TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Discussion Forum

Honda HT3813 discussion

Welcome Guest, Log in or Register

Author

John B

03-03-2000 13:31:53

Report to Moderator

Does anyone know where I could find a discussion group on Honda riders? I just bought a HT3813 and would like to get some inside info on it. Pros & cons. The technology and engineering on this tractor is pretty impressive (2 cylinder, water cooled).

This isn't an old tractor, so it may not be appropriate on this forum.

It would be nice to talk to someone other than the local Honda dealer and parts guy.

Please steer me in the right direction.

Thanks.

[Log in to Reply] [No Email]

jim

09-16-2003 22:05:16

Report to Moderator

Re: Honda HT3813 discussion in reply to John B, 03-03-2000 13:31:53

I have a1987 Honda HT3813 lawn tractors It still runs good has 156 pounds preasure per cyinter, transmission in ex shape ,drive clutch very good ,rear ex, tires in good shape . Needs PTO clutch ; clutch brake, would sell parts off it . If any one needs some. E Mail me

[Log in to Reply] [No Email]

carbazole

05-19-2006 17:10:42

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to jim, 09-16-2003 22:05:16

I"ve got a HT4213 (pretty much a 3813 with a larger deck)) and need an old carb to cannabilize some small parts off of.

Thank

[Log in to Reply] [No Email]

Ryan Westfall

06-05-2006 08:57:30

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to carbazole, 05-19-2006 17:10:42

I'm Looking for a bagging system for my Honda HT3813, the part I really need bolts on to the back that you connect the bagging system to.

Thanks for you help

[Log in to Reply] [No Email]

Kevin C Dalton

06-27-2006 20:02:47

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to Ryan Westfall, 06-05-2006 08:57:30

Let me know if you want to sell the clutch assembly and some linkage

[Log in to Reply] [No Email]

david a p

03-31-2006 19:54:11

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to jim, 09-16-2003 22:05:16

have HT3813
need starter
is the engine easy to pull?
where to get reasonable priced starter?

I may sell it plus an extra engine.

[Log in to Reply] [No Email]

Tom Moncus

02-03-2006 15:25:36

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to jim, 09-16-2003 22:05:16

I am looking for a throwout bearing for the drive clutch.Do you have one or know of anyone willing to sell used or new?
Thanks
Tom

[Log in to Reply] [No Email]

peter d

12-07-2005 21:01:04

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to jim, 09-16-2003 22:05:16

I have a ht3813 that I bought used not running -anyway I need a flywheel,coil bracket,water pump drive sprocket and the driveshaft coupler that attaches to the back of the engine and slides into the shaft.A grass catcher setup would be great too. I also may need other parts once I am able to get it together. please let me know if you have any of these parts and the condition/price

[Log in to Reply] [No Email]

Kevin C Dalton

06-27-2006 20:06:15

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to peter d, 12-07-2005 21:01:04

I Have a honda dual bagger assemble for the HT3813 for sale

[Log in to Reply] [No Email]

craig vento

08-08-2005 16:33:33

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to jim, 09-16-2003 22:05:16

I inherited a Honda HT3813
preety good condition, everything works well.
leaks a little oil.
lookin to pick up a new tractor, sell this one.
let me know if there's any takers.
i have no idea what a fair price would be.
near milwaukee wisc.
-Craig

[Log in to Reply] [No Email]

Kevin C Dalton

06-27-2006 20:08:05

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to craig vento, 08-08-2005 16:33:33

I may be interested in it. I live in Gurnee, IL

[Log in to Reply] [No Email]

ShaunB

03-03-2005 15:41:00

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to jim, 09-16-2003 22:05:16

I need a deck for a honda ht3813. Please let me know if anyone has one. smbjcm@netzero.com Im in Michigan.

[Log in to Reply] [No Email]

Stefan

11-10-2003 09:58:56

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to jim, 09-16-2003 22:05:16

I need a cooling fan for my HT3813. Perhaps a radiator. Would you sell to me in Ontario?

Stefan

[Log in to Reply] [No Email]

Ernest

06-02-2004 06:10:11

Report to Moderator

Re: Re: Re: Honda HT3813 discussion in reply to Stefan, 11-10-2003 09:58:56

I'm looking for a Control relay for the 3813 Honda. If you have one, how much are you asking?

Ernest

[Log in to Reply] [No Email]

Yahnke

10-15-2004 19:37:45

Report to Moderator

Re: Re: Re: Re: Honda HT3813 discussion in reply to Ernest, 06-02-2004 06:10:11

Require a starter, do you have one?

[Log in to Reply] [No Email]

Ralph Fraser

06-13-2002 07:22:29

Report to Moderator

Re: Honda HT3813 discussion in reply to John B, 03-03-2000 13:31:53

My friend's HT3813 has done something really scary for about the last 5 years. Twice or three times a cutting season he will be working the machine, cutting under load, and the thing will take right off and hit the rev stratosphere. Even if he backs off on the throttle, it still revs off the map. You have to do a real emergency shutdown. Not good. Linkage has been checked, carb, throttle etc. He's had it to the Honda shop where they apparently replaced the governor and it still does it. Help!!! This is a real safety issue never mind a potential mechanical disastor in the making. What could be wrong inside that governor unit?????

[Log in to Reply] [No Email]

Glenn(WV)

06-14-2002 08:27:15

Report to Moderator

Re: Have a Cub Cadet 682, Need a Mower Deck in reply to R. B. Conley, 06-14-2002 08:09:50

Go to ihcubcadet.com and peruse their classified ads. A number of people who part out Cubs list their parts on that site, and one of them can help you out. If you don't see it listed, just contact one of the people parting the Cubs out(e-mail is included with the ad). Punch this link, then scroll down to "IH Cub Cadet Classifieds."

classified ads on IHcubcadet.com

[Log in to Reply] [No Email]

Carl Nau

02-02-2001 11:02:58

Report to Moderator

Re: Honda HT3813 discussion in reply to John B, 03-03-2000 13:31:53

Hi, own an HT4213 and wanted to know how to check drive clutch and check/change trans oil. What type trans oil? The manual does not address any of this. Where can u buy a overhaul manual for the Ht4213???
Thanks,
Carl

[Log in to Reply] [No Email]

Roger

03-26-2000 20:59:40

Report to Moderator

Re: Honda HT3813 discussion in reply to John B, 03-03-2000 13:31:53

Bought my HT3813 summer 1986. I lived in a rural area then, mowed 25000 ft2 of lawn, and a 2 acre orchard.

Now in city w/ just 10000 ft2 lawn.

It has cut a lot of grass. Your post was the only hit I got on searching for HT3813. I am looking for a discount place for parts (need to replace grass bags after 14 years).

Just got it out of storage today, gave it fresh gas, let it run for a while. At full throttle, it is the smoothest lawn tractor engine sound you will ever hear.

Problems:

1) after all this time, the evenness of the cut isn't perfect,
2) had to replace cam, some years ago, maybe 10 years, apparently a known problem,
3) the oil pump gear is nylon, so have been advised never to start with engine really cold.

Great machine. Cost me $3000 new. Gotta say, I've received good value, though.

Good luck.

Roger

[Log in to Reply] [No Email]

Jim

09-16-2003 22:19:30

Report to Moderator

Re: Re: Honda HT3813 discussion in reply to Roger, 03-26-2000 20:59:40

Have ht3813 tractors &repair man. Tractors runs very well ,needs Pto clutch. would like to sell parts off of it if some needs them E Mail me bost528@aol.com

[Log in to Reply] [No Email]

Stephen Rawlins

06-21-2004 22:23:42

Report to Moderator

Re: Re: Re: Honda HT3813 discussion in reply to Jim, 09-16-2003 22:19:30

I'd be interested in a starter motor

[Log in to Reply] [No Email]

ff316

03-13-2002 19:37:25

Report to Moderator

Re: Re: Sears Custom 7 throttle/choke cable in reply to lucas, 03-13-2002 18:15:19

Thanks Lucas, is this spring something I can rig up, or do I need to try to find one? Would you now where I can find a picture of the linkage? Thanks again, Fireman

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy