Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
Order Farmall Cub Parts Online

Cub Block-Valve Seats?

Welcome Guest, Log in or Register
Author 
Red Tom

02-04-2004 16:25:36




Report to Moderator

I'm rebuilding a cub engine and weather rusted the seats. Evidently there are no inserts in the valve seats on a cub? What should I expect to pay to have them installed from scratch? I think I only need the exhaust but should do all with Stellite?




[Log in to Reply]   [No Email]
Ivan

02-04-2004 19:43:10




Report to Moderator
 Re: Cub Block-Valve Seats? in reply to Red Tom, 02-04-2004 16:25:36  
I own a machine shop and charge $12.50 per seat to cut and install and grind the seats. Stellite wouldn't be necessary unless you are on LPG. Powderd Metal seats are very cost effective at about $2.00 per seat and they will stand up to a lot of abuse.
Ivan



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy