Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

Clutch Question on 200?

Welcome Guest, Log in or Register
Author 
Joe VA

06-11-2004 07:43:57




Report to Moderator

I have a question on putting back the clutch on a Farmall 200. What is the adj for the three clutch release levers. It's a Rockford unit. I have missplaced my book. Thanks for your time.




[Log in to Reply]   [No Email]
Hugh MacKay

06-12-2004 20:19:09




Report to Moderator
 Re: Clutch Question on 200? in reply to Joe VA, 06-11-2004 07:43:57  
Joe: Is this what you are looking for? Distance from release lever face to friction face of presure plate; serial number 501 to 2289 distance is 2-3/8" and after serial 2289 2-23/64". If that is not what you are looking for come back. I have an IT manual here.



[Log in to Reply]  [No Email]
Joe VA

06-14-2004 06:03:30




Report to Moderator
 Re: Re: Clutch Question on 200? in reply to Hugh MacKay, 06-12-2004 20:19:09  
Thank You Hugh, that is what I needed. I don't post very often but do enjoy your notes. Thanks for taking the time. I'm restoring my wife's grandfather's 200 for her. Joe



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy