Welcome! Please use the navigational links to explore our website.
PartsASAP LogoCompany Logo Auction Link (800) 853-2651

Shop Now

   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Farmall & IHC Tractors Discussion Forum
:

TractorVet

Welcome Guest, Log in or Register
Author 
JTinNJ

04-18-2007 16:05:46




Report to Moderator

I could not get to the hydraulic control valve untill today. Your advice was right on the money. I did go to the local CaseIH dealer and asked for a parts list with a drawing.That also was a big help. When I pulled the valve out I found the dedent balls full of rust. A good cleaning with some WD-40 was in order. All I need now is a new rolled pin for the front of the piston.That connects the lever from the right side of the seat to the piston. The old one came out in 2 peaces. So, Thanks for your help. Janet Theresa.

[Log in to Reply]   [No Email]
the tractor vet

04-18-2007 16:54:36




Report to Moderator
 Re: TractorVet in reply to JTinNJ, 04-18-2007 16:05:46  
every once in a while i get it wright . Anytime i can help ya out just give a shout .



[Log in to Reply]  [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:


TRACTOR PARTS TRACTOR MANUALS
We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums


Copyright © 1997-2023 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy