Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Fordson Tractors Discussion Forum

Fordson Major head bolt torque

Welcome Guest, Log in or Register
Author 
Alf Cousins

09-17-2004 23:25:28




Report to Moderator

I'm decarbonising a 1954 Fordson Major, petrol engine, I only have the users handbook and it gives the tightening sequence but not the torque for the head bolts. Can any one advise?
Also, I've had to botch up the inlet/exhaust combined manifold casting as I have been unable to source a replacement here in Australia. Any one know of a good source of supply.
This is still very much my daily use tractor and she brings in the crops every season! regards
Alf

[Log in to Reply]   [No Email]
Miles

09-22-2004 19:42:52




Report to Moderator
 Re: Fordson Major head bolt torque in reply to Alf Cousins, 09-17-2004 23:25:28  
85-90 Ft-Lbs. for head bolts



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy