Re: 7020

Posted by j bostrom mn on April 22, 2013 at 06:07:51 from (50.33.46.35):

In Reply to: 7020 posted by Elton Fancher on April 17, 2013 at 06:29:27:

i cant remember if it takes 2 or 3 of these special bolts but what ever number it is i think you have to have them all to push the wedge out straight ok i went out to the shed it takes 3 if you use less you may bust the wedge ??? i think at 1 time we broke 1 here should be a pic of the set if i can get it to upload total legnth is 7" the turned down part is 3" -the turned end is machined to a point- the 3/4"threads are 3 1/2"long -and the bolt is very hard 6 hash marks on the head- the turned down part is turned down to 1/2" good luck

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]