FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 31 Parts

Category: Steering

[Categories] [All MF31 Parts] [All Massey Ferguson Models]

Axle Rear Center Pivot Bushing - 1.875 inch x 2.125 inch x 2.500 inch. For tractor models 165, 175, 245, 265, 275, 285, 30, 31, 3165. (Item #: 128540, Ref: 512980M1) $17.60

Bushing, Front Center Pivot - 1.875 inch x 2.062 inch x 1.125 inch. For tractor models 165, 174, 245, 255, 265, 275, 285, 30, 31, 3165. (Item #: 128539, Ref: 512979M1) $28.30

Differential Ring Gear Case Assembly - For Massey Ferguson tractor models 30, 31, 40, 50, 50A, 65, 135, 150, 175, 180, 205, 220, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 375, 390, 390T, 399, 670, 690, 698, 699, 1085, Replaces Massey Ferguson OEM number 882783M92, (Item #: 165984) $175.00

Front Axle Assembly with Pivot Bushing - For tractor models 165, 175, 255, 265, 275, 3165, 30, 31. (Item #: 167284, Ref: 512982M92) $461.00

Front Axle Support - 18-5/8 inches long, machined bottom surface. For tractor models (165 with M93 Arms), (165 with 203 engine needs adaptor block S.61771. Available separately), (175 serial number 644002123 to 9A105660), (255 serial number 9A246493 to 9A324146), (265 up to serial number 9A324139), (275 up to serial number 9A324137), (285 up to serial number 9A281393), (Ind. 30 gas), 31. Replaces 532741M93. Measure old casting before ordering. Arms shown to differentiate between the 2 types. *** Weight is approximately 210 pounds ***. Replaces 512046M94 532741M93 (Item #: 182676, Ref: 512046M94) $764.00

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Jam Nut - For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 150, 165, 168, 175, 185, 188, 245, 255, 265, 275, 285, 290, 30, 31, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105123, Ref: 192928M1) $8.40

Main Steering Arm - 43 spline. Spline Major Diameter: 1.850 inch, Minor Diameter: 1.770 inch. For 165, 175, 30, 31, 3165. Main Steering Arm. Replaces 534155M91 or 514281M91. Used with 523112M91 Center Steering Arm. (Item #: 102532, Ref: 534155M91) $71.00

Power Steering Cylinder Shaft and Piston - This Power Steering Cylinder Shaft and Piston is used on 165, 175, 3165, 30, 31. It replaces 1027231M91. Uses 9N675 rings, not included. (Item #: 179587, Ref: 1027231M91) $182.00

Power Steering Pump - Helical cut gear, 14 teeth, replaces Parker Hannifin. For tractors: 165 Perkins gas, 175, MF255 diesel, MF265 except with Hydrostatic Power Steering Pump, MF275; Industrials 30 gas, 31, 50C, 50D, 6500 Forklift. Replaces 505341M91, 518637M92, 523092M1 and 897146M94. (Item #: 112581, Ref: 523092M91) $245.00

Power Steering Seal Kit - For Parker Hannifin Model reference number D17X-01. Without rear plate. Repairs 523089M91, 523090M91, 523091M91, 523092M91 and 523093M91 Power Steering Pumps. Replaces PHPSKIT, PHPS-KIT, 1201-1621 for tractor models MF1080, MF1085, MF165, MF175, MF175, MF255, MF265, MF275, MF285, MF30, MF302, MF304, MF31, MF3165, MF40B, MF50, MF50A, MF50C, MF50D and MF65. (Item #: 113671, Ref: PSP-KIT2) $32.90

$Massey Ferguson 31 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For Massey Ferguson tractor models 30, 31, Compatible with Massey Ferguson Construction and industrial models 3165, Replaces Massey Ferguson OEM number 514572M92, Dimension A: 9.375", Dimension B: 1.500", Dimension C: 1.796", Dimension D: 1.250", Right or Left Side, (Item #: 104984) $225.00

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Steering Arm - Right Hand, Used - For Massey Ferguson tractor models 30, 31, 165, 175, 255, 265, 285, Compatible with Massey Ferguson Construction and industrial models 3165, Replaces Massey Ferguson OEM number 194569M1, Right Hand, For a new version of this item use Item #: 102528, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446999) $19.51

Steering Arm, Center - 43 splines, 11.187 inch long shaft, 1.686 inch and 1.873 inch diameter. For tractor models 165, 175, 30, 31, 3165. (Item #: 102530, Ref: 523112M91) $375.00

Steering Arm, LH - For tractor models 165, 175, 255, 265, 285, 30, 31, 3165. (Item #: 102529, Ref: 194570M1) $38.80

Steering Arm, RH - For tractor models 165, 175, 255, 265, 285, 30, 31, 3165. (Item #: 102528, Ref: 194569M1) $37.10

Steering Arm, Upper - This Upper Steering Arm is for tractor models 165, 175, 30, 31, 3165 all with 523112M91 center steering shaft. The large hole is 1.687 inches, small hole is .312 inches. Tapered tie rod hole is .656 to .775 inches. (Item #: 102531, Ref: 514285M1) $107.00

Steering Arm, Used - For Massey Ferguson tractor models 30, 31, 165, 175, Compatible with Massey Ferguson Construction and industrial models 3165, Replaces Massey Ferguson OEM number 514285M1, Use with 523112M91 Steering Shaft, For a new version of this item use Item #: 102531, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447006) $62.01

Steering Shaft - For tractor models 165, 175, 30, 31, 3165. (Item #: 182832, Ref: 1026257M91) $92.00

Steering Shaft - For Massey Ferguson tractor models 30, 31, 135, 150, 165, 175 (All UK), 178, 230, 235, 240, 245 (s/n 9A349239 - earlier), 255, 265, 285, 2135, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 20, 40, 200, 3165, Compatible with Massey Ferguson Hay Cutting (s) 200, Replaces Massey Ferguson OEM number 899277M91, Steering Shaft, Draft Control, (Item #: 105176) $39.00

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to serial number 6585483), (575 up to serial number 270719), (590 up to serial number 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1. (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod Assembly - Right Hand - For Massey Ferguson tractor models 30, 31, 175, Compatible with Massey Ferguson Construction and industrial models 30, 3165, Replaces Massey Ferguson OEM number 507436M91, Dimension A: 23.125", Dimension B: 1.000", Fits Right Hand Side, (Item #: 105127) $152.00

Tie Rod Assembly, LH - For tractor models 165, 168, 175, 185, 188, 255, 265, 275, 285, 290, (30, 31 Industrials). (Item #: 105121, Ref: 553325) $77.00

Tie Rod Assembly, RH - For tractor models 165, 168, 175, 178, 255, 265, 275, 285, 290, (30, 31 Industrials). One end is notched, other end is welded. Replaces Massey Ferguson OEM nos 1028262M91, 1028264M91, 553326. (Item #: 102506, Ref: 553326) $57.00

Tie Rod End - Tie rod end, left hand, inner. 4.812 inches to center of post, 1 inch outside diameter, female. For adjustable front axle on tractors: MF165 except LP, MF175, MF255, MF265, MF275 Industrials: 30, 31, 3165 Turf. For 30, 3165, 31, MF165, MF175, MF255, MF265, MF275. Replaces 1028098M1, 1028098M91, 1028098M92. (Item #: 102511, Ref: 1028098M1) $20.30

Tie Rod End, Outer - Left Hand - For Massey Ferguson tractor models 30, 31, 175, Compatible with Massey Ferguson Construction and industrial models 30, 3165, Replaces Massey Ferguson OEM number 1028514M91, Fits Left Hand Side, Dimension A: 16.875", Dimension B: 4.750", 16 UN RH Thread, (Item #: 105126) $72.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All MF31 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy