 18:01:51

Report to Moderator

Re: Hanh-Eclipse in reply to Ward Boote, 12-29-2004 18:48:31

I just inherited a Hahn model 584-6 with a broken chain. I am looking for the manuals.
Any one still have a manual that I can get a copy of?

[Log in to Reply] [No Email]

brian menard

01-23-2006 09:02:17

Report to Moderator

Re: Hanh-Eclipse in reply to Jack Burke, 12-19-2005 18:01:51

I also have a Hahn model 584-6 and am looking for parts!!! I have a broken bracket that holds the pressure plate assy together... If anyone can help me get parts or even a broken hahn eclpise snowblower for parts.... That would be great!!

[Log in to Reply] [No Email]

Bruce

10-28-1999 04:08:00

Report to Moderator

Re: Hanh-Eclipse in reply to Tony, 10-27-1999 09:40:42

Your Hahn-Eclipse snowblower is probably painted yellow with a white engine. It was manufactured in Evansville, Indiana by the Hahn-Eclipse company. Their snowblowers were sold under the model name "Snow Giant". === The Hahn company bought out the old Eclipse Mower Company, and manufactured under the Hahn-Eclipse brand. Later, they just used the Hahn name. === Hahn sold to the Gravely company (late 70's I think). Gravely manufactured Hahn mowers for a few years, then let the line die out. === Some parts are still floating around at old dealers, but Hahn parts were discontinued by Gravely many years ago.

[Log in to Reply] [No Email]

Perry V. McGreck

03-08-2004 08:15:31

Report to Moderator

Re: Re: Hanh-Eclipse in reply to Bruce, 10-28-1999 04:08:00

email address is bpmcgreck2004@charter.net for part for the Hahn eclipse series 7547 Model AH-826 Serial 1322 391.

Need parts email or call 715-241-6655

[Log in to Reply] [No Email]

bondanza

10-05-2004 12:03:42

Report to Moderator

Re: Re: Re: Hanh-Eclipse in reply to Perry V. McGreck, 03-08-2004 08:15:31

I am looking for a throttle cable for a Hahn Eclipse Model 584. Any ideas?

Thanks
Bernie

[Log in to Reply] [No Email]

Perry V. McGreck

03-08-2004 08:11:37

Report to Moderator

Re: Re: Hanh-Eclipse in reply to Bruce, 10-28-1999 04:08:00

Hahn-Eclipse Series 7547 Model AH-826 Serial 1322 391... Looking for Parts, I've got them, please contact via email or phone 715-241-6655

[Log in to Reply] [No Email]

Perry V McGreck

03-08-2004 08:01:12

Report to Moderator

Re: Re: Hanh-Eclipse in reply to Bruce, 10-28-1999 04:08:00

looking for parts listing, specifically for the gears(Sprocket), the one that drives the wheels. any help would be useful

[Log in to Reply] [No Email]

Roger Casey

12-30-2000 11:46:28

Report to Moderator

Re: Re: Hanh-Eclipse in reply to Bruce, 10-28-1999 04:08:00

I have an old Snow Giant snowblower. I'm looking for dealers or private individuals that would still sell parts. If anyone can help it would really be appreciated. Hate to get rid of it because it was my grandfather's snowblower.

[Log in to Reply] [No Email]

Don

12-08-2002 10:56:27

Report to Moderator

Re: Re: Re: Hanh-Eclipse in reply to Roger Casey, 12-30-2000 11:46:28

Join the club. I am also looking for Snow Giant parts.

[Log in to Reply] [No Email]

Joe Ricard

12-31-2000 08:14:27

Report to Moderator

Re: Re: Re: Hanh-Eclipse in reply to Roger Casey, 12-30-2000 11:46:28

I, too, have a Hahn Eclipse Snow Giant Model 586 which I hate to get rid of but it needs some work. I would like to find a person to talk to about my machine and how to fix it. It runs fine but probably needs new rings - does not throw that wet, heavy snow which we have had a lot of here in Michigan this year. Let's talk!

[Log in to Reply] [No Email]

Scott Williams

12-31-2000 18:30:26

Report to Moderator

Re: Re: Re: Re: Hanh-Eclipse in reply to Joe Ricard, 12-31-2000 08:14:27

I also run a Hahn-Eclipse " Snow Giant " up here in the NorthEast it gets a work out. Though it is next to impossible to get parts for the Blower itself, the Engine is a Briggs and they still have parts all over. Take the vin number to any Briggs dealer and they can hook you up. as for the rest of the Machine, its all about retro fitting new parts. My brother and I just got done retro fitting a set of heavy duty axle bearings on mine, and it works better than new, and there a heck of a lot stronger. Goodluck with your machine, and feel free to write with any questions, I cantry to help. WilliamsStyle@webtv.net

[Log in to Reply] [No Email]

Dale Mansfield

07-27-2002 18:23:15

Report to Moderator

Re: Re: Re: Re: Re: Hanh-Eclipse in reply to Scott Williams, 12-31-2000 18:30:26

I too have a Hahn Snow Giant in need of "retrofitting". Just today, I accidentally broke off the plastic "fan clutch hand lever".
I was warned not to do that by a small-engine mechanic when I first bought the thing. He told me noone carried them and matching up to a newer type would be difficult. Well, I've done it!!
Any thoughts on how to repair it?
Dale

[Log in to Reply] [No Email]

bwood52

06-25-2002 08:41:26

Report to Moderator

high performance Briggs in reply to Scott Williams, 12-31-2000 18:30:26

[Log in to Reply] [No Email]

Keith Pflieger

12-31-2000 10:25:41

Report to Moderator

Re: Re: Re: Re: Hanh-Eclipse in reply to Joe Ricard, 12-31-2000 08:14:27

If anyone finds a outlet for HAHN ECLIPSE parts please let me know. I have a model 584 and need the clutch which drives the sprocket to turn the first stage of the blower. When it gets wet it stops turning. I must say when working properly this thing realy blows snow!

Keith

[Log in to Reply] [No Email]

Joe Ricard

12-31-2000 08:18:46

Report to Moderator

Re: Re: Re: Re: Hanh-Eclipse in reply to Joe Ricard, 12-31-2000 08:14:27

My e-address is ricardjj@svol.org to talk about Hahn Snowthrowers.

[Log in to Reply] [No Email]

Brian Hayward

12-04-2003 07:07:38

Report to Moderator

Re: Re: Re: Re: Re: Hanh-Eclipse in reply to Joe Ricard, 12-31-2000 08:18:46

Hi Joe:

I have a model IH-585-5 Snow Giant which is in need of replacement wheels/tires. I am guessing that original replacements are hard or near impossible to come by. I have considered replacing the wheels with pneumatic tires and new rims but I wanted to make sure that original replacements are not available. Any help you can offer is appreciated.

Regards,

Brian Hayward

[Log in to Reply] [No Email]

Jess

11-30-2004 05:51:49

Report to Moderator

Re: Re: Re: Re: Re: Re: Hanh-Eclipse in reply to Brian Hayward, 12-04-2003 07:07:38

I need a manual or a copy of a manual for a Hahn eclipse model 584-6. Also would like to know if there is a easy way to change the belts.

[Log in to Reply] [No Email]

Ward Boote

12-29-2004 21:22:50

Report to Moderator

Re: Re: Re: Re: Re: Re: Hanh-Eclipse in reply to Jess, 11-30-2004 05:51:49

Jess: I replied to you once, can't see that it got posted. I have the operator's and parts manual for Model PH 584-6, this is the complete model number per my book. (This carries a 6 HP Tecumseh) I do not have the separate engine book.
I would be happy to photocopy the manual for you, please send a mailing address to: boote@mail.com
Another participant, Tony, may be looking for the same manual. (assuming he still has the machine)
The belt is Dayco "Top Cog" # 15335.
Now peraps you can do me a favor: If your machine has a 6 HP Tecumseh, could you see if the engine ID label is still attached and let me have the model number of the engine. Thank you.
Ward

[Log in to Reply] [No Email]

GreyBeard

11-29-2006 11:50:17

Report to Moderator

Re: Re: Re: Re: Re: Re: Hanh-Eclipse in reply to Ward Boote, 12-29-2004 21:22:50

I recently became the proud owner of a Hahn Snow Giant Series 7546, Model AH-724. Any information regarding this machine would be greatly appreciated.

Thanks in advance,

[Log in to Reply] [No Email]

Captain-Q

02-15-2007 17:57:33

Report to Moderator

Re:Hanh-Eclipse in reply to GreyBeard, 11-29-2006 11:50:17

I have owned a Hahn Eclipse Series 7524 Model CH588-7 since the early 1980's. I have the original manual and parts breakdown if anyone needs a copy. I just don't know where to get parts. I replaced the entire block in the mid 1990's and she runs like a champ - but the friction plate no longer turns the transmission. Anyone know how to solve this problem?

[Log in to Reply] [No Email]

Ward Boote

04-15-2007 21:31:01

Report to Moderator

Re:Hanh-Eclipse in reply to Captain-Q, 02-15-2007 17:57:33

Capt. Q: My best guess is that the rubber on the edge of your friction wheel has seen its better days. The outer edge turns the friction plate and sets the machine into motion. While you will probably not be able to get another Hahn Eclipse rubber part, you might be able to get one made by another manufacturer that would work. You might want to try to disassemble the wheel, remove the rubber and take it to a shop to see if they have something similar. The outside diameter of the rubber part is generally about the same. (per what I read some time ago) My reply assumes that nothing is broken in your drive assembly.

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy