TRACTOR PARTS Allis Chalmers Case & David Brown Farmall & International Ferguson Ford & New Holland John Deere Massey Ferguson Massey Harris Minneapolis Moline Oliver & Cockshutt Kubota / Yanmar

TRACTOR MANUALS

Allis Chalmers	Case	Farmall IH	Ford 8N,9N,2N	Ford
Ferguson	John Deere	Massey Ferguson	Minn. Moline	Oliver

Farmall & IHC Tractors Discussion Forum

F-20 brake levers 1 or 2

Welcome Guest, Log in or Register

Author

Scott Rukke

12-13-2007 21:35:43

Report to Moderator

The 38 I bought for $300 and am restoring has brake levers on the left and right sides. The one on the right has a handle that's a bit longer than the left but the locking mechan ism and arms, spring etc. is the same.
Did the F-20's normally have 2 brake levers? I have heard they didn't and that it was a very rare option.

[Log in to Reply] [No Email]

Andy Motteberg

12-14-2007 15:15:17

Report to Moderator

Re: F-20 brake levers 1 or 2 in reply to Scott Rukke, 12-13-2007 21:35:43

If your lever on the right side is shorter, but looks factory, it is a rare right brake lever option. IH made the tractors with only a left lever, but the right lever was a option. They are very rare and are worth a lot of money. My Dad sold two on eBay before, the first one sold for $145.10 and the other one went for $100.00.

[Log in to Reply] [No Email]

Scott Rukke

12-14-2007 16:12:06

Report to Moderator

Re: F-20 brake levers 1 or 2 in reply to Andy Motteberg, 12-14-2007 15:15:17

No wonder the brake lever was shorter. It was broke off, had a piece of 1" pipe around it and the handle off something else attached to it. The picture shows it without the piece of pipe. Looks like it was factory at one time???

[Log in to Reply] [No Email]

Nebraska Cowman

12-14-2007 06:11:25

Report to Moderator

Re: F-20 brake levers 1 or 2 in reply to Scott Rukke, 12-13-2007 21:35:43

True factory right-hand levers are rare. But farmer add-ons are very common.

[Log in to Reply] [No Email]

Scott Rukke

12-14-2007 07:08:57

Report to Moderator

Re: F-20 brake levers 1 or 2 in reply to Nebraska Cowman, 12-14-2007 06:11:25

Any idea if the factory right option looks exactly like the left, length etc.

[Log in to Reply] [No Email]

Larry Condon

12-14-2007 06:02:06

Report to Moderator

Re: F-20 brake levers 1 or 2 in reply to Scott Rukke, 12-13-2007 21:35:43

My 1937 F20 has two brake levers and the left side is longer than the right side.

[Log in to Reply] [No Email]

RAW in IA

12-14-2007 02:23:43

Report to Moderator

Re: F-20 brake levers 1 or 2 in reply to Scott Rukke, 12-13-2007 21:35:43

My son has a 37 that Grandp[a bought new, and it has two levers. I too have been told it was an option or an add-on and they came standard with just one.

[Log in to Reply] [No Email]

12-13-2007 23:19:07

Report to Moderator

Re: F-20 brake levers 1 or 2 in reply to Scott Rukke, 12-13-2007 21:35:43

Mine has left lever only. Parts/operators manuals from Rice Equipment seem to indicate option, don't know how rare. RN

[Log in to Reply] [No Email]

[Options] [Printer Friendly] [Posting Help] [Return to Forum] [Log in to Reply]

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home | Forums

Copyright © 1997-2023 Yesterday's Tractor Co.
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy