Posted by red.green on March 20, 2013 at 20:38:08 from (76.209.53.7):
In Reply to: WDmagneto posted by eaglesnest on March 17, 2013 at 19:26:17:
You state you have two wires coming out of the mag. Normally an FM J does not have any wires coming out of it other than the kill wire and the four plug wires. Under normal circumstances there is a wire connecting from the points to the kill wire terminal. This is nothing more than an insulated brass machine screw that goes through the case wall. On the outside of the case there is a wire connecting to a kill switch. Grounding this terminal is what kills the tractor.
If you have an additional wire coming out of the mag then somebody has rigged up an external coil or possibly an external condenser.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Identifying Tractor Noises - by Curtis Von Fange. Listening To Your Tractor : Part 3 - In this series we are continuing to learn the fine art of listening to our tractor in hopes of keeping it running longer. One particularly important facet is to hear and identify the particular noises that our
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.