Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Discussion Forum
:

Valve job specs for C-113 engine

Welcome Guest, Log in or Register
Author 
Tom Fleming

12-18-2007 03:12:29




Report to Moderator

I am ready to start work on my BN. I would like to know either a good source, or the info for the valve grind specs, and guide specs. I am doing the work myself, and have not been able to locate this info.

This is my first IHC rebuild, and done quite a few V-8s, and wanted to know valve grind angle, grind width, valve guide ream specs, etc.

Any feedback is appreciated.

take care,

Tom

[Log in to Reply]   [No Email]
Tom Fleming

12-18-2007 16:28:40




Report to Moderator
 Re: Valve job specs for C-113 engine in reply to Tom Fleming, 12-18-2007 03:12:29  
Thanks guys, this is good info, and what I was looking for.



[Log in to Reply]  [No Email]
ShaggyM

12-18-2007 07:00:09




Report to Moderator
 Re: Valve job specs for C-113 engine in reply to Tom Fleming, 12-18-2007 03:12:29  
The seat angle is 45 and going by the Blue ribbon service manual the valve angle is 45 1/2. The guides inside diameter in .343-.344.. You can get new Valves and guides for a pretty decent price. Check out the engine kits on this site.
Shaggy



[Log in to Reply]  [No Email]
K-Mo

12-18-2007 04:34:53




Report to Moderator
 Re: Valve job specs for C-113 engine in reply to Tom Fleming, 12-18-2007 03:12:29  
Get Service Manual GSS5031. It covers the complete tractor and engine. www.binderbooks.com is a good source for quality reprints.

K-Mo



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy