FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 4270 Tractor Parts

[Categories] [All Massey Ferguson Models] [Print]

Belts

Fan Belt, Set of 2 - For Massey Ferguson tractor models 4260, 4263, 4270, 4360, 4370, 5300, 5320, 5445, 5455, 6235, 6245, 6255, 6260, 6265, 6270, 6280 (s/n H272022-earlier), 6290, 6445, 6455, 6465, 6475, 6480, 7465, 7475, Replaces Massey Ferguson OEM number 3780606M91, 3779379M91, 3808730M1, 0.531" x 56.27" Automotive Polyester Cord, (Item #: 182126) $18.20

Brakes

Brake Actuator, Left Side - This is a Left Side Brake Actuator used on Massey Ferguson 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 382, 390, 390T, 396, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4315, 4320, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5340, 5355, 5360, 5365 Replaces 3596776M91 (Item #: 160569, Ref: 3596776M91) $14.90

Brake Actuator, Right Side - This is a Right Side Brake Actuator used on Massey Ferguson 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 382, 390, 390T, 396, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4315, 4320, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5340, 5355, 5360, 5365 Replaces 3596778M91 (Item #: 160570, Ref: 3596778M91) $99.78

Intermediate Brake Disc - This Intermediate Brake Disc has a 8.976 inch outside diameter and a 4.960 inch inside diameter. Replaces OEM numbers K963647, K945755, 37H8180, 1860965M1, 1860965M2, 3613538M2, 15454600, 154.5460.0, 395.34.0112m 411040, 30359700 (Item #: 126977, Ref: 1860965M2) $16.00

Clutch

Carrier - Carrier for clutch release bearing. Carrier bore 2.228 inch (2-1/4 inch approximately), outside diameter 2-1/2 inch. PLEASE CHECK CARRIER BORE BEFORE ORDERING. This part is used on many Massey Ferguson Agriculture and Industrial Models. Replaces 519232M1, 886727M1, 886727M2, 886727M3, 886727T4 (Item #: 112309, Ref: 886727M4) $14.50

Clutch Kit 13 Inch - Our new 13 inch clutch kit contains: a 13 inch, 25 spline, split torque pressure plate (3701015V92); 13 inch, 21 spline, 5 pad, spring paddle disc (3701011M91); pilot bearing (C5NN7600A) and release bearing (83914247), and clutch alignment tool. For tractor models 375, 390, 390T, 393, 394S, 396, 398, 399, 4243, 4245, 4253, 2455, 4260, 4263, 4265, 4270, 4345, 4355, 4360, 4370. Replaces 3701015V92, 3701015M91, 133000810, 133000811, 3613975M91. (Item #: 112315, Ref: 1212-1415) $450.00

Cooling System

Radiator - This radiator has 8 fins per inch and 4 rows of tubes. It is 21.8125 inches tall and the core size is 21.5 inches wide. This radiator fits Massey Ferguson Tractor models 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370. Replaces 3808159M2, 3808159M3, 3808158M3, 3810188M92. (Item #: 119579, Ref: 3808159M2) $546.00

Radiator Hose - Lower - For Massey Ferguson tractor models 4225, 4235, 4245, 4260, 4270, 4325, 4335, 4355, 4360, 4370, 6235, 6245, 6260, 6270, 6280, 6290, Replaces Massey Ferguson OEM number 3801168M1, 2.156" I.D., 2.0" I.D., Fits Engines: 1004.4, 1004.4T, 1006.6, 1006.6T, For Hose Clamp use Item #: 130469, (Item #: 159458) $24.10

Drive Train

Ball Bearing - This is a main shaft rear and countershaft bearing used in many Massey Ferguson models. It measures: 50mm inside diameter, 90mm outside diameter, and 20mm wide. Confirm measurements or OEM part number before ordering. Replaces 195493M1, 391128X1, JD10011, 6210ZZ, 6210, 851-6210ZZ (Item #: 173672, Ref: 195493M1) $24.20

Bearing, Mainshaft - For tractor models 1085, 135, 150, 165, 175, 20, 20C, 20D, 20E, 20F, 231, 235, 240, 240P, 245, 250, 253, 255, 261, 263, 265, 270, 271, 275, 281, 282, 283, 285, 290, 298, 30, 31, 360, 362, (365 serial number up to B18009), 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50C, 50D, 50E, 50F, 50H, 50HX, 60H, 670, 690, 698, 699. (Item #: 173116, Ref: 338552X1) $44.80

Bearing, Needle - Needle Bearing for countershaft. For 1080, 1085, 1200, 1250, 133, 135, 140, 145, 148, 150, 152, 158, 165, 168, 175, 178, 180, 185, 188, 20, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 260, 261, 263, 265, 265 S (TR), 270, 275, 282, 283, 283 Brazilian, 285 (FR), 285 S (TR), 285 US Built, 290, 298, 30, 30B, 30D, 30E, 30H, 31, 3165, 340, 342, 35, 350, 352, 355, 35X, 360, 362, 365, 375, 375E Brazilian, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 40H, 415 Brazilian, 4215, 4220, 4225, 4235, 4245, 425 Brazilian, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 475 Brazilian, 481 Brazilian, 50, 50B, 50C, 50D, 50E, 50EX, 50H, 50HX, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 550, 560, 565, 575, 590, 592, 595, 60H, 60HX, 65, 65 US Built, 670, 675, 690, 698, 698T, 699, 765, 835, 865, Super 90, TO35, Massey Harris 50. Replaces 532883M1, 195453M1 (Item #: 167261, Ref: 195453M1) $9.60

Drive Shaft Retainer Assembly O-Ring - This Drive Shaft Retainer Assembly O-Ring is used on multiple models of Massey Ferguson. Replaces OEM numbers 886089, 886089M1 (Item #: 152375, Ref: 886089M1) $1.20

Main Input Shaft Inner Bearing - This bearing is widely used in 12 Speed Synchromesh, Multi Power, 8 Speed Constant Mesh, and 8 speed Synchromesh transmissions. It measures 1 inch inside diameter, 1 5/16 inchs outside diameter, and is 1 inch long. Replaces Massey Ferguson part numbers 2700273V1, 2700273M1 (Item #: 187378, Ref: 2700273M1) $10.80

Pinion Bearing - Measuring 30mm inside diameter, 62mm outside diameter, and 24mm wide, this bearing replaces Massey Ferguson part numbers 834733M1, 834733V1. Used on Massey Ferguson models: 1004, 1004T, 1080, 1085, 1200, 1250, 275, 283, 283 Brazilian, 285 (FR), 285 US Built, 290, 290 US Built, 298, 30H, 375, 375E Brazilian, 390, 390E Brazilian, 390T, 398, 399, 415 Brazilian, 4245, 425 Brazilian, 4255, 4260, 4270, 4345, 435 Brazilian, 4355, 4360, 4365, 4370, 440 Brazilian, 445 Brazilian, 465 Brazilian, 475 Brazilian, 5340 Brazilian, 5355 Brazilian, 5360 Brazilian, 5365 Brazilian, 575, 590, 592, 595, 650 Brazilian, 660 Brazilian, 675, 690, 698, 698T, 699. (Item #: 180084, Ref: 834733M1) $70.00

Pinion Jam Nut, New Style - Used on Massey Ferguson models: 1004, 1004T, 1200, 1250, 165, 168, 185, 188, 20, 20C, 20D, 20E, 20F, 230, 230 US Built, 240, 245, 250, 253, 255, 260, 261, 265, 27, 275, 282, 282 US Built, 283, 285 (FR), 290, 290 US Built, 298, 30, 30B, 30D, 30E, 30H, 31, 340, 342, 350, 352, 355, 360, 362, 372, 375, 375E Brazilian, 382, 383, 390, 390E Brazilian, 390T, 393, 396, 398, 399, 40, 40B, 40E, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 50, 50A, 50B, 50C, 50D, 50E, 50EX, 50F, 50H, 50HX, 550, 60H, 60HX, 670, 675, 690, 698, 698T, 699. This new style nut replaces 532956M1, 3596252M1 (Item #: 173348, Ref: 532956M1) $10.90

Planetary Pinion Gear Shaft - The end of this shaft is threaded with a through hole for a Roll Pin. It measures 1.03 inches in diameter and is 3.26 inches long. Replaces Massey Ferguson part number 1864869M1. Used on Massey Ferguson models: 2500, 4500, 6500, 20E, 20F, 2200, 24, 25, 30, 30B, 30D, 30E, 30H, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E. 50F, 50H, 60, 60H, 6500H, 6800H, 135, 150, 165, 165UK, 175, 175UK, 178, 180, 235, 240, 245, 250, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 275UK, 281, 282, 283, 290, 360, 362, 365, 375, 383, 390, 390T, 393, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 670, 690 (Item #: 170392, Ref: 1864869M1) $22.70

No
Picture
PTO Lift Pivot Shaft - For Massey Ferguson tractor models F40, TO35, 35, 35 (France), 35X (France), 50, 50 (Harris and Massey), 65, 135, 135 (UK), 150, 165, 165 (UK), 175, 175 (UK), 178 (UK), 180, 230, 231, 231S, 235, 240, 240 (S, Turkey), 245, 250, 255, 265, 265S (Turkey), 270, 271X, 271XE, 275, 275 (UK), 281, 281X, 281XE, 282, 283, 283 (UK), 283 (Brazil), 285, 285S (Turkey), 290, 290 (UK), 298, 360, 375, 383, 390, 390T, 393, 396, 398, 399, 431, 451, 461, 471, 481, 492, 543, 583, 596, 670, 690, 698, 699, 1080, 1085, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 898304M91, (Item #: 176229) $7.30

Shift Lever Locking Pin - This Shift Lever Locking Pin is used on Ferguson, Massey Harris and Massey Ferguson applications. It replaces OEM part numbers 180581M2, 1678440M1, 180581M1 (Item #: 183009, Ref: 1678440M1) $1.10

Electrical System

Alternator - 12 volt, 65 amp. For tractor models (240 1983-99 with 152 dsl), (360 1986-92 with 152 dsl), (362 1990-92 with 236 dsl), (365 1990-96), (368 1986-92 with 236 dsl), (375 1986-98 with 236 dsl), (383 1986-98 with 248 dsl), (390 1987-98 with 248 dsl), (390T 1989-98 with 236 dsl), (393 1995-98 with 236 dsl), (396 1992-98), (398 1987-97), (399 1987-92 with 354 dsl), (4225, 4233, 4235, 4243, 4245, 4253, 4255, 4260, 4263, 4270 1997-00 with 1004.4 dsl). Replaces 24199, 24294. (Item #: 112389, Ref: ALU0010) $119.00

Starter - 12 volt, 10 tooth, clockwise rotation. For tractor models (4225, 4233, 4235, 4243, 4245, 4253, 4255 1997-00 with 1004.4 dsl), (4260, 4263, 4270 1997-00 with 1006.6 dsl), (4790 1978-80 with V8-640 dsl), (6140 1995-98 with 1004.4 dsl), (6150 1995-98 with 244 dsl). Replaces 26410, 26274, 26366, 27539. Verify numbers on starter before ordering. (Item #: 112303, Ref: SLU0005) $165.00

Starter - This starter comes with solenoid, is for 12 volts, clockwise rotation, 10 teeth, 3 KW and LEFT HAND MOUNT. For models 1014, 1020, 1114, 155, 158, 165, 168, 175, 178, 185, 188, 240, 265, 275, 290, 298, 3050, 3060, 3065, 3070, 3075, 362, 365, 372, 375, 382, 390, 396, 398, 399, 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 431, 4325, 4335, 4345, 4355, 4360, 4365, 481, 492, 506 and other combine models. Replaces 3821818M93, 3821818M94, 4225326M91 and Perkins numbers 3873K405 and 2873K625. (Item #: 118485, Ref: 3821818M91) $191.37

Starter, LH Mount - Left Hand Mount. Order 3763363M91 if you have a Right Hand Mount. Has 3.5 Inch center-to-center bolt pattern. Replaces; 3597371M2, 1868283M3, 1868283M5, 1691805M1, 1691805M2, 3027466M1, 3609526M91, 1680065M1, 1680068M1, 3763363M92. Replaces Lucas: 26274, 26274A, 26274A/D, 26274D, 26274E, 26274E/F, 26274H, 26274H/N, 26295, 26295A, 26295A/B, 26295B, 26295D, 26295D/E, 26295E, 26295F/M, 26320, 26320A/B, 26320D, 26323, 26323A, 26345, 26345A/B, 26345D/J, 26366, 26366A/F, 26410, 26410A, 26410A/B, 26410B, 26414, 26414A/E, 26414E, 26925193A, 26925193D, 27515, 27515A, 27515A/E, 27515E, 27523, 27529, 27539A, 27539B, 27539C, 27539D, 27539E, 27572, 27572B, 27572D, 27578, 27578A, 27578B, 27578D, 27583, 27583A, 27583B, 27583D, 27583H, 27583J, 27599A, NSB531, NSB540, 26404, 26404A, 27536 (Item #: 112303) $165.00

No
Picture
Starter - Lucas Style DD (18919) - For Massey Ferguson tractor models 471, 481, 4225, 4233, 4235, 4240, 4243, 4245, 4255, 4260, 4263, 4270, Replaces Massey Ferguson OEM number 3763362M94, 888346M1, 888346M2, Replaces Lucas manufacturer number 26151, 26198, 26281, 27415, 27473, 27479, 27487, Replaces Perkins OEM number 1873A013, 1873A015, 2872D002, 2873119, 2873123, 2873124, 2873145T, 2873180, 2873181, 2873185, 2873186, 2873A015, 2873A103, 2873D001, 7323002, 7523821, Replaces Prestolite manufacturer number 66925051, 859883, PBNS0170, Replaces manufacturer number 11.131.635, AZJ3203, AZJ3447, 54293277, 63227479, 63227487, MSN178, Lucas style direct drive, Voltage: 12, Rotation: clockwise, Teeth: 10, (Item #: 189493) $178.00

Engine Bearings

Connecting Rod Bearing - .010 - For Massey Ferguson tractor models 2705, 3120 (T), 3140, 3525, 3545, 3630, 3650, 3660, 4270, 6180, 8120, Compatible with Perkins Engine (s) 6.354.4 (Turbo, TU Build Code), 1006-6 (Turbo), Compatible with White tractor models 2-85, 2-88 (s/n TG22453), 2-105 (Late), 2-110 (s/n TW700018), Sold in complete sets, Bearing Size: .010" Oversize, (Item #: 107140) $40.50

Connecting Rod Bearing - .020 - For Massey Ferguson tractor models 2705, 3120 (T), 3140, 3525, 3545, 3630, 3650, 3660, 4270, 6180, 8120, Compatible with Perkins Engine (s) 6.354.4 (Turbo, TU Build Code), 1006-6 (Turbo), Compatible with White tractor models 2-85, 2-88 (s/n TG22453), 2-105 (Late), 2-110 (s/n TW700018), Sold in complete sets, Bearing Size: .020" Oversize, (Item #: 107141) $40.50

Connecting Rod Bearing - .030 - For Massey Ferguson tractor models 2705, 3120 (T), 3140, 3525, 3545, 3630, 3650, 3660, 4270, 6180, 8120, Compatible with Perkins Engine (s) 6.354.4 (Turbo, TU Build Code), 1006-6 (Turbo), Compatible with White tractor models 2-85, 2-88 (s/n TG22453), 2-105 (Late), 2-110 (s/n TW700018), Sold in complete sets, Bearing Size: .030" Oversize, (Item #: 107142) $40.50

Connecting Rod Bearing - Standard - Set - Notched Rods - For Massey Ferguson tractor models 2705, 3120 (T), 3140, 3525, 3545, 3630, 3650, 3660, 4270, 6180, 8120 Replaces Massey Ferguson OEM number 742513M91, , Compatible with Perkins Engine (s) 6.354.4 (Turbo, TU Build Code), 1006-6 (Turbo), Compatible with White tractor models 2-85, 2-88 (s/n TG22453), 2-105 (Late), 2-110 (s/n TW700018), Replaces White OEM number 159988A, Standard bearing size, Sold in complete sets, (Item #: 105303) $40.50

Main Bearings - .010" Oversize - Set - For Massey Ferguson tractor models 3120, 3140, 3660, 4263, 4270, 6170, 6180, 8120, Replaces Massey Ferguson OEM number 3637021M91, Sold in complete set (thrust washers not included), Bearing Size: .010" Oversize, For Standard main bearing use Item #: 107215, (Item #: 107213) $52.00

Main Bearings - .020" Oversize - Set - For Massey Ferguson tractor models 3120, 3140, 3660, 4263, 4270, 6170, 6180, 8120, Sold in complete set (thrust washers not included), Bearing Size: .020" Oversize, For Standard main bearing use Item #: 107215, (Item #: 107214) $70.00

Main Bearings - .030" Oversize -Set - For Massey Ferguson tractor models 3120, 3140, 3660, 4263, 4270, 6170, 6180, 8120, Sold in complete set (thrust washers not included), Bearing Size: .030" Oversize, For Standard main bearing use Item #: 107214, (Item #: 107215) $54.00

Main Bearings - Standard - Set - For Massey Ferguson tractor models 3120, 3140, 3660, 4263, 4270, 6170, 6180, 8120, Sold in complete set (thrust washers not included), Bearing Size: Standard, For .010" main bearing use Item #: 107215, (Item #: 107212) $28.60

PTO Friction Disc - For Massey Ferguson tractor models 240 (s/n A20286-later), 253, 263, 265S, 362 (s/n B33001-later), 375 (s/n B33001-later), 383 (s/n B33001-later), 390 (s/n B33001-later), 396 (s/n B33001-later), 398 (s/n B18009-later), 399 (with 1006.6 Engine), 690, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Replaces Massey Ferguson OEM number 1688532M1, 1688532V1, (Item #: 155524) $21.60

Thrust Washer Set - 4 Pieces - FOR AD3.152 Perkins Diesel. With engine serial number less than 2820092. (Item #: 107167, Ref: 31137211_21) $6.90

Thrust Washers - Set of 4 Halves - FOR AD3.152 Perkins Diesel. Engine serial number 8504190> with offset tab and 6.354 Perkins Diesel Engine. Set of 4 halves, makes 2 complete thrust washers. (Item #: 31137551) $12.44

Engine Gaskets

Conversion Gasket Set - For Massey Ferguson tractor models 3120, 3140, 3660, 4263, 4270, 6170, 6180, 8120 Replaces Massey Ferguson OEM number U5LB0153, , Compatible with Perkins Engine (s) 1006-6, 1006-6T, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set (rear rope seal not included), (Item #: 107312) $47.40

Head Gasket Set - For Massey Ferguson tractor models 3120, 3140, 3660, 4263, 4270, 6170, 6180, 8120, Replaces Massey Ferguson OEM number 3638577M91, 4222920M1, 4222920M91, 59626, 733589M91, 735349M1, 735349M91, 746051M1, 82907, U5LT0179, U5LT0081, U5LT0084, VPA4004, Engines: Perkins 1006.6, T1006.6 Diesel, (Item #: 107270) $53.00

Oil Pan Gasket - For Massey Ferguson tractor models 3120, 3140, 3660, 4263, 4270, 6170, 6180, 8120, Compatible with Perkins Engine (s) 1006-60T, Oil Pan Gasket Only, (Item #: 107293) $12.50

Seal, Rear Main - FOR AD3.152 and 6.354 Perkins Diesel Engines. 5.394 inch X 6.260 inch X .433 inch.303158411 (Item #: 107230, Ref: 1447049M91) $19.10

No
Picture
Valve Cover Gasket - For Massey Ferguson tractor models 271, 271X, 271XE, 281, 281X, 281XE, 471, 481, 3315, 3330, 3340, 3350, 3355, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 6235, 6245, 6255, 6265, Compatible with Massey Ferguson Hay Cutting (s) 220, Replaces Massey Ferguson OEM number 4223552M91, 4224452M91, (Item #: 166802) $38.20

Engine Parts

Bushing, Connecting Rod - FOR AD3.152 Perkins Diesel. Replaces 740407M1, 740407V1, 731087M1, 0050119, 31134151, 00505353, 81803978, 31134151 80505353, 296149A1, 957E6207 (Item #: 128688, Ref: 957E6207A) $2.70

Connecting Rod Bushing - For Massey Ferguson tractor models Super 90, 175, 180, 255, 265, 274-4, 275, 283, 290, 294-4, 362, 374S, 375, 383, 384S, 390, 394S, 670, 690, 1085, 3050, 3060, 3090, 3095, 3120, 4225, 4235, 4240, 4260, 4270, 4325, 4335, 5275, 5285, 5290, Compatible with Massey Ferguson Combine (s) 31, 300, 410, 510, Compatible with Massey Ferguson Construction and industrial models 50, 50B, 50C, 50E, 50F, 50H, 50HX, 60H, 320, 350, 6500, 6500H, Replaces Massey Ferguson OEM number 731463M1, 0050128, 31134123, 50128, 732985M91, 733767M1, (Item #: 168966) $4.30

No
Picture
Cylinder Head, Remanufactured, 3637055M91 - For Massey Ferguson tractor models 396, 399, 3095, 3120, 3125, 3140, 3645, 3655, 3660, 4260, 4270, 6170 Replaces Massey Ferguson OEM number 3637055M91, 3637054M91, 3638419M91, 3641853M91, 4222705M91, , Compatible with Perkins Engine (s) 1006-6, Replaces Casting number 3712L02A/1, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 210017) $1375.01

Cylinder Head, Used - For Massey Ferguson tractor models 396, 399, 3095, 3120, 3125, 3140, 3645, 3655, 3660, 4260, 4270, 6170 Replaces Massey Ferguson OEM number 3637055M91, 3637054M91, 3638419M91, 3641853M91, 4222705M91, , Compatible with Perkins Engine(s) 1006-6, Replaces Casting nos 3712L02A/1, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 210017, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429945) $1025.01

Flywheel Ring Gear - For Massey Ferguson tractor models 396, 399, 699, 4260, 4270, 4360 Replaces Massey Ferguson OEM number 3819720M1, 747694M1, , Compatible with Perkins Engine (s) A6.354, 1006-6, Replaces Perkins OEM number 31161148, Teeth: 118, I.D.: 350mm (13.78"), (Item #: 169877) $17.00

Flywheel with Ring Gear - For Massey Ferguson tractor models 4260, 4263, 4270, 4360, 4370, Replaces Massey Ferguson OEM number 3819669M91, 3638443M91, (Item #: 169686) $140.00

Intake Valve - For Massey Ferguson tractor models 396, 399, 650, 3095, 3120, 4225, 4235, 4240, 4260, 4270, 6170, Replaces OEM number 3142L051, (Item #: 166861) $15.90

Planetary Shifter Coupler - For Massey Ferguson tractor models 30, 40, 50A, 60, 148, 158, 165, 168, 185, 188, 235, 245, 250, 255, 261, 265S, 270, 283, 285, 290, 342, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 550, 565, 590, 595, 650, 670, 675, 690, 698, 699, 1080, 1085, 1200, 1250, 4215, 4220, 4235, 4245, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 30, 30B, 30D, 30E, 40, 40B, 50A, 50C, 50D, 50E, 50H, 60, 60H, 2500, 4500, 6500, Replaces Massey Ferguson OEM number 1866557M2, 1866557M1, Teeth: 28 and 22, (Item #: 151825) $18.70

No
Picture
Valve Exhaust - For Massey Ferguson tractor models 396, 399, 699, 2640, 2675, 2705, 3075, 3090, 3095, 3120, 3125, 3140, 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4265, 4270, 4800, 4900, 6140, 6150, 6170, 6180, 6190, 8120, Compatible with Massey Ferguson Combine (s) 750, 760, 850, 855, 860, 865, 8450 Replaces Massey Ferguson OEM number 748309M1, , Compatible with White tractor models 2-85, 2-88, 2-105, 2-110, Compatible with White Combine (s) 8700, 8800, 8900, Replaces White OEM number 3142A051, (Item #: 166938) $9.00

Valve Guide, Exhaust - These Exhaust Valve Guides are used in Perkins A4.236 Diesel Engine (early block), A4.236 Diesel Engine (late block), A4.248 (liner less Flame Ring), A4.248 (liner with Flame Ring). Replaces original part numbers 31431751, 33261751, 33261752, 33261754, 33261757, 3343J001, 3343J002, 3343J021, 3638922M1, 4223074M1, 748420M1. (Item #: 166888, Ref: 748420M1) $2.70

Valve Spring - Inner - For Massey Ferguson tractor models 362, 365, 375, 383, 390, 396, 399, 699, 2640, 2675, 2705, 3075, 3090, 3095, 3120, 3125, 3140, 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4265, 4270, 4800, 4900, 6140, 6150, 6170, 6180, 6190, 8120, Compatible with Massey Ferguson Combine (s) 550, 750, 760, 850, 855, 860, 865, 8450 Replaces Massey Ferguson OEM number 740465M1, , Compatible with White Combine (s) 8600, 8700, Replaces White OEM number 31744133, (Item #: 166939) $1.70

Valve Tappet - This Valve Tappet (Lifter) is used on Perkins: 1103A-33, 1103A-33T, 1103B-33, 1103B-33T, 1103C-33, 1103C-33T, 1103C-33TA, 1103D-33, 1103D-33TA, 1104A-44, 1104A-44T, 1104A-44TA, 1104C-44, 1104C-44T, 1104C-44TA, 1104C-E44, 1104C-E44T, 1104C-E44TA, 1106C-E60TA, A4.212, A4.236, A4.248, A6.354, AT4.236, AT6.354, T4.236, T6.354. Replaces 291962A1, 1481642, 4222069V1, 31434163, 4222069M1, 4226515M1, 740671M1, 3142U031, 31434163, 30-3181677, 70257402, 257402 (Item #: 165600, Ref: 740671M1) $6.90

Valve Train Kit - 45 degree Valve Seat Angle - For Massey Ferguson tractor models 396, 399, 3095, 3120, 4260, 4270, 6170, Compatible with Perkins Engine (s) 1006-6 (diesel, high speed), Heads with dual springs, Kit includes: Intake and exhaust valves, guides, springs and keepers, (Item #: 120335) $197.00

Engine Pistons and Sleeves

No
Picture
Sleeve, Perkins 152 Diesel - For AD3.152 Perkins Diesel. Price is per sleeve. Flange is (.150 inch). With engine serial number less than 2820092. Replaces 31358345, 1434175M1, 31358345, 734175M1, 739043M1, 2130002, 28057, 31358322, 72080003. (Item #: 128601, Ref: 739043M1) $22.50

Exhaust System

Exhaust Pipe - The Exhaust pipe has an Inlet Inside Diameter of 2.5 Inches (64mm). The Overall Length is 41.75 Inches (1060mm). It is used on Massey Ferguson: 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 390T, 396, 398, 399, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 4345, 4355, 4360, 4365, 4370, 5340, 5355, 5360, 5365, 5425, 5435, 5445, 5455, 6120, 6130, 6140, 6150, 6160, 6170, 6180, 6235, 6245, 6255, 6260, 6445, 6455. Replaces 1696603M91, 3383014M7 1696603M3 (Item #: 171543, Ref: 3383014M7) $47.50

Muffler - For Massey Ferguson tractor models 4260, 4270, Replaces Massey Ferguson OEM number 3808697M1, (Item #: 171512) $79.00

Fuel System / Air Intake

Fuel Filter, CAV type - Fuel filter for tractor models 290UK, 298, 30, 3090, 3095, 3120, 3125, 3140, 35, 3545, 360, 362, 364, 3645, 3655, 3660, 374, 384, 394, 396, 399, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, MH50, 6170, 6180, 6235, 6245, 6255, 6265, 6270, 6280, 6290, 65, 698, 699, 8120, 8210. Replaces 836218M91, 1851890M1, 1049939M1. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $9.30

Fuel Pump Assembly, Diesel - 4 hole mounting, For the following models with diesel engines: 175, 180, 265, 362, 396, (399 with A6-354.4 eng., 1006.6 eng.), 699, 2640, 2675, 2705, 2745, 3090, 3095, 3120, 3125, 3140, 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 4245, 4255, 4260, 4263, 4265, 4270, 4360, 4370, 4800, 4900, 6100, 6120, 6150, 6170, 6180, 6190, 6270, 6280, 6290, 8100, 8210, 8220, 550, 750, 760, 850, 855, 860, 865, 6500. Replaces 4222105M91, 3641400M91, 312765497, 1446951M91, 1446951M1. Includes Gasket. (Item #: 110981, Ref: 4222105M91) $28.30

Fuel Solenoid - Used on Massey Ferguson 253, 263, 271X, 271XE, 281X, 281XE, 451, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4360, 4370, 8250. Replaces 4224321M1, 4224321H1, 12570188, 12570188-A, 7185-900G (Item #: 160123) $18.70

Manifold Heater - Thermostart Intake Manifold Heater on Perkins Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 893501M91, 1446935M1, 2666108, 3583453M2, 3583543M2, 3583543V2, 1854125 (Item #: 118792, Ref: 3583543M2) $10.90

Hitch / Drawbar

Lift Linkage - For Massey Ferguson tractor models 4243, 4245, 4253, 4255, 4260, 4265, 4270, 4315, 4325, 4335, 4345, 4355, 4360, 4370, Replaces Massey Ferguson OEM number 3808292M91, 3808293M91, (Item #: 159343) $205.00

Top Link Pin, Hinged - Hinged Top Link Pin. Category I, hinged upper hitch pin assembly 3/4 inch diameter, 9-5/8 inch useable Length. For tractors: TO35, MF35, F40, MF50, MF65. For MF135, MF150, MF35, MF50, TO35 and others. Replaces 180901M91, 180901M1 (Item #: 173190, Ref: 180901M91) $6.70

Hydraulic System

Control Valve, Mark III Pumps - Used on Massey Ferguson 240 built after 08/1991, 253 built after 08/1991, 283UK, 360 built after 08/1991, 362 built after 08/1991, 375 built after 08/1991, 383 built after 08/1991, 390 built after 08/1991, 390T built after 08/1991, 393, 396, 398 built after 08/1991, 399 built after 08/1991, 4225, 4235, 4243, 4245, 4253, 4255, 4263, 4270, 431, 461, 471, 481, 491, 492, 543 Industrial 20F with Vertical Mounted Control Valve. (Item #: 187548, Ref: 3611085M91) $84.28

Control Valve, Mark III Pumps - Used on Massey Ferguson 240 built after 08/1991, 253 built after 08/1991, 283UK, 360 built after 08/1991, 362 built after 08/1991, 375 built after 08/1991, 383 built after 08/1991, 390 built after 08/1991, 390T built after 08/1991, 393, 396, 398 built after 08/1991, 399 built after 08/1991, 4225, 4235, 4243, 4245, 4253, 4255, 4263, 4270, 431, 461, 471, 481, 491, 492, 543, Industrial 20F with Vertical Mounted Control Valve. (Item #: 187548, Ref: 3611085M91) $84.28

Hydraulic Pump - This is a Tandem Hydraulic Pump used on 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5335, 5340, 5355, 5360, 5365 Replaces 3701006M91, 3800194M91, 510665120, 3816909M91 (Item #: 117317, Ref: 3816909M91) $499.00

Hydraulic Pump - Dynamatic - For Massey Ferguson tractor models 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270 Replaces Massey Ferguson OEM number 3800198M91, , Compatible with White tractor models 6410, 6510, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 157682) $441.40

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

No
Picture
Hydraulic Pump Response Spring - For Massey Ferguson tractor models 178, 230, 231, 235, 240, 240P, 245, 250, 251XE, 253, 255, 261, 263, 265, 265S, 270, 271, 275, 281, 281X, 281XE, 282, 283, 285, 285S, 290, 298, 360, 362, 365, 375, 383, 390, 390T, 393, 394S, 396, 398, 399, 431, 451, 461, 471, 481, 491, 492, 543, 670, 690, 698, 699, 1085, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 1868454M2, (Item #: 173689) $0.90

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Pump, Tandem - This Tandem Hydraulic Pump is used on Massey Ferguson 4200, 4225, 4225HV, 4235, 4235 (USA), 4235HV, 4235HV (USA), 4240, 4245, 4245HV, 4255, 4255HV, 4260, 4265, 4270. Replaces 0510525065, 3816914M91 (Item #: 155889, Ref: 3816914M91) $349.00

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

Miscellaneous

No
Picture
Roller - For Massey Ferguson tractor models 20, 30, 31, 40, 135 (Without Pressure Control), 150 (Without Pressure Control), 165 (Without Pressure Control), 175 (Without Pressure Control), 180 (Without Pressure Control), 205, 230 (s/n 9A349239-earlier), 230 (s/n 9A349239-later), 231, 231S, 235, 240 (s/n N01001-earlier), 240 (s/n N01001-A20286), 240 (s/n A20286-later), 240P, 241, 245 (s/n 9A349239-earlier), 245 (s/n 9A349239-later), 250, 253, 255, 261, 263, 265, 265 (s/n 9A349239-later), 270, 271, 275 (s/n 9A349239-earlier), 275 (s/n 9A349239-later), 281, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 362, 365 (s/n B18009-earlier), 375 (s/n B18008-earlier), 375 (s/n B18009-earlier), 383, 390 (s/n B18008-earlier), 390 (s/n B18009-earlier), 390T (s/n B18009-earlier), 393, 396, 398 (s/n B18008-earlier), 398 (s/n B18009-earlier), 399 (With A6-354.4 Engine), 399 (With 1006.6 Engine), 451, 471, 481, 670, 690, 698, 699, 2135, 2200, 3165, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Compatible with Massey Ferguson Construction and industrial models 20C, 20D, 20E, 20F, 30B, 30D, 30E, 40E, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 898189M2, (Item #: 165561) $0.50

Oil System

No
Picture
Oil Pan Drain Plug - For Massey Ferguson tractor models 35, 135, 148, 154-4, 165, 168, 175, 178, 184-4, 185, 188, 240, 243, 250, 253 (T3.152.4 engine), 254, 255, 261, 263 (T3.152.4 engine), 274, 285, 290, 360, 362, 363, 365, 375, 383 (A4.248 engine), 390, 390T, 393, 396 (6.60 engine), 398, 399, 430, 431, 451, 461, 471, 481, 491, 492, 543, 565, 575, 583, 590, 595, 596, 650, 675, 680, 690, 698, 1080, 1100, 2620 (s/n S271212 -earlier), 2640 (s/n S271212 -earlier), 2645 (s/n S271212 -earlier), 2680 (s/n S271212 -earlier), 3050, 3060, 3065, 3070, 3075, 3080, 3090, 3095, 3115, 3120, 3120 (turbo), 3125, 3630, 3645, 3650, 3655, 3660, 4215, 4220, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4315, 4320, 4325, 4345, 4355, 4360, 4365, 4370, 5275, 5285, 5290, 5300, 5320, 5425, 5435, 5445, 5450, 5455, 5460, 5465, 5475, 6140, 6150, 6170, 6180, 6190, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 7465, 7475, 8110 (T6.60 engine), 8120, 8130 (T6.60 engine), 8210, 8220, Compatible with Massey Ferguson Combine (s) 530, 535, 565, 660, 750, Compatible with Massey Ferguson Construction and industrial models 20D, 40, 50, 50B, 2135, 2200 Replaces Massey Ferguson OEM number 376501X1, 748160M1, , Compatible with Perkins Engine (s) 1006-6T, Replaces Perkins OEM number 2487004, Replaces JCB OEM number 02100072, 02101691, Replaces manufacturer number VPC4400, Fits JCB Dump Truck (s) 712, 716, Fits JCB Wheel Loader (s) 425, Gasket not included, (Item #: 173857) $3.20

PTO / Driveline

Seal, PTO Shaft - Oil seal with and outside diameter of 3.13 inches, inner diameter of 2.22 inches, and a width of .736. For Models 230, 240, 243, 253, 263, 275, 290, 342, 350, 352, 355, 360, 362, 365, 375, 375E Brazilian, 390, 390E Brazilian, 396, 398 (SN (Item #: 3699801M1) $13.86

Sheet Metal / Body Parts

Gas Strut Spring Cylinder, Roof Hatch - For Massey Ferguson tractor models 20, 30, 240, 250, 275, 290, 342, 350, 360, 362, 365, 372, 375, 377, 382, 387, 390, 397, 398, 399, 670, 675, 690, 698, 699, 1014, 2620, 2625, 2640, 2645, 2680, 2685, 2720, 2725, 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095, 3115, 3120, 3125, 3140, 3505, 3525, 3545, 3630, 3645, 3650, 3655, 3660, 3670, 3680, 3690, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4270, 6110, 6120, 6130, 6140, 6150, 6180, 6190, 8110, 8120, 8130, 8140, 8150, 8160, Compatible with Massey Ferguson Construction and industrial models 20E, 30D, Replaces Massey Ferguson OEM number 1897726M91, 3301617M91, 3303021M91, 3303021M92, Rod Diameter: .315", Cylinder Diameter: .709", Piston Length: 2.362", Overall Length: 7.874", Piston Stroke: 2.756", (Item #: 113221) $29.90

Gas Strut Spring Cylinder, Window - For Massey Ferguson tractor models 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, Replaces Massey Ferguson OEM number 3901826M91, Piston Length: 4.36", Overall Length: 8.41", End Type: Eyelet and Screw Rod End, (Item #: 121278) $14.40

Grille Screen - For Massey Ferguson tractor models 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5290, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 8210, 8220, 8240, 8250, 8260, Replaces Massey Ferguson OEM number 3805876M91, Comes primered (color may vary). Prior to painting check fitment, (Item #: 153218) $200.00

Steering

No
Picture
Coupler, Drive Shaft - For Massey Ferguson tractor models 4215, 4220, 4225, 4235, 4240, 4245, 4255, 4260, 4265, 4270, 4315, 4320, 4355, 4360, 4365, 4370, Replaces Massey Ferguson OEM number 3800250M1, Coupler for drive shaft, 20 Spline, Length: 3.14", (Item #: 168916) $43.90

No
Picture
Front Axle Bushing - For Massey Ferguson tractor models 365, 375 (with 348mm Axle), 383 (with 348mm Axle), 390 (with 348mm Axle), 390T (with 348mm Axle), 393 (with 348mm Axle), 396, 398 (with 348mm Axle), 399 (with 348mm Axle), 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5300, 5425, 5435, 5445, 5455, 5460, 6445, 6455, 6460, 6470, Compatible with Massey Ferguson Construction and industrial models 50E, 50F, 50H, Replaces Massey Ferguson OEM number 882327M1, (Item #: 174610) $16.40

Gear - 3rd Pinion, Countershaft - For Massey Ferguson tractor models 253, 263, 265S (Turkey), 275 (UK), 285S (Turkey), 290 (UK), 360, 362, 365 (s/n B18009-earlier), 375, 390, 390T, 393, 394S (s/n D03066-earlier), 396, 398, 399 (with 1006.6 engine), 399 (with A6-354.4 engine), 670, 690, 698, 699, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 8250, Replaces Massey Ferguson OEM number 1617923M3, Tooth: 33, Spline: 17, (Item #: 165913) $116.00

No
Picture
Steering Arm Felt Seal - For Massey Ferguson tractor models 365, 375, 383, 390, 390T, 393, 396, 398, 399, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5425, 5435, 5445, 5455, 5460, 6445, 6455, 6460, 6470, Compatible with Massey Ferguson Construction and industrial models 50, 50B, 50D, 50E, 50H, 50HX, Replaces Massey Ferguson OEM number 882262M1, (Item #: 174609) $1.80

Steering Cylinder Seal Kit, 3443433M92, 3443433M93 - For Massey Ferguson tractor models 365 (s/n B18009-earlier), 375, 383, 390, 390T, 393, 396, 398, 399, 3070 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3075 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3080 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3085 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3090 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3095 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3115 (With Pacoma Cylinder 68MM Ram), 3120 (With Pacoma Cylinder 68MM Ram), 3125 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3140 (With Pacoma Cylinder 68MM Ram), 3630 (With Pacoma Cylinder 68MM Ram), 3645 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3650 (With Pacoma Cylinder 68MM Ram), 3655 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3660 (With Pacoma Cylinder 68MM Ram), 3670 (With Pacoma Cylinder 68MM Ram), 3680 (s/n A189033-earlier With Pacoma Cylinder 68MM Ram), 3690 (With Pacoma Cylinder 68MM Ram), 4225 (s/n K37008-earlier With Pacoma Cylinder 68MM), 4235 (With Pacoma Cylinder 68MM Ram), 4235 (s/n K37008-earlier With Pacoma Cylinder 68MM), 4240 (s/n K37008-earlier With Pacoma Cylinder 68MM), 4245 (s/n K37008-earlier With Pacoma Cylinder 68MM), 4253 (With Pacoma Cylinder 68MM Ram), 4255 (s/n K37008-earlier With Pacoma Cylinder 68MM), 4260 (s/n K37008-earlier With Pacoma Cylinder 68MM), 4263 (With Pacoma Cylinder 68MM Ram), 4270 (s/n K37008-earlier With Pacoma Cylinder 68MM), 6150 (With Pacoma Cylinder 68MM Ram), 6160 (With Pacoma Cylinder 68MM Ram), 6170 (With Pacoma Cylinder 68MM Ram), 6180 (With Pacoma Cylinder 68MM Ram), 6190 (With Pacoma Cylinder 68MM Ram), 6235 (With Pacoma Cylinder 68MM Ram), 6245 (With Pacoma Cylinder 68MM Ram), 6255 (With Pacoma Cylinder 68MM Ram), 6260 (With Pacoma Cylinder 68MM Ram), 6265 (With Pacoma Cylinder 68MM Ram), 6270 (With Pacoma Cylinder 68MM Ram), 6280 (With Pacoma Cylinder 68MM Ram), 6290 (With Pacoma Cylinder 68MM Ram), 8110 (With Pacoma Cylinder 68MM Ram), 8120 (With Pacoma Cylinder 68MM Ram), 8130 (With Pacoma Cylinder 68MM Ram), 8140 (With Pacoma Cylinder 68MM Ram), 8150 (With Pacoma Cylinder 68MM Ram), 8160 (With Pacoma Cylinder 68MM Ram), 8210 (With Pacoma Cylinder 68MM Ram), 8220 (With Pacoma Cylinder 68MM Ram), 8240 (With Pacoma Cylinder 68MM Ram), 8250 (With Pacoma Cylinder 68MM Ram), Replaces Massey Ferguson OEM number 3443433M93, 3443433M92, (Item #: 159835) $68.00

Tie Rod Center - Measuring 8.20 inches overall, with M22 X 1.5 Right Hand thread on one side and M24 x 1.5 Right Hand thread on the other. For the following MF models: 3050, 3060, 3065, 3095, 3120, 3125, 3140, 3610, 3630, 3635, 3645, 365, 3650, 3655, 3660, 3670, 3680, 3690, 375, 390, 390T, 396, 4225, 4235, 4245, 4255, 4260, 4265, 4270, 440 Brazilian, 5460, 5470, 5480, 6110, 6120, 6130, 6140, 6170, 6180, 6190, 6270, 6280, 6290, 6460, 6465, 6470, 6475, 6480, 6485, 6490, 6495, 6497, 6499, 7465, 7475, 7485, 7490, 7495, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8250, 8260, 8925, 8926, 8937, 8939, 8947. Replaces 1442486X1, 3426255R1, 346255M1, 3426255M1, 3428064M1, 7502445012, 4232169M1, 3903684V1, 83957792, CAR49013, 3909318M1, 3903684M1, 3903690M1. (Item #: 128527, Ref: AL80542) $72.00

Tie Rod End - Outer - For Massey Ferguson tractor models 398 (s/n B18009-later), 399 (with 1006.3 engine), 4245, 4255, 4270, 6150, Replaces Massey Ferguson OEM number 3764028M1, 3764028M2, With Tube, Dimension A: 10.375", Dimension B: M18 x RH Thread, (Item #: 105167) $90.00

Tie Rod, Steering Cylinder - Right Hand or Left Hand - For Massey Ferguson tractor models 4245 (4WD / AG85), 4255 (4WD / AG85), 4260 (4WD / AG85), 4270 (4WD / AG85), 4345 (4WD / AG85), 4355 (4WD / AG85), 5435 (4WD / AG85), 5445 (4WD / AG85), 5455 (4WD / AG85), 6235 (4WD / AG85), 6245 (4WD / AG85), 6255 (4WD / AG85), Replaces Massey Ferguson OEM number 3429938M2, Length: 6.102", Stem Diameter: .780" to .874", Thread Size: M18 X 1.5 RH, (Item #: 165518) $54.00

Wheels

No
Picture
12" X 24" 8 Loop Front Rim - For Massey Ferguson tractor models 290, 362, 365, 375, 390, 390T, 393, 396, 398, 399, 4215, 4220, 4225, 4235, 4245, 4255, 4260, 4270 Replaces Massey Ferguson OEM number 3762012M91, , Compatible with New Holland tractor models T5040, T5050, T5060, T5070, TD60D, TD70D, TD75D, TD80D, TD90D, TD95D, TD5050, TL70, TL80, TL80A, TL90, TL90A, TL100, TL100A, 5635, 6635, 7635, Replaces New Holland OEM number 5183938, Dimension 20-3/8" C-C 3-3/4", (Item #: 127273) $313.00

No
Picture
12" X 24" 8 Lug Front Wheel Rim - For Massey Ferguson tractor models 362, 365, 375, 390, 393, 396, 399, 4225, 4235, 4245, 4255, 4260, 4270, Replaces Massey Ferguson OEM number 3762012M91, 3700729M1, 8-11/16-221 MM Plot Hole, Additional Handling and Oversize Fees Apply To This Item, (Item #: 127274) $473.00

No
Picture
Differential Locking Plate, Left Hand - For Massey Ferguson tractor models 362 (With 4 Plate Wet Brakes), 365, 375, 383, 390, 390T, 393, 396, 398, 399, 461, 543, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, Replaces Massey Ferguson OEM number 1687863M3, Left Hand, (Item #: 173640) $200.00

No
Picture
Front Axle Housing Bushing - For Massey Ferguson tractor models 261, 340 (4WD side drive front axle), 342 (4WD side drive front axle), 350 (4WD side drive front axle), 355 (4WD side drive front axle), 360 (4WD side drive front axle), 362 (4WD side drive front axle), 365 (4WD side drive front axle), 375 (4WD side drive front axle), 383, 390 (4WD side drive front axle), 390T (4WD side drive front axle), 393, 396, 398 (4WD side drive front axle), 399 (4WD side drive front axle), 3050, 3060, 3065, 3070, 3075, 3080, 3085, 3090, 3095 (4WD center drive front axle), 3630 (4WD center drive front axle), 3635 (4WD center drive front axle), 3645 (4WD center drive front axle), 3650 (4WD center drive front axle), 3655 (4WD center drive front axle), 3660 (4WD center drive front axle), 3670 (4WD center drive front axle), 3680 (4WD center drive front axle), 3690 (4WD center drive front axle), 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4365, 4370, 5425, 5435, 5445, 5455, 5460, 5465, 5470, 5475, 5480, 6235, 6245, 6255, 6260, 6265, 6270, 6280, 6290, 6445, 6455, 6460, 6465, 6470, 6475, 6480, 6614, 6615, 6616, 7465, 7475, 7614, 7615, 7616, 7618, 8110, 8120, 8130, 8140, 8150, 8160, 8210, 8220, 8240, 8245, 8250, 8260 Replaces Massey Ferguson OEM number 3426938M1, , Compatible with McCormick tractor models MB75 (4WD), MB85 (4WD), Replaces McCormick OEM number 3426938M1, Inside Diameter: 1.58", Outside Diameter: 1.73", Length: 1.57", (Item #: 173815) $13.20

Front Lug Nut - Used on Ferguson and Massey Ferguson models 1100, 1130, 135, 148, 150, 165, 168, 175, 178, 180, 202 Indust/Const, 203 Indust/Const, 204 Indust/Const, 205, 20D Indust/Const, 20F Indust/Const, 2135 Indust/Const, 250, 253, 255, 263, 265S, 270, 271, 275, 281, 282, 283, 290, 30E Indust/Const, 30H Indust/Const, 3165 Indust/Const, 340, 342, 35, 350 Indust/Const, 352, 355, 360, 362, 365, 372, 375, 383, 390, 390T, 393, 396, 399, 40E Indust/Const, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50 Loader, 565 Combine, 575 Skid Steer Loader, 590, 65, 670, 675, 690, 765, 85, 90, F40, TE20, TEA20, TO20, TO30, TO35, the nut has 1/2 inch - 20 thread and is 1-1/16 hex head. Replaces 195489M1, 195490M1, S9512A. (Item #: 112060, Ref: 195490M1) $2.30

No
Picture
Spin-Out Rim Stop - For Massey Ferguson tractor models Super 90, TO35, 35, 50, 65, 135, 150, 165, 175, 180, 240, 282, 290, 298, 390, 398, 399, 670, 690, 698, 1080, 1100, 1130, 2640, 3050, 3060, 3070, 3090, 3630, 3650, 3680, 4225, 4235, 4245, 4255, 4270, 6150, 6170, 6180, 8120, 8140, 8150, 8160, Replaces Massey Ferguson OEM number 3531378M1, (Item #: 174311) $16.60

Wheel Clamp - Rear wheel clamp for power adjust rear rims.For tractor models 1080, 1100, 1130, 135, 150, 165, 175, 180, 240, 2640, 282, 290UK, 298, 3050, 3060, 3070, 3090, 35, 3630, 3650, 3680, 390, 398, 399, 4225, 4235, 4245, 4255, 4270, 50, 6150, 6170, 6180, 65, 670, 690, 698, 8120, 8140, 8150, 8160, Super 90, TO35. Also replaces p/n 1755057M2, 70235676. (Item #: 124526, Ref: 898021M1) $18.20

Universal Parts and Accessories
Category: Accessories / Supplies

Accessories / Supplies

Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Item #: 182644, Ref: MIS3127) $385.00

Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Item #: 178758, Ref: MBH1153) $97.00

Decals and Emblems

Ferguson Script Decal - 12 inches long, vinyl, blue and white. (Item #: 183045, Ref: R0735) $14.20

Ferguson Script Decal - 19 inches long, vinyl, green and chrome. (Item #: 178283, Ref: R0736) $25.80

Ferguson Script Decal - 26 inches long, vinyl, blue white. (Item #: 183046, Ref: R0737) $36.60

Massey Harris Trademark Decal - Red with yellow letters, 1-1/2 inches on vinyl. (Item #: 183092, Ref: R5190) $3.90

Massey Harris Trademark Decal - Yellow with red letters, 1-1/2 inches on vinyl. (Item #: 183072, Ref: R5191) $3.90

Massey Harris Trademark Decal - Red with yellow letters, 6 inches on vinyl. (Item #: 183101, Ref: R5192) $12.40

Massey Harris Trademark Decal - Yellow with red letters, 3/4 inch on vinyl. (Item #: 183066, Ref: R5236) $2.60

Massey Harris Trademark Decal - Red with yellow letters, 3/4 inch on vinyl. (Item #: 183098, Ref: R5237) $2.60

Electrical System

NOTE

Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 and newer). Just call us at 800-853-2651.

NOTE

No
Picture
Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Item #: 111377, Ref: 8NE10305SE) $96.00

Alternator Conversion Plug - Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Item #: 178026, Ref: ADR9209) $14.40

Alternator Pulley - Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Item #: 179552, Ref: AP3158) $97.00

Alternator Top Adjusting Bracket, Universal - Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Item #: 173326, Ref: 8NL10302) $25.20

No
Picture
Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Item #: BTW28) $35.98

No
Picture
Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Item #: BTW72) $53.81

No
Picture
Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Item #: 182583, Ref: 28010) $49.20

Generator Cutout - Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Item #: 105283, Ref: CB4014) $22.60

No
Picture
Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Item #: 179437, Ref: AL85) $5.60

Spark Plug - Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Item #: 182459, Ref: AL425) $4.80

NOTE

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!

NOTE

Starter Armature - Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Item #: 182636, Ref: 1871662) $93.58

Starter Drive - Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Item #: 111105, Ref: 1036519M91) $28.30

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182608, Ref: DELCO6) $16.80

Starter Solenoid - Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Item #: 105672, Ref: 1115510) $30.00

$Massey Ferguson 4270 Tag for Starter\Generator, 12 Volt, Blank$
Tag for Starter/Generator, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Item #: 182606, Ref: DELCO12) $16.80

Engine Gaskets

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Item #: 178141, Ref: PRM77BR) $10.90

Engine Parts

NOTE

Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).

NOTE

Engine Rings

NOTE

Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size and type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").

NOTE

Exhaust System

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 118823, Ref: ZNL89020C) $81.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119038, Ref: ZNL89025C) $108.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114858, Ref: ZNL89051C) $135.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Item #: 173286, Ref: 146520CHR) $106.00

Chrome Exhaust Stack - Single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Item #: 173287, Ref: 146490CHR) $161.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 114945, Ref: ZNL89057C) $145.00

Chrome Exhaust Stack - Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 119080, Ref: ZNL89485C) $174.00

Chrome Exhaust Stack - Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Item #: 173281, Ref: L102236CHR) $88.00

$Massey Ferguson 4270 Muffler Clamp, 1-1\4$
Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Item #: 182682, Ref: MC114) $2.10

$Massey Ferguson 4270 Muffler Clamp, 1-3\4$
Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Item #: 108866, Ref: MC134) $4.80

$Massey Ferguson 4270 Muffler Clamp, 1-3\8$
Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Item #: 182687, Ref: MC138) $2.90

$Massey Ferguson 4270 Muffler Clamp, 2-1\4$
Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Item #: 108870, Ref: MC214) $5.30

$Massey Ferguson 4270 Muffler Clamp, 2-3\4$
Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Item #: 108872, Ref: MC234) $8.71

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Item #: 108873, Ref: MC300) $7.40

$Massey Ferguson 4270 Muffler Clamp, 3-1\2$
Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Item #: 108874, Ref: MC312) $8.00

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Item #: 108875, Ref: MC400) $8.30

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Item #: 118841, Ref: MC500) $12.70

Rain Cap - This rain cap is for a 1.750 inch pipe. (Item #: 108632, Ref: R1799) $11.00

Rain Cap - This rain cap is for a 2.0 inch pipe. (Item #: 108633, Ref: R1800) $8.80

Rain Cap - This rain cap is for a 2.50 inch pipe. (Item #: 108635, Ref: R1802) $12.50

Rain Cap - This rain cap is for a 2.750 inch pipe. (Item #: 108636, Ref: R1804) $11.08

Rain Cap - This rain cap is for a 4.0 inch pipe. (Item #: 108645, Ref: R1807) $12.90

Rain Cap - This rain cap is for a 4.50 inch pipe. (Item #: 108749, Ref: WC14) $13.40

Rain Cap - This rain cap is for a 5.0 inch pipe. (Item #: 108750, Ref: WC15) $17.40

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 179749, Ref: ZNL90872A) $6.50

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Item #: 185428, Ref: ZNL90875A) $8.50

Fuel System / Air Intake

Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Item #: 151026, Ref: S.43231) $14.00

Carburetor Float, Zenith - This Float is used in the following Zenith Carburetors: 10277, 12188, 12199, 12205, 12234, 12236, 12238, 12253, 12384, 12389, 12535, 12599, 12654, 12744, 12956, 12982, 13096, 13201, 13206, 13238, 13309, 13355, 13371, 13386, 13405, 13415, 13420, 13452, 13453, 13492, 13549, 13605, 13646, 13653, 13665, 13694, 13705, 13713, 13719, 13720, 13727, 13729, 13730, 13733, 13800, 13803, 13805, 13822, 13825, 13851, 13861, 13862, 13865, 13873, 13878, 13879, 13880, 13902, 13903, 13910, 13933, 13957, 13971, 13975, 13983, 14002, 14017, 14019, 14044, 14086, 14094, 14096, 14099, 14100, 14115, 14133, 14147, 14175, 14178, 14179, 14183, 14993 (Item #: 108454, Ref: C85-103-S) $17.00

Fuel Line Sleeve, Pack of 10 - 7/16 inch outside diameter x 1/4 inch inside diameter x 1/4 inches wide. Replaces 33811113, 3637441M91, 376525X1, 3638466M91 (Item #: 158879, Ref: 376525X1) $4.10

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Item #: 114940, Ref: R7949) $9.92

$Massey Ferguson 4270 Sediment Bowl Gasket, 2-1\8 inch$
Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Item #: 112364, Ref: C1778R) $3.30

Throttle Linkage - Universal. Adjustable length ranges from 6 3/8 to 6 5/8. Rod can be cut and either re-bent or re-threaded if a shorter length is required. (Item #: 173108, Ref: 1876343M92) $14.60

Gauges

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Item #: 178318, Ref: HM771) $63.00

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Item #: 178285, Ref: S.52672) $42.30

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Item #: 179540, Ref: 919095) $16.00

Hitch / Drawbar

Bracket Stabilizer - Bracket, used with telescoping stabilizer 539881M2TSK. (Item #: 178304, Ref: 514992M2) $46.00

Drawbar - Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Item #: 103174, Ref: 180485M1) $42.10

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $12.17

No
Picture
Level Box Assembly - Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle and hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Item #: 110256, Ref: HLBMF61) $70.00

Top Link Assembly, OEM Style - Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Item #: 182641, Ref: 184134M91) $90.00

Top Link Assembly, OEM Style - Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Item #: 182642, Ref: 1690177M91) $68.00

Top Link Assembly, OEM Style - Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Item #: 182643, Ref: 184361M91) $89.00

Top Link Assembly, OEM Style - Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Item #: 182645, Ref: 194376M91) $90.30

Top Link Assembly, OEM Style - Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Item #: 170303, Ref: 894377M1) $90.00

Top Link Assembly, OEM Style - Category 2-2, 18-3/4 inch Length of center tube. (Item #: 182650, Ref: 893438M91) $81.00

Top Link Assembly, OEM Style - Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Item #: 184676, Ref: 1887285M91) $60.00

Top Link, Cat I and Cat II - Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Item #: 112122, Ref: JSA1200R) $29.20

Top Link, Cat II - Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Color varies depending on availability. (Item #: 182649, Ref: JSA2024R) $89.00

Top Link, Cat II, Red - Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Item #: 184552, Ref: 30108E91) $77.00

Top Link, Cat I, Red - Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Item #: 182651, Ref: JSA1024R) $76.00

Top Link, Hydraulic - Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 9/16 inch UNF port size. (Item #: 183653, Ref: B8106) $257.00

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $29.62

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Implements

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Item #: 170217, Ref: BH1317) $14.90

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 114630, Ref: 22) $5.90

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Item #: 169771, Ref: 170BH) $7.86

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Item #: 173612, Ref: 12269) $183.00

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Item #: 161111, Ref: BH215) $132.00

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Item #: 180514, Ref: 63813BH) $38.10

Hub with Bearing Cups - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Item #: 182627, Ref: BH1311) $49.30

No
Picture
Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Item #: 182589, Ref: 221129) $51.00

No
Picture
Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Item #: 182592, Ref: 241100) $91.48

No
Picture
Round Bale Tine 43 Inches - Fully Hardened. (Item #: 182594, Ref: 241166) $111.54

No
Picture
Round Bale Tine 49 Inches - Fully Hardened. (Item #: 152690, Ref: 241162) $78.00

No
Picture
Round Bale Tine 55 Inches - Fully Hardened. (Item #: 182593, Ref: 241163) $131.61

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Item #: 180300, Ref: 30BH) $4.30

Tail Wheel Assembly - 4 inch x 8 inch tail wheel assembly with laminated tire. 3-5/8 inch pilot, 4 bolt holes, 5 inch bolt circle, 3-3/4 inches wide, 15 inch outside diameter. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 and 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Item #: 111222, Ref: 500BH) $56.00

No
Picture
Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Item #: 107928, Ref: TP19000TP) $22.10

Lights

Headlight Kit, 12 Volt, LH, Chrome Ring - Kit contains 6" steel body, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 186851, Ref: S.43374) $102.00

Headlight Kit, 12 Volt, RH, Chrome Ring - Headlight Kit contains 6" steel, sealed beam bulb, chrome headlight ring, springs 4, wing, and screws 2. (Item #: 187205, Ref: S.22341) $106.00

Headlight Kit, 6 Volt, LH - Headlight assembly includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (LH), Primered. Assembly required. (Item #: S.43370) $98.00

Headlight Kit, 6 Volt, RH - Includes, headlight 6" steel body, sealed beam bulb, headlight ring, bulb retaining clips, winged headlight bracket (RH), Primered. Assembly required. (Item #: S.22342) $101.00

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Item #: 114720, Ref: AA4667R) $16.60

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Item #: L200MAGH) $75.13

Work Light 12V - Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Item #: 173803, Ref: L408-12V) $38.40

Miscellaneous

Air Cond Comp - New Air conditioning compressor, replacement for Frigidaire A-6 compressor. Includes 5.58" dia. clutch and dust cover, high pressure relief valve. With 12V coil at 10 Oclock, SAE thread. Less superheat switch (comes plugged with non-functional heat switch. For tractors that have air conditioning systems using the Frigidaire A-6 compressor already. (Item #: 109093, Ref: 1904014M92) $430.00

Deluxe Canopy, 3 Bow - This universal Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Item #: 178876, Ref: RFC100B) $245.00

Hand Cleaner, Gallon - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Item #: 180453, Ref: PRM25218) $24.60

Tractor Umbrella with Frame & Mounting Bracket - Red - Complete umbrella consisting of a cover, bracket and frame, 54" x 54" cover made of 10 oz. duck canvas with leather reinforcements and steel grommets, Metal parts are zinc-coated for long-lasting, maintenance-free service, Rigid framework for cover is built to withstand farm and industrial use, Installs easily, folds down for trailering and removes in seconds without tools, (Item #: 161193) $123.00

Paint

44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Item #: 183950, Ref: JDV-02250) $24.00

No
Picture
Paint, Aluminum High Heat Spray Can - 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP402HHSP_) $8.50

No
Picture
Paint, Aluminum, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100244, Ref: TP312SP) $8.50

No
Picture
Paint, Clear Coat, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108409, Ref: TP447GAL) $65.00

No
Picture
Paint, Clear Coat, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108408, Ref: TP447QT) $30.00

No
Picture
Paint, Dark Gray, 1 Gallon - This Dark Gray was used on Ferguson Implements from 1939 through 1948. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Fords (1939-1947). Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108333, Ref: TP2888GAL) $57.00

No
Picture
Paint, French Silver Mist Gray, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108364, Ref: TP750GAL) $71.00

No
Picture
Paint, French Silver Mist Gray, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108363, Ref: TP750QT) $27.00

No
Picture
Paint, French Silver Mist Gray, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108362, Ref: TP750SP) $11.40

No
Picture
Paint, Gloss Black, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100116, Ref: TP550GAL) $53.00

No
Picture
Paint, Gloss Black, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100115, Ref: TP550QT) $24.00

No
Picture
Paint, Gloss Black, Spray Can - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100114, Ref: TP550SP) $8.70

No
Picture
Paint, Gray Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100121, Ref: TP2700QT) $22.40

No
Picture
Paint, Gray Primer, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Item #: 100120, Ref: TP2700SP) $8.30

No
Picture
Paint, Industrial Yellow, 1 Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184671, Ref: TP540GAL) $150.00

No
Picture
Paint, Industrial Yellow, 1 Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP540QT) $61.00

No
Picture
Paint, Light Gray, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108367, Ref: TP235GAL) $90.00

No
Picture
Paint, Light Gray, 1 Quart - OEM quality. TO35 Sheet Metal 1954-56 and implements after 1954. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108366, Ref: TP235QT) $35.00

No
Picture
Paint, Light Gray, Spray Can - TO35 Sheet Metal 1954-56 and implements after 1954. From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108365, Ref: TP235SP) $11.00

No
Picture
Paint, MF Red, 1 Gallon - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102660, Ref: TP300GAL) $53.00

No
Picture
Paint, MF Red, 1 Quart - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102659, Ref: TP300QT) $22.10

No
Picture
Paint, MF Red, Spray Can - This Massey Ferguson Red was used from 1956 through 2008. It is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 102658, Ref: TP300SP) $7.70

No
Picture
Paint, MH Red, 1 Gallon - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108370, Ref: TP340GAL) $56.00

No
Picture
Paint, MH Red, 1 Quart - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108369, Ref: TP340QT) $24.00

No
Picture
Paint, MH Red, Spray Can - This Massey "Old Red" was used from 1956 through 1965. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108368, Ref: TP340SP) $10.20

No
Picture
Paint, Red Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100119, Ref: TP3987GAL) $59.00

No
Picture
Paint, Red Primer, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100118, Ref: TP3987QT) $24.00

No
Picture
Paint, Satin Black, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100254, Ref: TP225QT) $24.00

No
Picture
Paint, Satin Black, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 100253, Ref: TP225SP) $8.50

No
Picture
Paint, Straw Yellow, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108373, Ref: TP345GAL) $138.00

No
Picture
Paint, Straw Yellow, 1 Quart - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108372, Ref: TP345QT) $61.00

No
Picture
Paint, StrawYellow, Spray Can - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 108371, Ref: TP345SP) $10.90

No
Picture
Paint, Yellow Primer, 1 Gallon - From Tallmans, formulated by Van Sickle, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Paint cannot be shipped to California due to California Regulations. All Paint can only ship UPS Ground. (Item #: 184741, Ref: TP2720GAL) $84.67

No
Picture
Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116GAL) $68.39

No
Picture
Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Item #: BL116KIT) $99.22

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Item #: 185598, Ref: E844R) $40.01

PTO / Driveline

Coupler Repair Kit - Coupler repair kit, services all Hub City over-running couplers. Contains keys, roll pin, set screw, springs, spacer, and retaining ring. (Item #: 182663, Ref: CRK600) $91.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Item #: 180775, Ref: AB4111WY) $174.00

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Item #: 124815, Ref: AB4111K33) $339.00

NOTE

PTO Adapter - PTO adapters are located under the PTO category in the Accessories and Universal Parts section.

NOTE

PTO Quick Release Pin - PTO quick release pin fits MOST American yokes. Replaces: 1810351M91, QDK1, QDK1M. (Item #: 112246, Ref: 1810351M91) $5.40

PTO Safety Clutch, 40 HP - 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Item #: 183648, Ref: B9164) $268.00

Seats

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft and lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up and angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Item #: TS5056V) $1518.86

No
Picture
Seat Cover (Red and Yellow) - Tie-on for 19 inch wide pan seat. For Tractors that have a Red and Yellow color scheme. (Item #: XYFR30RY) $31.50

Tie-On Seat Cover - Grey, 19 inches wide. Deluxe with 2 inches of foam. This fits a PAN seat. (Item #: 178997, Ref: R2600) $56.00

Universal Seat - Color: Yellow - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Item #: 101375, Ref: TS1040ATSP) $100.00

Sheet Metal / Body Parts

Bumper - Bumper assembly, mounting arms NOT included. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Item #: 178311, Ref: BU10211R) $134.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Item #: 165963, Ref: R0140) $41.19

Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

Tools

No
Picture
Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Item #: 183798, Ref: S.29891) $23.10

No
Picture
Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Item #: 180261, Ref: S.58474) $287.00

Tractor Manual Search - Yesterday's Tractor Co.

Wheels

Front Rim - This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Replaces: 183027M91, 509893M91 (Item #: 103768, Ref: FW60166) $92.00

Front Rim - This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Replaces AL82488, A38404, C7NN1007J, D2NN1007N, D2NN1007S, D8NN1007BA, E1ADDN1015B, E1ADKN1015A, E6NN1007BA, G57046, K914312, K921475, K947941, VPH6001, 1660769M1, 1678319M91, 1678319M92, 1691618M92, 1691618R92, 1883333M92, 3114166R91, 509893M1, 509893M91, 57512110, 70000-00028, 751734R91, 82005056, 83900159, 83954658, 83960327, 9A306 (Item #: 116854, Ref: FW55166) $78.00

Rim 10X28 - This rim measures 10 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. May come Painted primer or aluminum or off white color. Replaces 180863M91. (Item #: 103719, Ref: NCA1020B) $132.00

Rim 11X28 with 6 Loop Clamps - This rim is 11 inch x 28 inch demountable rim with 6 loop clamps. Loops are designed for 5/8 inch bolts. Painted aluminum color. Shipped via truck Add $25.00 extra shipping per rim due to weight. Replaces 535450M91. (Item #: 104209, Ref: C5NN1050E) $147.00

Rim, 12X24 - Rim, 12 x 24 demountable rim for 13 x 24 or 14 x 24 tires. Add $52.95 extra shipping due to weight. 6 Loops, these measure 20 1/4 inches center-to-center across from one another. Uses special S.04352 bolt and nut kit. (Item #: 108579, Ref: 535454M91) $140.00

Tire Inner Tube - This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Item #: 118299, Ref: 500X15TB) $17.15

Tire, Three Rib - Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. (Item #: 118213, Ref: 550X16) $107.00

Tire Tube - For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Item #: 118295, Ref: WHS050) $19.10

No
Picture
Tire Tube 24 Inch - This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Item #: 178957, Ref: WHS059) $57.00

No
Picture
Tire Tube 28 Inch - This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Item #: 158249, Ref: WHS058) $64.00

No
Picture
Tire Tube 28 Inch - This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Item #: 178895, Ref: WHS061) $111.00

No
Picture
Tire Tube 32 Inch - This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Item #: 184736, Ref: WHS062) $67.00

No
Picture
Tire Tube 38 Inch - This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Item #: 183819, Ref: WHS064) $82.00