FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 4600SU Parts

Category: Clutch

[Categories] [All 4600SU Parts] [All Ford Models]

Clutch Alignment Tool - For a Double Clutch. The Large Spline is 1-7/8 inches with 29 Splines. The Small Spline 1 inch with 15 Splines. Pilot Diameter is 0.670 inches. This can also be used for 15 spline single clutches that match pilot and 1 inch by 15 spines. (Item #: 122258, Ref: AG15) $25.00

Clutch Disc, 13 Inch - Clutch Disc, 13 inch, 10-spline, 1 inch Hub, no Damper Springs. For 2810, 2910, 335, 3550, 3910, 4110, 420, 4400, 4410, 4500, 4600, 4610, 515, 532, 535. Replaces D1NN7550B, E3NN7550BA, VPG2204, 333008810, 3554214, 81825076, 82006015, 83937180, 1112-6025, 81866447, 87295809. (Item #: 149792, Ref: F0NN7550BA) $98.00

No
Picture
Clutch Disc, Woven NC - For Ford tractor models 4600, 4600SU, 5100, 5190, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 82006021, 86640489, 86640490, (Item #: 166238) $40.30

Clutch Kit - This single stage clutch kit contains a 11 inch, 10 spline rigid drive clutch disc (87295808), a 11 inch single pressure plate with six bolt mount, (used 1969 and later) (C9NN7563D), a pilot bearing which measures 1.575 inches OD, .669 inch ID, .472 inches wide (C5NN7600A), new release bearing which measures 4.0700 inches outside diameter, 2.4997 inches inside diameter, 0.8700 inches wide (83914247), and clutch alignment tool. **NOTE** Some tractors use a release bearing which measures 2.0625 inches inside diameter, 3.515 inches outside diameter and .840 inches in width. If you need this smaller bearing, also order part number N1087. For tractor models 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 345C, 345D, 3600, 3600V, 3610, 3900, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 445C, 445D, 4500, 4600, 4600SU, 4610, 5000, 5190, 530A, 5340, 545C, 545D. (Item #: 183011, Ref: D0NN7563A-KIT) $241.00

Clutch Kit - This new single stage clutch kit contains a new 13 inch pressure plate assembly with a 2.5 inch hub (D8NN7563AB), a new 13 inch, 25 spline, 1.625 inch hub, rigid drive disc (D2NN7550A), new release bearing (83914247), new pilot bearing (F0NNN779AA), and a clutch alignment tool. Fits Tractors 4600, 4600NO, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6600C, 6610, 6610S, 6700, 6810S, 7000, 7010, 7100, 7200, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, 9610. (Item #: 112323, Ref: FD13P25RD) $275.00

Clutch Kit - This new IPTO clutch kit contains a new 11 inch, 15 spline rigid drive disc (E8NN7550BA), a new 11 inch, 29 spline IPTO pressure plate assembly (C5NN7563U), a new pilot bearing (C5NN7600A), new release bearing (83914247), and clutch alignment tool. For tractors 4000 Series 3 Cyl 65-74, 4100, 4140, 4200, 4600, 4600SU. (Item #: 119876, Ref: C5NN7563UKIT15) $299.00

Clutch Kit - Single - This new complete clutch kit (for flat flywheel step) contains: a 13 inch single pressure plate, with ring (D8NN7563AB), 13 inch 10 spline rigid 1.75 inch hub disc (82011593), a pilot bearing that measures 1.437 inch inside diameter, 2.6772 inch outside diameter, .59 inch wide (F0NNN779AA), a release bearing that measures 2.5 inch inside diameter, 4.125 inch outside diameter, .870 inch wide (83914247), and clutch alignment tool. For tractor models: 4600, 4600SU, 5000, 5110, 5190, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6610, 6610S, 6700, 6710, 6810, 6810S, 7000, 7010, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210. (Item #: 112322, Ref: D8NN7563AB-KIT) $320.00

Clutch Kit, 10 SPLINE DISC - This new complete clutch kit includes: a 12 inch, 10 spline, with 1.75 inch hub, rigid clutch disc (E7NN7550DA), a 12 inch, 4 finger pressure plate (86634458), a sealed type release bearing that measures 2.49 inch inside diameter, 4.06 inch outside diameter, .87 inch width (83914247), a pilot bearing that measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width (F0NNN779AA) and clutch alignment tool. For models: 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Item #: 112319, Ref: E0NN7550DA) $246.00

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch 10 spline four pad ceramic disc. (Note, this replaces a three pad triangular type drive disc) C7NN7550AC, 11 inch 29 spline IPTO hub pressure plate with four finger design that will also replace three finger type with six (6) bolt mounting design D8NN7563DB, release bearing 83914247, pilot bearing C5NN7600A, and 1 inch by 10 spline and 1-7/8 inch by 29 spline pilot tool. (Item #: 192660, Ref: 1112-6113) $300.00

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch - 10 spline rigid drive disc with 1 inch center (82006626), 11 inch - 29 spline IPTO pressure plate (C5NN7563U) with 8 bolt mount pattern, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Replaces 82006626, C5NN7563U, E5NN7550BB. (Item #: 119880, Ref: 1112-6067) $300.00

Clutch Kit, 11 Single - This Clutch Kit contains 11 inch 15 spline spring drive disc E8NN7550AA, 11 inch single pressure plate C9NN7563D, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Used on some Ford tractors 1965 and later. (Item #: 119878, Ref: FC563ZNKIT) $339.00

Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3/4 inch hub 82011593, 13 inch single pressure plate w/ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB (Item #: 112322, Ref: 11126087) $320.00

Clutch Kit, 25 SPLINE DISC - This new complete clutch kit includes: a new 12 inch, 4 finger pressure plate (86634458). A 12 inch, 25 spline, 1 5/8 inch hub rigid disc (C7NN7550Z). A new release bearing which measures 2.49 inch inside diameter, 4.06 inch outside diameter, .82 inch width (83914247), pilot bearing measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width (F0NNN779AA) and clutch alignment tool. For tractor models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Item #: 112321, Ref: E0NN7563CA-KITA) $293.00

Clutch Kit, 25 SPLINE DISC - Complete Kit is the same description as E0NN7563CA-KITA except Disc has springs not rigid. Disc, 12 inch, 25 spline SPRING disc, 1 5/8 inch hub, pressure plate is 4 finger, release bearing measures 2.49 inch inside diameter, 4.06 inch outside diameter, .82 inch width, pilot bearing measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width and alignment tool. For tractor models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Item #: 112320, Ref: E7NN7550DA-KIT) $250.00

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford/ New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Item #: 153432, Ref: C7NN7N598A) $5.30

Clutch Plate - Pressure Plate Assembly, 11 inch. 1.875 inch 29 spline center. Replaces D8NN7563DA, C9NN7563F, C7NN7563J. (Item #: 135020, Ref: D8NN7563DB) $177.00

No
Picture
Clutch Plate - For Ford tractor models 4600, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7700, Replaces Ford OEM number E0NN7563CA, 83925716, (Item #: 166027) $153.00

Clutch Release Throw Out Bearing - Greaseable - Compatible with Ford Tractor(s) NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2300, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 4000, 4100, 4110, 4410, 4600, 4600SU I.D.: 2.0625" O.D.: 3.562" Thickness: .812" Replaces Ford OEM nos C7NN7580A, C0NN7580A, E1ADKN7580B (Item #: 113482) $18.10

Clutch Set, LuK XX - For Ford tractor models 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-12/81), 5000 (1/65-1/75), 5100 (1/65-12/74), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (5/85-12/93), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7700 (1/75-12/80), Replaces Ford OEM number E0NN7563CA, E7NN7550DA, Set includes: E0NN7563CA 12" plate assembly, E7NN7550DA 12" disc, Spline: 10, Shaft: 1-3/4", For Just Pressure Plate use Item #: 122242, (Item #: 166183) $338.00

PTO Clutch Disc - PTO Disc 8-1/2 inch, 29-Spline, 1-7/8 inch hub. For tractor models (2000, 2100, 2110, 2120, 2150, 2310 3 cylinder dual clutch), (2300 vineyard), (230A, 231, 233, 234, 333, 531 dual clutch), (2310, 2600, 2600N, 2610 1981-12/1984 3 cylinder dual clutch), (3000, 3100, 3400, 4000, 4110 1965-12/1974 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330, 1/1965-12/1974), (335 utility 10/1975-9/1978), 3500, 3550, (3600 10/1975 and up), 3600N Narrow, (3610 10/1981-12/1984), 3910, 4600, 4600O, 4600SU, 530A. (Item #: 169901, Ref: C5NN77641B) $63.00

Pilot Bearing - For tractor models 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate - Pressure Plate Assembly, 11 inch. For models: 4000, 4100, 4140, 4200, 4600SU, 4600. (Item #: 130115, Ref: C5NN7563U) $157.00

Pressure Plate, 11 inch, Remanufactured - SEE PART NUMBER C5NN7563U FOR NEW PRESSURE PLATE. 11 inch single pressure plate, spline diameter 1.875 inches, 29 splines, with PTO hub (flat fly wheel). For tractor models 2000 3 CYL. INDEP. PTO, 2000 INDEP. PTO, 2100 3 CYL. INDEP. PTO, 2100 INDEP. PTO, 2110 3 CYL., INDEP. PTO, 2110 INDEP. PTO, 4000 65-9/69, 3 CYL. INDEP. PTO, 4100 10/71-10/80 INDEP. PTO, 4100 65-9/69 INDEP. PTO, 4140 UTILITY SPECIAL 1/65-12/74; 10/69-9/71, INDEP. PTO, 4200 65-9/69 INDEP. PTO, 4600 10/75-10/80 INDEP. PTO, 4600SU 10/75-10/80, INDEP. PTO. (Item #: 206224, Ref: C5NN7563U-RP) $217.00

Release Bearing - This clutch release bearing has an inside diameter of 2.4997 inches, an outside diameter of 4.0700 inches, and is 0.8700 inches wide. This release bearing is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Item #: 112189, Ref: N1585) $23.20

Universal Parts and Accessories
Category: Clutch

Tractor Splitting Stand Heavy Duty - HEAVY DUTY - Tractor Splitter for servicing higher horse power tractors safely. Max supported weight 20, 000 per jack stand. Minimum Height: 19.6 inches (23.6 inches with extension). Maximum Height: 29.1 inches (33 inches with extension). Rail Length 156 inches, Width 23.6 inches. Safety locking bolts on each jack stand. CE Certified. This item ships truck freight. Please call to order. (Item #: 133346, Ref: 150442) $2039.01

Tractor Splitting Stand Kit with Rails - This Tractor Splitting Kit is constructed with two splitting jack stands which are manufactured with a set of metal wheels to ride on the steel rails. The kit is designed to assist with the process of splitting tractors effortlessly, efficiently, and safely while performing tractor repairs, maintenance, and inspections. Features: 118 inch slide rail for the movement of jacks stands, 2 jacks stands and support fixings, 1 support handle to assist the adjustment, 2 height extensions enabling the height to be increased by 4 inches, Gross Weight approximately 176 lbs., Maximum Supported weight 10, 000 lb. per jack stand, Minimum Height: 14.5 inches / 18.5 inches (with extension), Maximum Height: 23.75 inches / 27.75 inches (with extension). This item ships truck freight. Please call to order. (Item #: 165543, Ref: 119888) $1084.94

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories] [All 4600SU Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy