Re: Allis Chalmers WD 45 Hyd Oil / Rear End

Posted by acorange on March 28, 2005 at 07:10:16 from (216.248.102.129):

In Reply to: Allis Chalmers WD 45 Hyd Oil / Rear End posted by Pete Churilla on March 25, 2005 at 15:46:11:

Use 85/140 in the trans.
80/90 will work but the trans. and hand clutch
work better in my WD with 85/140. It may not matter with the spiral cut gears in the WD45.
Just 10/30 oil in the hyd. res. works great or if
you have any universal hyd. oil you can use that. The seal between
the hyd. res. and trans. res. can leak between each other. If you are "loseing" hyd. oil and the trans. oil is "growing" this seal is out and the tractor has to be split to change it.
This was not as much of a problem on the WD45's as it was on the early WD's.
Just keep an eye on the fluid levels for awhile after you change the fluids.
My 2 cents...

Follow Ups:

Post a Followup Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]