FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford 4600SU Tractor Parts

[Categories] [All Ford Models] [Print]

Brakes

Brake Disc - Used in late production, this disc has a 1-9/32 wide facing. This disc is 8.070 inches outside diameter, 2.086 inches inside diameter with 22 splines. Replaces Ford part numbers 86529646, E9NN2N097AA, 83983209, E9NN2A097AA (Item #: 105497, Ref: E9NN2A097AA) $30.90

Clutch

Clutch Alignment Tool - For a Double Clutch. The Large Spline is 1-7/8 inches with 29 Splines. The Small Spline 1 inch with 15 Splines. Pilot Diameter is 0.670 inches. This can also be used for 15 spline single clutches that match pilot and 1 inch by 15 spines. (Item #: 122258, Ref: AG15) $25.00

Clutch Disc, 13 Inch - Clutch Disc, 13 inch, 10-spline, 1 inch Hub, no Damper Springs. For 2810, 2910, 335, 3550, 3910, 4110, 420, 4400, 4410, 4500, 4600, 4610, 515, 532, 535. Replaces D1NN7550B, E3NN7550BA, VPG2204, 333008810, 3554214, 81825076, 82006015, 83937180, 1112-6025, 81866447, 87295809. (Item #: 149792, Ref: F0NN7550BA) $98.00

No
Picture
Clutch Disc, Woven NC - For Ford tractor models 4600, 4600SU, 5100, 5190, 5200, 5340, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Replaces Ford OEM number 82006021, 86640489, 86640490, (Item #: 166238) $40.30

Clutch Kit - This single stage clutch kit contains a 11 inch, 10 spline rigid drive clutch disc (87295808), a 11 inch single pressure plate with six bolt mount, (used 1969 and later) (C9NN7563D), a pilot bearing which measures 1.575 inches OD, .669 inch ID, .472 inches wide (C5NN7600A), new release bearing which measures 4.0700 inches outside diameter, 2.4997 inches inside diameter, 0.8700 inches wide (83914247), and clutch alignment tool. **NOTE** Some tractors use a release bearing which measures 2.0625 inches inside diameter, 3.515 inches outside diameter and .840 inches in width. If you need this smaller bearing, also order part number N1087. For tractor models 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 334, 335, 345C, 345D, 3600, 3600V, 3610, 3900, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 445C, 445D, 4500, 4600, 4600SU, 4610, 5000, 5190, 530A, 5340, 545C, 545D. (Item #: 183011, Ref: D0NN7563A-KIT) $241.00

Clutch Kit - This new single stage clutch kit contains a new 13 inch pressure plate assembly with a 2.5 inch hub (D8NN7563AB), a new 13 inch, 25 spline, 1.625 inch hub, rigid drive disc (D2NN7550A), new release bearing (83914247), new pilot bearing (F0NNN779AA), and a clutch alignment tool. Fits Tractors 4600, 4600NO, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6600C, 6610, 6610S, 6700, 6810S, 7000, 7010, 7100, 7200, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, 9610. (Item #: 112323, Ref: FD13P25RD) $270.00

Clutch Kit - This new IPTO clutch kit contains a new 11 inch, 15 spline rigid drive disc (E8NN7550BA), a new 11 inch, 29 spline IPTO pressure plate assembly (C5NN7563U), a new pilot bearing (C5NN7600A), new release bearing (83914247), and clutch alignment tool. For tractors 4000 Series 3 Cyl 65-74, 4100, 4140, 4200, 4600, 4600SU. (Item #: 119876, Ref: C5NN7563UKIT15) $299.00

Clutch Kit, 10 SPLINE DISC - This new complete clutch kit includes: a 12 inch, 10 spline, with 1.75 inch hub, rigid clutch disc (E7NN7550DA), a 12 inch, 4 finger pressure plate (86634458), a sealed type release bearing that measures 2.49 inch inside diameter, 4.06 inch outside diameter, .87 inch width (83914247), a pilot bearing that measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width (F0NNN779AA) and clutch alignment tool. For models: 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Item #: 112319, Ref: E0NN7550DA) $246.00

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch 10 spline four pad ceramic disc. (Note, this replaces a three pad triangular type drive disc) C7NN7550AC, 11 inch 29 spline IPTO hub pressure plate with four finger design that will also replace three finger type with six (6) bolt mounting design D8NN7563DB, release bearing 83914247, pilot bearing C5NN7600A, and 1 inch by 10 spline and 1-7/8 inch by 29 spline pilot tool. (Item #: 192660, Ref: 1112-6113) $300.00

Clutch Kit, 11 Inch IPTO - Kit contains 11 inch - 10 spline rigid drive disc with 1 inch center (82006626), 11 inch - 29 spline IPTO pressure plate (C5NN7563U) with 8 bolt mount pattern, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Replaces 82006626, C5NN7563U, E5NN7550BB. (Item #: 119880, Ref: 1112-6067) $300.00

Clutch Kit, 11 Single - This Clutch Kit contains 11 inch 15 spline spring drive disc E8NN7550AA, 11 inch single pressure plate C9NN7563D, pilot bearing C5NN7600A and release bearing 83914247, includes pilot tool. Used on some Ford tractors 1965 and later. (Item #: 119878, Ref: FC563ZNKIT) $339.00

Clutch Kit, 13 Inch Single - This Kit contains 13 inch - 10 spline spring drive disc with 1 3/4 inch hub 82011593, 13 inch single pressure plate w/ring D8NN7563AB, pilot bearing F0NNN779AA and release bearing 83914247, includes pilot tool. Replaces 82006046, 82011593, D8NN7563AB (Item #: 112322, Ref: 11126087) $330.00

Clutch Kit, 25 SPLINE DISC - This new complete clutch kit includes: a new 12 inch, 4 finger pressure plate (86634458). A 12 inch, 25 spline, 1 5/8 inch hub rigid disc (C7NN7550Z). A new release bearing which measures 2.49 inch inside diameter, 4.06 inch outside diameter, .82 inch width (83914247), pilot bearing measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width (F0NNN779AA) and clutch alignment tool. For tractor models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Item #: 112321, Ref: E0NN7563CA-KITA) $285.00

Clutch Kit, 25 SPLINE DISC - Complete Kit is the same description as E0NN7563CA-KITA except Disc has springs not rigid. Disc, 12 inch, 25 spline SPRING disc, 1 5/8 inch hub, pressure plate is 4 finger, release bearing measures 2.49 inch inside diameter, 4.06 inch outside diameter, .82 inch width, pilot bearing measures 1.43 inch inside diameter, 2.68 inch outside diameter, .59 inch width and alignment tool. For tractor models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Item #: 112320, Ref: E7NN7550DA-KIT) $250.00

Clutch Kit - Single - This new complete clutch kit (for flat flywheel step) contains: a 13 inch single pressure plate, with ring (D8NN7563AB), 13 inch 10 spline rigid 1.75 inch hub disc (82011593), a pilot bearing that measures 1.437 inch inside diameter, 2.6772 inch outside diameter, .59 inch wide (F0NNN779AA), a release bearing that measures 2.5 inch inside diameter, 4.125 inch outside diameter, .870 inch wide (83914247), and clutch alignment tool. For tractor models: 4600, 4600SU, 5000, 5110, 5190, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6610, 6610S, 6700, 6710, 6810, 6810S, 7000, 7010, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210. (Item #: 112322, Ref: D8NN7563AB-KIT) $330.00

Clutch Pedal Return Spring - This Clutch Pedal Return Spring is used on multiple Ford/ New Holland Tractors and Industrial Models, build 1965 and later. It replaces original part numbers C7NN7N598A and 81820895 (Item #: 153432, Ref: C7NN7N598A) $5.30

Clutch Plate - Pressure Plate Assembly, 11 inch. 1.875 inch 29 spline center. Replaces D8NN7563DA, C9NN7563F, C7NN7563J. (Item #: 135020, Ref: D8NN7563DB) $177.00

No
Picture
Clutch Plate - For Ford tractor models 4600, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7700, Replaces Ford OEM number E0NN7563CA, 83925716, (Item #: 166027) $153.00

Clutch Release Throw Out Bearing - Greaseable - Compatible with Ford Tractor(s) NAA, Super Dexta, 2N, 8N, 9N, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 761, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2100, 2110, 2120, 2300, 2600, 2610, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 4000, 4100, 4110, 4410, 4600, 4600SU I.D.: 2.0625" O.D.: 3.562" Thickness: .812" Replaces Ford OEM nos C7NN7580A, C0NN7580A, E1ADKN7580B (Item #: 113482) $18.10

Clutch Set, LuK XX - For Ford tractor models 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-12/81), 5000 (1/65-1/75), 5100 (1/65-12/74), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (5/85-12/93), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7700 (1/75-12/80), Replaces Ford OEM number E0NN7563CA, E7NN7550DA, Set includes: E0NN7563CA 12" plate assembly, E7NN7550DA 12" disc, Spline: 10, Shaft: 1-3/4", For Just Pressure Plate use Item #: 122242, (Item #: 166183) $338.00

Pilot Bearing - For tractor models 4110, 4120, 4121, 4130, 4131, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 4500, 455, 4600, 4600O, 4600SU, 4610, 4610O, 4610SU, 4630, 4830, 4830N, 501, 515, 530A, 531, 532, 535, 540, 540B, 541, 545, 545A, 550, 555, 555A, 620, 621, 630, 640, 641, 650, 651, 655, 655A, 6710, 740, 741, 820, 821, 840, 841, 850, 851, 941, 950, 951. (Item #: 107933, Ref: C5NN7600A) $3.40

Pressure Plate - Pressure Plate Assembly, 11 inch. For models: 4000, 4100, 4140, 4200, 4600SU, 4600. (Item #: 130115, Ref: C5NN7563U) $157.00

Pressure Plate, 11 inch, Remanufactured - SEE PART NUMBER C5NN7563U FOR NEW PRESSURE PLATE. 11 inch single pressure plate, spline diameter 1.875 inches, 29 splines, with PTO hub (flat fly wheel). For tractor models 2000 3 CYL. INDEP. PTO, 2000 INDEP. PTO, 2100 3 CYL. INDEP. PTO, 2100 INDEP. PTO, 2110 3 CYL., INDEP. PTO, 2110 INDEP. PTO, 4000 65-9/69, 3 CYL. INDEP. PTO, 4100 10/71-10/80 INDEP. PTO, 4100 65-9/69 INDEP. PTO, 4140 UTILITY SPECIAL 1/65-12/74; 10/69-9/71, INDEP. PTO, 4200 65-9/69 INDEP. PTO, 4600 10/75-10/80 INDEP. PTO, 4600SU 10/75-10/80, INDEP. PTO. (Item #: 206224, Ref: C5NN7563U-RP) $217.00

PTO Clutch Disc - PTO Disc 8-1/2 inch, 29-Spline, 1-7/8 inch hub. For tractor models (2000, 2100, 2110, 2120, 2150, 2310 3 cylinder dual clutch), (2300 vineyard), (230A, 231, 233, 234, 333, 531 dual clutch), (2310, 2600, 2600N, 2610 1981-12/1984 3 cylinder dual clutch), (3000, 3100, 3400, 4000, 4110 1965-12/1974 dual clutch), (3120, 3150, 3190, 3300, 3310, 3330, 1/1965-12/1974), (335 utility 10/1975-9/1978), 3500, 3550, (3600 10/1975 and up), 3600N Narrow, (3610 10/1981-12/1984), 3910, 4600, 4600O, 4600SU, 530A. (Item #: 169901, Ref: C5NN77641B) $63.00

Release Bearing - This clutch release bearing has an inside diameter of 2.4997 inches, an outside diameter of 4.0700 inches, and is 0.8700 inches wide. This release bearing is used in multiple Ford Tractors. Replaces original part numbers D8NN7580AA, D8NN7580BA, D8NN7580BB, E4NN7580AA, D8NN7580CA, C7NN7580A, 82010859, 83914247, 83933520, 83946908 and 86534551. (Item #: 112189, Ref: N1585) $23.20

Cooling System

No
Picture
Thermostat - 88°C / 192°F - For Ford tractor models 501 (1/57-12/62), 541 (1/59-12/64), 600 (1/57-12/57), 601 (1/57-12/62), 611 (1/59-12/64), 620 (1/54-12/64), 621 (1/58-12/64), 630 (1/55-12/57), 631 (1/58-12/64), 640 (1/55-12/57), 641 (1/58-12/64), 650 (1/56-12/57), 651 (1/58-12/64), 660 (1/59-12/63), 700 (Series), 2000, 2031 (1/60-12/62), 2100 (3/65-12/74), 2110 (3/65-12/74), 2111 (1/63-12/64), 2120 (3/65-12/74), 2120 (1/63-12/64), 2131 (1/63-12/64), 2150 (1/70-12/74), 2300 (1/65-12/74), 2310, 2600 (1/75-12/81), 2600 (N, 1/75-12/81), 2600 (R, 1/75-12/81), 2600 (V, 1/75-9/76), 2610, 2610 (V, 1/70-2/90), 2810 (1/83-2/90), 2910, 3000, 3055 (1/65-12/74), 3310, 3400, 3600, 3600 (N, 1/75-12/81), 3600 (O, 1/75-12/81), 3600 (V, 1/75-12/81), 3600 (R, 1/75-12/77), 3610, 3610 (V, 1/81-4/83), 3610 (NO, 8/81-4/83), 3900 (1/75-12/81), 3910 (H, 1/83-2/90), 3910 (N, 1/83-2/90), 3910 (5/83-2/90), 3910 (R, 1/81-12/84), 3910 (V, 12/83-2/90), 4000, 4000SU, 4030 (1/61-12/62), 4031 (1/60-12/62), 4100, 4110, 4110 (TR, 1/63-12/64), 4110 (N, 1/81-2/90), 4110 (V, 1/81-2/90), 4110 (N, 12/81-2/90), 4120 (1/63-12/64), 4121 (1/63-12/64), 4130 (3/63-12/64), 4131 (1/63-12/64), 4140 (1/63-12/64), 4190 (1/65-12/74), 4200, 4330 (1/65-12/74), 4340 (1/65-12/74), 4410, 4600, 4600 (NO, 10/75-12/81), 4600SU (1/75-12/81), 4610, 4610 (N, 1/81-2/90), 4610 (NO, 1/81-2/90), 4610 (O, 1/81-2/90), 5000, 5110, 5200, 5600, 5610, 5700, 5900 (5/85-12/93), 6410, 6600, 6610, 6610 (O, 1/81-10/91), 6700, 6710, 6810, 7000, 7200, 7410, 7610, 7610 (O, 10/81-12/91), 7700, 7710, 8000, 8200 (1/68-9/72), 8700, 9000, 9200 (1/69-9/72), 9600 (10/73-7/76), 9700, Compatible with Ford Construction and industrial models 230A (1/81-4/83), 231 (1/75-12/81), 233 (1/75-12/81), 234 (1/75-4/83), 333 (1/75-12/81), 334 (1/81-4/83), 335 (1/83-2/84), 420, 445, 515, 531 (1/75-12/81), 532, 535, 540, 545, 550, 3500, 3500 (1/65-12/74), 3550, 4500 (1/65-12/74), 7500, 8400 (1/71-12/72), Replaces Ford OEM number D8NN8575BA, D8NN8575BAWG, 83916916, 87712913, Fits Ford Construction and industrial models 2130 (3 cyl. 1/63-12/64), (Item #: 176475) $10.40

Water Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3230, 3300, 3310, 3330, 3400, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4200, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 4630, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 334, 335, 340, 340A, 340B, 345, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 3500, 3550, 4400, 4500, Replaces Ford OEM number D3NN8501A, 87800115, 81814205, 81838685, 83905629, 83914192, 83919542, 83926000, 83943914, 88NY8501AA, C5NE8501A, C5NN8501A, D8NN8501CA, D8NN8501UA, D8NN8501UB, D8NN8501UC, For models without heater plug or cab heater, With Single Pulley, Includes: pump to backplate gasket, backplate, backplate to block gasket, For pump with heater hole use Item #: 115341, (Item #: 140587) $81.00

Water Pump Gasket - Used on multiple Ford models built 1965 and later. Replaces original part numbers D6NN8507A, E5NN8507AA, E5NN8507AB, C5NE9513A. (Item #: 117437, Ref: E5NN8507AB) $0.90

Water Pump Gasket - This is the Water Pump to Pump Housing Gaskets used in Ford/New Holland equipment, 1965 and later. It replaces original part numbers 83959398, E6NN8513AA. (Item #: 117438, Ref: E6NN8513AA) $3.20

Water Pump with Backing Plate and Double Groove Pulley - For Ford tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5100, 5110, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 515, 530, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, 650, 655, 655A, 750, 755, 755A, 755B, 7500, Replaces Ford OEM number D3NN8501B, E6NN8501CA, E6NN8501CB, D8NN8501DA, D8NN8501TA, D8NN8501TB, D8NN8501TC, D8NN8501TD, D5NN8501F, D8NN8501TE, Replaces New Holland OEM number 83914193, 83919541, 83925999, 83909539, 81876233, 3943913, 81868797, 81865549, 83943913, Grooves: Double Groove, Mounts with 5/16" and 7/16" bolts, Includes: Back Housing, Mounting and Block Gasket, (Item #: 169000) $147.00

Decals and Emblems

No
Picture
Decal Set, Red and White - Set of 2 "SU" Decals. For tractor models 4000SU, 4600SU. (Item #: 102049, Ref: S.66826) $14.50

Drive Train

Countershaft Gear - Replacing Ford / New Holland part numbers 81804753, C5NN7113B, 81869991, this Transmission Countershaft Gear has 16 and 35 teeth. It is used on Ford models 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 260C, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 333, 3330, 334, 335, 340, 3400, 340A, 340B, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 4500, 455, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5100, 515, 5200, 530, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, 7000, 7100, 7200 (Item #: 172893, Ref: C5NN7113B) $306.00

Input Shaft - This Input Shaft is used on Step Up Step Down Transmissions. It is 9 inches in length. Used in the following tractors, 1965 and later: 2000, 3000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 3400, 3500. Replaces C5NN7015T. (Item #: 179307, Ref: C5NN7015T) $237.00

Main Shaft Connecting Coupling - For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Item #: 172715, Ref: E6NN7106AA) $73.00

Mainshaft Front Bearing - Measuring 30mm inside diameter, 72mm outside diameter, and 20.75mm wide, this bearing replaces OEM numbers D0NNN755B, 46805, 26800340. It is used on Ford models 2000, 2100, 2110, 2600, 2600N, 2600V, 2810, 2910, 3000, 3100, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3900, 3910, 3910N, 3910V, 4000, 4100, 4110, 4110N, 4110V, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 5000, 5100, 515, 5200, 532, 5340, 535, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700 (Item #: 182968, Ref: D0NNN755B) $23.60

PTO Input Housing Gasket - Used on many Ford / New Holland tractors, 1965 and later. It replaces OEM part numbers 81804648, C5NN7N051B, E7NN7N051AA (Item #: 179416, Ref: C5NN7N051B) $1.00

Rear Axle to Center Housing O-Ring - This Rear Axle to Center Housing O-Ring is used on multiple Ford / New Holland Models. It is number 1 in the image. This O-Ring should always be replaced when changing brake disc on oil immersed systems. 13.50 inch inside diameter x .139 inches thick. Replaces 379313S91, 83417133, VPJ7202, 47P3852 (Item #: 113943, Ref: 379313S91) $6.40

Shifter Assembly, Cast Iron - For tractor models with 6, 7 and 8 speed transmissions from 10/1966 to 1975. Complete Shift Cover Assembly includes cover, shifter boots. DOES NOT INCLUDE GASKET, KNOBS BOOTS OR PLUGS. We do not have plugs available. Order C5NN7N225A gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 184788, Ref: C5NN7211E) $109.00

Shifter Assembly, Stamped Steel - For tractor models with 6, 7 and 8 speed transmission from 10/1966. Complete Shift Cover Assembly includes cover, levers, shifter knobs, shifter boots. DOES NOT INCLUDE GASKET. Order C5NN7N225A Gasket if needed. Replaces: Levers: C5NN7210D, C5NN7210V, Cover only: 81814737, C5NN7211F, C5NN7222L, C5NN7211E. (Item #: 125338, Ref: S.66211-LG) $81.00

Transmission Countershaft Seal - This Transmission Countershaft Seal replaces original part number E62GE9. New Holland 81717077. It measures 2.885 inches x 1.649 inches x 0.625 inches. (Item #: 172981, Ref: E62GE9) $6.50

Electrical System

No
Picture
Alternator - Lucas Style (12089N) - For Ford tractor models 2310, 2600 (, N, R, V), 2610, 2810, 2910, 3600 (, N, NO, R, V), 3610, 3900, 3910 (, H, N, R), 4100, 4110, 4600, 4600SU, 4610, 4610SU, 5110, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 9030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 455, 515, 530A, 531, 532, 535, 550, 555, 555A, 555B, 655, 655A, Compatible with Ford Engine (s) BSD332, BSD333, BSD442, BSD444, BSD444T, Replaces Ford OEM number E3NN10B376AB, E3NN10B376AC, E3NN10B376AD, Replaces Lucas manufacturer number LRA00530, Lucas Style, Design: IR/EF, Voltage: 12, Rotation: Clockwise, Amperage: 45, Regulator: Internal, Pulley: Class V1, Single Groove, NOTE 1:Battery sense through external thermistor on vehicle. Do not apply full voltage (14V) to wire, will damage regulator. Need to use 1/4 watt 200 ohm resistor between S-terminal wire (orange) to B+ to test., (Item #: 189295) $119.00

Battery Tray - 73 and 80 Amp Battery - For Ford tractor models 2000 (gas), 2100 (gas), 2110 (gas), 2120 (gas), 2300 (gas), 2310 (gas), 2310 (diesel), 2600 (diesel), 2610 (diesel), 2810 (diesel), 2910 (diesel), 3000 (gas), 3055 (gas), 3100 (gas), 3110 (gas), 3120 (gas), 3150 (gas), 3300 (gas), 3310 (gas), 3330 (gas), 3400 (gas), 3600 (diesel), 3610 (diesel), 3900 (diesel), 3910 (diesel), 4000 (gas), 4100 (gas and diesel), 4110 (gas and diesel), 4140 (gas), 4200 (gas), 4330 (gas), 4340 (gas), 4400 (gas), 4410 (gas), 4600 (diesel), 4600SU (diesel), 4610 (diesel), 4610SU (diesel), 5000 (gas), 5100 (gas), 5110 (diesel), 5200 (gas), 5340 (gas), 5600 (diesel), 5610 (diesel), 5900 (diesel), 6410 (diesel), 6600 (diesel), 6610 (diesel), 6810 (diesel), 7000 (diesel), 7100 (diesel), 7200 (diesel), 7600 (diesel all 1966-later), Compatible with Ford Construction and industrial models 230A (diesel), 231 (diesel), 233 (diesel), 234 (diesel), 333 (diesel), 334 (diesel), 335 (diesel), 420 (diesel), 515 (diesel), 530A (diesel), 531 (diesel), 532 (diesel), 535 (diesel), 3500 (gas), 3550 (gas), 4500 (gas all 1966-later), Replaces Ford OEM number D3NN10723A, 81837763, C5NN10N650A, C9NN10723B, For 73 or 80 amp battery, Dimensions: 17-1/2" x 8", Comes primered (color may vary). Prior to painting check fitment, sanding and skim coat may be needed, (Item #: 155837) $71.00

Fuse Holder - Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 22-226, 578489, 7020480, C7NN14411A, H340505, P41894 (Item #: 112273, Ref: 376852R91) $10.40

Hold-down, Battery Clamp - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600 (& N, R, V), 3000 (Series), 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 3900, 4000, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4500, 4600, 4600SU, 5000 (Series), 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6500, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000 (Series), 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 231, 233, 250C, 260C, 333, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445D, 450, 455, 455C, 455D, 515, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 650, 655, 655A, 655C, 655D, 675D, Replaces Ford OEM number D6NN10716C, 83925344, For 128Ah 4DLT Diesel Battery, (Item #: 176620) $92.00

Ignition Switch, Keyed - This 5 position, 7 terminal ignition switch comes with 2 key. Used on many tractor models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Not for Shibaura built tractors. Replaces OEM 82849085, 81871583, 81838692, 83999543, 83902803, E7NN11N501AB, D3NN11N501A, D5NN11N501A, C5NN11N501A, E7NN11N501AC, 83959710, 83976890, E7NN11N501AA, E8NN11N501AA (Item #: 116913, Ref: E7NN11N501AB) $8.70

Oil Pressure Sending Unit - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2000, 2600, 2610, 3000, 3230, 3310, 3400, 3500, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4500, 4600, 4600SU, 4610, 4610SU, 4830, 5000, 5600, 5640, 5700, 6000, 6600, 6610, 6640, 6700, 7000, 7600, 7610, 7700, 7740, 7810, 7840, 7910, 8000, 8210, 8240, 8340, 8400, 8530, 8600, 8700, 8730, 8830, 9000, 9030, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340A, 340B, 345C, 345D, 445, 445A, 445D, 455D, 515, 531, 532, 535, 540, 540A, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 655, 655A, 655C, 655D, 675D, 675E, 775, 3500, 4500 Replaces Ford OEM number D8NN9278BB, D1NN9278B, D8NN9278BA, D8NN9278BC, D8NN9278F, F0NN9278AA, F1NN9278AA, C8NF9278B, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TS90, TS100, TS110, Replaces New Holland OEM number 82028130, 81873524, (Item #: 121174) $7.20

Starter Safety Switch - For tractor models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966 and up. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 and up with Manual Reversing Transmission. Ind: 231, 233, 335, 2600, 3600 all with 6 speed 1975 and up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU all 8 speed 1975 and up. For 5600, 6600, 7600 with 7 and 8 speed 1975 and up. For 5700, 6700, 7700 with 7 and 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with Manual Reversing Transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. Replaces C7NN7A247A, 81817901 (Item #: 115052, Ref: C7NN7A247A) $13.70

Starter Solenoid - Hitachi Style, 12 Volt, 3 Terminal Solenoid. It is used on many Ford / New Holland Tractors and Industrial models using Hitachi Starter numbers: S13-61, S13-61A, S12-62, S13-32, S13-32A, S13-73, S13-74, S1361, S1361A, S1262, S1332, S1332A, S1373, S1374. Replaces Ford / New Holland part numbers E2NN11390AA, SBA185816070, SBA185816200, SBA185846183. Replaces Hitachi Part Numbers 2114-67006, 2130-17004, 2130-8700, 2114-37003. Replaces Isuzu Part Numbers 8-94216-6330, 8-94218-7720. (Item #: 128269, Ref: E2NN11390AA) $31.20

Voltage Regulator - 12 Volt - For Ford tractor models 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3900, 3910, 4100, 4110, 4600, 4600SU, 4610, 4610SU, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 550, 555, 555A, 555B, 655, 655A, Compatible with Ford Engine (s) BSD333, BSD442, BSD444, Replaces Ford OEM number D4NN10316A, 81846029, (Item #: 127002) $24.70

Engine Bearings

No
Picture
Ball Bearing - Power Steer Gear Assembly - For Ford tractor models Dexta, Super Dexta, 2310, 2600, 2810, 2910, 3230, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5100, 5600, 5610, 6600, 6610, 6710, 7000, 7100, 7410, 7600, 7610, 7710, Compatible with Ford Construction and industrial models 234, 334, 532 Replaces Ford OEM number C9NN3647A, 119811ES, , Compatible with Massey Ferguson tractor models 35, 35X, 135, 148, 230, 240, 250, Replaces Massey Ferguson OEM number 3900187M1, 3711715M1, 354466X1, 2971X, Replaces New Holland OEM number 81822004, Size: 5/16", Material: Carbon Steel, (Item #: 168936) $0.50

Main Bearings - .040" Oversize - Set - For Ford tractor models TW5 (1/83-2/90), TW10 (1/79-12/82), TW15 (1/83-2/90), TW20 (1/79-12/82), TW25 (1/83-2/90), TW30 (1/79-11/82), TW35 (1/83-2/90), 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2120 (1/65-12/74), 2300 (1/65-12/74), 2310 (1/65-12/74), 2310 (3/82-12/83), 2600 (1/75-12/81), 2600 (N, R, 1/75-12/81), 2600 (V, 10/75-9/96), 2610 (1/81-4/83), 2610 (V, 1/81-2/90), 2810 (1/84-2/90), 2910 (5/83-2/90), 3000 (1/65-12/74), 3055 (1/65-12/74), 3100 (1/65-12/74), 3120 (1/65-12/74), 3190 (1/65-12/74), 3230 (3/90-9/93), 3300 (1/65-12/74), 3310 (1/65-12/74), 3330 (1/65-12/74), 3400 (1/65-9/75), 3430 (3/90-1/98), 3500 (1/65-12/74), 3550 (1/65-12/74), 3600 (1/75-12/81), 3600 (N, NO, V, 1/75-12/81), 3600 (R, 1/75-12/77), 3610 (V, 1/81-4/83), 3610 (8/81-4/83), 3610 (NO, 8/81-4/83), 3900 (1/75-12/81), 3910 (5/83-2/90), 3910 (H, N, 1/83-2/90), 3910 (R, 1/81-12/84), 3910 (V, 12/83-2/90), 3930 (3/90-7/99), 3930 (H, 3/90-8/99), 3930 (NO, 3/90-8/99), 3930 (N, 3/90-6/95), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4110 (1/81-2/90), 4110 (V, 1/81-2/90), 4110 (NO, O, 1/81-2/90), 4110 (N, 12/81-2/90), 4130 (3/90-7/99), 4130 (NO, 3/90-8/99), 4130 (N, 3/90-6/95), 4140 (1/65-12/74), 4190 (1/65-12/74), 4200 (1/65-12/74), 4330 (1/65-12/74), 4340 (1/65-12/74), 4400 (1/65-12/74), 4410 (1/69-12/74), 4500 (1/65-12/74), 4600 (1/75-12/81), 4600 (O, 1/75-12/81), 4600 (NO, 10/75-12/81), 4600SU (1/75-7/81), 4610 (1/81-2/90), 4610 (V, 1/81-2/90), 4610 (NO, O, 1/81-2/90), 4610 (N, 1/81-2/90), 4610SU (8/81-2/90), 4630 (3/90-7/99), 4630 (NO, 3/90-8/99), 4630 (N, 3/90-6/95), 4630 (O, 3/90-later), 4830 (7/90-5/94), 4830 (N, O, 7/90-5/94), 5000 (1/65-1/75), 5030 (10/92-4/98), 5030 (O, 6/94-4/98), 5100 (1/65-12/74), 5110 (5/84-10/91), 5190 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5610 (1/81-12/93), 5700 (7/78-9/80), 5900 (Mexico, 5/85-12/93), 6410 (UK, 1/81-12/91), 6500 (3/73-10/75), 6600 (1/75-12/81), 6600 (O, 1/75-12/81), 6600 (C, 1/75-9/76), 6610 (1/81-12/93), 6610 (O, 1/81-10/91), 6700 (1/75-12/80), 6710 (1/81-9/85), 6810 (4/89-10/91), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7410 (4/89-10/91), 7600 (1/75-12/81), 7600 (C, 1/75-9/76), 7610 (1/81-10/91), 7610 (O, 10/81-12/91), 7700 (1/75-12/80), 7710 (1/81-10/91), 7810 (2/88-10/91), 7810 (O, 2/88-10/91), 7910 (1/82-10/91), 8000 (1/68-12/98), 8200 (1/68-12/98), 8210 (1/82-10/91), 8400 (1/71-9/72), 8530 (3/90-12/93), 8600 (10/72-7/76), 8630 (3/90-12/93), 8700 (8/76-12/78), 8730 (3/90-12/93), 8830 (3/90-12/93), 9000 (1/69-12/78), 9200 (1/69-9/72), 9600 (10/72-7/76), 9700 (8/76-12/78), Compatible with Ford Construction and industrial models A62 (1/74-12/83), A62 (5, Europe, 1/74-12/84), A64 (1/74-12/83), A66 (1/74-12/83), 230A (1/81-4/83), 231 (1/75-12/81), 233 (1/75-12/81), 234 (1/75-4/83), 250C (9/89-12/94), 260C (9/89-12/94), 333 (1/75-12/81), 334 (1/81-4/83), 335 (Highway, 1/83-2/84), 335 (10/75-9/78), 340 (3/79-9/81), 340A (10/81-5/85), 340B (6/85-11/88), 345C (12/88-8/92), 345D (9/92-10/00), 420 (10/75-9/78), 445 (1/78-5/85), 445A (6/85-11/88), 445C (12/88-8/92), 445D, 450 (1/87-11/88), 455 (7/87-11/88), 455C (12/88-8/93), 455D (9/92-9/96), 515 (10/75-9/78), 530A (1/81-4/83), 531 (1/75-12/81), 532 (10/75-9/78), 535 (10/75-9/78), 540 (1/79-9/81), 540A (10/81-5/85), 540B (6/85-11/88), 545 (3/78-5/85), 545A (1/84-11/88), 545C (12/88-8/92), 545D (9/92-12/00), 550 (1/75-9/78), 555 (10/78-10/88), 555A (1/84-5/85), 555B (6/85-10/88), 555C (11/88-8/93), 555D (1/70-12/73), 555D (9/93-7/96), 575D (9/93-7/96), 650 (11/75-12/77), 655 (7/85-10/88), 655A (6/85-10/88), 655C (11/88-8/93), 655D (9/93-7/96), 675D (9/93-7/96), 750 (11/75-12/77), 755 (1/78-12/83), 755A (1/84-12/86), 755B (1/87-1/93), Compatible with Ford Engine (s) BSD332 (9/81-later), BSD333 (H, Diesel, 1/81-later), BSD333 (1/81-later), BSD442 (1/81-later), BSD444 (HT, 1/87-later), BSD444 (H, Diesel, 12/86-later), BSD444 (1/81-later), BSD4 (Item #: 166956) $48.50

No
Picture
Thrust Washer - For Ford tractor models Major, Super Major, 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5110, 5600, 5610, 5640, 5700, 5900, 6000, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8340, Compatible with Ford Construction and industrial models 3500, 3550, 4500, Replaces Ford OEM number 508E4230A, (Item #: 174131) $4.30

Engine Gaskets

Oil Pan Gasket - For the following 3 Cylinder Gas or Diesel Engines: 158, 175, 192, 201 CID, used in tractors 1965 and newer: 2000, 2100, 2110, 2110LCG, 2120, 2150, 230, 2300, 230A, 231, 2310, 233, 234, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3230, 3300, 3310, 333, 3330, 334, 335, 3400, 340A, 3430, 345C, 345D, 3500, 3550, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110LCG, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445A, 445C, 445D, 450, 4500, 455, 455C, 455D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 5000, 5100, 515, 5200, 530A, 531, 532, 5340, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 55A, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7630, 7700. Replacing 83990594, D0NN6710B, 87295239, 81824481, 1824481, F0NN710AA. (Item #: 106335, Ref: F0NN6710AA) $9.80

Rear Seal Gasket - Gasket, Crankshaft Rear Seal Retainer. For 230A, 231, 2310, 233, 234, 250C, 2600, 2600N, 2600V, 2610, 2610V, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 345C, 345D, 3600, 3600N, 3600V, 3610, 3610V, 3900, 3910, 3910N, 3910V, 3930, 3930N, 4000, 4100, 4110, 4110N, 4110V, 4130, 4130N, 4140, 420, 4200, 4330, 445C, 445D, 4600, 4600SU, 4610, 4610N, 4610SU, 4610V, 4630, 4630N, 4830, 4830N, 5000, 5030, 5110, 515, 530A, 531, 532, 535, 545C, 545D, 550, 555, 555A, 555C, 555D, 5600, 5610, 5700, 575D, 5900, 6410, 655, 655A, 655C, 655D, 6600, 6610, 6700, 6710, 675D, 6810, 7100, 7200, 7410, 755, 755B, 7600, 7610, 7630, 7700, 7710, 7810, 7910, 8000, 8030, 8200, 8210, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces 3959128, 83959128, 83957246, 81813951, E9NN6N305AA, 81864478, 81864478GV, 87554506, E5HN6N305AC, E9NN6N305AB, VPC5311 (Item #: 172805, Ref: E9NN6N305AB) $4.00

Engine Parts

Camshaft Plug - Used on Ford engines: 158, 175, 192, 201, 233, 256, 268, 401 this camshaft plug replaces part numbers C5NND851B, 83994133, C5NND851A, 1816594 (Item #: 166919, Ref: C5NND851B) $43.30

Freeze Plug - Used on Ford / New Holland tractors 1965 and later, this freeze plug is 1.18 inches in diameter (Item #: 173014, Ref: 390625S) $2.10

Front Engine Plate, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3230, 3300, 3310, 3330, 3430, 3500, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 8240, 8340, 9030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 276, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 555E, 575D, 575E, 650, 655C, 655D, 655E, 675D, 675E, 750, 755, 755A, 755B, Compatible with Ford Engine(s) BSD332, BSD333, 256 Replaces Ford OEM nos E5NN6C044A, 83956700, , Compatible with New Holland tractor models TB80, TB85, TB90, TB100, TB110, TB120, TS90, TS100, TS110, TS115, 5610S, 6610S, 6640, 6810S, 7010, 7610S, 7740, 7840, 8010, 8340, Compatible with New Holland Skid Steer Loader(s) L781, L783, L785, L865, LS180, LX865, LX885, Compatible with New Holland Hay Cutting(s) 1499 (s/n 540289-later), 2450 (s/n 606630-earlier), 2550 (s/n 606630-earlier), Replaces New Holland OEM nos E5NN6C044A, 83956700, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 434395) $36.01

Intake Valve Seal - Used on Ford / New Holland equipment, 1965 and later with BSD diesel engines (not Shibaura engines), this seal replaces OEM numbers 81804329, 86602420, C5NE6571A, 1804329. Used on 3, 4 and 6 cylinder engines. One used per intake valve. Sold individually. (Item #: 166331, Ref: C5NE6571A) $0.80

Ring Gear, Flywheel - This ring gear is for gas and diesel. Measures 16.115 outside diameter, 14.52 inside diameter, .625 width and has 128 teeth. For models 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Also used on many industrials and later models. Replaces C5NE6384AA, 83949153, 82954183, 9710967, 500791, 18042303, 80873368, 873368, 3949153. Starter Flywheel Ring Gear. (Item #: 111310, Ref: E2NN6384AA) $41.20

No
Picture
Rocker Arm Shaft Support - For Ford tractor models TW10, TW20, TW30, 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3400, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 450, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 555, 555A, 555B, 650, 655, 655A, 750, 755, 755A, 755B, 3500, 3550, 4400, 4500, 5500, 5550, 6500, 7500, 8400, Replaces Ford OEM number 83952459, C7NN6531A, (Item #: 176429) $18.80

Engine Rings

No
Picture
Piston - .040" - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3190, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 5000, 5600, 5700, 6600, 6700, 7700, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 531, 3500, 3550, 4500, 8400, Replaces Ford OEM number D4NN6108E, C7NN6110AV, C7NN6110G, C5NN6110T, C7NN6108BN, C5NN6108T, D5NN6110AM, D5NN6110BK, D4NN6110L, D2NN6108U, D2NN6110AE, 81846018, 83910841, 31P31, D6NN6108F, D6NN6110R, D6NN6110X, D6NN6108K, D4NN6108AE, Size: .040", (Item #: 172308) $194.00

Piston Pin Bushing - For Ford tractor models TW5, TW15, TW25, TW35, 2600, 3600, 3900, 4100, 4600, 4600SU, 5110, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6640, 6700, 6710, 6810, 7410, 7610, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 231, 233, 333, 335, 420, 515, 531, 532, 535, Replaces Ford OEM number F0NN6207BA, (Item #: 166314) $5.50

Fuel System / Air Intake

Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 531, 5600, 5610, 5700, 540, 6000, 6600, 3600V, 4000SU, 4120, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4600SU, 5100, 5200, 5340, 5900, 6610, 6700. Can replace Donaldson P02-0227, also replaces 101965A, 10P871, 1125804, 1508881M1, 3119347, 365413R1, 71125804, 73186, 73533, 80073533, C0NN9A663A, F3446R, L60631, R28794. (Item #: 157279, Ref: R28794) $8.80

Air Cleaner Cover - Twist locks into top of air cleaner. Diameter 6 1/4 inches. For tractor models 2000, 3000, 4000, 4000SU, 2600, 3600, 4600, 4600SU, IND: 230A, 231, 234, 334, 335, 340, 340A, (3400, 3500, 3550 GAS/DIESEL), 2110LCG, 4110LCG, (4400, 4500 GAS/DIESEL), 445, (515 GAS/DIESEL), 530A, 531, (532 GAS/DIESEL), 545. NOTE: FORD HAD MORE THEN ONE COVER PLEASE COMPARE YOUR TAB DEPTH AND DIAMETER BEFORE ORDERING. (Item #: 113721, Ref: C5NE9661A) $84.00

Air Cleaner Hose - This Air Cleaner Hose fits 231, 233, 2600, 2600V, 333, 335, 3600, 3600V, 3900, 4600, 4600SU, 5110, 515, 531, 532, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710. The large end diameter is 2 1/2 inches and the small end is 2 inch. It replaces OEM part number D9NN9B640AA. (Item #: 182918, Ref: D9NN9B640AA) $12.90

No
Picture
Air Cleaner, Used - For Ford tractor models 2000, 2300, 2310, 2600, 3000, 3055, 3120, 3190, 3300, 3310, 3330, 3400, 3600, 4000, 4100, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 4600, 4600SU, 5000, 5190, 5340, 5600, 6600, 6700, Compatible with Ford Construction and industrial models 231, 233, 333, 531, Replaces Ford OEM number C5NE9600E, 7" Diameter, For a new version of this item use Item #: 155833, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436174) $42.01

Carburetor - Zenith Carburetor Ford 4000 1968up 3Cyl 201 Engine, Zenith Carburetor 13912 replaces and outperforms the original Holley and Zenith carburetors numbers C5NN9510N, C5NN9510R, C7NN9510A, C9NN9510C, C9NN9510D, D3NN9510C, D5NN9510A, R3210, R3657, R3658, R3658A, R4101, R4111, R4111-1A, R6852, R8554, 17A559, 13912. Uses kit number Z107 and float number R4531. Center to center on the 2 mounting bolts is 2 11/16 inches. The measurement form the center of the throttle shaft to center of ball is 3/4 inch. Made in USA, 1 year warranty. (Item #: 100762, Ref: 13912) $594.00

Carburetor Throttle Shaft Arm - Holley R3658A - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 5000, 5100, 5190, 5200, 5340, 6600, Compatible with Ford Construction and industrial models 231, 333, 335, 420, 515, 531, 535, 5500, 5550, Replaces Ford OEM number C9NN9581B, Carburetor Throttle Shaft Arm, Fits Holley carburetors R3658A, (Item #: 113614) $30.00

Fuel Cap, Vented - 2-7/8 inch outside diameter, silver finish, 1-3/4 inches edge of tang to edge of tang, vented, includes gasket. For tractor models 2111, 2120, 2130, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3230, 3300, 3310, 3330, 3430, 3600, 3600V, 3610, 3900, 3910, 3930, 4000, 4030, 4031, 4040, 4100, 4110, 4121, 4130, 4131, 4140, 4190, 4200, 4330, 4340, 4410, 4500, 4600, 4600SU, 4610, 4630. (Item #: 184806, Ref: C5NN9030D) $10.30

Fuel Filter Assembly, Single - This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. Replaces original part numbers 83937061, C5NE9165C, C7NN9162B, D9NN9165BA. Replacement filter for this unit is CAV7111296. (Item #: 153129, Ref: 1446017M91) $34.00

Fuel Filter Screw Kit - Used on many tractors, this screw kit is used in CAV style diesel fuel filter assemblies. Replaces OEM numbers D2NN9N090B, 81829151, 7111-604, 7111-860. Used on Ford: 2000, 2100, 2110, 2120, 2300, 231, 2310, 233, 2600, 2600N, 2600V, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3300, 3310, 333, 3330, 335, 3400, 3500, 3550, 3600, 3600N, 3600V, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 515, 5200, 531, 532, 5340, 535, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8210 (Item #: 179631, Ref: D2NN9N090B) $13.10

Fuel Injector - For Ford tractor models 2310 (3 Cylinder), 2600 (3 Cylinder), 2610 (3 Cylinder), 2810 (3 Cylinder), 2910 (3 Cylinder), 3600 (3 Cylinder), 3610 (3 Cylinder), 3900 (3 Cylinder), 3910 (3 Cylinder), 4100 (3 Cylinder), 4110 (3 Cylinder), 4600 (3 Cylinder), 4600SU (3 Cylinder), 4610 (3 Cylinder), 4610SU (3 Cylinder), 5600 (4 Cylinder), 5700 (4 Cylinder), 6600 (4 Cylinder), 6700 (4 Cylinder), 7600 (4 Cylinder), 7700 (4 Cylinder), Compatible with Ford Construction and industrial models 230A (3 Cylinder), 231 (3 Cylinder), 233 (3 Cylinder), 234 (3 Cylinder), 250C (3 Cylinder), 260C (3 Cylinder), 333 (3 Cylinder), 334 (3 Cylinder), 335 (3 Cylinder), 340 (3 Cylinder), 340A (3 Cylinder), 340B (3 Cylinder), 345C (3 Cylinder), 420 (3 Cylinder), 445 (3 Cylinder), 445A (3 Cylinder), 445C (3 Cylinder), 450 (3 Cylinder), 515 (3 Cylinder), 530A (3 Cylinder), 531 (3 Cylinder), 532 (3 Cylinder), 535 (3 Cylinder), 540 (3 Cylinder), 540A (3 Cylinder), 540B (3 Cylinder), 545 (3 Cylinder), 545A (3 Cylinder), 545C (3 Cylinder), Compatible with Ford Engine (s) BSD332, BSD333, Replaces Ford OEM number D9NN9F593BA, D8NN9F593AA, D4NN9F595A, For a Remanufactured version of this sku use Item #: 210591, (Item #: 119906) $64.00

Fuel Injector - For Ford tractor models 2600 (3 Cylinder), 3600 (3 Cylinder), 3900 (3 Cylinder), 4100 (3 Cylinder), 4600 (3 Cylinder), 4600SU (3 Cylinder), 5600 (4 Cylinder), 5700 (4 Cylinder), 6600 (4 Cylinder), 6700 (4 Cylinder), 7600 (4 Cylinder), 7700 (4 Cylinder), Compatible with Ford Construction and industrial models A62 (4 Cylinder), A64 (4 Cylinder), A66 (4 Cylinder), 231 (3 Cylinder), 233 (3 Cylinder), 333 (3 Cylinder), 335 (3 Cylinder), 420 (3 Cylinder), 515 (3 Cylinder), 531 (3 Cylinder), 532 (3 Cylinder), 535 (3 Cylinder), 650 (4 Cylinder), 750 (4 Cylinder), 755 (4 Cylinder), 755A (4 Cylinder), 755B (4 Cylinder), 6500 (4 Cylinder), 7500 (4 Cylinder), Replaces Ford OEM number D4NN9F593C, D4NN9F575B, D4NN9E527L, 82845260, D4NN9F593CR, For a Remanufactured version of this sku use Item #: 210594, (Item #: 119910) $55.00

Fuel Injector, Remanufactured, D4NN9F593C - For Ford tractor models 2600 (3 Cylinder), 3600 (3 Cylinder), 3900 (3 Cylinder), 4100 (3 Cylinder), 4600 (3 Cylinder), 4600SU (3 Cylinder), 5600 (4 Cylinder), 5700 (4 Cylinder), 6600 (4 Cylinder), 6700 (4 Cylinder), 7600 (4 Cylinder), 7700 (4 Cylinder), Compatible with Ford Construction and industrial models A62 (4 Cylinder), A64 (4 Cylinder), A66 (4 Cylinder), 231 (3 Cylinder), 233 (3 Cylinder), 333 (3 Cylinder), 335 (3 Cylinder), 420 (3 Cylinder), 515 (3 Cylinder), 531 (3 Cylinder), 532 (3 Cylinder), 535 (3 Cylinder), 650 (4 Cylinder), 750 (4 Cylinder), 755 (4 Cylinder), 755A (4 Cylinder), 755B (4 Cylinder), 6500 (4 Cylinder), 7500 (4 Cylinder), Replaces Ford OEM number D4NN9F593C, D4NN9F575B, D4NN9E527L, 82845260, D4NN9F593CR, For a New version of this sku use Item #: 119910, (Item #: 210594) $79.01

Fuel Injector, Remanufactured, D8NN9F593DB - For Ford tractor models TW10 (6 Cylinder), TW20 (6 Cylinder), TW30 (6 Cylinder), 2310 (3 Cylinder), 2600 (3 Cylinder), 2610 (3 Cylinder), 2810 (3 Cylinder), 2910 (3 Cylinder), 3610 (3 Cylinder), 3900 (3 Cylinder), 3910 (3 Cylinder), 4100 (3 Cylinder), 4110 (3 Cylinder), 4600 (3 Cylinder), 4600SU (3 Cylinder), 4610 (3 Cylinder), 4610SU (3 Cylinder), 5110 (3 Cylinder), 5600 (4 Cylinder), 5610 (4 Cylinder), 5700 (4 Cylinder), 5900 (4 Cylinder), 6410 (4 Cylinder), 6500 (4 Cylinder), 6600 (4 Cylinder), 6610 (4 Cylinder), 6700 (4 Cylinder), 6710 (4 Cylinder), 6810 (4 Cylinder), 7410 (4 Cylinder), 7600 (4 Cylinder), 7610 (4 Cylinder), 7700 (4 Cylinder), 7710 (4 Cylinder), 8000 (6 Cylinder), 8700 (6 Cylinder), 9000 (6 Cylinder), 9700 (6 Cylinder), Compatible with Ford Construction and industrial models 230A (3 Cylinder), 231 (3 Cylinder), 233 (3 Cylinder), 234 (3 Cylinder), 250C (3 Cylinder), 260C (3 Cylinder), 333 (3 Cylinder), 334 (3 Cylinder), 335 (3 Cylinder), 340 (3 Cylinder), 340A (3 Cylinder), 340B (3 Cylinder), 420 (3 Cylinder), 445 (3 Cylinder), 445A (3 Cylinder), 450 (3 Cylinder), 515 (3 Cylinder), 530A (3 Cylinder), 531 (3 Cylinder), 532 (3 Cylinder), 535 (3 Cylinder), 540 (3 Cylinder), 540A (3 Cylinder), 540B (3 Cylinder), 545 (3 Cylinder), 545A (3 Cylinder), 550 (3 Cylinder), 555 (3 Cylinder), 555A (3 Cylinder), 555B (3 Cylinder), 650 (4 Cylinder), 655 (4 Cylinder), 655A (4 Cylinder), 750 (4 Cylinder), 755 (4 Cylinder), 755A (4 Cylinder), 755B (4 Cylinder), 7500 (4 Cylinder), Compatible with Ford Engine (s) BSD332, Replaces Ford OEM number D8NN9F593DB, D9NN9F593AA, D5NN9F592AR, D4NN9F593BR, D4NN9F593B, D4NN9F595A, For a New version of this sku use Item #: 119905, (Item #: 210588) $90.01

Fuel Injector, Remanufactured, D9NN9F593CA - For Ford tractor models TW5 (6 Cylinder), TW15 (6 Cylinder), TW25 (6 Cylinder), TW35 (6 Cylinder), 2600 (3 Cylinder), 3600 (3 Cylinder), 3900 (3 Cylinder), 4100 (3 Cylinder), 4600 (3 Cylinder), 4600SU (3 Cylinder), 5110 (3 Cylinder), 5600 (4 Cylinder), 5610 (4 Cylinder), 5700 (4 Cylinder), 5900 (4 Cylinder), 6410 (4 Cylinder), 6500 (4 Cylinder), 6600 (4 Cylinder), 6610 (4 Cylinder), 6700 (4 Cylinder), 6710 (4 Cylinder), 6810 (4 Cylinder), 7410 (4 Cylinder), 7600 (4 Cylinder), 7610 (4 Cylinder), 7700 (4 Cylinder), 7710 (4 Cylinder), 7810 (6 Cylinder), 7910 (6 Cylinder), 8210 (6 Cylinder), 8530 (6 Cylinder), 8630 (6 Cylinder), 8730 (6 Cylinder), 8830 (6 Cylinder), Compatible with Ford Construction and industrial models A62 (4 Cylinder), A64 (4 Cylinder), A66 (4 Cylinder), 231 (3 Cylinder), 233 (3 Cylinder), 333 (3 Cylinder), 335 (3 Cylinder), 420 (3 Cylinder), 515 (3 Cylinder), 531 (3 Cylinder), 532 (3 Cylinder), 535 (3 Cylinder), 650 (4 Cylinder), 750 (4 Cylinder), 755 (4 Cylinder), 755A (4 Cylinder), 755B (4 Cylinder), 7500 (4 Cylinder), Compatible with Ford Engine (s) BSD442, BSD444, BSD444T, BSD666, BSD666T Replaces Ford OEM number D9NN9F593CA, 3919128, D9NN9F593LAR, , Compatible with New Holland Hay Cutting (s) 1118, For a New version of this sku use Item #: 119909, (Item #: 210593) $108.01

Fuel Injector, Remanufactured, D9NN9F593DA - For Ford tractor models TW5, TW10, TW15, TW20, TW25, TW30, TW35, 2600, 3600, 3900, 4600, 4600SU, 5110, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7410, 7600, 7610, 7700, 7710, 7810, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700, Compatible with Ford Construction and industrial models A62, A64, A66, 231, 233, 333, 335, 420, 515, 531, 532, 535, Compatible with Ford Engine (s) BSD442, BSD444, BSD666, Replaces Ford OEM number D9NN9F593DA, For a New version of this sku use Item #: 119904, (Item #: 210002) $84.01

Fuel Injector Seal Kit - For (1) injector on: post 1965 tractors with 3 -6 cylinders models. Includes cork dust seal, copper compression seal and 2 aluminum return line seals. Replaces Replaces: 380428S, 380428S43, 81806142, 81806277, 81821105, 81867564, 83995430, C5NE9E529A, C5NE9F596A, C5NE9G546A (Item #: 156291, Ref: C5NE9F596A) $2.20

Fuel Sediment Bowl Assembly - This new Sediment Bowl Assembly is used on Ford Gas Tractors 1965 and later. It replaces original part number D4NN9155A. Replaces 83416255 Connector, C5NE9165D Cover, D4NN9155A Filter Assembly, C5NN9160A Gasket, C5NN9176A Filter, 86508531 Bowl, D4NN9C297A Bail. (Item #: 155996, Ref: D4NN9155A) $55.00

Fuel Tank - For diesel models: 2000, 2100 (1965 and up), 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3150, 3300, 3310, 333, 3600, 3610, 3900, 3910, 4000SU (aka 4140), 4100, 4110, 4140 (1965-1974), 4610SU (1981-2/1990), 4600SU, 531 (1975-1981), L/FWD and L/CAB. Will replace gas fuel tanks but is not exactly like original - will bolt in, slight size and cap differences. The diesel fuel line return to the tank will have to be plugged. This tank uses C5NN9030D Cap, D8NN9A316KA Fuel Sending Unit, C5NN9N283A Fuel Sender Lock Ring and E2NN9276AA Fuel Sender Lock Ring Seal, each sold separately. Replaces OEM part numbers C5NN9002AC, C5NN9200AC, E3NN9002AB. 2 inch filler neck. Note, the 3-1/4 inch filler neck tank is no longer manufactured. (Item #: 103893, Ref: C5NN9002AC) $130.00

Injection Line - #1 Cylinder, E0NN9A555AA - For Ford tractor models 2310 (1/1/81-2/28/90), 2600 (1/1/75-later), 2600 (N, R, V (1/1/75-later), 2610 (1/1/81-2/28/90), 2610 (V, 1/1/81-2/28/90), 2810 (1/1/81-2/28/90), 2910 (1/1/81-2/28/90), 3600 (1/1/75-later), 3600 (N, R, V (1/1/75-later), 3600 (NO, 1/1/75-later), 3610 (1/1/81-2/28/90), 3610 (V, 1/1/81-2/28/90), 3610 (NO, 1/1/81-2/28/90), 3900 (1/1/75-later), 3910 (1/1/81-2/28/90), 3910 (V, 1/1/81-2/28/90), 3910 (H, N, R, 1/1/81-2/28/90), 4100 (1/1/75-later), 4110 (1/1/81-2/28/90), 4110 (V, 1/1/81-2/28/90), 4110 (N, NO, O, 1/1/81-2/28/90), 4600 (1/1/75-later), 4600 (NO, O, 1/1/75-later), 4600SU (1/1/75-later), 4610 (1/1/81-2/28/90), 4610 (V, 1/1/81-2/28/90), 4610 (N, NO, 1/1/81-2/28/90), 4610SU (1/1/81-2/28/90), Compatible with Ford Construction and industrial models 230A (1/1/81-2/28/90), 231 (1/1/75-later), 233 (1/1/75-later), 234 (1/1/81-2/28/90), 333 (1/1/75-later), 334 (1/1/81-2/28/90), 335 (1/1/81-2/28/90), 340, 340A, 340B, 420 (1/1/75-later), 445, 445A, 455 (7/1/87-11/30/88), 515 (1/1/75-later), 530A (1/1/81-2/28/90), 531 (1/1/75-later), 532 (1/1/75-later), 535 (1/1/75-later), 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, Compatible with Ford Engine (s) BSD332 (1/1/81-11/30/88), BSD333 (1/1/81-11/30/88), BSD333 (H, 1/1/81-11/30/88), Replaces Ford OEM number E0NN9A555AA, Tubing with fittings, For Cylinder #2 use Item #: 162813, (Item #: 162814) $16.60

Injection Line - #2 Cylinder - For Ford tractor models 2310 (1/1/81-2/28/90), 2600 (1/1/75-later), 2600 (N, R, V (1/1/75-later), 2610 (1/1/81-2/28/90), 2610 (V, 1/1/81-2/28/90), 2810 (1/1/81-2/28/90), 2910 (1/1/81-2/28/90), 3600 (1/1/75-later), 3600 (N, R, V (1/1/75-later), 3600 (NO, 1/1/75-later), 3610 (1/1/81-2/28/90), 3610 (V, 1/1/81-2/28/90), 3610 (NO, 1/1/81-2/28/90), 3900 (1/1/75-later), 3910 (1/1/81-2/28/90), 3910 (V, 1/1/81-2/28/90), 3910 (H, N, R, 1/1/81-2/28/90), 4100 (1/1/75-later), 4110 (1/1/81-2/28/90), 4110 (V, 1/1/81-2/28/90), 4110 (N, NO, O, 1/1/81-2/28/90), 4600 (1/1/75-later), 4600 (NO, O, 1/1/75-later), 4600SU (1/1/75-later), 4610 (1/1/81-2/28/90), 4610 (V, 1/1/81-2/28/90), 4610 (N, NO, 1/1/81-2/28/90), 4610SU (1/1/81-2/28/90), Compatible with Ford Construction and industrial models 230A (1/1/81-2/28/90), 231 (1/1/75-later), 233 (1/1/75-later), 234 (1/1/81-2/28/90), 333 (1/1/75-later), 334 (1/1/81-2/28/90), 335 (1/1/81-2/28/90), 340, 340A, 340B, 420 (1/1/75-later), 445, 445A, 455 (7/1/87-11/30/88), 515 (1/1/75-later), 530A (1/1/81-2/28/90), 531 (1/1/75-later), 532 (1/1/75-later), 535 (1/1/75-later), 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, Compatible with Ford Engine (s) BSD332 (1/1/81-11/30/88), BSD333 (1/1/81-11/30/88), BSD333 (H, 1/1/81-11/30/88), Replaces Ford OEM number D9NN9A556AA, Tubing with fittings, For Cylinder #1 use Item #: 162813, (Item #: 162812) $20.80

Injection Line - #3 Cylinder - For Ford tractor models 2310, 2600 (N, R, V), 2610 (and V), 2810, 2910, 3600 (N, NO, R, V), 3610 (and NO, V), 3900, 3910 (and H, N, R, V), 4100, 4110 (and N, NO, O, V), 4600 (NO, O), 4600SU, 4610 (and N, NO, O, V), 4610SU, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 340, 340A, 340B, 420, 445, 445A, 455, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B, Compatible with Ford Engine (s) BSD332, BSD333, Replaces Ford OEM number D9NN9A557AA, 3919553, Tubing with fittings, (Item #: 162813) $16.00

Injection Line Set - Used with rotary injection pump. For tractor models: 2310 (1/1/81-2/28/90), 2600, 2600, 2610 (1/1/81-2/28/90), 2610 (V, 1/1/81-2/28/90), 2810 (1/1/81-2/28/90), 2910 (1/1/81-2/28/90), 3600, 3610 (1/1/81-2/28/90), 3610V, 3610 (NO, 1/1/81-2/28/90), 3900 (1/1/75-later), 3910, 4110 (1/1/81-2/28/90), 4600, 4600SU (1/1/75-later), 4610 (1/1/81-2/28/90), 4610 (V, 1/1/81-2/28/90), 4610 (N, NO, 1/1/81-2/28/90), 4610SU (1/1/81-2/28/90). Compatible with Ford Construction and Industrials: 230A (1/1/81-2/28/90), 231 (1/1/75-later), 233 (1/1/75-later), 234 (1/1/81-2/28/90), 333 (1/1/75-later), 334 (1/1/81-2/28/90), 335 (1/1/81-2/28/90), 340, 340A, 340B, 420 (1/1/75-later), 445, 445A, 455 (7/1/87-11/30/88), 515 (1/1/75-later), 530A (1/1/81-2/28/90), 531 (1/1/75-later), 532 (1/1/75-later), 535 (1/1/75-later), 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B Replaces E0NN9A555AA, D9NN9A557AA, D9NN9A556AA. (Item #: 162827, Ref: FPL500) $46.00

No
Picture
Injection Line Set - 3 Cylinder - For Ford tractor models 2600 (3 cyl, 1/75-12/81), 2600 (N, 3 cyl, 1/75-12/81), 2600 (R, 3 cyl, 1/75-12/81), 3600 (3 cyl, 1/75-12/81), 3600 (N, 3 cyl, 1/75-12/81), 3600 (NO, 3 cyl, 1/75-12/81), 3600 (V, 3 cyl, 1/75-12/81), 3600 (R, 3 cyl, 1/75-12/77), 3900 (3 cyl, 1/75-12/81), 4100 (3 cyl, 1/75-12/81), 4600 (3 cyl, 1/75-12/81), 4600 (O, ), 4600 (NO, 3 cyl, 10/75-12/81), 4600SU (3 cyl, 1/75-7/81), 5600 (4 cyl, 1/75-12/81), 5610 (4 cyl, 1/81-12/93), 5700 (4 cyl, 7/78-9/80), 5900 (4 cyl, 5/85-12/93), 6600 (4 cyl, 1/75-12/81), 6600 (O, 4 cyl, 1/75-12/81), 6600 (C, 4 cyl, 1/75-9/76), 6610 (4 cyl, 1/81-12/93), 6610 (O, 4 cyl, 1/81-10/91), 6700 (4 cyl, 1/75-12/80), Compatible with Ford Construction and industrial models 231 (3 cyl, 1/75-12/81), 233 (3 cyl, 1/75-12/81), 256V (3 cyl, 1/74-12/84), 333 (3 cyl, 1/75-12/81), 335 (3 cyl, 10/75-9/78), 420 (3 cyl, 10/75-9/78), 515 (3 cyl, 10/75-9/78), 531 (3 cyl, 1/75-12/81), 532 (3 cyl, 10/75-9/78), 535 (3 cyl, 10/75-9/78), Compatible with Ford Engine (s) BSD442 (4 cylinder, 1/81-later), 256 (Diesel), Replaces Ford OEM number D9NN9A555BA, D9NN9A556BA, D9NN9A557BA, For cylinders #1, #2, #3, Will fit some 4 cylinders, #1, #2, #3 cylinders lines, For Injection Line #1 only use Item #: 171587, (Item #: 169713) $63.00

Injector Pump Gasket Set - Fits CAV rotary pumps only. Replaces CAV9094713GV, CAV9094-713GV. (Item #: 178115, Ref: CAV9094-713) $38.20

Injector Pump Repair Kit - Fits DPA CAV 3, 4, 6 Cylinder Rotary Pumps only. Replaces OEM part number CAV7135-110. (Item #: 129312, Ref: CAV7135-110) $19.00

Precleaner Bowl - Precleaner Bowl of clear plastic with 10 1/2 inch outside diameter. Designed for tractors with a 3" to 4" inlet. Outer diameter measures 10-1/2 inches at the top. Side height measures 3 inches. Inner diameter of the cone measures 5-9/16 inches at the top. Overall height measures 4 inches. Replaces C9NN9A663A, 594075, 80330381, 81821685 (Item #: 107972, Ref: C9NN9A663A) $11.30

Throttle Rod Connector - This Throttle Rod Connector is made from plastic. It is used on Ford 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 655, 655A. Replaces C5NN9740A, 81811646 (Item #: 167626, Ref: C5NN9740A) $9.00

Throttle Rod Grommet - This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Item #: 164360, Ref: 353873S) $2.60

Gauges

Fuel Sending Unit Lock Ring Seal - This Fuel Sending Unit Lock Ring Seal is used with C5NN9N283A Lock Ring and on tanks E2NN9002BA, C5NN9002AC and D8NN9002HA. Replaces original part number E2NN9276AA (Item #: 178193, Ref: E2NN9276AA) $3.80

Sending Unit Lock Ring - For various fuel tanks such as E2NN9002BA, C5NN9002AC and D8NN9002HA which use a lock ring to secure the fuel sender (like the D8NN9A316KA). Fits many Ford Models, 1965 and later. Order Seal E2NN9276AA separately if needed. Replaces C5NN9N283A, 81811218. (Item #: 152001, Ref: C5NN9N283A) $4.80

Tachometer Cable - This Tachometer Cable measures 48 inches long and fits the following tractor models without a cab: 2000 (3 cylinder), 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000 (3 cylinder), 4100, 4110, 4400, 4500, 4600SU (from 1975-1981), 4610 (from 1981 and up), 5000, 5100, 5600, 5610, 6600, 6610, 7000, 7600, and 7610. Replaces: 506332M91, D9NN17365AA, D9NN17365AB, G45230, 150938R91, 363811R92, TO19144, 363811R92, 82847520, and D3NN17365F. (Item #: 111009, Ref: D3NN17365C) $11.50

Hitch / Drawbar

Bushing, Lower Lift Link - Bushing, Lower Lift Link OD .995 inch ID .750 inch. (Item #: D0NNA865A) $16.10

Bushing, Lower Lift Link - For Ford tractor models 2810, 2910, 3055, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 4610SU, Compatible with Ford Construction and industrial models 3550, 4500, Replaces Ford OEM number D0NNA865A, (Item #: 169487) $15.80

No
Picture
Chain Strap - For Ford tractor models 2810, 2910, 3055, 3900, 3910, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 3550, 4500, Replaces Ford OEM number C5NNN916B, Right Hand, (Item #: 176420) $16.60

No
Picture
Check Chain Eyelet - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 2000, 2031, 2100, 2110, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 3000, 3500, 3600, 3610, 4000, 4031, 4110, 4120, 4131, 4600SU, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 334, 335, 531, Replaces Ford OEM number C5NN667A, Right Hand, For Left Hand Check Chain Eyelet use Item #: 176412, (Item #: 176411) $5.20

No
Picture
Check Chain Eyelet - For Ford tractor models 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 2000, 2031, 2100, 2110, 2120, 2131, 2150, 2300, 2310, 2600, 2610, 3000, 3500, 3600, 3610, 4000, 4031, 4110, 4120, 4131, 4600SU, Compatible with Ford Construction and industrial models 230A, 231, 233, 333, 334, 335, 531, Replaces Ford OEM number C5NN678A, Left Hand, For Right Hand Check Chain Eyelet use Item #: 176411, (Item #: 176412) $13.50

No
Picture
Check Chain Eyelet - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4110, 4600SU, Compatible with Ford Construction and industrial models 3500, Replaces Ford OEM number C5NNA948A, Left Hand, (Item #: 176418) $15.30

Leveling Box Assembly with Fork and Knuckle - Category I, 28 inch minimum length, 7/8 inch fork spacing, 3/4 inch holes. For tractor models 3900, 4600SU, 2810, 2910, 3910, 4110, 4610, 250C, 260C, 340A, 340B, 345C, 420, 445, 445A, 445B, 445C, 515, 532, 535, 540, 540A, 540B, 545, 545B, 545C. Replaces E0NN569DA, E0NN585CA, 83954426, D8NN569BA, D3NN569E, E4NN569BA, D5NN569D, 83925901 (Item #: 169749, Ref: E4NN569BA) $183.62

Lift Arm - RH - For Ford tractor models 2310, 2600, 3000, 3055, 3100, 3600, 3610, 3900, 4000, 4600, 4600SU, Replaces Ford OEM number C5NN555AF, Right hand, Tractor end: Category 1, Implement end: Category 1, Length: 33" center to center, For Cat 1/2 use Item #: 122628, (Item #: 169971) $86.58

No
Picture
Lift Rod Assembly - Left Hand - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 3000, 3100, 3120, 3300, 3310, 3330, 3400, 3500, 3600, 3610, 4110, 4600SU, Compatible with Ford Construction and industrial models 230A, 231, 233, 334, 335, 340, 420, 530A, 531, 3550, 4140, Compatible with Ford Baler (s) 530, Replaces Ford OEM number 2N564B, E0NNB484DA, Left hand, Catagory 1, Adjusts from 21.5" to 24.5", Replaces C5NNB863A Yoke Rod, E0NN585BA Fork, 9N595 Pin, 957E566 Knuckle, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115656) $48.80

Lower Lift Arm Pin Nut - Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Item #: 178033, Ref: 353927X1) $1.70

Lower Lift Arm Pin Nut - Used internally on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Nylon Lock Nut. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 376450X1, 376267X1, 360262X1, 1679532M1 (Item #: 190743) $0.60

Lower Lift Link Pin - Used on Ford Ford tractor models: 2810, 4600, 4600SU, 4100, 4330, 4200, 4110, 4340, 3910, 4000, 3055, 4500, 4610, 3600, 3900, 2910, 3550, 4410, 3610. Replaces 83976439, C9NN563A, D0NN563D. Length: 5.970 inches, Thread: .750 inches. (Item #: 168613) $46.20

$Ford 4600SU Lower Link Lift Arm (CAT 1\2)$
Lower Link Lift Arm (CAT 1/2) - Ford Lower Lift Arm R/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954401. (Item #: 122628, Ref: E5NN555AA) $99.00

$Ford 4600SU Lower Link Lift Arm L\H (CAT 1\2)$
Lower Link Lift Arm L/H (CAT 1/2) - Ford Lower Lift Arm L/H (CAT 1/2) measures 35 5/8 inches of length, 3 1/2 inches wide, and 11/16 in thickness. Applicable for 2000, 2000 US Built, 2100, 2110, 2110LCG, 2120, 2150, 2300, 230A, 230A US Built, 230AInd., 231, 231 US Built, 2310, 233, 250C, 2600, 2600 US Built, 2600N, 2600V, 2610, 2610 US Built, 2610V, 2810, 2910, 3000, 3000 US Built, 3055, 3100, 3120, 3300, 3310, 333, 3330, 334, 335, 335 US Built, 340, 3400, 340A, 340B, 345C, 345D, 3500, 3550, 3600, 3600 US Built, 3600N, 3600V, 3610, 3610 US Built, 3610N, 3610V, 3900, 4000, 4100, 4110, 4140, 420, 4200, 4330, 4340, 4400, 4410, 445, 445 US Built, 445A, 4500, 4600, 4600SU, 4610SU, 515, 530A, 531, 531 US Built, 532, 535, 540, 540A, 540B, 545, 545 US Built, 545A, 545C, 545D. Replaces 83954402. (Item #: 122627, Ref: E5NN556AA) $107.00

Pin, Lift Link, Lower - For Ford tractor models 2810, 2910, 3000, 3055, 3230, 3430, 3550, 3900, 3910, 3930, 4000, 4100, 4110, 4200, 4330, 4340, 4410, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6000, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Compatible with Ford Construction and industrial models 420, 515, 532, 535, 3550, 4400, 4500, Replaces Ford OEM number C0NNC893A, 81812094, 3/4" x 2-1/2", (Item #: 170308) $21.10

Rod Leveling - Leveling Rod Assembly, left hand, adjustment from 27-1/2 inches to 32 inches. For 230A, 2310, 231, 233, 2600, 2610, 3000, 333, 334, 335, 3600, 3610, 4000, 4600SU, 4610, 530A. (Item #: 115658, Ref: E0NNB484DA) $78.00

Stabilizer Bar Left Hand - Link, stabilizer, left hand. For 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600SU, 4610SU. Dual Category - II and III, center to center on holes 31.500 and 32 inches, Holes diameters .875 and 1.125 inch, Overall Length Approx 33.5 inches, Thickness Approx .375 inch, and a Width of 2 inches. (Item #: 170275, Ref: C5NNN455B) $32.60

Stabilizer Bar Right Hand - Link, Stabilizer, Right Hand. For 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600SU, 4610SU. Dual Category - II and III, center to center on holes 31.500 and 32 inches, Holes diameters .875 and 1.125 inch, Overall Length Approx 33.5 inches, Thickness Approx .375 inch, and a Width of 2 inches. (Item #: 170273, Ref: C5NN454B) $31.10

Stabilizer Pin - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3910, 4000, 4000SU, 4100, 4110, 4140, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 5000, 5100, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7410, 7600, 7610, 7700, 7710, Replaces Ford OEM number C5NNN873A, 81802085, Pin Diameter: 7/8", Working Length: 1/2", Thread Length: 1-3/16", (Item #: 168888) $11.00

No
Picture
Stabilizer Pin - For Ford tractor models Major, Power Major, Super Major, 3230, 3430, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5610S, 5700, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7810, 7810S, 7910, 8210, Replaces Ford OEM number 355278S36, 81824450, 5/8" x 2 3/8", (Item #: 173864) $4.30

Top Link Assembly - Top Link Assembly, CAT I and II. Pin holes are 3/4 inch on one end, 1 inch on the other. Verify required length before ordering. This Top Link adjusts from 24 1/2 inches to 34 1/2 inches. (Item #: 102054, Ref: D0NN576B) $77.00

Hydraulic System

Double Spool Remote Valve Kit - This Double Spool Double Acting Hydraulic Remote Valve Kit includes valve, levers, o-rings and hoses. Depending on application, hoses may need an extra fitting to lengthen. Hose bracket and female couplers. Non detent, spring centering. Mounts on the lift cover (under the seat). Some seat brackets may have to be modified for clearance. Use with 8010-4 male plugs for the couplers (not included). Will not fit compact tractors. Will NOT fit NAA, Jubilee, Golden Jubilee (bolt pattern is different). 3/8 inch BSP threaded hoses. Replaces 309973, 309973F, 309996, 80309973, 83928704, 83944762, C9NNB950B, E1NNB950BA, E1NNB950BB (Item #: 168679, Ref: E1NNB950BB) $570.00

Drive Gear Shroud, Hydraulic Pump - For tractor models (3000, 340, 3900, 4000, 4100, 4140, 4190, 420, 4200, 4330, 4340, 4400, 4410, 445, 4500, 4600, 460NO, 4600SU, 515, 532, 540, 545 all with independant PTO). (Item #: 172659, Ref: C5NNN872A) $34.60

Hydraulic Fluid Filler Cap - Hydraulic Fluid Filler Cap is used on the following Ford equipment, 1965 and later: 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, 8000, 9000, 8600, 9600, 9700, TW5, TW10, TW15, TW20, TW25, TW30, TW35, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 655, 655A, 655B, 655C, 655D. 1 3/8 inch thread. Replaces C5NNN901A, 81802102 (Item #: 163813, Ref: C5NNN901A) $9.70

Hydraulic Lift Rocker Bushing - Used on Ford models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 2600, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3600, 4000, 4110, 4140, 4600SU, 231, 233, 333, 334, 340, 340A, 340B, 445, 445A, 450, 531, 540, 540A, 540B, 545, 545A, 3500. This part has an OD of 1 inch, and ID of 3/4 inch and is 3.9 inches long. Replaces 81800791, 83937249, E66GF9, E1NNB681AA (Item #: 166271) $30.60

Hydraulic Lift Rocker Pin - This pin is used with C7NN535B, C7NN535C and E0NN535AA Top Link Rockers. The pin is number 4 in the image. Used on Ford 3500, 2000, 2100, 2110, 2120, 2150 1/70-12/74, U.K. Only, 330A, 2300, 231, 2310, 233, 2600, 2600N, 2600R, 2600V, 2610, 2610V, 3000, 333, 334, 335, 3600, 3600N, 3600R, 3600V, 3610V, 4000, 4110, 4600SU, 531 (Item #: 189212) $26.81

Hydraulic Pump Piston - Hydraulic pump piston with and diameter of 9/16. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models. Replaces 81801695 and C0NN882B. For models: 2000 3 cylinder, 2150, 2300, 2600, 2600V, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 4000 3 cylinder, 4000SU, 4100, 4190, 4200, 4330, 4340, 4410, 4600, 4600SU. (Item #: 184020, Ref: C5NN615A) $13.50

Hydraulic Pump Piston - Hydraulic pump piston with an diameter of 5/8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000. (Item #: 184993, Ref: NCA615C) $10.60

Hydraulic Pump Repair Kit - Major repair kit for engine mounted pumps: C5NN600AA, C7NN600Y, C5KNN600AB, C7NN600Z all 1965 and up. D477600C and D6NN600A both 1975 and up. (Item #: 107998, Ref: CKPN600A) $35.00

Hydraulic Pump Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Item #: 178969, Ref: C0NN858A) $48.21

Remote Control Kit - Single Spool, Single/Double Acting with Hoses - Female Couplers. This valve is spring loaded to neutral.For models: Ford up to 1965: 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. After 1965: 2000, 3000, 4000, 2600, 3600, 3900, 4100, 4600, 2310, 2610, 2810, 2910, 3610, 4110, 4610, 3230, 3430, 3930, 4630 (Item #: 154875, Ref: S.68981) $280.00

Lights

Headlight Reinforcement Plate - Fits Ford tractors from 1939 and up. (Item #: 111329, Ref: FAA13102A) $6.10

LED Lamp, 12 Volt - This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Item #: 127096, Ref: L4411LED) $35.00

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Used with flat top fenders. Replaces: L4411, 277073, 312555, 80277073. (Item #: 111241, Ref: 373662R91) $9.10

Light Switch, Rotary Type - This Rotary Type Light Switch is used on many Ford/New Holland models 1965 and later. It replaces original part numbers C5NN11654A, C5NN11654D, C7NN11654B, C7NN11654C, D5NN11654B, E7NN11654AA, 83959708, D10026500, 83959708, 81818781, 81818408, 83905863. (Item #: 121197, Ref: E7NN11654AA) $13.10

Sealed Beam Bulb - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $27.40

Stop Light Switch - For Ford tractor models TW5, TW15, TW25, TW35, 2000, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3230, 3300, 3310, 3330, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4110, 4130, 4140, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4630, 4830, 5000, 5030, 5110, 5340, 5600, 5610, 5610S, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7810S, 7910, 8210, 8530, 8630, 8730, 8830, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 535 Replaces Ford OEM number D3NN13480A, , Compatible with New Holland tractor models TS90, TS100, TS110, 3010S, 6610S, 6810S, 7610S, Replaces New Holland OEM number 81834441, (Item #: 160571) $12.40

Tail Light - This is a Duolamp Tail Light and Bracket Assembly used on Ford Tractors 1958 and later. Fits models: 340A, 420, 445, 445A, 501, 535, 540A, 540B, 545, 601, 701, 801, 901, 1801. Replaces: 310064, 86633401, 86639447, C5NN13403A, D2NN13403A. (Item #: 125323, Ref: 310064) $63.00

$Ford 4600SU Tail Light \ Dash Light Bulb - 12-Volt$
Tail Light / Dash Light Bulb - 12-Volt - This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Item #: 150699, Ref: TLBULB12V) $1.70

Miscellaneous

No
Picture
Ford Shift Fork, Used - For Ford tractor models Super Dexta, 2000, 2100, 2110, 2120, 2300, 2310, 2600 (N, R, V), 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 3600 (N, NO, R, V), 3610 (NO, V), 3900, 3910 (H, N, R, V), 4000, 4100, 4110 (N, NO, O, V), 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600 (NO, O, ), 4600SU, 4610 (N, NO, O, V), 4610SU, 4630, 6610, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 455, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 655, 655A, Replaces Ford OEM nos C7NN7N515K, 81820878, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 447661) $90.01

No
Picture
Hydraulic Lever Assembly - For Ford tractor models 2310, 2600, 2610, 2810, 2910, 3230, 3600, 3610, 3900, 3910, 3930, 4100, 4110, 4130, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 250C, 260C, 333, 334, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 450, 455C, 455D, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, Replaces Ford OEM number D4NNB503B, F1NN4211AA, D4NNB503A, 83902050, 83902196, Lever Assembly, (Item #: 170557) $83.00

Oil System

Oil Filter, Spin-On - Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10/1969. For use with spin on filter adapter 309825. (40538S)Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Item #: 118399, Ref: E7NN6714AA) $14.50

PTO / Driveline

PTO Clutch Plate, External Splines - This Disc is used in tractors with Independent PTOs. It measures 5.47 inches Major/ 5.278 inches Minor Outside Diameter, 3.91 inches Inside Diameter, 0.070 inches Width, 54 Teeth. 1P77518A, 83918314, C8AP7B442A, P77573A1, T100680, V32773200 (Item #: 155469, Ref: C8AP7B442A) $4.90

PTO Shaft - This PTO Shaft fits multiple Ford Tractors and industrial Models with Independent PTO. PTO shaft is 30.625 inches long, 26 tooth splines. Uses Sleeve E7NN797BA and Seal D9NN703BB (not included). It replaces D8NN725AB, 83937198. (Item #: 163804, Ref: D8NN725AB) $258.00

Sheet Metal / Body Parts

Bumper - This is a new aftermarket style Bumper. It has a trailer hitch. Comes primer coated. Used on NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (1962-1964), 3000, 4000SU, 2600, 3600, 4100, 4600SU, 2610, 3610, 4110, 4610SU. (Item #: 113512, Ref: S.60709) $131.00

Fender - This Fender comes as pictured with mounting bracket and is 25 1/2 inches tall. Fits left hand or right hand side on the following tractors: 501, 600, 601, 700, 701, 800, 801, 900, 901, (except hi-clear), 2000, 4000 (1958 thru 1964), 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 531, 532, 535 (1975 to 1981); 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 230A, 530A (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces 81816643, C5NN16312AK, C5NN16312AU, C5NN16321AK, D5NN16312LR. (Item #: 104070, Ref: D5NN16312LR) $127.00

Fender - This Fender Skin, (bracket not included) measures about 21.5 inches by 42.5 inches. Replaces right hand or left hand side. For tractor models 2000, 2600, 2610, 3000, 340A, 3600, 3610, 4000SU, 420, 445A, 4500, 4600SU, 535, 540A, 540B, 545, 600, 800, Jubilee, NAA. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 155688, Ref: E1NN16315DA) $79.00

Fender, LH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 105559, Ref: E5NN16313DA) $217.00

Fender, RH - Flat Top. For tractor models 2600, 2610, 2810, 2910, 335, 3600, 3610, 3910, 3930, 4100, 4110, 420, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, 515, 532, 535, 5600, 5610, 6600, 6610, 7600, 7610. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 105558, Ref: D8NN16312ABB) $251.00

Fender With Bracket, Scripted - Rear Fender with mounting bracket measures 25 1/2 inches tall. Has "FORD" script raised on the metal. ADDITIONAL $35 SHIPPING DUE TO SIZE AND WEIGHT. Fits LH or RH side. For tractor models 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (except high clearance), 2000 and 4000 (1958 to 1964); 2000, 3000, 4100, 4110, 4200 (1965 to 1975); 2600, 3600, 4100, 4600SU, 231, 335, 420, 515, 532, 535, (1975 to 1981); 2310, 2910, 3610, 3910, 4110, 4610, 230A, 530A, (1981 to 1990). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104072, Ref: D5NN16312LRS) $182.00

Front Shell - No side hole for air cleaner. 2 PIECE GRILL WILL NOT FIT. Uses 1 piece grill part # D5NN8200A. For DIESEL models (2000, 3000, 4000SU use grill S.60623) or (S.60623M CURRENTLY UNAVAILABLE FROM YESTERDAYS TRACTORS), 2600, 3600, 4600SU, 3900, 4100, 2110LCG, 4110LCG, 231, 233, 333. NOTES: Fit to tractor before painting. Can be used for GAS if you cut air cleaner tube hole on inside panel. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 160777, Ref: D4NN8N202C) $303.00

Front Shell, with Side Hole for Air Cleaner - For tractor models 2000, 3000, 4000SU, 2600, 3600, 4600SU, 3900, 4100, 2110LCG, 4110LCG, 231, 233, (333 diesel). Will work on gas models with some modification. Uses grill D5NN8200A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces D4NN8N202E, D5NN8N202AA (Item #: 152171, Ref: S.61627) $301.00

Grill Screen - Metal Grill Screen for 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532. One piece plastic construction like original. Grill screw clips (2 needed on most applications) available as S.60436. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 104063, Ref: D5NN8200A-OEM) $35.50

Grill Screen Clip - For tractor models 2000, 2600, 3000, 3600, 4100, 4140, 4600, 4600SU, 5200, 5600, 5900, 6600, 7200, 7600, 231, 531, 532 (2 needed on most applications). Please verify quantity needed from your tractor. Replaces 45264S2, C9NN8B151B, D4NN8N213A, 83901581 (Item #: 118786, Ref: S.60436) $6.10

Hood Prop Rod - This hood prop rod is 17 1/2 inches and used on 2000, 3000, 4000, 4000SU, 5000, 7000, 2600, 3600, 4600, 4600SU, 5600, 6600, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU, 5610, 6610, 7610, 7810, 5900, 231, 335, 531, 340, 540, 3400, 3500, 445, 4500, 250C, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 540, 540A, 540B, 545, 545A, 545C, 545D. It Replaces original part number C7NN8042A. (Item #: 178161, Ref: C7NN8042A) $9.22

Rubber Hood Pads - For all models after 1965 with Front Cowling that surrounds the Grill/Radiator. These rubber pads fit onto cowling under hood. Models: 231, 233, 333, 515, 2000, 2600, 3000, 3600, 3900, 4000, 4100, 4110, 4600, 4600SU, 5000, 5600, 6600, 7000. Replaces C5NN16N655B, C5NN16N655A. (Item #: 113797, Ref: C5NN16N655B) $1.20

Steering

Axle Knee Left Hand - This is a Left Side Axle Knee which is used on Ford 2600, 3600, 4600SU, 2310, 2610, 2810, 2910, 3610, 3910, 4610, 231, 335, 531. It is used with spindles having a 1.464 inch lower bushing diameter. It replaces original part numbers D4NN3007B, E0NN3007BA, 83902613 (Item #: 153972, Ref: E0NN3007BA) $222.00

Axle Knee, Right Hand - This is a Right Side Axle Knee which is used on Ford 2600, 3600, 4600SU, 2310, 2610, 2810, 2910, 3610, 3910, 4610, 231, 335, 531. It is used with spindles having a 1.464 inch lower bushing diameter. It replaces original part numbers D4NN3006B, E0NN3006BA, 83902614. (Item #: 153971, Ref: E0NN3006BA) $227.00

Axle Pin Bushing - This Front Axle Pin Bushing has 2.19 inch outside diameter, 2.05 inch inside diameter, 1.5 inch. Fits models: 230A, 231, 233, 234, 334, 335, 530A, 531, 2000, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 3600, 3610, 3900, 3910, 4100, 4110, 4140, 4600SU, 4610. Replaces C7NN3153B, 81822712, C7NN3153BGV. (Item #: 153458, Ref: C7NN3153B) $4.20

Axle Support - Front Axle Center Support. For tractor models 2000, 2100, 2110, 230A, 231, 234, 2600, 2610, 2910, 3000, 3100, 333, 334, 335, 3600, 3900, 3910, 4100, 4110, 4140, 4600SU, 530A, 531. Item weighs 52 lbs. (Item #: 111993, Ref: C7NN3010F) $194.00

Bearing, Upper - This is the Upper Bearing used with D9NN3N748AA Power Steering Adapter. FORD 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981 to 9/1984), 3400, 231, 335, 531, 532 Replaces C5NN3N657A, 168109, B2012, BA2012. (Item #: 179317, Ref: C5NN3N657A) $12.80

Drag Link End - End, Rear, Left Hand, 28.125 inch tube length, for Drag Link with Power Steering. (2000, 3000 1965 to 1975), 2600, 3600, 4100 (1975 to 1981, less cab), 2610, 3610, 4110 (1981 to 9/1984). Replaces C3NN3308E, C5NN3306E, C5NN3308E, 81802895. (Item #: 104590, Ref: C5NN3308E) $116.00

Front Axle Support - For tractor models 2000, 3000, 4000SU after 8/1970, 2600, 3600, 3900, 4100, 4600SU, 231, 531 after 1975, 2610, 3610, 3910, 4110, 4610SU. (Item #: 155729, Ref: D3NN3A042D) $465.00

Lock Nut - Steering Gear Bearing Lock Nut. 1 inch 16 thread. Used on 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532, MAY ALSO FIT 600, 800, 601, 801, 2000-4000 4 Cylinder. (Item #: 172916, Ref: C5NN3707A) $10.80

O-Ring - O-Ring. For Power Steering Valve Assembly. 2000, 3000, 4000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU 1/1981-9/1984, 3400, 231, 335, 531, 532 Replaces 87150S94, 1751687M1. (Item #: 178148, Ref: 87150S94) $1.70

No
Picture
Planetary Gear - For Ford tractor models 2310, 2810, 2910, 3055, 3230, 3430, 3550, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 4140, 4190, 4200, 4330, 4340, 4400, 4410, 4500, 4600, 4600SU, 4610, 4610SU, 4630, 4830, 5030, Compatible with Ford Construction and industrial models 250C, 260C, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 515, 532, 535, 540, 540A, 540B, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575D, 575E, 655, 655A, 655C, 655D, 675D, 675E Replaces Ford OEM number 86584272, 81803330, , Compatible with New Holland tractor models TV140, TV145, TV6070, Compatible with New Holland Construction and industrial models B95, B95LR, B95TC, B110, B110B, LB75, LB75B, LB90, LB90B, LB110, LB110B, Replaces New Holland OEM number 86584272, (Item #: 176413) $89.00

Power Steering Block - Gear Adapter Block For 2000, 3000, 4000SU, 2600, 3600, 3900, 4600SU, (2310, 2610, 2910, 3610, 3910, 4610SU 1981-9/1984). (S.61625) Replaces D9NN3N748AA, 86570855. Comes with bearing and seal installed. Does not come with O-Rings which we do not have available. (Item #: 178747, Ref: D9NN3N748AA) $234.15

Power Steering Cylinder - Power Steering Cylinder is 14 1/4 inches long with 1/2 inch diameter rod, 7/16 inch diameter threaded outer end. For 2000, 230A, 231, 234, 2600, 3000, 334, 3600, 4000, 530A, 531, 601, 801 and others. Comes with cylinder end ball joint E2NN3A540BJ. Rod end ball joint for 1965 and later sold separately as part number C5NN3A302B. Rod side ball joint for 1964 and earlier is not available. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. Replaces E2NN3A540A, E2NN3A540BA, E2NN3D547AA, 83955791. (Item #: 121884, Ref: E2NN3A540BA) $220.00

Power Steering Cylinder - This Power Steering Cylinder has 5/8 inch diameter rod, 7/16 inch diameter threaded end. Replaces original part numbers D4NN3A540A (right hand) and D4NN3A547A (left hand). Rod end ball joint sold separately as part number C5NN3A302B. Used on 2000, 2100, 2110, 2120 COMPACT TRACTOR, 2150, 230A, 231, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3120, 3150, 3330, 335, 3400, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4600SU, 4610SU, 530A, 531, 532 SQUARE BALER, 601, 801. OEM numbers D4NN3A540A, D4NN3D574A, E9NN3A540AA. (Item #: 121885, Ref: D4NN3A540A) $220.00

$Ford 4600SU Power Steering Cylinder - 1\2$
Power Steering Cylinder - 1/2 - For Ford tractor models 601, 611, 621, 631, 641, 661, 671, 681, 801, 811, 821, 841, 851, 861, 871, 881, 2000, 2110, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610, 4610SU, Compatible with Ford Construction and industrial models 230A, 231, 234, 334, 335, 530A, 531, 532, Replaces Ford OEM number E4NN3A547AA, E4NN3A540AA, Rod Diameter: 1/2", Thread: 7/16", 1/4" JIC Male Fittings, For use as left hand or right hand side, Do not mix rod sizes on tractor, For Tie Rod End use Item #: 104710, (Item #: 118803) $270.00

Power Steering Cylinder Seal Kit - For original equipment with 1/2 inch rod. Fits multiple Ford Tractors using original E2NN3A540BA and E2NN3D547AA cylinders. Models: 600, 601, 800, 801, 2000, 3000, 4000. Replaces Ford repair kit number CAPN3301B. Contains one each of the following: AJ33656A, C1AA3A752A, C0AA3A753A, C1AA3A751A, 371033S. Verify your original equipment manufacturer cylinder part number before order. Replaces 87045114, CAPN3301B. Note, this kit may arrive with more parts than shown. These other parts are used on non-tractor applications and can be disregarded. (Item #: 155447, Ref: CAPN3301B) $23.70

Power Steering Cylinder Shaft - Replacement power steering cylinder 1/2 inch rod for E2NN3A540BA after market replacement cylinders. (Item #: 179251, Ref: ALX3008) $108.00

Power Steering Gear Bearing and Races - These Bearing and Races are used on the Steering Worm Shaft on power steering models; 2000, 3000, 4000SU, 3400, 4110, 4400, 2600, 3600, 3900, 4100, 4600SU, 2610, 3610, 3910, 230A, 530A (1965-84). Also used on Ford 4 Cylinder 1955-1964. Replaces LA33586A (Item #: 170142, Ref: LA33586A) $48.70

No
Picture
Power Steering Hydraulic Pump - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number D7NN3A674B, E6NN3K514DA, 83959532, Front inlet hole size: 9/16" UNF, Front outlet hole size: 5/8" UNF, Inner maximum liters per minute: 12.5, Inner maximum gallon per minute: 2.75, Top hole spacing: 107, (Item #: 170931) $497.60

Power Steering Pump - This Power Steering Pump replaces pumps with an internal Relief Valve (will not replace external relief valve. For 3500, 3550 5/1970 and up, 5100, 7100 7/1970 and up, 4100 4/1970 and up, 4600, 5600, 6600, 7600 5/1981 and up, 5610, 6610, 7610 4/1985 and up. Power Steering Pump with reservoir. Pressure relief valves set at 1100 PSI, 2.74 GPM. This pump can replace: 83949432, E6NN3K514DA. 2000, 3000 10/1968 and up, 2600, 3600, 4100, 2610, 3610, 4110 less cab, 83959550 - E6NN3K514CA. 4000 (10/1968-3/1970), 2600, 3600, 4110 with cab. Fits others replacing the following OEM numbers: D8NN3K514GA, D8NN3K514GB, D8NN3K514GC, E6NN3K514EA, 83917191, 83923736, 83924995, 83959533, 87759440, A709527 (Item #: 113209, Ref: E6NN3K514EA) $170.00

Power Steering Pump - Dynamatic, E6NN3K514EA99M, E6NN3K514EA - For Ford tractor models 2000 (1/65-12/74), 2100 (3/65-12/74), 2110 (1/65-12/74), 2600 (1/75-12/81), 2600 (N, R (1/75-12/81), 2600 (V (10/75-9/76), 3000 (1/65-12/74), 3100 (1/65-12/74), 3400 (1/65-9/75), 3600 (1/75-12/81), 3600 (N, R (1/75-12/81), 3600 (NO, V (1/75-12/81), 3600 (R (1/75-12/77), 3900 (1/75-12/81), 4000 (1/65-12/74), 4100 (1/65-12/74), 4100 (1/75-12/81), 4110 (1/65-12/74), 4410 (1/69-12/74), 4600 (1/75-12/81), 4600 (O (1/75-12/81), 4600SU (1/75-12/81), 5000 (1/65-1/75), 5100 (1/65-12/74), 5200 (1/67-12/74), 5340 (6/68-12/74), 5600 (1/75-12/81), 5700 (7/78-9/80), 6600 (1/75-12/81), 6600 (O (1/75-12/81), 6600 (C (1/75-9/76), 6700 (1/75-12/80), 7000 (10/71-12/74), 7100 (10/71-12/74), 7200 (10/71-12/74), 7600 (1/75-12/81), 7600 (C (1/75-9/76), 7700 (1/75-12/80), Compatible with Ford Construction and industrial models 231 (1/75-12/81), 233 (1/75-12/81), 333 (1/75-12/81), 420 (10/75-9/78), 515 (10/75-9/78), 531 (1/75-12/81), 532 (10/75-9/78), 3500 (1/65-12/74), 3550 (1/65-12/74), 4400 (1/65-12/74), Replaces Ford OEM number E6NN3K514EA99M, E6NN3K514EA, 81822403, 83911577, 83917191, 83923736, 83924995, 83959533, 87759440, C9NN3A674D, D7NN3A674C, D8NN3K514GA, D8NN3K514GB, D8NN3K574GA, D8NN3K514GC, Replaces manufacturer number 002165, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157712) $498.00

No
Picture
Power Steering Pump, Used - For Ford tractor models 2000, 2100, 2110, 2120, 2150, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3150, 3400, 3500, 3550, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4410, 4600, 4600SU, 4610, 4610SU, 5000, 5100, 5200, 5600, 5700, 6600, 6700, 7000, 7100, 7200, 7600, 7700, Compatible with Ford Construction and industrial models 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, Replaces Ford OEM number E6NN3K514DA, 83959532, Replaces Ford Casting nos C7NN3K514A, For a new version of this item use Item #: 170931, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457518) $291.01

Power Steering Radius Rod - Left Hand - For Ford tractor models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 4000SU, 4600SU, 4610, Compatible with Ford Construction and industrial models 231, 335, 531, Replaces Ford OEM number C7NN3A292B, Fits Left Hand Side, 39-1/2" Long, For Power Steering Radius Rod - Right Hand use Item #: 164110, (Item #: 164109) $163.00

Power Steering Shaft and Ball Nut Assembly After 1964 - Fits 2000, 3000, 4000SU, 2600, 3600, 4100, 4600SU, (2310, 2610, 2910, 3610, 3910, 4110, 4610SU ALL UP TO 9/1984), INDUSTRIALS: 230A, 231, 234, 2110LCG, 334, 335, 3400, 4110LCG, (530A UP TO 9/1984), 531, 532. 26 9/16 inches long. (Item #: 161863, Ref: D6NN3A710A) $270.00

Power Steering Valve Assembly - For tractor models 2000, 3000, 4000SU, 2600, 3600, 3900, 4100, 4600SU, (2310, 2610, 2910, 3610, 4110, 4610SU >9/1984), 2110LCG, 3400, 230A, (231 > 9/1984), 334, 335, 530A, 531, 532. NOTE: If your old valve is 6 plunger, 3 springs, this is an improved version with 8 plungers and 4 springs. YOU MUST remove the check valve from old steering unit with a straight screwdriver and install in the new valve. (Item #: 178679, Ref: C5NN3A730B) $544.00

Radius Rod Assembly - Right or left hand, measures 38 inches from Socket center to clevis hole center. For tractor models (2600, 3600, 3900, 4600SU, 4100 all 1/1975 and up L/cab with power steering), (2610, 2910, 3610, 3910, 4610SU all 1-1981 to 9/1984 L/cab with power steering), (2000, 2100, 2110, 3000, 3100, 4000, 4110, 4140 all 8/1970 and up with power steering). Replaces 81822714, 87764155, C7NN3A292B, D2NN3A292A, 82847577. (Item #: 164110, Ref: C7NN3405B) $145.00

Radius Rod, Ball Socket - For tractor models: Jubilee, NAA, 2000 3 cylinder, 2000 4 cylinder, 600, 601, 800, 801, 1811, 1821, 1841, 1871, 1881, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2600V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 4000 3 cylinder, 4000 4 cylinder, 4030, 4100, 4110, 4120, 4121, 4130, 4140, 4410, 4600SU, 8N, 9N, 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 3400, Dexta, Super Dexta. Replaces: 9N3442, E0NN3N442BA, C5NN3N442C, C5NN3N442A, GL139. (Item #: 115083, Ref: E0NN3N442BA) $18.60

Radius Rod, Socket Cap - Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Item #: 108088, Ref: E0NN3N406BA) $10.10

Reservoir Cap, Power Steering Pump - Used on E6NN3K514EA, D8NN3K514GC, C9NN3A674D Power Steering Pumps. For tractor models 231, 233, 2600, (3500, 3550 5/1970 to 1975), 3600, (4100 4/1970 to 1975), (420, 4600, 5600, 6600, 7600 1975 to 1981), 4600SU, (5100, 7100 7/1970 to 1975) and others. (Item #: 121241, Ref: D2NN3A006B) $3.70

Seal, Lower - This is the Lower Seal used with D9NN3N748AA Adapter. Measures 1 3.4 inches outside diameter and 1 3/16 inches inside diameter. For models 2000, 3000, 4000SU, 2600, 3600, 4600SU, 2310, 2610, 2910, 3610, 3910, 4610SU (1/1981-9/1984), 3400, 231, 335, 531, 532. Replaces 86531349, 81803245, C5NN3N739A. (Item #: 178159, Ref: C5NN3N739A) $14.60

Sector Shaft Seal - This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Item #: 124153, Ref: C5NN3C615A) $5.30

Sector Shaft Seal - This Sector Shaft Seal measures 1.125 inches inside diameter, 1.5 inches outside diameter, 0.245 inches Thick. It is used on some of the following 2000, 3000, 4000SU, 2600, 3600, 4600SU, 3400, 231, 335, 531, 2310, 2610, 2810, 2910, 3610, 3910, 4610SU. Verify measurements or OEM number before ordering. More than one size was used. Replaces D6NN3C615A, 83909346 (Item #: 170128, Ref: D6NN3C615A) $9.50

Spindle Bushing - FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Item #: 100617, Ref: 2N3109) $4.00

No
Picture
Spindle Bushing - For tractor models 2000 (4-cylinder, 1962-1964), 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2600V, 2610, 2810, 2910, 3000, 3055, 3110, 3120, 3150, 3300, 3310, 333, 3330, 334, 335, 3600, 3600V, 3610, 3900, 3910, 4000 (4-cylinder, 1962-1964), 4110, 4120, 4140, 4600SU, 530A, 531, 541, 600, 601 Series, 800, 801 Series, Dexta, Super Dexta. Measures 1.352 inch inside diameter, 1.474 inch outside diameter and 1.490 inch length. Also replaces 81717392, 83928345 and 957E3110B. (Item #: 100632, Ref: NCA3110A) $4.30

Spindle Bushing Kit - Spindle Bushing Kit contains: 2 upper bushings part number 2N3109 and 2 lower bushings part number NCA3110A. For tractor models 2000, 2600, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 900, Dexta, Super Dexta. (Item #: 182515, Ref: SBK5364) $25.10

Spindle - LH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104535, Ref: E9NN3106BA) $277.00

Spindle, LH - This spindle is for tractor models 4600, 4600SU, 4610. The spindle is Keyed and measures 12.25 inches in length, has a diameter of 1.46 inches and axle is 1.37 inches on the Inner axle and .750 inches on the Outer axle. Spindle for diesel and gas applications. The wheel bearing kit used for this spindle is part number EHPN1200C. (Item #: 100637, Ref: D4NN3106A) $77.00

Spindle, LH - This left side spindle has a vertical shaft that is 11.687 inches tall, 1.25 inches diameter at the top, 1.340 inches diameter at the bottom, 1.25 inches at inner bearing, and .75 inches at outer bearing. 5/16 inch x 1-3/8 inch keyway. For tractor models (2000 1965-1975 except vineyard), 2600, 3000, 3600, 3900, 4100, 4600SU. Replaces F2NN3106AA. Uses bushing kit SBK5364. The wheel bearing kit used for this spindle is part number FW93WS. (Item #: 100625, Ref: C5NN3106R) $40.00

Spindle Nut - Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Item #: 156038, Ref: 387930S36) $1.10

Spindle - RH - Used on Low-Clearance, Orchard, Vineyard and some 2WD industrial models, the dimensions on the spindle are A: 8.625 inches, B: 1.464 inches, C: 1.375 inches, 0.750 inches. The keyway is located at 9 o'clock. The following associated parts are sold separately: C5NN3A299A Thrust Bearing, C5NN3110B Spindle Bushing (2 used), C9NN1104E Front Wheel Hub, EHPN1200C Wheel Bearing Kit. (Item #: 104534, Ref: E9NN3105BA) $270.00

Spindle, RH - This spindle measures A= 11.687 inches, B= 1.250 inches, C= 1.340 inches, D= 1.250 inches, E= .750 inches. For tractor models (2000 1965-1975 except vineyard), 2600, 3000, 3600, 3900, 4100, 4600SU. Replaces F2NN3105AA. Uses bushing kit SBK5364. The wheel bearing kit used for this spindle is part number WBKFD4. (Item #: 100624, Ref: C5NN3105U) $50.00

Spindle Thrust Bearing - Thrust Bearing for Spindle measures 1.345 inch inside diameter, 2.2 inch outside diameter, and width of .622 inch. For tractor models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Item #: 100623, Ref: C0NN3123B) $5.40

Steering Arm - Spindle steering arm, for manual and power steering models: 2000, 230, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610SU, 530, 530A, 531, 600, 601, 800, 801, 8N, Dexta, Jubilee, NAA, Super Dexta. Steering Arm replaces 310799, 81811668, 8N3130B, 957E3130 (Item #: 104731, Ref: 310799) $39.10

Steering Box Drop Arm - This Steering Box Drop (Pitman) Arm is used on many Ford Agricultural and Industrial models built 1965 and later. It replaces original part numbers 81803156, C5NN3590F. Verify part numbers before ordering. (Item #: 165024, Ref: C5NN3590F) $39.00

Steering Gear Side Cover O-Ring - This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Item #: 124504, Ref: 8N3581B) $1.30

Steering Sector Shaft - For both Manual or Power Steering Applications Single Gear containing five teeth. For tractor models 2000, 2100, 2110, 2120, 2150, 2300, 230A, 231, 2310, 233, 234, 2600, 2610, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 334, 3400, 3500, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4140, 4400, 4600SU, 4610SU, 530A, 531, 532, 3350. Replaces C5NN3N575A. (Item #: 116896, Ref: C7NN3N575A) $190.20

Steering Sector Shaft Seal - Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Item #: 124494, Ref: 8N3586) $2.20

Steering Shaft Bushing - Bushing assembly, upper consists of a rubber splined piece with a metal bushing. Fits many Ford Tractors 1965 and up, with manual and power steering. Replaces C5NN3517A, 81811803, 83903807, D5NN3517A (Item #: 114044, Ref: C5NN3517A) $6.30

Steering Shaft Repair Kit - Repair kit for Steering Shaft. Services shafts where upper oil seal has worn a groove into shaft causing oil to leak from upper housing. For 2-WD Models: 600, 640, 611, 621, 631, 641, 651, 671, 800, 840, 801, 811, 821, 831, 841, 851, 861, 871. 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140 (1965-1975); 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or without cab 1975-3/1976; without cab 4/1976-1981); 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (without cab 1981-9/1984). (Item #: 173253, Ref: SRK632AA) $52.00

Steering Shaft Seal - This Steering Shaft Seal is for 2-wheel drive models steering box with 2 arms. Goes in the base of the steering shaft. It measures 1.386 inch outside diameter, 0.866 inch inside diameter and 0.374 inch in width. Tractors: 2100, 2110, 2120, 2150, 3055, 3100, 3120, 3150, 3400, 4110, 4140, 4410 (1965-1975), 2600, 3600, 3900, 4100, 4600SU, 335, 532 (with or w/o cab, 1975-3/1976; w/o cab 4/1976-1981), 2310, 2610, 2910, 3610, 3910, 3910SU, 4110SU, 4610SU, 230A, 234, 334, 530A (w/o cab 1981-9/1984). Replaces D5NN3N632A, E1NN3N632AA and 83929295. (Item #: 164336, Ref: E1NN3N632AA) $9.94

Tie Rod End - This Tie Rod End is used on Carraro MFWD front ends. It measures 3.75 inches from the center of the ball joint to the end of the shaft. It has M22 x 1.5 Right Hand Thread. Replaces K965270, CAR98854, 98854, 48084970, 83930053, 80691 (Item #: 104470) $42.80

Tie Rod End - For Ford tractor models 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 250C, 260C, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 655, 655A, 655C, 655D, 675D Replaces Ford OEM number CAR87031, 83930617, , Compatible with Massey Ferguson Construction and industrial models 25 (with Carraro 4WD), 40E (with Carraro 4WD), 50E (with Carraro 4WD), 50H (with Carraro 4WD), 50H, 50HX (with Carraro 4WD), 50HX, 60H (with Carraro 4WD), 60H, 6500H (with Carraro 4WD), 6800H (with Carraro 4WD), Replaces Massey Ferguson OEM number 3475543M91, Replaces Carraro manufacturer number 87031, 4.250", M24 X 1.5 RH Thread, For left hand use Item #: 105037, (Item #: 128330) $61.00

No
Picture
Tie Rod End, Carraro - Left Hand - For Ford tractor models 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 250C, 260C, 345, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655A, 655C, 655D, 675, 675D (all with FWD), Replaces Ford OEM number 83930620, CAR87031, 83930617, CAR88759, Replaces Carraro manufacturer number 87031, 88759, Fits Left Hand Side, Length 4.160", M24 x 1.5 Left Hand Thread, Manufactured by Carraro to exact OEM specifications, For an economy version use Item #: 104703, (Item #: 159935) $114.00

Tie Rod End, Economy - Left Hand - For Ford tractor models 4600, 4600SU, 4610, Compatible with Ford Construction and industrial models 250C, 260C, 345, 345C, 345D, 445, 445A, 445C, 445D, 450, 455, 455C, 455D, 545, 545A, 545C, 545D, 550, 555, 555A, 555B, 555C, 555D, 575, 575D, 655, 655A, 655C, 655D, 675, 675D (all with FWD), Replaces Ford OEM number 83930620, CAR87031, 83930617, CAR41447, CAR88759, Replaces Carraro manufacturer number 88759, 87031, Fits Left Hand Side, Length 4.160", M24 x 1.5 Left Hand Thread, For Carraro Version use Item #: 159935, (Item #: 104703) $43.30

Tie Rod End - Left Hand - This Tie Rod End is used on Carraro MFWD front ends. It measures 3.75 inches from the center of the ball joint to the end of the shaft. It has M22 x 1.5 Left Hand Thread. 83930054, CAR98855, K965269, 48084969, 80694, 98855 (Item #: 104471) $82.57

Tie Rod Outer - Tie Rod End, left hand, 19.00 inches by 3/4 inch diameter, for manual or power steering equipped tractors. Left hand and right hand 1965 to 5/1967; Left hand only 6 of 1967 to 1975. Tie Rod End for diesel and gas applications. For 4000, 4600, 4610. (Item #: 100677, Ref: C5NN3278A) $23.50

Wheels

Front Hub Kit - Used on many Ford models, 1955 and later, this Front Hub Kit contains 1 of 957E1139 dust cap, 1 of EHPN1200C wheel bearing kit, 6 of C5NN1012B wheel nuts, 6 of C5NN1107F wheel studs, and 1 of C9NN1104E hub. Verify part numbers. Many of the models listed used more than one front hup configuration. Ford 2000, 2100, 2120, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3055, 3230, 334, 335, 3600, 3610, 3610V, 3910, 3930, 4000, 4100, 4110, 4120, 4130, 4190, 4200, 4410SU, 4600, 4600NO, 4600O, 4600SU, 4610, 4610N, 4610NO, 4610O, 4610SU, 4630, 4630N, 4630NO, 4630O, 4830, 4830N, 5030, 600, 601, 800, 801 (Item #: 113373, Ref: C9NN1104EKIT) $75.00

No
Picture
Front Hub Oil Seal - For Ford tractor models 501, 611, 620, 621, 631, 641, 651, 2000, 2111, 2120, 2310, 2610, 2810, 2910, 3230, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4120, 4130, 4190, 4200, 4600, 4600SU, 4610, 4630, 4830, 5030 Replaces Ford OEM number 310195, 81809444, , Compatible with John Deere tractor models 1830, Replaces manufacturer number VPJ1410, Inside Diameter: 1.811", Outside Diameter: 2.638", Width: .433", (Item #: 173786) $5.50

Front Rim, 6 x 15 - Our new 6 x 15, 6 Lug Front Wheel has 4 weight holes. This inside diameter pilot hole is 4.625 inches, Bolt holes are on a 6 inch circle. Fits 6.00 thru 7.50 x 15 tires. The Backspacing is 4.75 inches. Primer paint finish. Replaces OEM part numbers 104971A, 1611405M91, 371735R3, 505249M91, 82006576, A36743, C5NN1007D, F1NN1007BA, G57007, JD1091. Additional $15 shipping due to weight. (Item #: 103764, Ref: FW60156) $104.00

Front Wheel Bearing Kit - Front Wheel Bearing. For tractor models 230, 230A, 2310, 234, 2610, 2610V, 2810, 2910, 3230, 334, 335, 3430, 3600, 3610, 3610V, 3910, 3910V, 3930, 3930N, 4000, 4100, 4110, 4130, 4130N, 4190, 4200, 4600, 4600SU, 4610, 4610N, 4610SU, 4630, 4630N, 4830, 5030, 530, 530A, 532. Fits hub C9NN1104E. Contains one each: Bearing LM48548-BP, Cup LM48510-BP, Bearing LM11949-BP, Cup LM11910-BP, Seal 310195. FW94WS (Item #: 100655, Ref: EHPN1200C) $20.00

Front Wheel Hub, Used - For Ford tractor models Dexta, Super Dexta, 501, 600, 700, 800, 900, 2000 (4CYL 62-64), 2100, 2110, 2120, 2150, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3610, 3900, 3910, 4000 (4CYL 62-64), 4100, 4110, 4120, 4190, 4600, 4600SU, Compatible with Ford Construction and industrial models 230A, 233, 234, 334, 335, 3550, 4140, Replaces Ford OEM number C9NN1104F, Replaces Ford Casting nos C9NN1106G, 6 Bolt, Studs not included, For a new version of this item use Item #: 100659, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430163) $26.01

Rear Rim Bolt Kit - This Rear Rim Bolt Kit is a set of six bolts, nuts and washers. They are 5/8 inches-18 x 2.82 inches long. Replaces: 33806S34, 33806S36, 33806S7, 350719S8, 370938S36, 370938S43, 408, 81821369. (Item #: 184824, Ref: 350719KIT) $23.00

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Cooling System

Thermostat Housing to Block Gasket - Tractors: all 4-cylinder, 1953-1964, gas and diesel. Bolt holes measure 3/8 inch in diameter, and center to center of bolt hole spacing is 2 3/4 inches. Sold and Priced as Each. (Item #: 191970, Ref: EAF8255A) $5.20

Decals and Emblems

Decal, Fear This Ford - 12-1/2 inches x 3 inches. For all Ford tractors. (Item #: 183476, Ref: S.67825) $15.80

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Item #: 178113, Ref: SHERMAN) $20.20

Drive Train

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Item #: 178105, Ref: NDA7223A) $6.40

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Solenoid, 12 Volt - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Item #: 150223, Ref: DR1467) $19.20

Switch, Push Button - This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Item #: 121141, Ref: R7994) $13.40

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Pistons and Sleeves

No
Picture
Seal Kit - Seal kit, for cylinder E2NN3A540BA. Piston rod is retained with 1" snap ring and 1-3/4" threaded spanner nut. (Item #: E2NN3X-SK) $64.99

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Ford 4600SU Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Ford 4600SU Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Ford 4600SU Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Ford 4600SU Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Ford 4600SU Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Ford 4600SU Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08

Rain Cap - This rain cap is for a 4.00 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.00 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Filter Screen and Gasket for Sediment Bowl - 1-1/2 inch outside diameter seal (for a 1 9/16 inside diameter housing and a 1 3/8 inch outside diameter screen. Measure before ordering. For tractor models (1958-1964 All with 134 cubic inch engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172 cubic inch engines up to 126524), 801, 901, 1801. (Item #: 150700, Ref: ABC346) $5.70

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

Gauges

Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type ammeter. 30-0-30. Black ring. Replaces FAD10850A. (Item #: 110410, Ref: A0NN10670A-BLAC) $10.70

No
Picture
Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Drawbar Check Chain Kit - This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. Fits: Jubilee, NAA, NAB, 2000 3 Cylinder, 2000 4 cylinder, 2600V, 2N, 3600V, 4000 4 Cylinder, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 2030, 2031, 2100, 2110, 2111, 2120, 2121, 2130, 2131, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3110, 3120, 3300, 3330, 3600, 3610, [4030, 4130, 4140 (4 cylinder)], 4031, 4040, 4100, 4110, 4120, 4121, 4131, 9N, Industrial: 231, 233, 333, 334, 335, 1801, 1811, 1821, 1841, 1871, 1881, 230A, 3400, 3500, 530A, Dexta, Super Dexta. Replaces: 957E597, 957E596, CBPN598A, NCA597B, NCA596B. (Item #: 115051, Ref: NCA596B) $40.60

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2 inch L hole center to hole center, 2 1/2 inch wide, 1 1/8 inch thick (drawbar fits lift between lift arms). (Item #: 103174, Ref: 9N5182) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.17

Link End - Plated, forged, 1-1/4 inch thread, left hand, 1 inch hole. (Item #: 180473, Ref: RE1717L) $19.00

Link End - Plated, forged, 1-1/4 inch thread, right hand, 1 inch hole. (Item #: 174507, Ref: RE1718R) $21.27

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8 inch hole diameter. 31 1/2 inches center to center. (Item #: 110516, Ref: 230042XHD) $15.20

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 17.5 to 24 inches overall. 3/4 inch pin holes and both eyelets are 1 3/4 inch wide. Dichromate plated. (Item #: 103162, Ref: JSA1012C) $20.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $64.00

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $24.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $32.10

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $65.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $780.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $75.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $30.30

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $49.00

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $270.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly uses 1 1/2 inch diameter shaft. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Assembly, 12 Volt - (Single) Headlight Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Item #: 184496, Ref: L525HB-12V) $53.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

No
Picture
Sealed Beam Bulb, 12 Volt - Red/white combination work/tail light, 4-1/2 inch diameter. (Item #: 116014, Ref: S.52670) $23.50

Tail Light Lens - Plastic 4 inch lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3 1/8 inches apart). Fits tractors 1953 and newer. (Item #: 178144, Ref: FDV13450A) $16.50

Miscellaneous

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Blue - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without Additional Handling & Oversize Fees Apply To This Item, tools, (Item #: 161190) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Brownish Medium Gray, 1 Quart - Ford Brownish Medium Gray was used for the same applications as TP240Ford Medium Gray. This is a lighter shade. Since the tractors did not come off the production line all the same, the darker or light shades are completely up to the desires of the customer. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184575, Ref: TP245QT) $50.00

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Empire Blue, 1 Gallon - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100713, Ref: TP360GAL) $57.00

No
Picture
Paint, Empire Blue, 1 Quart - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100712, Ref: TP360QT) $24.00

No
Picture
Paint, Empire Blue, Spray Can - This Ford Empire Blue is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1962 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100711, Ref: TP360SP) $7.70

No
Picture
Paint, Ford White, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108135, Ref: TP470GAL) $86.00

No
Picture
Paint, Ford White, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108133, Ref: TP470SP) $10.60

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, Spray - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100723, Ref: TP760SP) $8.50

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100716, Ref: TP330GAL) $57.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100715, Ref: TP330QT) $21.40

No
Picture
Paint, Light Gray, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For tractor models 1965 and up. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100714, Ref: TP330SP) $9.10

No
Picture
Paint, Medium Gray, 1 Quart - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100718, Ref: TP240QT) $22.00

No
Picture
Paint, Medium Gray, Spray Can - This Ford Medium Grey was used from 1948 through 1965 on models 8N, NAA, Jubilee, 600, 700, 800, 900, 501, 601, 701, 801, 901 and Super Major. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100717, Ref: TP240SP) $8.50

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Vibrant Blue, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156586, Ref: TP365GAL) $90.00

No
Picture
Paint, Vibrant Blue, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156587, Ref: TP365QT) $35.00

No
Picture
Paint, Vibrant Blue, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 156585, Ref: TP365SP) $10.00

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

PTO / Driveline

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Overide Clutch - This 6 spline Override Coupler converts a 1 1/8 inch diameter PTO shaft to 1 3/8. It has a 1 1/8 inch female at one end and 1 3/8 inch male at the other end). Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103169, Ref: C670F) $46.60

PTO Overide Clutch - Override coupler for 1 3/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 191020, Ref: C680F) $76.00

PTO Overide Clutch - Override coupler for 1 1/8 inch female to 1 1/8 inch male, 6-spline. Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided for any device intended for installation between the tractor PTO shaft and the implement input driveline. (Item #: 103167, Ref: C690F) $76.00

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up and angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056) $2161.57

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 models with a 17 inch wide steel seat pan. (Item #: 115058, Ref: 8N401BLK) $37.90

Tie-On Seat Cover - Blue and White, 19 inches wide. Deluxe with 2 inches of foam. (Item #: 101353, Ref: R1013) $31.30

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Item #: 186563, Ref: RPD112K) $173.00

Steering

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Item #: 185079, Ref: WSV125A) $128.00

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. (Item #: 183819, Ref: WHS064) $82.00

Wheel Clamp - Wheel clamp holding disc to rim for double ramp type on power adjustable rims. For 28 inch rim on tractors 2000, 3000, 4140, (10-1968 to 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 to -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241, E5NN1043AA. (Item #: 124526, Ref: 898021M1) $18.20

Wheel Front 8X16 - Front Wheel 8 inch x 16 inch ; 6 bolt, 6 inch circle, 4.62 inch pilot. (Item #: 180445, Ref: D5NN1007A) $112.00