FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 31 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Brakes

Actuator Rod Boot, Dry Brakes - For tractor models 65, 85, 88, Super 90, (135 Orchard malleable axle), 150, 154-4, (165, 180, 31, 40 malleable axle), (165 UK up to serial number 597745), 174-4, 175, 175 UK, 178, 184-4, 254-4, 274-4, 285, 294-4, 1080, 1085, 30, 50, 3165 Utility. (Item #: 105645, Ref: 183462M1) $6.40

Brake Actuating Spring - Used with disc brakes. For tractor models Super 90, 1001, 1080, 1085, 135 Orchard, 150, 154-4, 154S, 165, 165, 174S, 175, 180, 180, 194F, 203, 205, 2200, 2500, 254-4, 274-4, 294-4, 302, 303, 305, 3165, 356, 404, 406, 65, 85, 88, 95, 97, Industrial: 30, 31, 40, 50. Replaces: 1005510M1. Priced each. Measures 1.209 inches overall length, .761 inches outside diameter with a wire diameter of .105. (Item #: 113798, Ref: A155624) $1.70

Brake Actuator 7 Inch - This 7 Inch Brake Actuator is used on Massey Ferguson: 1080, 135, 140, 145, 150, 152, 155, 158, 165, 175, 178, 180, 30, 31, 3165, 50, 65, 765, 85, 88, 95, 97, 99, MF40, MF50, Super 90. Replaces 764805M92 (Item #: 105630, Ref: S.40829) $82.00

Brake Actuator - Wet Brake Systems - 9 inch. For tractor models 135, 165, 175, 180, (235 Orchard), 255, 265, 275, 285, 1080, 1085, 30, 31, 40. Replaces 1860963M91, 1860963M92. (Item #: 105629, Ref: 1860963M91) $68.00

Brake Disc - For tractor models 135, 150, 165, 175, 180, 203, 205, 2500, 30, 302, 304, 31, 3165, 356, 40, 50, 65, 85, 88, 90. Replaces 1753117M91. Brake Disc is 7.125 inches X 4.000 inches in diameter and has 27 splines. (Item #: 105627, Ref: 1021314M1) $21.50

Brake Disc - Brake Disc is 8 7/8 inch outside diameter and 6 inch inside diameter, 27 splines. For tractor models 1080, 135, 165, 175, 180, 235, 255, 265, 275, 285, 30, 31, 40. Replaces 1805980M1. (Item #: 105628, Ref: 1044526M1) $27.10

Brake Friction Disc - Brake Friction disc, used in wet disc brake system. OEM quality, appearance and performance. For tractors: MF245, MF250, MF255, MF265, MF275, MF285, MF1085 industrials: 11 wheel loader UK, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D, 60 backhoe/loader forklifts: 4500 (Item #: 105632, Ref: 1860964M2) $32.50

Brake Lever Bracket, Right Hand - Brake lever bracket replaces 1667224M1, 1860972M2. For tractor models 1085, 135, 165, 165 UK, 175, 180, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 263, 265, 271, 275, 275 UK, 281, 282, 283, 283 UK, 285, 290, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D. Different suppliers have different parts for the same part number. VERIFY PICTURE LOOKS LIKE YOUR OLD PART. (Item #: 105643, Ref: 847705M2) $119.00

Brake Lever Return Spring - This Brake Lever Return Spring is use on multiple Massey Ferguson Tractors. It is 3 5/16 inches in length. It replaces original part numbers 533618M1, 517503M1, 184171M1, 1868691M1, 773222M1. (Item #: 124541, Ref: 773222M1) $6.80

Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $2.30

Intermediate Brake Disc - This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $16.00

Spring - Spring, actuator disc return for disc brakes on tractors, just over 1 inch long: MF154-4, MF184-4, MF235 orchard, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, to serial number V39466, MF375 to serial number V39466, MF383 to serial number V39466, MF390 to serial number V39466, MF398 to serial number V39466, MF399 to serial number V39466, MF670, MF690, MF698, MF699 Industrials: 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 50F Forklift: 4500, 6500. For the following tractors with cast iron axle: MF135, MF165, MF175, MF180 Industrials: 30, 31, 40, 50A. For 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 4500, 50A, 50C, 50D, 50E, 50F, 6500, MF135, MF154-4, MF165, MF175, MF180, MF184-4, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, and more. Replaces 1853148M1. (Item #: 124547, Ref: C5NN2N320A) $1.80

Clutch

Clutch Assembly, Dual 12 Spring - Uses 11 inch x 1-1/8 inch 10 spline main disc (NOT INCLUDED) and 9 inch x 1-5/8 inch, 25 spline captive PTO disc. For MF175 serial number 9A1308030>, MF255 late production with 254046 on cover casting, MF265. (Item #: 185159, Ref: 532321M91) $375.00

No
Picture
Clutch Kit, Remanufactured - For Massey Ferguson tractor models 30 (IND), 31 (IND), 165, 175, 235, 245, 255, 265, 285, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 20, 40, Clutch Diameter - 11", Clutch Hub Diameter - 1-1/8", Clutch Splines - 10, Clutch Center - Solid Offset, Clutch Type - Woven, Pressure Plate Size - 11", Pressure Plate Levers - 3, Pressure Plate Springs - 12, Pressure Plate Hub Diameter - 1-5/8", Pressure Plate Splines - 25, Additional Handling and Oversize Fees Apply To This Item, (Item #: 202056) $315.01

Clutch Pedal - For tractor models 150 SN# 642001771-9A44505, 165 SN# 643002327>, 175 SN# 644000350-9A44505, 30, 31, 3165 SN# 647000293>. (Item #: 173150, Ref: 510557M92) $116.00

Clutch Release Carrier Fork Locking Screw - This Clutch Release Carrier Fork Locking Screw is used to secure the release fork to the shaft on many Massey Ferguson models. Two used per tractor. Sold individually. It replaces Massey numbers: 881114M1, 881144M1, 881144M2, 3771408M1, 3790757M1, 180002M1 (Item #: 182943, Ref: 881144M1) $5.10

Clutch Transmission Disc11 Inch - This is an 11 inch rigid disc with a 10 spline, 1.125 inch hub. It is used in single clutch and split torque clutches. 165, 175, 180, 202 Indust/Const, 203 Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 2500 Forklift, 255, 265, 30 Indust/Const, 31, 3165 Indust/Const, 35, 40B Indust/Const, 4500 Forklift, 50C Indust/Const, 50D Indust/Const, 65 Replaces 189948M91, 513580M92 (Item #: 130134, Ref: 189948M91) $102.00

Dual Clutch Assembly, 12 Spring - Dual clutch uses 11 inch, 1-1/8 inch, 10 spline main disc (NOT INCLUDED) and 9 inch, 1-3/4 inch, 10 spline caprive PTO disc. For tractor models 175, 180, 31. Replaces 3620403M91, 506898M92, 512357M91, 526664M91, 526664V91, 881932M93, 886394M93. (Item #: 177044, Ref: 526664M91) $275.00

Pilot Bearing - Clutch pilot bearing, heavy-duty, long lasting stainless steel. Bore: 0.670 inches (17mm), OD: 1.57 inches (39.88mm), 0.470 inches width. For tractors: MF50, MF65, MF85, MF88, MF235, MF245, MF255, MF285, MF1080 industrials: 20, 20C, 30, 30B, 31, 35 utility and turf, 40, 40B, 50, 50A, 50C, 202, 203, 204, 205, 302, 304, 2135, 2200. Replaces 832953M3, 1440487X1, 828123M1, 828123M2, 832960M3 (Item #: 107933, Ref: C5NN7600A) $3.40

Pilot Bearing - This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 375, 382, 390, 390T, 398, 399, 40, 40B, 40D, 40E, MH44, 50, MH50, 500, 50A, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60H, 65, 670, 675, 690, 698, 698T, 699, 85, 88, F40, FE35, Super 90, TE20. Replaces OEM part number 828123M2. (Item #: 107933, Ref: C5NN7600A) $3.40

Release Bearing - Sealed Release Bearing for single and dual clutch, 2.50 inch inside diameter, 3.936 inch outside diameter. For tractor models 1080, 1085, 1100, 1130, 130, 133, 135, 140, 145, 148, 150, 152, 155, 157, 158, 165, 168, 175, 177, 178, 180, 185, 188, 20, 202, 203, 204, 205, 20B, 20C, 20D, 20E, 20F, 20H, 2135, 2165, 2200, 220, 230, 235, 240, 245, 250, 255, 260, 265, 270, 275, 282, 285, 290, 298, 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35. Replaces original part numbers 892862M2, 892862M1, 86534551 and 195508M1. (Item #: 112189, Ref: N1585) $23.20

Release Bearing - Used in single and dual clutches. For tractor models (FE35, 1080, 1085, 135, 135 UK, 150, 165, 165 UK, 175, 180, 20E, 235, 240, 245, 253, 255, 265, 270, 285, 30E, 30H, 31. It has an inside diameter of 2.49 inches, an outside diameter of 4.06 inches, and is .82 inches wide. Please verify measurements before ordering.833084M1 (Item #: 112189, Ref: N1585) $23.20

Release Bearing Carrier - Carrier, for clutch release bearing. Carrier bore 2.130 inch (2-1/8 inch approximate); outside diameter 2.503 inch (2-1/2 inch). PLEASE CHECK CARRIER BORE BEFORE ORDERING. For single or dual clutch. Tractors: TO35, MF35, MF50, MF65. Industrials: 20, 202, 203, 302, 2135. Use with bearing 892862M2 for DUAL CLUTCH ONLY. This is the old style for retainers with bronze bushing. (Item #: 165363, Ref: 183129M2) $21.70

Cooling System

Radiator Hose, Upper - For tractors: MF165 with Perkins Gas, MF175 with Perkins Gas or Diesel, MF255 Gas or A4-236 Diesel, MF265, MF275. Industrials: 30 Gas, 31. (Item #: 159337, Ref: 194736M1) $12.60

Thermostat Body - For tractor models 165, 165UK, 174-4S, 175, 175UK, 178, 180, 184-4, 255, 261, 265, 270, 274-4, 275, 275UK, 282, 283, 283UK, 285, 290, 290UK, 294-4, (374S, 374V, 384S, 394S all up to serial number D03066), 1745, 6500, 6530, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7870, 7880, 8500, 8530F, 8830, 8860, 8870, 8880, 24, 25, 30, 31, 50C, 50D, 50E, 50H, 60H, 6500, 6800H, 7500. Replaces 37762705. (Item #: 173114, Ref: 739379M3) $48.10

Thermostat Body Cap - For tractor models 165, 175, 180, 24, 25, 255, 265, 270, 275, 283, 285, 290, 30, 31, 50C, 50D, 50E, 50H, 60H, 6500, 6500H, 6800H. Replaces 37735651. (Item #: 173130, Ref: 735312M1) $42.10

Thermostat Housing Gasket - Used on Perkins 212, 236 and 248 engines. Massey Ferguson models 165, 168, 174, 175, 178, 184, 185, 186, 187, 188, 194, 240, 255, 261, 265, 270, 273, 274, 274SK, 275, 283, 284, 285, 290, 293, 294, 30, 307, 30D, 31, 365, 373, 374, 375, 375E, 377, 383, 384, 387, 390E, 393, 394, 397, 425, 435, 440, 445, 487, 50, 506, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 565, 575, 590, 60H, 99 (Item #: 112237, Ref: 36862151) $4.30

Water Pump - This New Water Pump comes gasket. It is used on some tractors and industrials with Perkins Engines: A4.212 (LA), A4.236 (LD), A4.248 (LF), T4.236 (LJ). Replaces 3641153M91, 3641361M91, 3638979M91, 3638980M91, 3640268M1, 2431154, 41312736, 4131A014, 4131A018, 41313228, 4222071V91, 41313204, 41313212, 4222071M91, U5MW0106, 41312736, 41313204, 41313228, 4131A035, 141313228, 4131A031 3771F01A1. (Item #: 180451, Ref: 4222071M91) $98.00

No
Picture
Water Pump Pulley - For Massey Ferguson tractor models 31, 60, 175, 255, 265, 275, Replaces Massey Ferguson OEM number 737257M1, (Item #: 165865) $62.00

Decals and Emblems

Cross Bar Assembly, with Emblem - Cross Bar with emblem for tractor models 135, 150, 165, 175, 180, 2135, 30, 31, 3165, 20 Industrial. Replaces 1860156M1, 1868759M1, 883645M1, 897881M1, 41215, 41216, 42062, 523970V91 (Item #: 104149, Ref: 1860156M1) $21.90

Drive Train

Massey Ferguson 31 8 Speed Constant Mesh Transmission Parts

8 Speed Constant Mesh Transmission Parts - Click on picture to view parts. ONLY parts that have a corresponding number are available. Some parts work only with specific serial number ranges within a particular tractor model. Not all parts work with this tractor model. Call for application and availability.

NOTE

Axle Bolt - Lock bolt for adjustable front axles. For tractors: F40, MH50, MF50, MF65, MF150, MF175, MF230 serial number 9A243032 and up, MF245 semi-swept, MF255, MF265, MF275 industrials: 20C, 30, 31, 3165 turf. Can replace 182501M1. Usable length 3-3/4 inch, equals 5-1/8 inch overall, 3/4 inch-16 thread. For tractor models MF1100, MF1105, MF1130. (Item #: 174185, Ref: 523387M1-L) $9.50

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $24.20

Bearing Cup, Differential - For tractor models FE35, TE20, TO20, TO30, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 24, 240, 240P, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 302, 31, 3165, 356, 360, 362, 3630, 3650, 375, 383, 390, 390T, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 65, 6500, 670, TO35 serial number <-169467. Replaces 1850090M91. (Item #: 117943, Ref: 185778M1) $27.10

Bearing Kit - Needle Bearing Kit. For transmission reverse idler gear. Not for shuttle, instant reverse, or 12-speed transmissions. (1) required. For tractors: TO35 serial number 171549 and up, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240. (Item #: 125327, Ref: 830735M91) $34.00

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial number up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $44.80

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $9.60

Bearing, Outer Input Housing - 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 35, 35X, 360, 362, 375, 383, 385, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 65, 670, 690, 698, 699.Used on 1860889M1 retainer. (Item #: 165439, Ref: 886668M1) $12.00

Carrier Assembly - For Epicyclic Pinion Gear. Models: 135, 150, (155, 158, 165 with Multi Power), 175, 20, 202, 203, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, (265, 275, 285, 290 with Multi Power), 30, 302, 30B, 30D, 30E, 30H, 31, 3165, 35 serial number 365360->, 360, 362, 375, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, (550, 565, 575, 590 with Multi Power), 65, 6500, 765 serial number 609714->, FE135 Coventry. (Item #: 161568, Ref: 897711M93) $347.01

Countershaft - 8 speed transmission, 17/20 spline, 15 tooth, 12.250 inches long. For tractor models 1085, 135, 150, 1505, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 165986, Ref: 906472M2) $54.00

Coupling, Rear Drive Shaft - 3.750 inches long, 10 spline. For tractor models 135, 150, 165, 175, 180, 203, 205, 20E, 20F, 2200, 235, 24, 240, 245, 25, 250, 2500, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 360, 375, 383, 390, 390T, 392S, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 60, 60H, 60HT, 65, 6500, 6500H, 670, 675, 6800H, 690, 698, 699. (Item #: 160154, Ref: 1680189M1) $36.20

Crown Wheel and Pinion Set - Ring has 38 teeth, shaft has 11 teeth, 10 spline. Approximately 9 7/8 inch- 9 15/16 inch total length. For tractor models 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 200 Series, 20E, 20F, 2200, 235, 24, 240 serial number N01001-A20286, 245, 25, 250, 2500, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275 UK, 281, 282, 285S, 290 UK, 30, 302, 304, 30E, 30H, 31, 3165, 360, 362, 365, 375, 390, 399, 40, 40E, 4500, 50, 50E, 50H, 50HX, 60H, 65, 6500, 670, 6800H. (Item #: 125330, Ref: 1664255M92) $332.00

Differential Cover - For tractor models 135, 150, 165, 175, 180, 20E, 20F, 2200, 235, 245, 250, 2500, 253, 255, 265, 272, 275, 282, 283, 285, 290, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 670, 690. Replaces 894781M3, 894780M92. (Item #: 173126, Ref: 3759150M1) $199.00

Differential Lock Fork - For tractor models 1080, 135, 165, 175, 180, 20F, 220, 235, 24, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 320, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 173511, Ref: 906807M1) $66.00

Differential Lock Fork Coupler - 6 lug. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 203, 205, 20F, 220, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 320, 356, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 4500, 50, 50A, 50C, 50E, 50H, 60, 60H, 60HT, 6500, 6500H, 670, 6800H, 690, 698, 699. (Item #: 172334, Ref: 897003M3) $81.00

Differential Planetary Thrust Washer - Used on many Ferguson and Massey Ferguson models, this washer measures 3 inches inside diameter, 4 5/32 inches outside diameter and 0.0625 inches thick. Used on 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 1200, 1250, 133, 135, 140, 148, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 261, 2620, 2640, 265, 2680, 270, 2720, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 385, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50C, 50E, 50F, 50H, 550, 565, 575, 590, 60H, 670, 675, 690, 698, 698T, 699. Replaces 897726M1, 3387282M1 (Item #: 176238, Ref: 897726M1) $8.40

Differential Plate, Right Hand - For tractors with Wet Brakes, this differential plate is used on Massey Ferguson models: 4500, 6500, 24, 25, 30, 30B, 30D, 30E, 30H, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 60HT, 1085, 245, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 50, 670, 690, 698, 699. Uses gasket 183254M1 and O-Ring 1860838M1. Replaces Massey Ferguson part number 1860882M1 (Item #: 173173, Ref: 1860882M1) $145.00

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.20

Drive Shaft, Reverse Gear - 6.580 inches in length, 1.00 inch in diameter. For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 290, 298, 30, 31, 35, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 170391, Ref: 180445M1) $22.30

Gasket, Rear Axle Trumpet Housing - Size is approximately 15-1/4 inches. Fits TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 180, 20, 20C, 20D, 2135, 2200, 230, 231, 235, 240, 240P, 245, 2500, 30, 31, 3165, 35, 40, 50, 50, 65. (Item #: 151916, Ref: 183254M1) $4.40

Gear, 1st - This gear is 1st gear for 8 speed transmission. Replaces 520700M1, 183042M1. Gear has 44 teeth and is a 18 spline. For tractor models FE35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 203, 2135, 2200, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 3165, 360, 362, 375, 383, 390, 390T, 40, 40B, 50, 50C, 50D, 50E, 65, (20F, 40E, 50H ALL UK MODELS), 35 GAS/DIESEL, 282 MEX. (Item #: 151828, Ref: 1682688M1) $80.00

Gear, 2nd - This gear is 2nd speed for 8 speed transmission. Gear has 23 teeth. For tractor models FE135, FE35, F40, MH50, TO35, 1080, 1085, 11, 165, 148, 150, 155, 158, 165, 168, 175, 178, 185, 188, 20, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 550, 565, 575, 590, 65, 765. (Item #: 173295, Ref: 180419M1) $25.90

Gear, 3rd - This gear is 3rd speed for, 8 speed transmission. Gear has 33 teeth, 17 spline and is 5.075 inches in diameter. For tractor models FE35, MH50, TO35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 590, 65, 765, FE135 COVENTRY, 2135 TURF UTIL NARROW. (Item #: 151824, Ref: 180415M1) $27.10

Gear, 3rd Mainshaft - 41 tooth, 18 spline. Used in 8 speed transmissions. For tractor models 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Replaces 1660094M1. (Item #: 165945, Ref: 1682690M1) $72.00

Gear Lever Tension Spring - This Gear Lever Tension Spring is widely used on many Massey Ferguson Tractors. Confirm part number before ordering. Replaces 192007M1, 964894M1, 180582M1 (Item #: 126830, Ref: 180582M1) $2.50

Gear, Reduction - 21 teeth, 39 spline. For tractor models 135, 150, 165, 175, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 30H, 31, 3165, 356, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 6500, 6500H, 670, 6800H, 690. (Item #: 172350, Ref: 897005M1) $114.00

Gear, Reverse - For tractor models FE35, 1080, 1085, 135, 148, 150, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 31, 3165, 35, 360, 362, 365, 375, 383, 390, 390T, 40, 40B, 40E, 50, 50C, 50D, 50E, 50H, 550, 565, 575, 65, 765, FE135 COVENTRY, TO35 serial number 17159>, 2135 TURF UTILITY NARROW. This gear is for a 8 speed transmission with 13 and 21 teeth. (Item #: 151823, Ref: 183040M1) $75.00

Gear Shift Boot - For tractor models 135, 135UK, 150, 165, 175, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 283UK, 285, 290, 298, 360, (375, 383, 390, 393, 396> serial number B06171), IND 20, 20C, 20D, 30, 31. Top hole 5/8 inch, bottom hole 2 inches. Replaces K929631. (Item #: 124263, Ref: 1678565M2) $3.00

Gear Shift Knob - Hi-low shift knob, for shift levers with 3/8 inch NF threads. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285. (Item #: 151021, Ref: 1862399M1) $8.20

Gear Shift Knob - This 4-speed shift knob is for a 3/8 fine thread lever. NOTE: may come without the face of the knob being printed in white. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF150, MF165, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 154696, Ref: 532959M1) $9.90

Gear Shift Knob, 6 Speed - 6 speed shift knob. Can replace plain knob and pattern label 1682623M1 and 1682630M1. For 20, 20C, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, MF135, MF135 UK, MF150, MF165, MF165UK, MF175, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 151022, Ref: 1862401M1) $8.10

Gear Shift Knob, 6 Speed - 3/8" UNF, engraved R-2-1-3. For tractor models 135, 135UK, 150, 165, 165UK, 175, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 670, 690, 698, 699, Ind. 20, 20C, 30, 31. (Item #: 151022, Ref: 1862401M1) $8.10

Gearshift, Retainer Lock - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 172683, Ref: 1860761M1) $25.00

Gearshift Selector - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 40, 40B, 40E, 50C, 50D, 50E, 50H. (Item #: 173128, Ref: 1862868M2) $36.80

Gear Shift Spring Retainer - This Gear Shift Spring Retainer is used on many Massey Ferguson Models. Replaces OEM numbers 180583M1, 1861024M1 (Item #: 126687, Ref: 1861024M1) $13.30

Gearshift Stop Plate - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 360, 362, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50B, 50C, 50E, 50H, 670, 690, 698, 699. (Item #: 173117, Ref: 1860764M3) $4.50

Inner Axle Bearing - This Bearing measures 66.7mm (2.626 inches) inside diameter, 110mm (4.33 inches) outside diameter, 22mm (0.866 inches) wide. Replaces 3955/394A, C9NN4874A, 1-31-741-001, 106639, 8181397, 163044, 81818397, 81826019181, 82958861, C5NN4874B, C5NN4N221B, 86503131, 81818406, 82007077, 1079649M1, 884791M92, 831488M1, 834049M1, 1079403M1, 1851392M91, 1851392M1. Verify OEM number or measurements before ordered. Many model tractors have more than one rear axle configuration. (Item #: 185648, Ref: C9NN4874A) $36.50

Inner Axle Bearing - Measuring 1.024 inch inner width, 3.244 inch inside diameter, 4.941 inch outside diameter, this bearing is used on Massey Ferguson 1080, 1085, 135, 150, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 265, 270, 275, 282, 283, 285, 290, 292, 295, 296, 297, 298, 299, 30, 30B, 30D, 30E, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 410, 420, 440, 445, 460, 465, 475, 492, 50, 50A, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 595, 60H, 670, 675, 690, 698, 698T, 699. Verify measurements or OEM number. Many of the listed models have more than one rear axle configuration. Replace Massey Ferguson part numbers 1881931V91, 1881931M91, 894776M1, 588237M1, 27687, 27620 (Item #: 173235, Ref: 1881931M91) $59.00

Input Shaft Abutment - This part sits between 195513M1 Needle Bearing and 886352M1 Spring. Replaces Massey Ferguson part number ``886353M1 (Item #: 179716, Ref: 886353M1) $13.20

Lock Nut, Pinion - Used on Massey Ferguson 133, 135, 140, 148, 165, 175, 178, 180, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, 35UK, 40, 4500, 50, 50A, 65, 6500. (Item #: 179636, Ref: 180456M1) $27.27

Main Drive Pinion Shaft Seal - Measures 1.125 inch x 1.562 inch x .250 inch. For tractor models 20, 20C, 202, 203, 2135, 30, 31, 3165, TO35, 135, 150, 165, 175, 230, 235, 245, 35, 50, 65. Replaces: 195501M1, 195870M1. (Item #: 165141, Ref: 195501M1) $4.70

Main Input Shaft Inner Bearing - This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $10.80

Mainshaft - 8 speed transmission, 18 spline, 13.50 inches long. For tractor models 1080, 1085, 1105, 1135, 1155, 135, 148, 150, 155, 158, 165, 168, 175, 180, 185, 188, 20, 20C, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 275, 285, 290, 30, 30B, 30D, 31, 360, 362, 40, 40B, 40E, 50C, 50D, 550, 565, 575, 590. Replaces 1870149M1. (Item #: 125332, Ref: 1687643M1) $111.00

Oil Seal, Axle - Outer oil seal in rear axle housing, for tractors with wet brakes. For models: MF255, MF265 except Orchard, MF275, MF285. MF298, MF398, MF399, MF690 to serial number T1301043, MF698, MF699, MF1085 Industrials: 30, 30B, 30D, 31, 40, 40B, 50A, 50C, 50D. 2 3/8 inches inside diameter, 3 3/8 inches outside diameter, 7/8 inch width. Replaces 1860954M1 (Item #: 151020, Ref: 1860954M1) $13.40

Outer Cover Seal - Measuring 4.00 inches outside diameter x 2.875 inches inside diameter, 0.375 inches wide, this is the outer seal on cover. Replaces 894736M4, 834220M1, 894763M5, 894763M2, 894763M3, 894763M4, 3699800M1, 3699800M2, 73119909, 70657582, 0657582, 657582, 6V8172, 2X5156, 8T6917, 1B4327, 1D4327, 304816C91, 290811R92, 71855C1, 270380C91, 643986C91, B132704AB (Item #: 172312, Ref: 834220M1) $17.30

Pinion Epicyclic Gear - Replacing Massey Ferguson part numbers 894769M1, 894769V1, 897769M1, 184176M1, this Planetary Gear has 12 Teeth. It is used on tractors models: 135, 145, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 250X, 253, 255, 261, 265, 270, 275, 282, 283, 290, 30, 30B, 30D, 30E, 30H, 31, 3165, 375E, 390E, 40, 40B, 40E, 410, 420, 425, 430, 435, 440, 481, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 565, 575, 590, 60, 60H, 65, 670, 675, 690, 765 (Item #: 170397, Ref: 897769M1) $48.80

Pinion Gear - For 135, 148, 150, 155, 158, 168, 175, 185, 188, 20, 240, 240P, 265, 275, 282, 30, 31, 375, 383, 390, 50H, 550, 565, 575. Pinion Gear for 8 speed transmission (28 tooth, 20 splines, 4.350 inch diameter). (Item #: 166038, Ref: 964916M1) $23.80

Pinion Jam Nut, New Style - Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $10.90

Pinion Nut Washer - Used on Massey Ferguson models: 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 30, 31, 3165, 35, FE35, 40, 4500, 50, 50A, 65, 6500, 765, 865 (Item #: 183834, Ref: 180455M1) $2.50

Pinion Shaft, Transmission - 17 teeth, 25 splines. For tractor models 135, 148, 150, 155, 158, 165, 168, 185, 188, 20, 20C, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D. Replaces 1868530M91. (Item #: 125326, Ref: 1868531M1) $98.00

Planetary Cover Plate, Front - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. Replaces 180408M2, 180408M1. (Item #: 173500, Ref: 180408M2) $17.30

Planetary Cover Plate, Rear - For the following tractors: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 180666, Ref: 184012M4) $20.40

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a tapered hole for a Set Screw. It measures 1.03 inches in diameter and is 3.26 inches long. Replace Massey Ferguson part numbers 894799M1. Used on Massey Ferguson models: 135, 150, 165, 175, 178, 180, 30, 31, 3165, 375, 383, 390, 390T, 393, 398, 40, 50 (Item #: 180205, Ref: 894799M1) $16.80

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref: 1864869M1) $22.70

Planetary Ring Gear - 45 teeth. For tractor models 135, 150, 165, 180, 20F, 2200, 235, 24, 245, 25, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30A, 30B, 30D, 30E, 30H, 31, 3165, 40, 40B, 40E, 4500, 50, 50C, 50D, 50E, 50H, 60, 60H, 6500, 670, 690. (Item #: 172320, Ref: 894772M2) $387.00

Planetary Ring Gear Thrust Washer - Used on Massey Ferguson 1004, 1004T, 1080, 1200, 1250, 133, 135, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 235, 240, 245, 250, 253, 255, 260, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 3165, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 40, 40B, 40E, 410, 415, 420, 425, 430, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 560, 565, 575, 590, 592, 595, 60, 60H, 60HX, 650, 660, 670, 675, 680, 690, 698, 699, 8170, 8180, 8210, 8220, 8240, 8250, 8260, 8270, 8280. This part is 4.75 inches long and 0.50 wide. Replaces 1866542M1, 894867M1 (Item #: 179689, Ref: 1866542M1) $3.60

Planetary Selector Gearshift - For tractor models: 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 30B, 30D, 30E, 31, 35, 360, 362, 375, 383, 390, 390T, 393, 40, 50, F40, FE135 COVENTRY, FE35, MH50, TO35, Industrial: 20C, 20D, 20F, 2500, 3165, 40B, 40E, 4500, 50A, 50D, 50E, 60H, 60, 6500. (Item #: 173169, Ref: 180446M1) $17.90

Rear Axle Housing Carrier Plate O-Ring - Measuring 317.5mm inside diameter by 2.62mm thick, this o-ring is used on Massey Ferguson 1085, 1200, 1250, 135, 152, 155, 158, 165, 168, 175, 180, 185, 188, 20C, 20D, 20E, 20F, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 297, 298, 299, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E, 382, 383, 390, 390E, 390T, 393, 396, 398, 399, 40, 40B, 40E, 415, 425, 435, 440, 445, 460, 465, 475, 481, 492, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. Replaces OEM numbers 1860838M1, 1860838V1, 1860838M2 (Item #: 173237, Ref: 1860838M1) $4.80

Rear Drive Shaft Needle Bearing - Used on Massey Ferguson models: 1080, 1085, 133, 135, 140, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 283 Brazilian, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 565, 575, 590, 595, 60H, 60HX, 65, 670, 675, 690, 698, 698T, 699. This bearing replaces OEM numbers 195513M1, B1212, S1212 (Item #: 179695, Ref: 195513M1) $22.40

Seal, PTO Pinion Shaft Retainer - This PTO Pinion Shaft Retainer Seal measures 1 15/16 inches outside diameter, 1 5/8 inches inside diameter and 1/4 inch wide. Multi-Power Transmission. Replaces 1860867M4, 1860867M5, 1860867M1, 1860867M3 (Item #: 128472, Ref: 1860867M3) $5.70

Seal, Rear Axle, Inner - 3.375 inch outside diameter, 2.350 inch inside diameter, .890 inches wide. For tractor models 1080, 150, 165, 175, 178, 180, 30, 31, 40, (135, 235 Orchards), (1085, 255, 265, 275, 285 all with Dry Brakes). (Item #: 113783, Ref: 894782M2) $16.60

Shift Fork, 1st, Reverse, 2nd and 3rd - For tractor models FE35, F40, MH50, TO35, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 202, 203, 204, 205, 2135, 2200, 230, 235, 245, 255, 265, 270, 275, 285, 290, 298, 30, 31, 3165, 35, 50, 65. (Item #: 151023, Ref: 180437M1) $38.00

Shift Fork, 8 Speed - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 375, 383, 390T, 398, 399, 40, 40F, 4500, 50, 50A, 50C, 50D, 50E, 50H, 60, 60H, 60HT, 6500, 670, 690, 698, 699, (FE135 Coventry). (Item #: 165985, Ref: 897065M2) $28.70

Shift Fork, 8 Speed - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20E, 20R, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H. Shift Fork replaces 1862139M1. For 8 Speed. (Item #: 168885, Ref: 1860773M1) $53.00

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Shift Rail, 1st and Reverse - Replaces: 180442M2. For the following tractors:1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 220, 2200, 230, 231, 235240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 35, 40, 50, 65, F40, FE135, MH50, TO35 (Item #: 172890, Ref: 1678867M1) $47.00

Shift Rail, 3rd - Replaces 1678865M1. For tractor models 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 31, 40, 40B, 50C, 50H, 50E. (Item #: 182886, Ref: 1678864M1) $43.90

Side Cover Gasket - This Side Cover Gasket fits the multiple Ferguson and Massey Ferguson tractor models as a side cover gasket and a PTO shift cover gasket. It replaces original part numbers 181217M3, 181217M1, 181217M2, 181217M4, 181217M5, 181217M6, 3816331M92, 181217V3, 3816331T92. (Item #: 112236, Ref: 9N4131) $1.00

Snap Ring - Internal - For Massey Ferguson tractor models TO35, 20, 30, 31, 35, 50, 135, 150, 165, 175, 178, 230, 235, 240, 245, 2135, 3165, Compatible with Massey Ferguson Construction and industrial models 20C, 30, 31, 40, 50, 50B, 65, Replaces Massey Ferguson OEM number 195222M1, (Item #: 169491) $3.30

Transmission to Differential Shaft Spring - Used with 886353M1 abutment and 195513M1 this spring sits inside the differential input shaft. (Item #: 179661, Ref: 886352M1) $10.00

Electrical System

Alternator with Tach Drive - This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. Tach drive is appropriate for gas tractors where the tach drive is on the generator. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Item #: 164228, Ref: ADR0382) $140.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 186216M91, 186216M91, 506063M91, 522462M91 (Item #: 112273, Ref: 376852R91) $10.40

Neutral Safety Switch - This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Item #: 111507, Ref: 181140M94) $11.80

Neutral Safety Switch Boot - For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Item #: 178119, Ref: 180776M1) $13.70

Starter, LH Mount - Left Hand Mount. Order 3763363M91 if you have a Right Hand Mount. Has 3.5 Inch center-to-center bolt pattern. Replaces; 3597371M2, 1868283M3, 1868283M5, 1691805M1, 1691805M2, 3027466M1, 3609526M91, 1680065M1, 1680068M1, 3763363M92. Replaces Lucas: 26274, 26274A, 26274A/D, 26274D, 26274E, 26274E/F, 26274H, 26274H/N, 26295, 26295A, 26295A/B, 26295B, 26295D, 26295D/E, 26295E, 26295F/M, 26320, 26320A/B, 26320D, 26323, 26323A, 26345, 26345A/B, 26345D/J, 26366, 26366A/F, 26410, 26410A, 26410A/B, 26410B, 26414, 26414A/E, 26414E, 26925193A, 26925193D, 27515, 27515A, 27515A/E, 27515E, 27523, 27529, 27539A, 27539B, 27539C, 27539D, 27539E, 27572, 27572B, 27572D, 27578, 27578A, 27578B, 27578D, 27583, 27583A, 27583B, 27583D, 27583H, 27583J, 27599A, NSB531, NSB540, 26404, 26404A, 27536 (Item #: 112303) $165.00

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 189158M1, 189158M91, 767828M91. (Item #: 121141, Ref: R7994) $13.40

Engine Bearings

Main Bearings .010, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Replaces 0676869, 735168V91, 70251338, U5MB0034, 31126391, 31126371, U5ME0026, 81558, 735168M91, U5MB0034, 1076770M91, 676869, 31126361, 837840M91, 3118150R1, 31126381 (Item #: 107182, Ref: 735169M91) $21.00

No
Picture
Main Bearings .020, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Item #: 735170M91) $19.80

No
Picture
Main Bearings, .030, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Item #: 735171M91) $19.80

No
Picture
Main Bearings, STD, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Main Bearings Complete Kit. 4 Pair. (Item #: 735168M91) $18.90

No
Picture
Rod Bearings .010, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. (Item #: 107119, Ref: 736951M91) $13.20

No
Picture
Rod Bearings .020, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. (Item #: 107120, Ref: 736952M91) $14.50

No
Picture
Rod Bearings .030, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. Replaces 3118138R1, 736953M91, 85042C, 033 - 2384, 2192081, 70251359, U5ME0002C, CB-667AL-030, CB667AL. (Item #: 107121, Ref: 736953M91) $14.60

No
Picture
Rod Bearings, STD, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 50C, 175, 180, 255, 265, with A4-236 Direct Injection Perkins Diesel), (275 with engine serial number prefix 248UA or LF---N or LF---U only, with A4-248 Direct Injection Perkins Diesel), (290 Early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, all with A4248 direct injection Perkins Diesel 4 Cylinder. Connecting Rod Bearings complete kit. 4 Pair. Standard. (Item #: 107118, Ref: 736950M91) $15.80

Sealing Ring - For Massey Ferguson tractor models 20, 30, 31, 35, 35X, 135, 148, 150, 165, 175, 178, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 292, 298, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 420, 440, 492, 550, 565, 575, 590, 595, 670, 675, 690, 698, 699, Replaces Massey Ferguson OEM number 3699909M1, 907315M2, 3609471M1, 3699909V1, 186198M1, 2" O.D. x 3/32", (Item #: 165441) $6.90

Engine Gaskets

Crankshaft Seal, Front, Lip Type, Perkins 236 and 248 Diesel - For tractor models 31, 6500, 175, 180, 255, 265, (275 engine serial number prefix 248UA or LF---N or LF---U only, (290, 294-4, 690 engine serial number prior to LF---U839080J) all with 236 and 248 CID. (Item #: 107222, Ref: 1447690M1) $10.10

Crankshaft Seal, Rear, Lip Type, Perkins - Used on Perkins Engines AG3-152, AD3-152, AD4-203, A4-236, A4-248, A4-318. For tractor models 135, 150, 20, 40, 2500, 230, 235, 4500, 200B, 245, 20C, 30B, 250 with engine serial number prefix CE22488U or CE31089U, 65, 165, 255, 30, 40B, 50, 302, 304, 356, 3156, 300, 175, 180, 265, 31, 6500, 275 with engine serial number prefix 248UA or LF---N or LF---U, 290 early with 4 ring piston, 294-4, 690 prior to engine serial number LF---U839080J, 285, 1080, 1085, 540. (Item #: 107230, Ref: 1447049M91) $19.10

Crankshaft Seal, Rear, Rope Type, Perkins - For tractor models late 165 w/AG4-212UA, 175, 180, 255, 265, 275, 31, 50C, 6500 all with 236 or 248 CID Direct Injection Perkins Diesel. Injectors at angle in cylinder head. Price shown is for each, sold only in multiples of 2 items. OEM numbers 735942M91, 731626M1, 4224056M1, and 36883108. (Item #: 107232, Ref: 735942M1) $2.20

Front Cover To Timing Gear Housing Gasket - Price shown is for each, sold only in multiples of 2 items. For tractor models 165, 1745, 175, 180, 184-4, 220, 24, 25, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 300, 3050, 3060, 3070, 31, 362, 375, 383, 390, 670, 6800H, 6830, 6830C, 6830FC, 6860, 6870, 6880, 690, 7830, 7830C, 7860, 7870, 8530F, 8830, 8860, 8870, 8880. Replaces 36813137. ** Must be ordered in qty of 2, price is for 1. (Item #: 173234, Ref: 734887M1) $15.20

Gasket Set, Engine Top, Perkins 236 and 248 Diesel - Gasket Engine Top Set. For (175, 180, both with engine serial number prior to 236UA109215L), (255 and 265 serial number 236UA109215L and up), (275 with engine serial number prefix 248UA or LF---N or LF---U Only), all with A4-248 Direct Injection Perkins Engine. Engine Top Gasket Set. Does not include crankshaft seals. Use with bottom set part number 747191M91. (Item #: 107260, Ref: 3638661M91) $39.50

Oil Pan Gasket, Perkins - Oil pan gasket. For tractor models 31, 50C, 6500, MF175, MF180, MF255, MF275, MF290, MF294-4, MF690. Replaces 3640406M1, 3641273M1, 36815721, 3638519M1, 746425M1, 291981A1, 3681K004, U5MK0600, 36815721, 36815707 (Item #: 107283, Ref: 3638519M1) $13.20

Timing Gear Housing Gasket - This timing gear housing gasket is for tractor models 165, 1745, 175, 180, 194-4, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 3070, 31, 375, 383, 390, 50C, 50D, 50E, 50H, 60, 6500, 670, 6830, 6830C, 6830FC, 690, 7830, 8530F. Replaces 36814127, 36814123. Price shown is for each, sold only in multiples of 2 items. (Item #: 173312, Ref: 742474M1) $15.00

Engine Rebuild Kits

Basic Engine Kit, Perkins 236 Diesel - For tractor models 31, 175, 180, 265 and 6500 both with engine serial number prior to 236UA109215L using A4-236 Direct Injection Perkins Diesel 3.875 inch standard bore, with injectors at angle in cylinder head. Kit contains sleeves, pistons, rings, pins and retainers. Pin bushings. Complete gasket set and crankshaft seals. Engine bearings and thrust washers not included, must be ordered separately. Please see "engine bearings" category. (Item #: BEKP178-LCB) $504.85

Engine In-Frame Kit, Perkins 236 Diesel - For tractor models 31, 175, 180, 265 and 6500 both prior to engine serial number 236UA109215L. Perkins A4-236 Diesel, direct injection, 3.875 inch standard bore, injectors at angle in cylinder head. Basic In-Frame Engine Kit includes: sleeve and piston kit with rings, pins and retainers, top engine gasket set and oil pan gasket. PISTON PIN BUSHINGS REQUIRE HONING TO FIT PINS. (Item #: 184173, Ref: BIFP178) $587.00

Engine Overhaul Kit, Perkins 236 Diesel - For tractor models 31, 175, 180, 265 and 6500 both with engine serial number prior to 236UA109215L using A4-236 Direct Injection Perkins Diesel, 3.875 inch standard bore with injectors at angle in cylinder head. Engine Overhaul Kit less bearings. Contains Sleeve and Piston Kit: sleeves, pistons, rings, pins and retainers. Pin bushings. Complete gasket set, crankshaft seals, intake and exhaust valves, valve keys, springs. Engine bearings and thrust washers must be ordered separately. Please see "engine bearings" category. (Item #: 192610, Ref: EOK178-LCB) $512.00

Engine Overhaul Kit with Crankshaft - Used on Perkins A4-236 Engines up to engine serial number 236UA103063, this engine kit contains Piston, Ring, Pins, Retainers, Sleeves, Overhaul Gasket, Crankshaft Seals (two piece rope type rear seal), New Crankshaft, Rod Bearing and Main Bearings. This engine kit has 735187M91 short type pistons, with 2.752 inch compression height. (Item #: 184000, Ref: EKMC16) $1169.01

Engine Overhaul Kit with Crankshaft - Used on Perkins A4-236 Engines. serial number from 236UA103064L to 236UA109214L, this engine kit contains Piston, Ring, Pins, Retainers, Sleeves, Overhaul Gasket, Crankshaft Seals (one piece lip type rear seal), New Crankshaft, Rod Bearing and Main Bearings. This engine kit has 735187M91 short type pistons, with 2.752 inch compression height. (Item #: 184003, Ref: EKMC1610) $1469.01

Engine Parts

Balancer Unit with Oil Pump - Four Bolt Mount, Front Mount. For tractor models 1745, 175, 180, 184-4, 220, 24, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 3070, 31, 50, 50C, 50H, 60, 60HT, 6500, 6500H, 670, 6800H, 6830, 6830C, 690, 7830, 8830. Replaces 739128M91, 743206M91, 41733082, 41733043, 41733066, 41733056, 41733402, 47133049, 41733062, 41733049. (Item #: 116864, Ref: 746432M91) $321.00

Camshaft - Camshaft for Perkins Diesel Engines. For A4-236 in tractors: MF174-4S to engine serial number U08336N, 175 engine serial number 236-UA19817 and up, 180 engine serial number 236-UA19817 and up, MF184-4, MF255, MF265, MF270, MF274-4, MF670; Industrials: 31, 50D, 50E. For A4-248 in tractors: MF194-4, MF275, MF290, MF690; Industrial 50C. Replaces Perkins 31415321. (Item #: 173129, Ref: 736818M1) $125.00

Cylinder Head - For tractor models 175, 180, 20, 255, 265, 275, 31, 40 all with Perkins A4.236 and A4.248 Diesel Engines. Cylinder head includes valves, guides and springs, assembled. Replaces ZZ080054, 743112M1. (Item #: 3637486M1) $847.98

Flywheel Tab Washer - This Flywheel Tab Washer is used on Massey Ferguson 35, 50, 65, 135, 150, 165, 175, 180 230, 235, 245, 255, 265, 275, 231, 240, 250, 253, 360, 362, 270, 282, 283, 375, 383, 390, 390T, 398, 399, 202, 203, 204, 205, 302, 304, 20, 2135, 20C, 30B, 40B, 20D, 30E, 40E, 30, 31, 40, 3165. It Replaces 731192M1, 731192M1, 731192V1 (Item #: 153307, Ref: 731192M1) $1.40

Gear, Idler - 63 tooth. For tractor models 165, 168, 1745, 175, 178, 180, 184-4, 185, 188, 220, 255, 265, 270, 274-4, 275, 282, 283, 285, 290, 294-4, 30, 300, 3050, 3060, 31, 50C, 50D, 50E, 50H, 565, 575, 590, 60, 6500, 670, 6830, 6830C, 6830FC, 6860, 6870, 6880, 7830, 7830C, 7860, 7880, 8530F, 8830, 8860, 8870, 8880, (675, 690 early models with engine A4.212 or A4.248 engine), 910. Replaces 41115023. (Item #: 167783, Ref: 734738M91) $100.00

No
Picture
Thrust Washer, Upper, Perkins Diesel - For tractor models (175, 180 engine serial number 4812575 and up), 265, 31C 6500, 255, (275 engine serial number prefix 248UA or LF---N or LF---U only), (290, 294-4, 690 engine serial number prior to LF---U839080), 50C. Price shown is for each, sold only in multiples of 2 items. (Item #: 747128M1) $6.51

No
Picture
Valve, Exhaust, Perkins 236 and 248 Diesel - Exhaust valve, Stellite, replaces 741257M1. For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 2 items. (Item #: 167089, Ref: 747552M1) $12.40

No
Picture
Valve, Intake, Perkins 236 and 248 Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 2 items. (Item #: 166899, Ref: 739027M1) $6.10

No
Picture
Valve Keys, Pair, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 4 items. (Item #: 166810, Ref: 736453M1) $1.00

No
Picture
Valve Overhaul Kit, Perkins 236 and 248 Diesel - Valve overhaul kit. Contains intake and exhaust valves, springs, and keys. For 31, 50C, 6500, MF175, MF180, MF255, MF265, MF275, MF290, MF294-4, MF690 (Item #: 131587, Ref: VOKP236) $143.00

No
Picture
Valve Service Kit - For tractor models 31, 50C, 6500, MF175, MF180, MF255, MF265, MF275, MF290, MF294-4, MF690. Contains: springs, locks, (no valves). (Item #: VSKP236) $55.13

No
Picture
Valve Spring, Inner, Intake and Exhaust, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 4 items. (Item #: 735525M91) $3.34

No
Picture
Valve Spring, Outer, Intake and Exhaust, Perkins Diesel - For tractor models 6500, 31, 175, 180, 265, 255, 50C, (275 engine serial number prefix 248UA or LF---N or LF---U) only, (290, 294-4, 690 all with engine serial number prior to LF---U839080). Price shown is for each, sold only in multiples of 4 items. (Item #: 735521M1) $4.07

Engine Pistons and Sleeves

No
Picture
Piston, Perkins 236 Diesel - 236 CID 4 Cylinder Diesel Engine, 3.875 inch standard bore. Piston with pin oil groove holes 10 top, 12 bottom. For 31, 50C, 6500, MF175, MF180, MF255, MF265. (Item #: 168956, Ref: 735187M91) $68.00

No
Picture
Sleeve and Piston Kit, Perkin 236 Diesel - For tractor models 31, 175, 180, 265 and 6500 both prior to engine serial number 236UA109215L, all with A4-236 Direct Injection Perkins Diesel, 3.875 inch standard bore. Sleeve and Piston Kit includes sleeves, pistons and rings, pins and retainers. (Item #: PK78) $330.29

Sleeve, Perkins 236 Diesel - Cylinder liner. 236 CID 4 cylinder diesel, 3.875 inch standard bore, injectors at angle in cylinder head. For tractor models 31, 50C, 6500, 750, 760, MF1100, MF1105, MF1130, MF1135, MF175, MF180, MF255, MF265. (Item #: 128641, Ref: 736507M3) $29.20

Engine Rings

No
Picture
Ring Set 1 Cylinder, Perkins 236 Diesel - Ring set, for 1 piston. Can replace 738404M91 and 745769M91. For 31, 50C, 6500, MF1100, MF175, MF180, MF255, MF265 (Item #: 107050, Ref: 836583M91) $14.90

Exhaust System

Manifold - For tractor models (175, 184-4, 270, 283, 290, 31, 362, 50E, 50H, 60H), 165 with A4.236 Engine, (168, 178, 185, 188 all with Engine Type A4.236/A4.248) 60 Back Hoe, (6500, 6800H all Forklift) (24, 25 all handler) 11 Loader, 220 Skidder. Exhaust Manifold is used with a 90 Degree Elbow. Replaces 37781781, 736206M1. (Item #: 101630, Ref: 733206M1) $35.80

Manifold To Elbow Stud and Nut - This Stud is 1-5/8 inches long with 3/8 UNF (Fine) Thread. It replaces 0826232, 731866M1, 731862M1, 734697M1, 10826403, 0826403, 0826439, 0826481 (Item #: 180454, Ref: 734697M1) $3.50

Muffler, Horizontal - Round body 3-1/4 inch shell diameter, A= 2-3/4 inch inlet length, B= 2 inch inlet inside diameter, C= 16-1/2 inch shell length, D= 12-1/2 inch outlet length, E= 2 inch outlet outside diameter, F= 32 inches overall length. For tractor models (30, 20, 31, 32, 40B, 50 all with gas or diesel engine), (230, 240, 250 all with Perkins Gas or Diesel Engine), (290 with Perkins Gas or Diesel Engine also must use 898534M1 OEM number tailpipe). (Item #: 102428, Ref: 508825M94) $47.60

Fuel System / Air Intake

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. For tractor models (1100 serial number up to 8838067), (1130 serial number up to 88T0173), (135 serial number 9A10311 and up), (150 serial number 9A24714 and up), 165, 175, 180), (35 serial number 240398 and up), (35 Turf, 35 Utility both serial number 655000484 and up), (50 serial number 535223 and up), (65 serial number 697565 and up), (Super 90 serial number 6906208 and up), (2135 Utility and Turf serial number up to 9A10311), (300 serial number up to 29E7574), (410 serial number up to 6909990), (510 serial number 8823113 Thru 8838). (INDUSTRIAL/CONSTRUCTION: 20, 203, 205, 2200, 2500, 30, (302 serial number 119700021 and up), (304 serial number 119750021 and up), 31, 3165), 40), 50, 50A). Replaces original part numbers 1447072M91, 1876507M91, 193229M91, 193239M91, 3597838M91, 883786M91. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $34.00

Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $16.30

Fuel Injector - For 50C, MF175, MF180, MF265. Replaces: (1446761M91 Used Engine Serial Number 236UA43100 And Up) and (734722M91 Used Prior To Engine Serial Number 236UA43100). Replaces 1446761M91 and 1447228E91 (Item #: 115533, Ref: 1446761M91-EX) $54.00

Fuel Injector Banjo Bolt - This Banjo Bolt is used on Perkins Engines with CAV type Injection Systems. It replaces original part numbers 731567M1, 95315, 067 - 6312, 70251292, 71011878. Uses 2 gaskets order part #921176. (Item #: 168628, Ref: 0095315) $1.60

Fuel Injector Nozzle - For Massey Ferguson tractor models 31, 175, 180, Compatible with Massey Ferguson Construction and industrial models 6500, Replaces Massey Ferguson OEM number 1853029M91, Bosch No.: DLL 150S 324, CAV No.: BDLL 150S 6382, (Item #: 113540) $27.40

Fuel Injector, Remanufactured, 1446761M91, 1447228M91 - For Massey Ferguson tractor models 31, 50, 165 (U.K.), 174, 175, 178, 180, 184, 265, 270, 274, 275 (U.K.), 294, 365, 374, 384, 670, Compatible with Massey Ferguson Construction and industrial models 31, 50C, 50D, 50E, 50F, 50H, 60, Replaces Massey Ferguson OEM number 1446761M91, 1447228M91, 1447228E91, For a New version of this sku use Item #: 115533, (Item #: 210582) $80.01

Fuel Injector Washer - One of these is used per Injector on Perkins Engines with CAV type fuel systems. It replaces 376 091X1, 376091X1, 396091X1, 921173, TX50039, 115 16 214, 118358ES, 159553A, 1830 105 000, 70251284, 81716268, M03-47-03 (Item #: 168623, Ref: 921173) $0.70

Fuel Lift Pump - Fuel pump for A4-236 and A4-248 Diesel Engines, four-hole mounting. For tractors: MF175 engine serial number 236UA57083 and up, MF180 engine serial number 236UA57265 and up, MF184-4, MF255, MF265, MF270 early production, MF274-4 to tractor serial number 221N00936, MF275, MF294-4 to tractor serial number 2230003. Replaces 1447017M91, 1447688M91, 3637290M91, 3637300M91, 3637444M91, 3640785M1, 3641402M91, 375839X1, 376522X1, 4222091M91, 4222108M91, 740861M1, U5T0059, 3637300M1. This Pump uses S40567 Repair Kit. (Item #: 117603, Ref: 3637300M91) $22.80

Fuel Line Seal Kit - This kit includes: 4 33811115 (3/8 O.D. 1/4 I.D. 1/4 W) sleeves, 7 33811113 (7/16 O.D. 1/4 I.D. 1/4 W) sleeves, 4 33811112 (5/16 O.D. 3/16 I.D. 3/16 W) sleeves, and 8 921176 Injector Nozzle Washers. This will service the fuel lines on many 3- and 4-cylinder Perkins equipped models. Perkins 152, 203, 212, 236, 248 Diesel Engines. There will be extra pieces when servicing a 3-cylinder engine. Replaces Perkins 33811115, 33811113, 33811112, 921176, 0921176. Replaces Massey Ferguson 376527V1, 376527X1, 376525X1, 376525V1, 376524X1, 376524V1, 376518V1, 376518X1 (Item #: 187517) $11.50

Fuel Pump - Fuel Pump for AD4-236 Diesel Engines, two-hole mounting. For tractors: MF175 to engine serial number 236UA57083, MF180 to engine serial number 236UA57265. Industrial: 31 to engine serial number 236AU57265. Replaces 3637287M91, 3637287M92, 4222104M91, 881303M91, 881303M92, 2641465, 2641478, 881303M91, 1447381M91, 3637287M91. Uses S40569 Repair Kit. (Item #: 106200, Ref: D8NN9350AB) $22.50

Fuel Pump Repair Kit - This Fuel Pump Repair Kit is used to repair fuel pump part numbers: D8NN9350AB, 3637287M91, 3637287M92, 4222104M91, 881303M91, 881303M92 2641465, 2641478, 881303M91, 1447381M91. Replaces part numbers 1883344M92, 1883344M92, 26410050, 738239M91. (Item #: 172699, Ref: S40569) $20.60

Injection Pump - This injection pump fits Perkins AD4.236 engines. For tractor models MF175, MF180, MF255, MF265, MF270, MF275, MF6070, Industrials MF6500, MF31, MF50C, MF50D. Replaces 1447267M1, CAV3241F360, 1446876M91, 3240758, 3241360, 883545M, 883545M91, 899070M, 899070M91. (Item #: 117637, Ref: 1446876M1) $850.00

Injector Leak Off Line Washer - Two of these are used per injector on Perkins Engines using CAV type fuel Systems. Replaces 376518X1, 921176, 067 - 7011, 159048A, 500730, 70251294, TX10361, TX50047, 380428S, 81821105. (Item #: 168625, Ref: 921176) $0.60

Injector Line Leak Off - This Injector Line Leak Off pipe is used on 4 cylinder Perkins Engines with CAV type fuel systems. It replaces 35587344, 734723M91, 035 - 8008, 70257263 (Item #: 165870, Ref: 35587344) $35.10

Injector Line Set - This kit contains Massey Ferguson part numbers: 744512M91 No. 1 Cylinder Line Assembly (Perkins No. 35343025), 744513M91 No. 2 Cylinder Line Assembly (Perkins No. 35343026), 744514M91 No. 3 Cylinder Line Assembly (Perkins No. 35343027) and 744515M91 No. 4 Cylinder Line Assembly (Perkins No. 35343028). It is used on 4 cylinder Perkins Engines with CAV type fuel systems. This set replaces OEM numbers 35343025, 35354266, 3641094M91, 735099M91, 744512M91, 353403025, 35354266, 3641094M91, 3641262M91, 735100M91, 744512M91, 744513M91, 35343027, 35354293, 3641095M91, 735101M91, 735761M91, 744514M91, 35343028, 35354289, 3641156M91, 735102M91, 735102M92, 738890M91, 744515M91. Verify your numbers with parts manual. For Fuel Line Seal Kit order 187517 (Item #: 178167, Ref: S41522) $43.57

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $38.20

Injector Pump Repair Kit - Fits CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $19.00

Gauges

Ammeter Gauge - Fits Massey Ferguson 31, (135 serial number 9A146750>), 150, (165 serial number 9A146750>), 175, 180, 1080, 1100, 1130 and 1150. Replaces 504677M91 and 528418M92. (Item #: 173067, Ref: 528418M92) $26.80

Fuel Gauge - Black Bezel, bar gauge for Models: 135, 150, 165, 175, 180, 1080, 1150, 31. Also replaces 528424M91. (Item #: 104119, Ref: 1074336M91) $25.60

Oil Pressure Gauge - This oil gauge is 2 inches, has a black face and chrome bezel. For tractor models 1080, 1100, 1130, 1150, 135, 150, 165, 175, 180, 31. Replaces 504687M92 and 528415M91. (Item #: 173317, Ref: 528415M91) $30.20

Proofmeter Drive Assembly - For a DELCO Alternators and Generators. This improved design uses a steel drive gear (originals used a fiber gear). Proofmeter Drive Assembly mounts on original type generator. Fits TO20, TO30, TO35, 35, 50, 65, 85, 88, Super 90, 135, 150, 175, 180, 1080, 1100, Industrials: 30, 31, 35 Turf and Utility, 50, 2135, 2200, 2500, 3165, 202, 204. ALL GAS ENGINES. Includes housing, 2 drive gears and gaskets. 7/8 - 18 threads. Does NOT include cable. (Item #: 113771, Ref: 1751295M91) $26.70

No
Picture
Tachometer Cable - Tachometer Cable Assembly, 27 inches in length. For tractors: MF35 diesel to serial number 227941, MF50 diesel, MF150, MF165 diesel, MF235 diesel Orchard, MF245 diesel Orchard Industrials: 30, 31, 203, to serial number 659000971, 205 to serial number 659100580. (Item #: 121522, Ref: 506335M91) $17.80

Water Temperature Gauge - This temperature gauge has a 72 inch Capillary tube, 2 inch Face Diameter, Chrome Ring. 180 degree normal temperature setting, 220 degree pegs top end. 5/8 inch UNF connector. TO20, TO30, TO35, FE35, F40, MH44, 50, 333, 444, 555, MF35, 50, 65, 85, 88, Super 90, 135, 165, 175, 178; ind. 20, 30, 31, 40, 50A, 70, 80, 202 Work Bull, 2200, 3165. Replaces: 1078125M91, 1079390M91, 180727M91, 180727M93, 182652M92, 1850512M94, 881396M91, 899455M91, 108727M93, 1078125M91, 0236708, 1078125M91, 180727M91, 180727M92, 180727M93, 881369M91, 899455M91 (Item #: 104116, Ref: 180727M91) $24.60

Hitch / Drawbar

Crank Arm, Leveling Box - This Leveling Box Crank Arm is for tractor models TE20, TEA20, TO20, TO30, TO35, 20, 31, 35 (France), 35, 35X (France), 40, 50, 65, 130 (France), 135 (UK), 135, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), 180, 205, 230, 231, 231S, 235, 240 (S, Turkey), 240, 240P, 241, 245, 250, 253, 255, 261, 263, 265, 265S (S, Turkey), 270, 271, 275 (UK), 275, 281, 282, 283 (UK), 283, 285S (S, Turkey), 290 (UK), 290, 298, 302, 304, 360, 362, 365 (s/n: B18009-earlier), 375, 383, 390, 390T, 393, 394S (s/n: D03066-earlier), 396, 398, 399, 698, 2135, 2200, 3050, 3060, 3065, 3070, 3090, 3095, 3125 (France), 3125, 3140, 3165, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 40B, 40E, 50C, 50D, 50E, 202. Replaces Replaces 81822432, 81717231, C5NN594E, 957E594, 888607M1, 1662382M1, 181349M1 (Item #: 172986, Ref: C5NN594E) $9.10

Lift Arm End, LH - Lift arm end, category I, left hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Item #: 150266, Ref: 184464M92_) $51.00

Lift Arm End, RH - Lift arm end, category I, right hand, 7/8 inch pin hole. For tractor models 65, 85, Super 90, 165, 175, 180, 255, 265, 270, 275, 283, 290, 375, 383, 390, 390T, 393, 670, 690, 30, 31, 50E. (Item #: 150265, Ref: 184463M92) $49.60

Lower Lift Arm Attaching Shaft - Replacing Massey Ferguson part numbers 184356M1, 893419M1, this shaft comes with hardware. It is 3/4 UNF thread on both sides. Used on Massey Ferguson 1080, 133, 135, 140, 145, 150, 152, 155, 165, 175, 178, 180, 30, 31, 40, 50, 65, 765, 865. Verify part number or thread size before ordering. Many of the models used more than one size. (Item #: 174701, Ref: 893419M1) $13.10

Hydraulic System

Auxiliary Pump Drive Gear - This Auxiliary Pump Drive Gear has 58 teeth and 10 splines. It is used on Massey Ferguson models 135, 150, 165, 175, 178, 180, 30, 31. Replaces OEM number 515957M1 (Item #: 190753) $184.00

Auxiliary Pump Drive Gear - This Auxiliary Pump Drive Gear has 58 teeth and 21 splines. It is used on Massey Ferguson models 135, 150, 165, 175, 20C, 20E, 230, 235, 240, 240S, 243, 245, 250, 250X Brazilian, 253, 255, 265, 270, 275, 283, 290, 30, 30E, 31, 40B, 451, 50C, 50E. Replace OEM number 1868540M1 (Item #: 187207) $176.00

Control Lever Roller - Used on Mark I and Mark II Massey Ferguson hydraulic pumps, this roller fits some of the following models: 20, 20C, 202, 203, 205, 2135, 2200, 30, 302, 304, 31, 3165, 40, FE135, 135, 135 UK, 150, 165, 175, 180, 230, 245 (Item #: 179419, Ref: 898202M1) $5.10

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.90

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $19.10

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $12.70

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.00

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $5.70

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $450.00

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $116.00

Hydraulic Filter Kit - This Kit contains 521451M1 filter, 185839M91 cap and 185555M1 bowl. It is used on Massey Ferguson models: 1080, 135, 145, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 245, 30, 31, 3165, 35, 35X, 40, 50, 65, FE35 (Item #: 184914, Ref: 185839M92) $27.40

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Piston - This is an early style 3-3/8 inch, three ring piston. It uses 3 - 897597M1 rings, sold separately. Used on 135, 135 UK, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31 combine, 20, 30, 175 UK, 178 UK, 20C, 30B, 40B, 50C, 50D, MF 40. Replaces 899596M91 (Item #: 179572, Ref: 899596M91) $34.30

Hydraulic Piston - For tractor models 135, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50D, 50E, 670, 698, 699. Seal kit is available as part number 2528201K1 . Piston is 3.375 inch diameter. (Item #: 173143, Ref: 1665738M91) $48.90

Hydraulic Piston Ring - Used on 899596M91 3 -3/8 inch piston. Three are required. Priced and sold individually. Replaces original part number 897597M1. For tractor models 135, 165, 175, 180, 230, 235, 245, 255, 261, 265, 275, 31, 20, 30, 175, 178, 20C, 30B, 40B, 50C, 50D and 40. (Item #: 176230, Ref: 897597M1) $6.10

Hydraulic Pump Camshaft - This new Hydraulic Pump Camshaft has 10 Splines. It is used on some Massey Ferguson Models: 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 285, 30, 31, 3165, 40, 50. Some of these models used a 21 spline shaft. Verify before ordering. Replaces part numbers: 1809105M91, 1809048M1, 889154M91, 899154M91, 899915M92 (Item #: 165602, Ref: 1809105M91) $83.00

Hydraulic Pump Camshaft Bushing - This Hydraulic Pump Camshaft Bushing is used on MK1 and MK2 Pumps. It has an inside diameter of 1-3/8 inches, outside diameter of 1-5/8 inches and is 7/8 inches wide. Replaces OEM numbers: 1664491M1, 1664491M2, 195949M1, 1865012M1, 1865012M1 (Item #: 167290, Ref: 1664491M1) $5.60

Hydraulic Pump Filter O-ring - This O-Ring is used with 185555M1 cap and Bowl Set. (Item #: 178156, Ref: 831907M1) $0.50

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring and Gasket Kit is used on 135, 150, 165, 175, 180, 255, 265, 275, 30, 31, 40, 3165. It replaces 1810684M92 (Item #: 173310, Ref: 1810684M92) $7.70

Hydraulic Pump Rear Cam Block, Used - For Massey Ferguson tractor models F40, TO35, 30, 31, 35, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 205, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 565, 575, 590, 595, 675, 690, 698, 699, 1080, 1085, 2135, Compatible with Massey Ferguson Combine(s) 40, 550, 765, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 302, 304, 765, 2200, 2220, 3165, Replaces Massey Ferguson OEM number 894608M1, For a new version of this item use Item #: 113790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460533) $13.26

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Peg with Hand Bake - Used on Massey Ferguson models: 165, 168, 175, 178, 185, 188, 20F, 230, 240, 250, 253, 261, 275, 283, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. This peg supports the hydraulic pump on the inside of the tractor, and a hand brake on the outside of the tractor. If you need a gasket, order part number 180904M1. (Item #: 189383, Ref: 898937M1) $37.60

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.80

Hydraulic Valve - For tractor models 1080, 135, 148, 165, 168, 175, 178, 185, 188, 20C, 230, 240, 245, 250, 255, 265, 275, 285, 290, 298, 30, 30B, 30E, 31, 350, 355, 365, 375, 390, 398, 399, 40, 40B, 50C, 50E, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. This valve is 7.75 inches long. Replaces 3000261X1, 1870763M92, 1681786M1 (Item #: 165752, Ref: 1870763M92) $39.20

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $527.00

$Massey Ferguson 31 Lift Arm, LH\RH$
Lift Arm, LH/RH - Used with 897567M3 Cross Shaft (51 spline). It uses a 7/8 inch pin. For tractor models 1080, 1085, 165, 175, 180, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. Replaces 1680040M91, 1680033M1, 1680040M91, 885445M91, 885447M1, 885448M1, 897579M1. (Item #: 151048, Ref: 1680040M91) $57.00

Lift Clevis - This lift clevis, has on the inside of the yoke, a multi-level face. If you need a smooth face on the inside of the yoke, this is not the correct part and we do not have what you need available. For tractor models 135UK, 165, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 30, 302, 304, 31, 3165, 35, 40, 50, F40, MH50, TO35. Hydraulic Lift Clevis. (Item #: 173304, Ref: 180972M2) $29.40

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Clevis Bushing RH - Right hand slotted bushing for rocker on draft control clevis. For 135, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 230, 245, 30, 302, 304, 31, 3165, 35, 40, 50, 65, F40, FE35, MH50, TO35. Replaces 181982M1, 180974M1 (Item #: 153600, Ref: 181982M1) $6.50

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder Piston Seal Kit - Used with 1665738M91 piston. For tractor models 20, 20C, 30, 30B, 30D, 31, 40, 40B, 40E, 50C, 50E, 135, 165, 175, 180, 230, 235, 245, 255, 265, 270. (Item #: 173353, Ref: 2528201K1) $7.60

Lift Handle Knob and Stud - Knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. Replaces 1860403M1, 898201M1 (Item #: 163511, Ref: 1860403M1) $9.30

Lift Pump - For tractor models 135, 150, 165, 175, 20C, 235, 245, 255, 265, 275, 30, 31, 40B, 50C, 50D, (30E, 50E, 178 ALL UK). 12 Spline Shaft. (Item #: 119896, Ref: 886821M94) $222.00

Lift Pump Cap Kit Bowl - For 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, FE135, FE35. Hydraulic Pump Cap Kit Bowl. Replaces 185839M1, 185555M1 (Item #: 178614, Ref: 185555M1) $12.10

Lift Pump Coupling - 10 spline coupling for models: 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, F40, FE135, FE35, MH50, TO35. (Item #: 173680, Ref: 180926M1_) $58.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $8.90

Lift Pump Filter - Filter element is top mount. 2-7/16 inch outside diameter, 1-29/32 inch inside diameter and 4 inches long. For tractors: MF35, MF50, MF65, MF85, MF88, MF90, MF1080 industrials: 202, 203, 204, 205, 302, 304, 2135, 2200, 3165. Also the following tractors with pumps having 10-spline camshaft: MF135, MF150, MF165, MF175, MF180 Industrials: 20, 30, 31, 40, 302, 304. For MF1100, MF1105, MF1130. Replaces 521451M1, 185551M92 (Item #: 172545, Ref: 521451M1) $11.00

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.20

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.90

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Item #: 165752, Ref: 1681789M91) $39.20

Link Head - For tractor models 135, 165, 175, 180, 20, 20C, 20D, 20F, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 298, 30, 30B, 30D, 30E, 31, 362, 383, 390T, 391, 392, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698, 699. (Item #: 172689, Ref: 1863389M1) $47.80

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $28.00

Pressure Control Diaphram - Used on Mark III pumps, this diaphram has a 0.779 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. Replaces 1860114M91, 1860114V91 (Item #: 172378, Ref: 1860114M91) $13.60

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $3.90

Quadrant Support - This Quadrant Support is used on 135, 135UK below serial number 439191, 150, 165, 165UK below serial number 132849, 175, 175UK, 178, 230 with Lift Cover 884612M92, 235 with Lift Cover 1861320M1, 255 with Lift Cover 1861320M1, 285, up to aerial number 9A349239, Industrial 20 with Lift Cover 1861320M1, 20C with Lift Cover 884612M92, 30 except those with Lift Cover 1870955M1, 31, 40 except those with Lift Cover 1870955M1, 2135, 3165. Replaces ORM part numbers 1884238M1, 1884283M1, 898197M1, 908553M2 (Item #: 173709, Ref: 1884238M1) $35.40

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Standpipe, Hydraulic - Used on models with pressure control, 12.5 inches long. For tractor models 150, 175, 180, 235, 245, 30, 31, (175, 178 serial number up to 709936), (135 serial number up to 79481), (165 serial number up to 520708), (185 serial number up to 320843). (Item #: 173347, Ref: 883788M91) $28.60

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Item #: 124227, Ref: 898229M1) $21.60

Lights

Headlight - Used with fender part numbers 530967M92 and 530966M92. For tractor models 235, 245, 255, 265, 275, 285, 30, 31. Also replaces OEM numbers 7027185 and D4NN13002C. (Item #: 105301, Ref: 164089AS) $29.00

Headlight Washer - Used with light part number 164089AS. For the following tractors: TO20, TE20, TO30, TO35, 35, 40, 50, 65, 85, 135, TEA20-85, 150, 165, 175, 180, 770, 88, 90, Super 90, 97, 1080, 1085, 202, 1100, 1105, 203, 1130, 204, 235, 245, 255, 265, 275, 285, 30, 31 (Item #: 154899, Ref: 504781M1) $5.30

$Massey Ferguson 31 Headlight \ Work Light Ring, Rubber$
Headlight / Work Light Ring, Rubber - 6 inch outside diameter. For tractor models 20, 2135, 30, 30B, 30D, 31, 3165, 50A, 50C, 60, 1080, 1085, 1100, 1105, 1130, 1135, 1150, 1155, 135, 1505. (Item #: 164079, Ref: 1026697M1) $11.20

Light Switch With Knob - Light Switch with knob 509309M1. 5 Terminal. For tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF250, to serial number 2773N01000, MF255, MF265, MF270, MF275, MF285, MF288 except Brazil, MF290, MF298, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150. Replaces 772954M1, 522812M1, 522813M1, 509309M1 (Item #: 111508, Ref: 772954M1) $28.22

Miscellaneous

Mounting Plate for Auxiliary Hydraulic Pump - For Massey Ferguson tractor models 30, 31, 135, 150, 165, 175, 230, 235, 240, 243, 245, 250, 253, 255, 265, 270, 275, 283, 290, 451, 471, 491, 2640, Replaces Massey Ferguson OEM number 4200134M91, 1868970M91, Replaces Landini OEM number 1868970M91, 21 Spline, For 10 Spline Mounting Plate use Item #: 165541, (Item #: 165542) $543.00

No
Picture
Roller - For Massey Ferguson tractor models 20, 30, 31, 40, 135 (Without Pressure Control), 150 (Without Pressure Control), 165 (Without Pressure Control), 175 (Without Pressure Control), 180 (Without Pressure Control), 205, 230 (s/n 9A349239-earlier), 230 (s/n 9A349239-later), 231, 231S, 235, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240 (s/n A20286-later), 240P, 241, 245 (s/n 9A349239-earlier), 245 (s/n 9A349239-later), 250, 253, 255, 261, 263, 265, 265 (s/n 9A349239-later), 270, 271, 275 (s/n 9A349239-earlier), 275 (s/n 9A349239-later), 281, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier), 375 (s/n B18009-earlier), 383, 390 (s/n B18008-earlier), 390 (s/n B18009-earlier), 390T (s/n B18009-earlier), 393, 396, 398 (s/n B18008-earlier), 398 (s/n B18009-earlier), 399 (With A6-354.4 Engine), 399 (With 1006.6 Engine), 451, 471, 481, 670, 690, 698, 699, 2135, 2200, 3165, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 898189M2, (Item #: 165561) $0.50

Oil System

Oil Filler Plug - Rubber measures 1 7/16 inches in diameter. For tractor models with Perkins Engines: 1080, 1085, 135, 150, 165, 175, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 2500, 255, 265, 275, 285, 298, 30, 30B, 30D, 31, 3165, 40, 4500, 50, 50A, 50C, 50D, 6500, 698, 70. Replaces 2487863. (Item #: 125397, Ref: 897105M1) $15.50

Oil Pickup Strainer - Used on Perkins A4.212, A4.236 and A4.248 engines, this part replaces; Massey Ferguson part number 734839M91, Perkins part number 37725443. (Item #: 179650, Ref: 734839M91) $25.20

Oil Pressure Switch - Oil pressure switch located directly behind the oil pressure gauge, uses blade type wire terminal. For Perkins diesel engines in tractors: MF135, MF150, MF165, MF175, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 SN# 9A349239 and up, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF11 For 203, 205, 20C, 20, 2135, 302, 304, 30B, 30D, 30, 3165, 31, 40B, 40, 50A, 50C, 50D, 50, MF1080, MF1085, MF1100, MF1105, MF1130, MF1135, MF1150, MF1155, MF135, MF1505, MF150, MF165, MF175, MF1805, MF180, MF230, MF235, MF245, MF255, MF265, MF275, MF285 (Item #: 121161, Ref: 509682M91) $14.40

Oil Pump for 4 Bolt Balancer - This Oil Pump is used inside a 4 bolt balancer on Perkins Engines. Used on Massey Ferguson: 175, 180, 255, 265, 261, 270, 31, 50C, 50D, 50E, 50F, 60, (6500 AD4.236 Direct injection), 275, 283, 290, 690, 50H, 60H, 294, 383, 390, 394, 3050, 3060, 50E. Replaces 743194M1, 734850M1, 743020M1, 736510M1, 743206M91. (Item #: 179580, Ref: 743194M1) $96.00

PTO / Driveline

Bearing - Bearing, outer, for PTO Output Shaft (inside diameter 1.771 inch X outside diameter 2.952 inch x .629 inch thick) For tractors: TO30, TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175 late production, MF235 For tractors with dry brakes: MF255, MF265 to serial number 9A349239, MF275 to serial number 9A349239. For tractors using snap rings on bearing. (Item #: 172368, Ref: 195498M1) $34.30

Bearing - Bearing, for PTO front drive shaft housing, 2.8120 inch outside diameter determine bearing outside diameter before ordering. For 6 and 8 speed and multi-power transmissions. Replaces 899377M1, 3760514M1, 899377M2 (Item #: 176234, Ref: 899377M2) $22.20

Clutch Housing, Independent PTO - For tractor models 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 1080, 1085, 20C, 30, 31, 40B, 50C, 50D. Replaces 515875M91 (Item #: 111327, Ref: 515875M92) $413.00

IPTO Clutch Kit - For Massey Ferguson tractor models 31, 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 1080, 1085, Replaces Massey Ferguson OEM number 1672626M1, 772813M1, 185425M1, 510710M1, 514551M1, 772821M1, 844450M1, Includes: (7) Friction Discs, (7) Separator Plates, (11) Needle Rollers, (11) Return Springs, (2) Piston Rings, (2) Sealing Rings, (Item #: 168777) $430.00

No
Picture
Output Shaft, PTO Seal - A PTO output shaft outer oil seal measures 2.323 inches inside diameter, 3.150 inches inside diameter and is .394 inches wide. For tractors: MF230 axle serial number FD101, CD8028 and up, MF231, MF235 live PTO with axle serial number FD101 and up, MF240, MF245, MF250, MF253, MF255 with wet brakes, MF265 with wet brakes, MF270, MF275, MF282, MF285, MF290, MF298, MF360 to serial number P38370, MFD375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085, MF3050, MF3060, MF3070, MF3090 industrials: 20 with axle serial number FD101, CD8028 and up, 20C, 20D, 30 with wet brakes, 30B, 30D, 30E, 31 with axle serial number FD101 and CD8028 and up, 40 with wet brakes, 40B, 40E, 50C, 50D, 50E. For 750, 760, 850, 860. Verify measurements to make sure you are ordering the correct seal. (Item #: 107013, Ref: 834216M1) $8.40

PTO Cap - For tractor models 230, 235, 240, 243, 245, 250, 253, 255, 260, 263, 265, 270, 275, 283, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 670, 690, 20, 20C, 20D, 20E, 20F, 30, 30B, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 50H, 50HX, 60H. (Item #: 119997, Ref: 532888M1) $11.80

PTO Disc - 5.039 inch outside diameter, 3.457 inch inside diameter, 57 internal teeth. For tractor models FE35, 20C, 30, 30E, 31, 35, 40B, 40E, 50, 50C, 50D, 50E, 65, 85, 88, 90, 135, 150, 165, 175, 180, 235, 265, 270, 275, 285, 290, 298, 360, 362, 375, 383, 390, 393, 398, 670, 690, 698, 699, 1080, 1085, 1155, 4800, 4840. Replaces 190177M1, 533326M2, 1870879M1. (Item #: 114029, Ref: 1672626M1) $10.80

PTO Gear - This is first gear for the PTO. For tractor models 135, 148, 150, 168, 185, 188, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590, 165 STANDARD TRANSMSSION/MULTI-POWER SERIAL NUMBER 130774->. For 8 speed transmission, 53 teeth, 21 splines. (Item #: 166907, Ref: 1868532M1) $76.00

PTO Gear - For tractor models 135, 150, 155, 158, 175, 180, 20, 202, 203, 240, 2200, 30, 31, 3165, 550, FE135 COVENTRY, 165 STANDARD/MULTI-POWER serial number <-130773, 2135, TURF UTILITY NARROW. This PTO gear is a constant mesh gear with 53 spur teeth and 15 splines. Replaces 899329M1 and 1867820M1. (Item #: 153626, Ref: 1867820M1) $98.00

PTO Gear, Constant Mesh - This Constant Mesh Gear has 53 Teeth and 15 Splines. Used on Massey Ferguson 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 30, 31, 40, 40B, 50C, 50D, 50E, 565, 575, 590. It replaces part number 899329M1 (Item #: 153626, Ref: 899329M1) $98.00

PTO Gear, Used - For Massey Ferguson tractor models 30, 31, 40, 135, 150, 165, 175, 178, 230, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 565, 575, 590, Compatible with Massey Ferguson Construction and industrial models 20, 30, 31, 40, 50, 50C, 202, 203, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 899329M1, Splines: 15, Teeth: 53, For a new version of this item use Item #: 153626, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460709) $82.01

PTO Seal - For 135, 150, 165, 175, 180, 20, 20C, 230, 235, 245, 30I, 31, 35, 50, 65, TO35. PTO Drive Shaft Seal. Measures 1.75 x 2.25 x.25 inches. (Item #: 152783, Ref: 195503M1) $3.90

PTO Seal Retainer Housing - This Seal Retainer Housing is used on many Massey Ferguson tractors. Uses 195522M1 o-ring, not included. Replaces part numbers 180465M1, 180465V1 (Item #: 151850, Ref: 180465M1) $22.80

PTO Seal Shield - This PTO Seal Shield is used on many Massey models with single speed PTO, including; (165UK Engine Serial number 144682 and up), (230 Rear Axle Serial Number FD101, CD8020 and up), 231, 231S, (235 Transmission Serial Number FD101 and up), 240 up to Engine Serial Number P38370), 245, 250, (253 up to Engine Serial P38370), (255 Wet Brakes), 282, 283, )283 Brazil up to Serial Number 2915), 290, (360, 375, 383, 390, 390T up to Engine Serial Number P38370), 670, 690, 698, 699, (20 Rear Axle Serial Number FD101, CD8028 and up), 20C, 20D, 20E, (20F up to Serial Number 5101D0782), (30 Wet Brakes), 30B, 30D, 30E, (31 Rear Axle Serial Number FD101, CD8020 and up), (40 Wet Brakes), 40B, 40E, 50C, 50D, 50E. Replaces 533183M1. Verify Part Number before ordering. (Item #: 179732, Ref: 533183M1) $3.70

PTO Shaft - For tractor models 20, 20B, 20C, 20F, 282, 283, 30, 30D, 31, 390, 40, 40B, 40F, 50D, 50E, 50G, 240 LIVE, (245, 250, 270 ALL LIVE/IND PTO), (265, 275, ALL LIVE/IND PTO with WET BRAKE), 290 SINGLE SP PTO, 230 REAR AXLE serial number FD101/ CD 8028->LIVE, 235 serial number FD101->LIVE. This is a 540 RPM PTO Shaft, 24.125 inches long, 21 drive splines. (Item #: 156331, Ref: 1660288M91) $112.00

PTO Shaft - For 30 late production with dry brakes and Live PTO 165 UK serial number 130773-144682 with Live PTO, 135 UK serial number 439191 and up with Live PTO, 230 with rear axle serial number below FD101 or CD8028 with Live PTO, (255, 265, 275 all with dry brakes and Live PTO), 40 with dry brakes rear axle serial number below FD101 or CD8028 with Live PTO, (135, 150, 175, 20, 31 all with Live PTO), 165 with multi-power and standard transmission with Live PTO, 235 with rear axle serial number below FD101 with Live PTO. PTO Shaft 540 RPM, 24 1/32 inches long, 21 drive splines. (Item #: 166771, Ref: 1868557M93) $142.00

PTO Shaft - For 165 UK serial number below 130773 with independent PTO, 135 UK serial number below 439191 with independent PTO, (135, 150, 180, 30, 31 all with independent PTO) 165 with multi-power and standard transmission with independent PTO, 175 with multi-power and 8 speed transmission with independent PTO. PTO shaft 540 RPM, 22 3/4 inches Long, 21 drive splines. (Item #: 173056, Ref: 1867082M91) $156.00

PTO Shaft, 540 RPM - For F135, F35, F40, MH50, TO35, 135, 150, 165, 175, 180, 202, 203, 204, 205, 2135, 2200, 302, 304, 3165, 35, 50, 65 all with Live PTO, (20, 30, 31, 40, all Ind For Live PTO). PTO Shaft 540 RPM, 1 3/8 inch x 22.75 inches long, 10 drive splines, 1 snap ring groove. Replaces: 181204M92, 181204M91, 181204V92, 1812204M92, 1867084M91, M05-39-02. (Item #: 168169, Ref: 181204M92) $60.00

Rear Drive Shaft PTO - For FE135, 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 2500, 253, 255, 265, 30, 30B, 30E, 30H, 302, 304, 31, 3165, 356, 360, 362, 370, 40, 40B, 40E, 4500, 50, 50A, 50C, 50D, 50E, 6500, 690, 698. Rear Drive Shaft PTO. 8.75 inches long, 10/18 splines. Replaces 886548M1. (Item #: 886366M91) $178.34

Retaining Plate - Used to retain the PTO Seal Housings 532880M1 and 180465M1, this part replaces Massey Ferguson part numbers 1663254M1, 532887M2, 184365M3. Used on 1004, 1004T, 1200, 1250, 133, 135, 140, 145, 148, 152, 155, 158, 165, 168, 175, 178, 180, 185, 188, 20E, 20F, 230, 231, 235, 240, 243, 245, 250, 253, 255, 260, 261, 2625, 263, 2635, 265, 265S, 270, 275, 282, 283, 285, 285S, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 350, 352, 355, 360, 362, 365, 372, 375, 375E, 382, 390, 390E, 390T, 396, 398, 399, 40, 40B, 40E, 410, 420, 50, 50C, 50D, 50E, 50H, 560, 565, 575, 590, 60H, 65, 675, 690, 698, 698T, 699, 765. Many of the models listed had more than one PTO system, verify part number before ordering. (Item #: 179426, Ref: 532887M2) $21.30

Shaft Bushing, PTO - For 135, 135UK, 150, 165, 165UK, 175, 175UK, 180, 20, 202, 203, 2135, 2200, 230, 235, 2500, 255, 265, 275, 30, 302, 31, 3165, 35, 35FE, 35X, 40, 4500, 50, 65, 6500, TO35. PTO Shaft Bushing. (Item #: 173076, Ref: 180461M1) $11.90

Seats

Backrest - Formed backrest, black. Tractors: MF50 serial number 533414 and up, MF65 serial number 692932 and up, and MF150, MF165, MF175, MF180, all with serial number 9A136826 and up, MF255, MF265, MF275, MF285. Industrial: 31. Replaces 1032434M91. For 31, MF150, MF165, MF175, MF180, MF255, MF265, MF275, MF285, Industrial 31. (Item #: 101324, Ref: 1043314M92) $76.00

Bucket Style Metal Pan Seat - Color may vary. Size is approximately 19 inches wide x 13 inches deep x 9-1/2 inches high. Fits Models: TE20, TEA20, TO20, TO30, TO35, MF50, MH50, MF35, 50, 65, 85, 88, 98, 135, 150, 165, 230, 235, 240, 245, 250, 265, 283, 333, 444, 555, 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 40, 40B, 50, 50A, 50C, 200, 2135, 2200, 3165. Uses cushion number R1001 and number R1000. (Item #: 113263, Ref: 181313M93) $75.00

Seat Bracket - This seat bracket is used on the bucket style seat part number 181313M93 and is for tractor models: TEA20, TE20, TO20, TO30, TO35, 35, 50, 65, 85, 88, 98, 135, 150, 230, 235, 240, 245, 250, 265, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 35 Turf and Utility, 40, 40B, 40E, 50, 50A, 50C, 202, 203, 204, 205, 2135, 2200, 3165. Replaces original part number 181316M92. (Item #: 155779, Ref: 181316M92) $82.00

Seat Bumper, Rubber - Fits tractors with a Knoedler Float-a-Matic using metal bushings, 1.465 inches long, .635 inches thick. For tractor models (some 50), 65, 95, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 1080, Industrials MF20, MF20C, MF30, MF30B, MF30D, MF31, MF40B, MF50C, MF50D, 220 Skidder, 44 Windrower, 34 Swather, 36 Swather. (Item #: 179441, Ref: 1015879M1) $14.60

Seat Cushion, Black - Seat cushion, black. Tractors: MF50 serial number 533414 and up, MF65 serial number 692932 and up, MF150, MF165, MF175, MF180, all with serial number 9A136826 and up: MF255, MF265, MF275, MF285. Industrial: 31. Replaces 1032168M91, 1043315M91. For 31, MF150, MF165, MF175, MF180, MF255, MF265, MF275, MF285, MF50, MF65. (Item #: 101323, Ref: 1050547M92) $70.00

Seat Hinge and Pins - This is the hinge and pin found on bracket part number 181316M92. It is used for attaching bucket seat part number 181313M93. It includes 181322M1 hinge link, 181321M1 pin (3/8 inch x 6-7/8 inch) and 181320M1 pin (3/8 inch x 7-5/16 inch). (Item #: 182977, Ref: 181322M1) $48.70

Sheet Metal / Body Parts

Battery Door and Latch Assembly - For 150, 165, 175, 30, 31, 3165. Battery Door and Latch Assembly. Note, others on the market do not come with the latch. Also replaces 194783M2. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104141, Ref: 512548M91) $58.00

Flat Top Fender Bracket - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 30, 31. Flat Top Fender Bracket, Right or Left. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 112022, Ref: S.61847) $203.00

No
Picture
Flat Top Fender, Left - For tractor models 235, 245, 255, 265, 275, 285, 30, 31. Flat Top Fender - left. With hand hole. Does not come with bracket. This fender uses light part number 164089AS and light washer part number 504781M1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104159, Ref: 530967M92) $240.00

Flat Top Fender Light Housing - For 135, 150, 165, 175, 180, 235, 245, 255, 265, 275, 285, 30, 31 Fender Headlight Housing for Flat Top Fenders. 2 Headlight Holes. Fits Original 100 series or the replacements we sell with slight modification. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 179439, Ref: 506262M2) $57.00

No
Picture
Flat Top Fender, Right - For 235, 245, 255, 265, 275, 285, 30, 31. Flat Top Fender - right. With hand hole. Does not come with bracket. This fender uses light part number 164089AS and light washer part number 504781M1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104158, Ref: 530966M92) $245.00

Front Hood Nose Gasket - For Massey Ferguson tractor models 20, 30, 31, 135, 150, 165, 175, 180, 2135, 3165, Replaces Massey Ferguson OEM number 505475M2, 1668721M1, 194252M1, (Item #: 180365) $5.60

Grill Assembly - This assembly with door is 15 3/4 inches tall. Does NOT come with mounting hardware or door springs (not available). Also replaces 194181M91. ENSURE YOU VERIFY HEIGHT MEASUREMENT AS 3 DIFFERENT SIZES ARE AVAILABLE. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104153, Ref: 506319M93-2) $139.22

Grill Assembly - For tractor models 150, 165, 175, Ind 30, Ind 31, Ind 3165. Grill Assembly is 16 3/8 inches tall with door. Does NOT come with mounting hardware or door springs (not available). Also replaces 194181M91. ENSURE YOU VERIFY HEIGHT MEASUREMENT AS 3 DIFFERENT SIZES ARE AVAILABLE. (Item #: 104153, Ref: 506319M93) $139.22

Grill Door Front - Front grill door. 14 inches wide. For tractors: MF150, MF165, MF175 industrials: 30, 31, 3165. This door fits our 506319M93 Grill Assembly. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 107028, Ref: 194181M91) $60.00

No
Picture
Grille less Door - For Massey Ferguson tractor models 30, 31, 150, 165 (UK), 165, 175 (UK), 175, 178 (UK), Compatible with Massey Ferguson Construction and industrial models 3165, Replaces Massey Ferguson OEM number 506319M93, Door opening: 15.5" x 9.25", Comes primered (color may vary). Prior to painting check fitment, (Item #: 107027) $106.00

No
Picture
Grille Retainer Screw - For Massey Ferguson tractor models 20, 30, 31, 133, 135, 148, 158, 165, 168, 175, 178, 185, 188, 1080, 2135, 3165, Replaces Massey Ferguson OEM number 897819M1, Total Length: 29.5 mm, Useable Length: 22 mm, Shaft: 11 mm, (Item #: 172987) $7.20

Hood, Dash and Grill Rubber Bumper - 1/2 inch outside diameter X 7/16 inches tall. For tractor models 20C, 20D, 20F, 30B, 30E, 30H, 40B, 40E, 50A, 50C, 50D, 50E, Super 90, TE20, TO20, TO30, 30, 31, 60, 65, 85, 88, 135, 150, 165, 175, 180, 202, 203, 204, 205, 230, 231, 235, 240, 245, 250, 255, 265, 302, 303, 404, 1080, 1100, 1130, 1150, 2135, 2200, 2640, 2675, 2705, 2745, 2775, 2805, 3165, 3505, 3525, 3545, 4500, 6500, MF 20, MF 25, MF 35, F40, MF (Ag and Ind): 40, 50, TO35. Replaces: 194768M1. (Item #: 163112, Ref: 180673M1) $2.80

Nose Cap Assembly, Metal, Painted - With crossbar, emblem and screen. Fits 135, 150, 165, 175, 180, 2135, Industrial 20, 30, 31, 3165. Comes painted MF Red. Does not include gasket. (Item #: 104148, Ref: 508891M91) $200.00

Nose Cap-Metal - Nose cone, metal, less screen, bar and emblem. Nose cone comes primed and ready to paint. For tractors: 135, 150, 165, 175, 180 industrials: 20, 30, 31, 2135, 3165. Replaces plastic or early style cast metal nose cones. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 113506, Ref: 194200M92) $156.00

Nose Cone Screen - Screen, black painted steel, for metal or plastic nose cones. For tractors: MF135, MF150, MF165, MF175, MF180 industrials: 20, 30, 31, 2135, 3165. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 114037, Ref: 194236M2) $18.00

Side Panel - For 150, 165, 175, 30, 31, 3165. Side Panel. Right hand. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104142, Ref: 194840M1) $37.20

Side Panel - For 150, 165, 175, 30, 31, 3165. Side Panel. Left hand. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104143, Ref: 194841M1) $43.90

No
Picture
Side Panel, Left Hand - For Massey Ferguson tractor models 30, 31, 165, 175, 3165, Replaces Massey Ferguson OEM number 194942M91, Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 173718) $27.10

Steering

Axle Rear Center Pivot Bushing - 1.875 inch x 2.125 inch x 2.500 inch. For tractor models 165, 175, 245, 265, 275, 285, 30, 31, 3165. (Item #: 128540, Ref: 512980M1) $17.60

Bushing, Front Center Pivot - 1.875 inch x 2.062 inch x 1.125 inch. For tractor models 165, 174, 245, 255, 265, 275, 285, 30, 31, 3165. (Item #: 128539, Ref: 512979M1) $28.30

Differential Ring Gear Case Assembly - For Massey Ferguson tractor models 30, 31, 40, 50, 50A, 65, 135, 150, 175, 180, 205, 220, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 375, 390, 390T, 399, 670, 690, 698, 699, 1085, Replaces Massey Ferguson OEM number 882783M92, (Item #: 165984) $175.00

Front Axle Assembly with Pivot Bushing - For tractor models 165, 175, 255, 265, 275, 3165, 30, 31. (Item #: 167284, Ref: 512982M92) $461.00

Front Axle Support - 18-5/8 inches long, machined bottom surface. For tractor models (165 with M93 Arms), (165 with 203 engine needs adaptor block S.61771. Available separately), (175 serial number 644002123 to 9A105660), (255 serial number 9A246493 to 9A324146), (265 up to serial number 9A324139), (275 up to serial number 9A324137), (285 up to serial number 9A281393), (Ind. 30 gas), 31. Replaces 532741M93. Measure old casting before ordering. Arms shown to differentiate between the 2 types. *** Weight is approximately 210 pounds ***. Replaces 512046M94 532741M93 (Item #: 182676, Ref: 512046M94) $764.00

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Jam Nut - For tractor models 1100, 1105, 1130, 1135, 1150, 1155, 150, 165, 168, 175, 185, 188, 245, 255, 265, 275, 285, 290, 30, 31, (50 serial number 533423 and up), (65 serial number 692932 and up). (Item #: 105123, Ref: 192928M1) $8.40

Main Steering Arm - 43 spline. Spline Major Diameter: 1.850 inch, Minor Diameter: 1.770 inch. For 165, 175, 30, 31, 3165. Main Steering Arm. Replaces 534155M91 or 514281M91. Used with 523112M91 Center Steering Arm. (Item #: 102532, Ref: 534155M91) $71.00

Power Steering Cylinder Shaft and Piston - This Power Steering Cylinder Shaft and Piston is used on 165, 175, 3165, 30, 31. It replaces 1027231M91. Uses 9N675 rings, not included. (Item #: 179587, Ref: 1027231M91) $182.00

Power Steering Pump - Helical cut gear, 14 teeth, replaces Parker Hannifin. For tractors: 165 Perkins gas, 175, MF255 diesel, MF265 except with Hydrostatic Power Steering Pump, MF275; Industrials 30 gas, 31, 50C, 50D, 6500 Forklift. Replaces 505341M91, 518637M92, 523092M1 and 897146M94. (Item #: 112581, Ref: 523092M91) $245.00

Power Steering Seal Kit - For Parker Hannifin Model reference number D17X-01. Without rear plate. Repairs 523089M91, 523090M91, 523091M91, 523092M91 and 523093M91 Power Steering Pumps. Replaces PHPSKIT, PHPS-KIT, 1201-1621 for tractor models MF1080, MF1085, MF165, MF175, MF175, MF255, MF265, MF275, MF285, MF30, MF302, MF304, MF31, MF3165, MF40B, MF50, MF50A, MF50C, MF50D and MF65. (Item #: 113671, Ref: PSP-KIT2) $32.90

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

$Massey Ferguson 31 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For Massey Ferguson tractor models 30, 31, Compatible with Massey Ferguson Construction and industrial models 3165, Replaces Massey Ferguson OEM number 514572M92, Dimension A: 9.375", Dimension B: 1.500", Dimension C: 1.796", Dimension D: 1.250", Right or Left Side, (Item #: 104984) $225.00

Steering Arm, Center - 43 splines, 11.187 inch long shaft, 1.686 inch and 1.873 inch diameter. For tractor models 165, 175, 30, 31, 3165. (Item #: 102530, Ref: 523112M91) $375.00

Steering Arm, LH - For tractor models 165, 175, 255, 265, 285, 30, 31, 3165. (Item #: 102529, Ref: 194570M1) $38.80

Steering Arm, RH - For tractor models 165, 175, 255, 265, 285, 30, 31, 3165. (Item #: 102528, Ref: 194569M1) $37.10

Steering Arm - Right Hand, Used - For Massey Ferguson tractor models 30, 31, 165, 175, 255, 265, 285, Compatible with Massey Ferguson Construction and industrial models 3165, Replaces Massey Ferguson OEM number 194569M1, Right Hand, For a new version of this item use Item #: 102528, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 446999) $19.51

Steering Arm, Upper - This Upper Steering Arm is for tractor models 165, 175, 30, 31, 3165 all with 523112M91 center steering shaft. The large hole is 1.687 inches, small hole is .312 inches. Tapered tie rod hole is .656 to .775 inches. (Item #: 102531, Ref: 514285M1) $107.00

Steering Arm, Used - For Massey Ferguson tractor models 30, 31, 165, 175, Compatible with Massey Ferguson Construction and industrial models 3165, Replaces Massey Ferguson OEM number 514285M1, Use with 523112M91 Steering Shaft, For a new version of this item use Item #: 102531, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447006) $62.01

Steering Shaft - For tractor models 165, 175, 30, 31, 3165. (Item #: 182832, Ref: 1026257M91) $92.00

Steering Shaft - For Massey Ferguson tractor models 30, 31, 135, 150, 165, 175 (All UK), 178, 230, 235, 240, 245 (s/n 9A349239 - earlier), 255, 265, 285, 2135, Compatible with Massey Ferguson Combine (s) 40, Compatible with Massey Ferguson Construction and industrial models 20, 40, 200, 3165, Compatible with Massey Ferguson Hay Cutting (s) 200, Replaces Massey Ferguson OEM number 899277M91, Steering Shaft, Draft Control, (Item #: 105176) $39.00

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to serial number 6585483), (575 up to serial number 270719), (590 up to serial number 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1. (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod Assembly, LH - For tractor models 165, 168, 175, 185, 188, 255, 265, 275, 285, 290, (30, 31 Industrials). (Item #: 105121, Ref: 553325) $77.00

Tie Rod Assembly, RH - For tractor models 165, 168, 175, 178, 255, 265, 275, 285, 290, (30, 31 Industrials). One end is notched, other end is welded. Replaces Massey Ferguson OEM nos 1028262M91, 1028264M91, 553326. (Item #: 102506, Ref: 553326) $57.00

Tie Rod Assembly - Right Hand - For Massey Ferguson tractor models 30, 31, 175, Compatible with Massey Ferguson Construction and industrial models 30, 3165, Replaces Massey Ferguson OEM number 507436M91, Dimension A: 23.125", Dimension B: 1.000", Fits Right Hand Side, (Item #: 105127) $152.00

Tie Rod End - Tie rod end, left hand, inner. 4.812 inches to center of post, 1 inch outside diameter, female. For adjustable front axle on tractors: MF165 except LP, MF175, MF255, MF265, MF275 Industrials: 30, 31, 3165 Turf. For 30, 3165, 31, MF165, MF175, MF255, MF265, MF275. Replaces 1028098M1, 1028098M91, 1028098M92. (Item #: 102511, Ref: 1028098M1) $20.30

Tie Rod End, Outer - Left Hand - For Massey Ferguson tractor models 30, 31, 175, Compatible with Massey Ferguson Construction and industrial models 30, 3165, Replaces Massey Ferguson OEM number 1028514M91, Fits Left Hand Side, Dimension A: 16.875", Dimension B: 4.750", 16 UN RH Thread, (Item #: 105126) $72.00

Wheels

Lug Nut, Rear Wheel - 5/8-18 (UNF) Thread. Uses a 1 1/16 inch wrench. Replaces C5NN1120F, 8N1134, 881162M2. (Item #: 109991, Ref: 8N1134) $2.22

Rear Wheel Bolt - This Rear Wheel Bolt is used from rear axle to center disc. 5/8 inch-18 thread (UNF) x 2-3/16 inch. Use with nut 8N1134. Used on 135, 150, 152, 158, 165, 175, 180, 20E, 20F, 235, 240, 245, 250, 255, 261, 265, 275, 282, 290 Brazilian, 290 US Built, 30, 30B, 30D, 31, 40, 40B, 50C, 50D, 60, 65, 765. Verify measurements and part numbers before ordering. Replaces C5NN1117D, C5NN1117K, C5NN1117R, VPH6506, VPH6534, 184272M1, 81815835, 893017M1, 98A625 (Item #: 108655, Ref: C5NN1117R) $2.60

Stop Body Screw, Single - This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 1751403M1. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Item #: 155118, Ref: C0NN1058A) $6.60

Wheel Hub - For tractor models 175, 202, 203, 204, 205, 220, 30, 31, 3165, 40. Uses WBKMF3 wheel bearing kit, not included. (Item #: 160890, Ref: 519276M91) $189.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $97.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Ferguson 31 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 31 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Massey Ferguson 31 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 31 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Massey Ferguson 31 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Massey Ferguson 31 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Massey Ferguson 31 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Massey Ferguson 31 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.17

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.62

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $102.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $430.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $22.10

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $5.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $132.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $140.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00