Posted by steve(ill) on November 10, 2013 at 18:04:37 from (74.36.177.152):
In Reply to: Re: Allis C question posted by Ted in NE-OH on November 10, 2013 at 17:47:27:
there should also be two lugs welded to your rim, and one of the locks fits snug between them.. that keeps the rim from slipping and letting the cams get loose... When you tighten the two ecentrics, can you turn them all the way around so they are loose again ?? IF so, you need to add a shim under the ecentic in the VEE as TEd said. Once you get everything on the rim tight, then you need to retighten the 4 bolts/ nuts with a BIG wrench or impact.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.