(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 4020 Tractor Parts

[ Show Pictures ]

[Show Categories]   [Show all John Deere Models]   [Printer Friendly]  


Brakes
Brake Pads for Disc/Rotor Type Brakes - For models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc/Rotor Type Brakes. Sold in lots of 3, priced per each pad. 2.5" x 6.5" Pad. (Part No: AR28487) $16.00

Brake Plate - 15 Diameter - 15 Teeth, .220 thick. Use with Brake Shaft R56731, R59928, R62685, and R67198 For 4000, 4020, 4040, 4050, 4230, 4240, 4250, 4320, 4430. **PLEASE VERIFY THICKNESS NEEDED FOR YOUR APPLICATION*** (Part No: R62686) $54.00

Brake Plate - 15 Diameter - 15 Teeth Use with Brake Shaft R33431 and R45799 For 4000, 4020, 4230, 4320, , 4430, 4440. (Part No: R78430) $75.24

Planetary Brake Kit - Kit includes 16 friction discs, 16 separator plates, and 12 seals. For models 4000, 4020 covers all serial numbers. (Part No: PBK520) $1609.40

Clutch
Clutch Adjusting Tool - For models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 7020. (Part No: 830602) $59.59

Clutch Alignment Tool - 1-1/4" 19 spline, 1-7/8" 29 spline, .67" pilot. For models 4000, 4010, 4020. (Part No: S.70915) $24.95

Clutch Bearing - For models 2510, 2520, 3020, 4000, 4010, 4020. (Part No: TP-AM3983T) $22.68

Clutch Disc - Lined clutch disc~ remanufactured. 12 diameter, 1-1/4 hub, 19 spline, woven facings, tractors: 4000, 4010, 4020. Replaces R32049R. For 4000, 4010, 4020 (Part No: TP-AR42127) $123.00

Clutch Disc, 13", Spring Loaded, Organic - 1.250" spline dia., 19 spline. For models 3020, (4000 SN# 201000 and up), 4020, 4230, 4240, (4430 SN# 022373 and up) all with powershift. (Part No: RE29607) $445.32

Clutch Spring Kit - Includes 15 inner springs (R38185), 15 outer springs (R26637) and 3 PTO return springs. For models 3010, 3020, 4000, 4010, 4020. (Part No: R41414) $49.98

PTO Clutch Disc - PTO clutch disc, new, 11 diameter, 1-7/8 hub, 29 spline, with woven facing. For tractors: 4000, 4010, 4020, 4320. For 4010, 4020 (Part No: TP-AR26688) $86.75

Pilot Bearing - .6693" I.D. For models 2840, (3010 synchro range), (3020 power shift & synchro range), (320 SN# 321209 and up), (3300 early), 40, (4000 power shift SN# 201000 and up), (4000, 4010 synchro range), 4020, 40C, (4230, 4240 power shift), 430, 4320, 435, 440, (4430 power shift SN# 022373 and up), 45, 4520, 4620, (4630, 4640, 4840 power shift), 5200, 5300, 5400, 55 single, 5500, (7020 synchro range), 830, 95, M, MT. (Part No: JD9449) $3.79

Release Bearing - Clutch Release Bearing For models 105, 3020 Power Shift, 3300, 40, (4000 Power Shift SN# 201000 and up), (4000, 4010 synchro range), 4020, (420, 430 SN# 100000 and up continously running PTO), 4320, 435, 440, 4400, 45, (55 single), 6600, 6620, 7700, 7720, 95, M, MT. Replaces: AM3983T, AR41942, AL2116, AL2116T (Part No: AR41942) $23.56

Remanufactured Clutch Kit - Clutch kit, for transmission and PTO clutch. Includes remanufactured pressure plate assembly, 12 with 11 PTO disc, 29 spline, 1-7/8 hub~ remanufactured clutch disc, 12, 19 spline, 1-1/4 hub, woven lining~ new clutch and PTO release bearings(2) and For models 4010, 4020. Refundable $110.53 core charge will be added to your order. *** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED.*** (Part No: TP-R41411K) $995.39

Syncro Disc - 3.250" I.D., 4.225" O.D.. For models (2010, 2520, 4000, 4010, 4020, 4430 with syncro range), (4030 with syncro/quad), (4230 with syncro/quad SN# up to 037595), (4430 with syncro/quad up to SN# 066737). (Part No: RE37104) $13.11

Transmission Plate - 4.125" O.D., 3.152" I.D.. For models (2010, 2520, 4000, 4010, 4020, 4430 with syncro range), (4030 with syncro/quad), (4230 with syncro/quad SN# up to 037595), (4430 with syncro/quad up to SN# 066737). (Part No: R27727) $6.20

Cooling System
Block Heater Engine - Engine coolant heater 12 cord. 1000 watt, 120 volt. Fits 2 diameter smooth bore core hole. For 400 and 500 series engines including: 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430, 8440, 8630, For 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6620, 7020, 7520, 7700, 7720, 8430, 8440, 8630, 8640, 8820 (Part No: TP-AR50518) $89.63

Fan Belt - Drive belt for fan, generator and water pump. For gas: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26606R. (Part No: R41627) $6.66

Fan Belt - Drive belt for fan, generator and water pump. For dsl: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26607T. For 3010, 3020, 4010, 4020 (Part No: TP-R41628) $25.82

Fan Blade, 5 Blade - 21" dia., 1.5" pilot hole, 8 mounting holes on 1" centers. For models 4000, 4010, 4020, (4230 without ac). (Part No: AR34451) $129.14

Radiator - For 4000 (serial # 201000 up), 4020 both gas or diesel. Replaces AR40832, AR46434. (Part No: AR49454) $465.08

Radiator Cap - For models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630. Also replaces AR28482. (Part No: R27209) $17.95

Radiator Hose Lower - Hose, radiator lower. For tractors: 3010, 3020, 4000 less AC, 4010, 4020. For 3010, 4010 (Part No: TP-R26472) $15.68

Radiator Hose Lower - Radiator HOSE LOWER For 4020 (Part No: TP-R45982) $13.04

Radiator Hose, Upper - For models 3010, 3020, 4000, 4010, 4020. (Part No: TP-R26475) $13.04

Thermostat - 180 degree. For models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, 500B, 5010, 5020, 600, 6030, 700A, 760, 760A. (Part No: R36846) $12.50

Thermostat Housing - For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 5010, 5020, 6030. Thermostat Housing. duplicate (Part No: AR44840) $75.49

Thermostat Housing - For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 5010, 5020, 6030. Thermostat Housing. (Part No: AR44840) $75.49

Water Pump - For models 3010, 3020, 4000, 4010, 4020 All Diesel without AC. Replaces casting numbers R26337, R27547, R34977, R34982, R41315, R41318, R44122. (Part No: AR45332) $112.98

Water Pump - For 3010, 3020, 4010, 4020, all Gas/LP Less Air Conditioning. Water Pump. Replaces casting #'s: R44117, R34976, R34981, R41313, R41317, R44116, R44119. NOTE: THIS PUMP WILL WORK WITH A CAST PULLEY, IF YOU ARE USING A STAMPED STEEL PULLEY IT WILL RIDE DOWN TOO FAR ON THE SHAFT AND HIT THE HOUSING. THIS PROBLEM CAN BE SOLVED BY ORDERING A SPACER, PART# R52833. (Part No: AR45330) $126.74

Water Pump Bearing - For models 3020, 4000, 4020. Used on the following water pump: AR45332. (Part No: TP-JD9355) $21.52

Water Pump Kit without Impeller - Used on pumps marked with R27547, R34977, R34982, R26337. For models 3010, 3020, 4010, 4020. (Part No: MX9212) $35.85

Water Pump Repair Kit - For 3020 SN# 123000 and up, 4000 & 4020 SN# 201000 and up. ``New water pump repair kit WITHOUT impeller that fits multiple John Deere Tractor or Combine models. This repair kit is for water pumps marked R44122, R41318, R41315. Please verify OEM part number BEFORE ordering. (Part No: WPK664) $35.20

Decals and Emblems
Decal Set - COMPLETE Decal Set for John Deere Model 4020. Does not include Syncro-Range or Powershift decals, See Item AR52393. (Part No: R2610) $29.25

Hood Ornament - For models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. (Part No: AR28047) $29.95

Side Hood Emblems, OEM Set - 37" in length with 5 mounting studs. Mounting is speed nut type, no threads. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Side molding with RAISED Letters. Includes Right and Left Pair. (Part No: R2533) $135.68

Side Hood Molding - Left - 37" in length with 5 mounting studs (Fasteners NOT included). Green lettering, yellow background. Inside lettering is a decal. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 7020. Side molding with Decal - Left Side. (1526R) (Part No: AR28049) $49.32

Side Hood Molding - Right - 37" in length with 5 mounting studs (Fasteners NOT included). Green lettering, yellow background. Inside lettering is a decal. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 7020. Side molding with Decal - Right Side. (1525R) (Part No: AR28048) $49.32

Syncro-Range and Power Shift Decal Set - Set covers those decals that are different than the normally used set when used for the Syncro-Range and Power Shift Models. For 2510, 2520, 3010 before SN# 049999, 3020U, 4000 after SN# 201000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (Part No: AR52393) $33.96

Drive Train
Drum, Hi-Low Range - For models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Part No: R31026) $111.40

Gear Shift Lever - For models 2510, 2520, 3010, 3020, 4010, 4020, 4000, 4320. Replaces R27633. (Part No: R46285) $73.15

Shift Collar - For models (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 440D, 448D, JD440, JD440A, JD440B all syncro range), (4030 SN# up to 015963 syncro range), (4230 syncro range up to SN# 037595). Replaces R26074, R62806. (Part No: R33383) $121.36

Shift Collar, Planetary - For models 4010, 4350, (4000, 4020, 4320 all syncro range), (4040, 4230, 4240, 4430 all syncro & quad range), (4440 quad range), (JD600 collar shift). (Part No: R26066) $75.50

Synchronizer - For models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro & quad range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Part No: R31028) $126.83

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Part No: AR75603) $12.76

Electrical System
12 Volt Conversion Kit - Converts 24 Volt systems to 12 Volts on 3010, 3020, 4010, 4020. Kit includes: New 12 Volt starter, Alternator, bracket, battery cables & wiring, solenoid, instructions. Note: converts use to a single 12volt battery. Replaces SE501474, TY16172. (Part No: TS-8000) $431.93

Alternator - Remanufactured alternator with heavy duty internal regulator. 80 amp~ 2 terminal. For tractors: 4020, 4030, 4230, 4320, 4430, 4620, 4630, 6030, 7020, 7520, 8430, 8630~ Combines: 3300, 4400, 4420, 6600, 6602, 6620, 6622, 7700, 7720, 8820. Forage harvesters: 5200, 5400. Replacement For 1020, 2020, 2510, 2520. (Part No: TP-TY6600) $101.25

Alternator - 12 volt, 51 amp. For models (6000 1975-79 with 219 dsl), (600, 600A 1973-78 with 152 dsl), (700, 734 1973-78), (3020 1969-72 with 240 gas or 270 dsl), (4020 1969-72 with 360 gas or 404 dsl), (4320, 4520, 4620 1969-73 with 404 dsl), (5020 1966-72 with 531 dsl), (6030 1970-77 with 531 dsl), (7020 1971-75 with 404 Turbo dsl), (7520 1971-75 with 531 dsl), (880 1970-80 with 180/135 gas or 202 dsl), (2250 1975-78 with 225 chrysler gas), (2270 1975-78 with 219 dsl), (2280 1975-85), (2320 1981-83 with 219 dsl/225 chrysler gas), (2420 1975-85 with 219 dsl /225 chrysler gas), (3430, 3830 1985-92). Replaces RA12NJD604. (Part No: AMO0013) $223.28

Alternator - 12 volt, 72 amp. For models (H155 1972-73 with 531 dsl), 544, (5200 1974-77 with 404 dsl), (5400 1974-77 with 531 dsl), 5420, (5440 1977-82 with 404 dsl), (5460 1977-82 531 dsl), (5720 1982-86 with 466 dsl), (5820 1982-86 with 619 dsl), (4020 1971-72 with 360 gas or 404 dsl), (4030 1977-78 with 329 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4230 1977-78 with 404 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4320 1969-73 with 404 dsl), (4430 1977-78 with 404 dsl), (4440 1978-82 with 466 Turbo Dsl), (4450 1983-90 with 466 dsl), (4620 1969-73 with 404 dsl), (4630 1977-78 with 404 dsl), (4640 1978-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (6030 1970-77 with 531 dsl), (7520 1971-75 with 531 dsl), (8630 1975-78 with 619 dsl). replaces 1100490, 1102932, 1100287, 11013128, 1102926, 1105174, SE501382, TY6600, TY6772. (Part No: ADR0133) $123.38

Alternator - 12 volt, 72 amp. For models (3300 with 219 DH03 or GH01 engine), (4000 up to SN# 263481 with air), (4020 SN# 201000-263481 with air), 4400, 55, 6622, 7700, (4520 with air), (4620 up to SN# 014117 with air), (6600 SN# 206201 and up), (6602 SN# 212801-353900), (6620, 7720, 8820 up to SN# 600000), (7020 up to SN# 002263), (7440 up to SN# 1000), (9910 SN# 3056 and up), (9920 up to SN# 380, (9940 up to SN# 1500). Replaces TY6603, AR43989, AH10552D. (Part No: TY24309) $175.49

Alternator, Delco Type, 12 Volt - For 105, 111, 115, 145, 165, 215, 217, 248, 3010, 3020, 4010, 4020, 45, 55, 95. Replaces Delco # 1100305. Remanufactured. Refundable $25.00 core charge will be added to your order. (Part No: TG-59) $213.92

Alternator, New - 12 volt, 78 amp. For models (4000, 4020 SN# 263481 and up with air), 4030, 4230, 4240, 4430, 4440, 4630, 4640, 4840, (4040 with out cab), (4050, 4250, 4450, 4650, 4850 with roll guard), (4620 SN# 014118 and up), (6030 with air), (7020 SN# 002264 and up), (8430 up to SN# 006278), (8630 up to SN# 008619) (Part No: TY6686) $99.13

Battery Cable - Battery Cables: 720D, 730D with electric. start~ 3010D Row crop right hand~ 3010 Std. right hand to SN# T19800, 3020D row Syn. Range right hand to SN# 1T67999, 4010D Row & Hi Corp right hand~ to SN# 1T67999, 4010D Row & Hi Corp right hand to SN# 4010D Standard For 3010, 3020, 4010, 4020, 720, 730 (Part No: TP-AR20216) $41.84

Battery Cable - Battery Ground Straps. 3010, 3020, 4010, 4020 Gas, left hand on diesel. 1 guage, length 10, terminal type Std. For 3010, 3020, 4010, 4020 (Part No: TP-AR26619) $15.94

Battery Cable - Battery Cables. 300D, 3020D, 4010D, 4020D right hand. Only on diesels. 2 guage, length 61, terminal type 1-3+. For 300D, 3020, 4010, 4020 (Part No: TP-AR26621) $38.12

Battery Cable - For models 3010, 3020, 4010, 4020 left hand, only on diesels. 2 guage, length 38, terminal type 1-3+. (Part No: AR28950) $17.98

Battery Cable - Battery Ground Straps. 2510, 3010D, 3020D, 4010D, 4020D to SN# 2T90999, 5010D to SN# 3T7999. 1 guage, length 10, terminal type Std. For 2510, 3010, 3020, 4010, 4020, 5010 (Part No: AR26622) $10.46

Cab Accessory Relay - 12 Volt cab and accessory relay~ Used on: 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240 tractors~ 2420 windrowers~ 4310 beet harvester~ 85 row crop cultivator. (Part No: TP-AR54484) $36.93

Coil, 6V - Distributor coil, 6 volt. Delco Remy equipped. For models B, M, 40, 50(after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M (Part No: TP-AM373T) $24.48

Distributor Cap - 4 Cylinder Distributor SCREW TYPE CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Part No: 1960833) $10.92

Distributor Cap - 6 Cylinder Distributor CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Part No: TP-R11271) $11.26

Distributor Cap - For 4010, 4020 with Delco-Remy Distributor #1112466 or 1112624. (Part No: R1953) $10.50

Electronic Ignition Conversion Kit, 12 volt negative ground - For Tractor Models 4010, 4020 with 302, 340 eng., 4020 with 362 eng using Delco distributor # 1112624 & 1112466 Electronic ignition conversion kit, replaces points and condenser with an electronic module. Use on 12 volt negative ground system. (Part No: 1163A) $72.89

Electronic Ignition Conversion Kit, 12 volt positive ground - Use on the following tractors: 4010 and 4020 with 6-cylinder engine sizes 302, 340, 362 using Delco distributor # 1112624 & 1112466. Electronic ignition conversion kit by Pertronix. Replaces points & condenser with an electronic module. Used Only on tractors with 12 volt POSITIVE ground systems. (Part No: 1163AP12) $81.26

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For models 4010, 4020 with 302, 340 eng., 4020 with 362 eng. (Part No: 91163A) $103.57

Ignition Kit, Delco Screw-Held Distributor Cap - Ignition KIT for Delco distributor with screw held cap with ROTOR For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Part No: ATK10DSR) $14.18

Ignition Switch with 2 Keys - 6 Terminal. For models 2510, (5010 SN# 008000 and up), (3020 SN# 68000 to 122999), (4020 SN# 910000 to 200999), (520 up to SN# 24999), (JD500 SN# 68000 and up), (JD500A up to SN# 123113), (JD600 SN# 91000 and up). (Part No: AR39505) $22.94

Key Switch, 6 Terminal - With key. For models (1010 gas or LP up to SN# 51039), (2010 gas/LP up to SN# 055380), (3010 gas/LP), (3020 gas/LP up to SN# 067999), (4010 gas/LP), (4020 gas/LP up to SN# 090999). (Part No: AR26528) $38.40

Key Switch, 6 Terminal - With keys. For models (3010 diesel), (3020 diesel up to SN# 67999), (4010 diesel), (4020 diesel up to SN# 909990, (5010 up to SN# 7999), 8020. (Part No: AR26557) $33.75

Light Switch, 12 Volt - 4 position, 5 terminals and fuse, .50" thread dia. For models 1010, 1020, 1520, 2010, 2020, (2030 SN# up to 187300), 3010, (3020 SN# up to 067999), 4010, (4020 SN# up to 090999), 300, 301, (310 SN# up to 255718), 400, 401, (410 SN# up to 255718), (500 SN# up to 067999), (600 SN# 65000 to 90999), 760. (Part No: AR28401) $29.79

Relay, Cab and Accessory - 12V, 80 amp contact rating relay. For models 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240. (Part No: TPAR54484) $32.17

Starter - 12 volt, 11 tooth, clockwise rotation, externally rotatable nose. For models (105 1963-70 with 404 dsl), (3020 1969-72 with 270-4cyl dsl), (6602, 7700 1971-74 with 404 dsl), (4000, 4020, 3020 1969-72 with 404 dsl), (4030 1973-74 with 329 dsl), (4230 1973-75 with 404 dsl), (4320 1969-73 with 404 dsl), (4430 1973-75 with 404 dsl), (4520, 4620 1969-73 with 404 dsl), (4630 1973-75 with 404 dsl), (7020 1971-75 w. 404 turbo dsl). Replaces 1113656, 1113402, 1113672. (Part No: SDR0076) $237.53

Starter - 24 Volt, for Diesel Tractors 3010, 3020, 4010, 4020. Starter assembly (CW rotation 10 tooth) with solenoid for 24 volt system. Can replace original Delco 1113148. An additional $75.00 will be added to your order for the core charge. This is refunded when you return the core. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1113148) $533.75

Starter - Internally rotatable nose. For Diesel Tractors 3020 SN# 123000 & up, 4000, 4020 SN# 201000 & up, 4030, 4230, 4320, 4520, 4620, 7020. Starter Assembly with new solenoid for 12 volt system. Can replace original Delco 1113402, 1113672 and TISCO starter 83701-EX. Add $ 90.00 Core Charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1113402) $319.62

Starter Drive - Starter drive for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: TP-AR54992) $65.19

Starter Drive - Starter Drive assy. for Delco Remy starters in gas tractors: 3010, 3020, 4000, 4010, 4020, 4030, 4230 skid-steer loader~ 125~ engine 400 & 500, used with Delco starters 1107785, 1108289, 1109147, 1109434. Replaces starter drives AR11108, AT15140 For 125, 3010, 3020, 4000, 4010, 4020, 4030, 4230. (Part No: TP-AR57094) $36.57

Starter Drive - Starter Drive assy. For Delco-Remy starters in diesel tractors: 3010, 3020, 4010, 4020. Used with Delco starters 1113148, 1113190. Can replace AR11133~ AR84239. 10 teeth.{Remanufactured} For 3010, 3020, 4010, 4020 (Part No: TP-AR88880) $37.68

Starter Drive - Positork Starter Drive. For Delco-Remy starters in diesel tractors: 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 7020, 8430~Combines: 6600, 7700. Used with Delco starters 1113148, 1113190, 1113391, 1113402 For 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 6600, 7020, 7700, 8430 (Part No: TP-AR88880PT) $42.54

Starter Drive - 10 teeth. Replaces AR44700. Used with starters 1113402, 1113672, 1113391. For models 180 with diesel eng., 3020 SN# 123000 and up, 4000 SN# 201000 and up, 4020 SN# 201000 and up, 4030, 4230, 4320, 4430, 4520, 4560, 4620, 6600, 6602, 7020, 7700, 8430. (Part No: AR88880) $25.42

Starter Solenoid - Starter Solenoids. Solenoid assy~ services 1113135 & 1113148 on model 3010D, 3020D, 4010D, 4020D. 24 volt {B}. For 3010, 3020, 4010, 4020 (Part No: TP-AR40395) $43.36

Starter Solenoid - Solenoid for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: TP-AR54991) $55.58

Starter Solenoid - Starter Solenoids. Solenoid assy~ flange mount, services starters 1107879 or 1107577 on 1010, 2010 gas~ 1107339 on 2510~ 1107350 or 1107578 on 3010, 3020, 4010, 4020 replaces Delco 1114356, 1114256, R11240. 12 volt {A} For 1010, 2010, 2510, 3010, 3020, 4010, 4020 (Part No: TP-AR68304) $20.60

Switch, Dimmer - Dimmer switch, for tractors: 2520 SN# 022001 and up, 3020 SN# 123000 and up, 4000, 4020 SN# 250001 and up, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 SN# 030001 and u For 4030, 4230, 4430, 4630 (Part No: AR48725) $23.50

Voltage Regulator - For models (3020 with air), (4000, 4020 with air and SN# 250001-263481), (4320 with air and SN# up to 019504), (4520 with air), (4620 with air and SN# up to 014117), (5020 with air and SN# 030329 and up), (6030 with air), (7020 with air and SN# up to 002263), 350C, 350D, 355D, 450E, 455E, (544, 544A both Duboque SN# 121500 and up or Welland SN# 85200 and up), 550B, 555, 555B, (570, 570A with engine SN# 130706 and up), (644, 644A with engine SN# 280001 and up), (646 SN# up to 223644), 690, 690A, (690B SN# up to 003872), 693B, (740 with cab and SN# up to 003872), 180, 202, 303, 329DH, 329GH, 329HC, 329HF. Replaces AT29926. (Part No: AT56592) $58.38

Voltage Regulator, 12 Volt - External voltage regulator. 12 volt. For models 3010, 3020, 4010, 4020. Replaces regulator 1118901. Flat mount. (Part No: AR40170) $49.38

Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) (AI) (Part No: AR78298) $46.59

Voltage Regulator, 24 Volt - For Diesels: 3010, 3020, 4010, 4020. Use with Delco Generators 1103021, 1103026. Replaces regulators 1119282 or 118957. Flat Mount. (Part No: TP-AR30155) $107.65

Wiring Harness Kit, Complete - Original style. For model 4020 Diesel Powershift from SN# 222919 to 250000. (Part No: R6685) $1296.96

Engine Bearings
Cam Bearing Set - For models 4000, 4010, 4020, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: CBK-D446) $35.13

Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437) $180.51

Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437-010) $183.98

Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437-020) $180.51

Main Bearing Set - MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437-030) $165.97

Main Bearing Set - MAIN Bearing SET For DIESEL 4010, 4020. STANDARD (Part No: MBK1441) $170.03

Main Bearing Set - MAIN Bearing SET For DIESEL 4010, 4020..010 (Part No: MBK1441-010) $170.03

Main Bearing Set - MAIN Bearing SET For DIESEL 4010, 4020..020 (Part No: MBK1441-020) $158.00

Main Bearing Set - Available in STD, .010, .020, .030 For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine. Specify size in Comments box when ordering. (Part No: R-RE27352S6) $108.09

Main Bearing Set - Available in STD, .020 For 4020 (To S#200999) with 341 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-838P) $117.75

Main Bearing Set - Available in STD, .010, .020, .030 For 4000, 4020 (From S#201000) with 362 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-1528P) $224.64

Main Bearing Set - Available in STD, .010, .020, .030 For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890, R40900. Specify size in Comments box when ordering. (Part No: R-AR49243S6) $155.25

Main Bearing Set - Available in STD, .010, .020, .030 For 4000, 4010, 4020, 4040, 4230 with 404 Diesel Engine (To EngS#214999) with Block #R40930& (From Eng S#215000) All. Specify size in Comments box when ordering. (Part No: R-AR74814S6) $159.15

Main Bearing Set - .010 - Main bearing kit, .010, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR49238 & 2-AR49245. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1/4 standard bore For 4010, 4020 (Part No: MBK1440-010) $123.92

Main Bearing Set - .020 - Main bearing kit, .020, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR49239 & 2-AR49246. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1/4 standard bore For 4010, 4020 (Part No: MBK1440-020) $140.66

Main Bearing Set - .STD - Main bearing kit, standard, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR49242 & 2-AR49243. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1/4 standard b For 4010, 4020 (Part No: MBK1440) $117.95

Main Bearing, .010 - For models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 andup 6.404T/A 6 cyl eng.), (4440 with 6.466T & SN# less than 233592 & 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above & 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Part No: AR74816) $20.74

Main Bearing, Std - Single bearing. For models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Part No: AR74814) $22.81

Rod Bearing - SINGLE bearing for the following 4 & 6 cylinder Gas and Diesel engines: 201, 230, 254, 381, 404. Used on the following tractors: 3010, 4010, 4020, 4320, 4520, 4620, 7020. Specify size and quantity needed when ordering. Sizes available: STD, .010, .020 or .030. (Part No: TP-AR45723) $28.24

Rod Bearing Pair 030 - For models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: TP-AR46398) $24.20

Rod Bearing Pair, .020 - For models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: TP-AR46397) $26.18

Rod Bearing Pair, 010 - For models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: TP-AR46396) $25.86

Thrust Bearing Set, .010 - For models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 andup 6.404T/A 6 cyl eng.), (4440 with 6.466T & SN# less than 233592 & 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above & 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Part No: AR77750) $47.08

Thrust Bearing Set, .010 Flange - Fits only the following diesel engines, 3.152, 3.164, 3.179, 4.039, 4.202, 4.219, 4.239, 6095D, 6.329, 6.359, 6.414. Used in Models: 1020, 1030, 1040, 1052, 1072, 1075, 1140, 1155, 1350, 1420, 1520, 1530, 1550, 1630, 1750, 1850, 2020, 2030, 2040, 2130, 2140, 2150, 2155, 2240, 2250, 2270, 2280, 2320, 2330, 2350, 2355, 2420, 2440, 2450, 2510, 2520, 2530, 2535, 2550, 2555, 2630, 2640, 2650, 2730, 2735, 2750, 4020, 4030, 6700, 6800, 6900. (Part No: AT21132) $26.77

Thrust Bearing Set, Standard - For models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Part No: AR77748) $42.07

Engine Gaskets
Crankshaft Seal, Front - For models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Part No: AR49025) $17.99

Crankshaft Seal, Rear - For models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Part No: RE22764) $36.84

Front Crank Seal - For models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-AR49025) $23.07

Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine (Part No: R-RE38859) $158.63

Full Gasket Set - With Rear Main Seal & Timing Cover Seal. For models 4010, 4020 with 404 Diesel Engine (To Eng S#214999). (Part No: R-AR53626) $146.29

Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Part No: R-AR53631) $168.75

Gasket Set - Overhaul GASKET SET. For models 4010, 4020. Both using 301 cu in. GAS engine. (Part No: FS3214W) $285.39

Gasket Set - For models 4000, 4020. (Part No: FS4221) $215.93

Head Gasket Set - For models 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine. (Part No: R-RE38852) $87.41

Head Gasket Set - For 4020 (To S#200999) with 341 Gas Engine (Part No: HS3214VC) $114.93

Head Gasket Set - For 4000, 4020 (From S#201000) with 362 Gas Engine (Part No: HS3846) $98.54

Head Gasket Set - For models 4010, 4020 with 404 Diesel Engine (To Eng S#214999). (Part No: R-AR53625) $75.21

Head Gasket Set - For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Part No: R-AR53630) $66.15

Main Seal Front - For models 1010, 1010 GAS, 145G SN# 30001>, 2010, 2010 GAS, 217G SN# 40001>, 2510, 2520, 3020, 340D, 4000, 4010, 4020, 4230, 4320, 440C, 440D, 448D, 4430, 4520, 4620, 500C, 5010, 5020, 510, 55 SN# 59282>, 7020, 95 SN# 51615>, 440, 440A, 440B, 500, 500 SN# <123113, 500A, 500B, 600, 700A, 760, 760A. Replaces (R35798) USED WITH 1000 RPM PTO. (Part No: AT344T) $9.98

Oil Pan Gasket - Oil pan gasket. 1 set used in 301 CID 6 cylinder gas engine (not for block #'s R40940, R49550); 1 used in 340 CID 6 cylinder gas engine (block #'s R33170, R43330, R40860, R40870 only, to SN# 200999); 1 used in 381 CID 6 cylinder diesel engine; 1 used in 404 CID & 466 CID 6 cylinder diesel engines (turbocharged & naturally aspirated).For models 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-R71918) $19.90

Rear Crank Seal - For models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-RE17352) $43.08

Rear Main Seal - For 2840, 3120, 3130, 3530, 4020, 4030, 4400, 4420, 4425 with 329 Diesel Engine (Part No: R-RE24959) $30.00

Rear Main Seal - For model 4020 (To S#200999) with 341 Gas Engine. (Part No: SS46829) $37.13

Rear Main Seal - For models 4000, 4020 (From S#201000) with 362 Gas Engine. (Part No: SS46829) $37.13

Rear Main Seal - For 4000, 4020 before SN# 200999, both with 340 CID Gas. Replaces RE17352, AR63095, SS46821. (Part No: R-RE22764) $36.79

Seal - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Must order in quantities of 2, price is for 1. (Part No: TP-AR26480) $13.26

Upper Gasket - UPPER GASKET For 4010, 4020 (Part No: HS3214VW) $82.92

Upper Gasket Set - Includes head gasket. For 4000, 4020 (Part No: HS4221) $102.40

Engine Rebuild Kits
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 4020 gas, 6 cyl. 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. TISCO supplies 4-1/4 For 4020 (Part No: BIFD1434) $755.74

Basic In-Frame Overhaul Kit - Made by TISCO. Kit is for a 6 cylinder diesel, between serial numbers 215000-335845 and having a 5 ring piston. For 4000, 4020. (Part No: BIFD1437) $1381.70

Basic In-Frame Overhaul Kit - Made by TISCO. BASIC In-Frame Overhaul KIT. For models 4010, 4020. (Part No: BIFD1441) $978.04

Basic In-Frame Overhaul Kit - Made by TISCO. For models 4000, 4020. (Part No: BIFD4043) $1259.84

Basic In-Frame Overhaul Kit - Made by TISCO. Keystone Top Compression Ring For 4010, 4020 (Part No: BIFD4441-3) $997.11

Basic In-Frame Overhaul Kit - Made by TISCO. BASIC In-Frame Overhaul KIT For 4010, 4020 (Part No: BIFD4441-5) $911.51

Basic In-Frame Overhaul Kit - Made by TISCO. Keystone Top Compression Ring For 4010, 4020 (Part No: BIFD4472) $1285.97

Basic Overhaul Kit - Made by TISCO. Basic engine kit, less bearings. For 4020 gas, 6 cyl. 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaf For 4020 (Part No: BEKD1434-LCB) $828.28

Basic Overhaul Kit - Made by TISCO. Made by TISCO. Kit is for a 6 cylinder diesel, between serial numbers 215000-335845 and having a 5 ring piston. For 4000, 4020 (Part No: BEKD1437-LCB) $1069.00

Basic Overhaul Kit - Made by TISCO. BASIC Overhaul Kit For 4010, 4020 (Part No: BEKD1441-LCB) $1193.65

Basic Overhaul Kit - Made by TISCO. BASIC Overhaul Kit For 4000, 4020 (Part No: BEKD4043-LCB) $1201.04

Basic Overhaul Kit - Made by TISCO. Tru Power Engine Kit. 6-Cylinder Diesel, 381 CID. 4-1/8" Standard Bore, 4-1/4" Overbore Supplied. 5-Ring Piston. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 4010 Series, 4020 Series. (Part No: BEKD4441-5-LCB) $1057.33

Basic Overhaul Kit - Made by TISCO. Keystone Top Compression Ring For 4010, 4020 (Part No: BEKD4441A3-LCB) $1055.96

Basic Overhaul Kit - For 4010, 4020. Tru Power Engine Kit. 6-Cylinder Diesel, 381 CID. 4-1/8" Standard Bore, 4-1/4" Overbore Supplied. 3-Ring Piston, Keystone Top Compression Ring. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 4010 Series, 4020 Series. (Part No: BEKD4472-LCB) $1252.80

Engine Major Overhaul Kit - Made by TISCO. For 4000, 4020 SN<200999, 600 Wheel Loader SN<214999, all with 340 CID, Gas, 6 cylinder, 4.25" bore, 4 ring pistons. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Connecting Rod Bearing Size of Standard, .010, .020, or.030. (Part No: OK340) $1317.24

Engine Major Overhaul Kit - For models 499, 699, 3120, 4020, 4030, 4420, 570A, 540A, 544A, all with SN<277548, 6.329 Diesel, 300 Series, 6 cylinder, Block #s R53250, R55035, R55351, R72970, R79280, T32346, 4.02" bore, 1.185" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Thrust Bearing Size of Standard, .010, .020 or.030, Connecting Rod Bearing Size of Standard, .010, .020, or.030. (Part No: OK6593) $1388.56

Engine Major Overhaul Kit - For 4010, 4020, 600 all with SN<214999, 6.404D Diesel, 400 Series, 6 Cylinder, Block #s R26070, R33180, R34340, R40890, R40900, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Thrust Bearing Size of Standard, .010, .020 or.030, Connecting Rod Bearing Size of Standard, .010, .020, or.030. (Part No: RG17901) $1495.25

Engine Major Overhaul Kit - Made by TISCO. For 4010, 4020, 600, all with SN<214999, 6.404D Diesel 400 Series, 6 Cylinder, Block #s R40930, R26060, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Thrust Bearing Size of Standard, .010, .020 or.030, Thrust Washer Standard or.007, Connecting Rod Bearing Size of Standard, .010, .020, or.030. (Part No: RG17902) $1472.86

Engine Major Overhaul Kit - Made by TISCO. For 4000, 4020, JD600, all with SN<214999, Power Unit, 6.404D Diesel, 400 Series, 6 cylinder, Block #s R26070, R33180, R34340, R40890, R40900, Early Power Booster, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Thrust Bearing Size of Standard, .010, .020 or.030, Connecting Rod Bearing Size of Standard, .010, .020, or.030. (Part No: OK6163) $1405.05

Engine Major Overhaul Kit - Made by TISCO. For 4000, 4020, 6600, 7700, 600, all with SN# 215000-335845, 6.404D Diesel, 400 Series, 6 cylinder, Block #R40610, R49620, R45950, R47170, R48440, 4.25 bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or.030, Thrust Bearing Size of Standard, .010, .020 or.030, Thrust Washer Standard or.007, Connecting Rod Bearing Size of Standard, .010, .020, or.030. (Part No: RG17903) $1458.84

In-Frame Overhaul Kit - 4.020 Bore with 1 3/16 Piston Pin For 3120, 4020, 4030, 4420 with 329 Diesel Engine (To S#277548). Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-329M-IFK) $905.38

In-Frame Overhaul Kit - 4 1/4 Bore. For model 4020 (To S#200999) with 341 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3444-IFK) $893.75

In-Frame Overhaul Kit - 4 1/4 Bore with Original Block For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890, R40900. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-404E-IFK) $1025.00

In-Frame Overhaul Kit - 4 1/4 Bore with Power Booster Pistons with Original Block For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890, R40900. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-404EPB-IFK) $1170.95

In-Frame Overhaul Kit - 4 1/4 Bore with Replacement Block. For models 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #R40930. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-404ERB-IFK) $1164.06

In-Frame Overhaul Kit - 4 1/4 Bore. For models 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845). Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-404M-IFK) $1051.56

In-Frame Overhaul Kit - 4 1/4 Bore with Power Booster Pistons For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845). Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-404MPB-IFK) $1059.39

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 4020 gas, 6 cyl. 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, cranks For 4020. KIT ALSO AVAILABLE WITH BEARINGS AT STD, .010 AND .020. CALL FOR PRICE. (Part No: EOK1434-LCB) $1001.45

Overhaul Kit - Made by TISCO. Standard Bearings-Engine Kit. 6-Cylinder Diesel, 404 CID. 4-1/4" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring. Engine Overhaul Kit. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 4020 Series. ***KIT IS ALSO AVAILABLE WITH .010 AND .020 BEARINGS. IF OTHER THAN STD NOTE IN COMMENT SECTION SIZE DESIRED.*** (Part No: EOK1441A) $1541.66

Overhaul Kit - Made by TISCO. Keystone Top Compression Ring For 4020 (Part No: EOK4441A3-LCB) $1194.65

Overhaul Kit - Tru Power Engine Kit. 6-Cylinder Diesel, 404 CID. 4-1/4" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring. Engine Overhaul Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 4020 Series. (Part No: EOK1441A-LCB) $1466.14

Overhaul Kit - 4.020 Bore with 1 3/16 Piston Pin For 3120, 4020, 4030, 4420 with 329 Diesel Engine (To S#277548). Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-329M-OHK) $980.44

Overhaul Kit - 4 1/4 Bore. For model 4020 (To S#200999) with 341 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: R3444-OHK) $968.75

Overhaul Kit - 4 1/4 Bore with Original Block. For models 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890, R40900. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-404E-OHK) $1134.38

Overhaul Kit - 4 1/4 Bore with Replacement Block. For models 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #R40930. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-404ERB-OHK) $1257.50

Overhaul Kit - 4 1/4 Bore. For models 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845). Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-404M-OHK) $1191.94

Engine Parts
Connecting Rod, Reconditioned - For Models: 3010, 3020, 4010, 4020 all gas with casting # R44257. (Part No: R1203421) $80.87

Connecting Rod, Reconditioned - For Models: 3010, 3020, 4010, 4020 all with gas engine and casting # R26046 or R44257. (Part No: R1202092) $93.36

Crankshaft Dampener Pulley - For models 4010, 4020 both with diesel engines. (Part No: AR58172) $330.75

Crankshaft Dampener Pulley - For models 4000, 4020 all SN# above 201000 with A/C. Crankshaft Dampener Pulley. (Part No: AR58176) $223.92

Crankshaft, with Timing Gear - Marked with casting number R63451, with oil pump gear, with front timing gear, timing gear is installed. For models (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Call for shipping charges - Weight 149 lbs. (Part No: RE53422) $1880.01

Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For model 4020. (Part No: VOKD404A) $363.34

Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit. For models 4000, 4020, 4040, 4230, 4520. (Part No: VOKD404B) $373.99

Float Valve - Viton needle float valve. ForModels: 3010, 3020, 4010, 4020, using Marvel Schebler. Also substitute for AR10105R. (Part No: AR10114V) $11.18

Flywheel - With Ring Gear - 12 Square Pin Hole Style For 3010, 3020, 4000, 4010, 4020Diesel with Syncro Transmission (Part No: R2323) $503.47

Flywheel with Ring Gear - For models JD500, JD500A, JD500B, JD600, 3010, 3020, 4010, 4020, 500C, ALL WITH DIESEL / SYNCRO TRANS., FOR SQUARE PIN HOLE STYLE FLYWHEELS. Flywheel with #R28811 Ring Gear. (Part No: AR40565) $490.74

Ring Gear - For models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570. Starter Flywheel Ring Gear for DIESELS. (t) (Part No: TP-R28811) $68.13

Thrust Washer - For models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 up to SN# 335845 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6cyl eng.), (4055 SN# 500000 and up 6.076H, 6.076T or 6.076A 6cyl engines), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 6.466T with SN# 253373 and up & 6.466A SN# 317859 and up 6cyl eng.), (4255 SN# 500000 and up 6.076T, 6.076A, 6.076H 6cyl eng.), (4320 6.404T/A 6cyl eng.), (4430 SN# 335845 and up 6.404T/A 6cyl eng.), (4440 6.466T SN# 253372 and less & 6.466A SN# 233592 and less 6 cyl eng.), (4450 6.466T with SN# 253373 and up & 6.466A SN# 317859 and up 6cyl eng.) (Part No: AR77747) $28.86

Valve Guide, Intake & Exhaust - Sold in multiples of 4, priced individually. 8 used in 254 CID 4 cylinder diesel engine (block #'s R26160, R40910, R46350, R46430 only), 270 CID 4 cylinder diesel engine (block #'s R32020, R40850 only, to SN# 280000); 12 used in 381 CID 6 cylinder diesel engine; 12 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block #'s R33180, R34340, R40890, R40900, R40930 only). For models 3010, 3020, 4010, 4020. (Part No: R28654) $7.54

Valve Service Kit - Contains:12-Valve Springs 12-Valve Guides & 24-Valve Stem Locks For 4010, 4020. For 301, 340 6 cyl Gas. (Part No: VSKD301) $107.72

Valve Service Kit - Cylinder HEAD Service KIT For 4010, 4020. Contains: springs, guides, locks, (no valves). ENGINE CID: 381D, 404D 6 Cyl Diesel. (Part No: VSKD381) $140.28

Valve, Exhaust - Sold in multiples of 2, priced individually. 4 used in 201 CID 4 cylinder gas engine (block # R26150) & 227 CID 4 cylinder gas engine (to SN# 122999); 6 used in 301 CID 6 cylinder gas engine (not for block #'s R40940, R49550); 6 used in 340 CID 6 cylinder gas engine (block #'s R33170, R43330, R40860, R40870, to SN# 200999). For models 3010, 3020, 4010, 4020. (Part No: R42420) $11.47

Valve, Exhaust - For models 3020, 4000, 4020, 4040, 4230, 4320, 4520, 4620, 7020. (Part No: TP-R43679) $27.33

Valve, Exhaust - Sold in multiples of 2, priced individually. 4 used in 270 CID 4 cylinder diesel engine (block #'s R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block #'s R33180, R34340, R40890, R40900, R40930 only). For models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. (Part No: R44175) $17.43

Valve, Intake - Sold in multiples of 2, priced individually. 4 used in 201 CID 4 cylinder gas engine (block # R26150) & 224 CID 4 cylinder gas engine (to SN# 122999); 6 used in 301 CID 6 cylinder gas engine (not for block #'s R40940, R49550); 6 used in 340 CID 6 cylinder gas engine (block #'s R33170, R43330, R40860, R40870 only, to SN# 200999). For models 3010, 3020, 4010, 4020. (Part No: R26109) $9.73

Valve, Intake - For models 3020, 4000, 4020, 4040, 4230, 4520. (Part No: TP-R43883) $26.76

Valve, Intake - Sold in multiples of 2, priced individually. 4 used in 270 CID 4 cylinder diesel engine (block #'s R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block #'s R33180, R34340, R40890, R40900, R40930 only). For models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. (Part No: R44174) $16.11

ValveService Kit - Cylinder HEAD Service KIT For models 2840, 2940, 2950, 2955, 4000, 4020, 4030, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. Contains: springs, guides, locks, (no valves). (Part No: VSKD329) $107.51

Engine Pistons and Sleeves
Piston Kit - Sleeve & piston kit, complete, one used per engine. Use with block numbers R33170, R34330, R40860 & R40870 only. For 4020 gas, 6 cyl. 340 CID, to SN# 200999. Sleeves & 4 ring pistons & rings, pins & retainers, for 4-1/4 bore. For 4020 (Part No: PK434) $715.24

Piston Kit - PISTON KIT For 4000, 4010, 4020 (Part No: PK437) $871.20

Piston Kit - PISTON KIT For 4010, 4020 (Part No: PK441) $945.26

Piston Kit - Keystone Top Compression Ring. For models 4010, 4020. (Part No: PK471) $989.41

Piston Kit - Keystone Top Compression Ring. For models 4010, 4020. (Part No: PK6409) $999.30

Piston Kit - PISTON KIT For 4000, 4020 (Part No: PKD404) $961.79

Piston Liner Kit - For 1 cylinder. Kit contains piston, sleeve, o-rings, piston rings, piston pin and snap rings. For models (1420, 1520, 1530, 350B SN# 179601 and below with 3.164D eng.), (2030, 2270, 2320, 2420, 401, 401A, 440, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (3120, 4020, 4030, 4420, 499, 540A, 570A, 699 SN# 277548 and below with 6.329 eng). (Part No: AR71593) $147.52

Piston Pin Bushing - 6 used per engine. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1/4 standard bore 4 ring piston. For models 3010, 3020, 4010, 4020. Must be ordered in multiples of 2, priced individually. (Part No: R30929) $19.74

Piston Pin Bushing - Piston pin bushing, 6 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, (500B, 500C, 510 SN# 280000 and up), (600 SN# 335845 and below), (6600 SN# 215000 and up), (7700 SN# 215000 and up), (JD500, JD500A, JD500B SN# 280000 and below). Sold in multiples of 2, priced individually. (Part No: R30939) $13.21

Piston Pin Bushing - For models (1020, 1030, 300, 300A, 350A, 350B, 380, 820 with 3.152 eng.), (1420, 1520, 1530, 302, 302A, 350B SN# 179601 and below with 3.164D eng.), (2020, 2510, 400, 440, 480 with 4.202 eng.), (2030, 2270, 2320, 2420, 2520, 401, 401A, 440, 440A, 440B, 450A, 450B, 480A, 499 SN# 275483 and up with 4.219 eng.), (2355NCS, 2355NTSS with 3.179T eng.), (300B, 301A, 830 SN# 154766 and up with 3.152 eng.), (3120, 4020, 4030, 4420, 499, 540A, 544A, 570A, 699 SN# 277548 and below with 6.329 eng.), (3420, 544 SN# 158976 and up with 6.303 eng.), (450 SN# 158257 and below with 4.202 eng), 5400N, 5500. (Part No: T23471) $8.38

Piston Sleeve - For models (500, 500A, 500B, 3010, 3020 up to SN# 180000 with 4.270 4 cylinder and early power booster engine), (600, 4000, 4010, 4020 SN# up to 214999 with 6.404D engine). (Part No: R32050) $60.91

Sleeve & Piston Kit - 4 1/4 Bore. For model 4020 (To S#200999) with 341 Gas Engine (Part No: R3444) $643.50

Sleeve Assembly (6 Required) - 4.020 Bore with 1 3/16 Piston Pin For 3120, 4020, 4030, 4420 with 329 Diesel Engine (SN # 160310 to 179601). (Part No: R-AR71593) $147.52

Sleeve Assembly (6 Required) - 4 1/4 Bore with Original Block For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890 (Part No: R-RE23173) $151.88

Sleeve Assembly (6 Required) - 4 1/4 Bore with Power Booster Pistons with Original Block. For models 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #sR26070, R33180, R34340, R40890. (Part No: R-CK270-EPB) $166.05

Sleeve Assembly (6 Required) - 4 1/4 Bore with Replacement Block For 4010, 4020 with 404 Diesel Engine (To Eng S#214999) with Block #R40930 (Part No: R-RE23170) $155.25

Sleeve Assembly (6 Required) - 4 1/4 Bore For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) (Part No: R-RE23165) $155.25

Sleeve Assembly (6 Required) - 4 1/4 Bore For 4000, 4020 with 404 Diesel Engine (Eng S#215000 to 335845) with Power Booster Pistons & All models with 6.404 diesel Engine (From Eng SN# 335845 and up) (Part No: R-RE23160) $172.13

Engine Rings
Piston Ring Set - Ring set for 4 ring piston, 1 used per engine. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1/4 standard bore 4 ring piston. For 4020 (Part No: PRS434) $64.22

Exhaust System
Chrome Curved Exhaust Stack 24 Inch - Double Walled, 24" Tall, 2 15/16" Flared I.D., 5" O.D.. For models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4264) $138.92

Chrome Curved Exhaust Stack 48 Inch - Double Walled, 48" Tall, 2 15/16", Flared IDl, 5" O.D.. For models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4265) $208.37

Chrome Stack, Curved - 36" double wall, 2-15/16" inlet I.D., 5" O.D.. For models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R5114) $208.37

Chrome Stack, Straight - 36", double wall, 2-15/16" flared inlet I.D., 5" O.D.. For models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4887) $188.53

Chrome Stack, Straight - 48", double wall, 2-15/16" inlet I.D., 5" O.D.. For models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4888) $198.45

Chrome Straight Exhaust Pipe - Double walled, 24" Tall - 2 15/16" Flared I.D. - 5" O.D.. For 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4263) $128.99

Intake Manifold - For 4000, 4010, 4020, 4230 all gas engine. Intake Manifold with gasket. (Part No: AR28062) $208.49

Manifold - For 4000, 4010, 4020, 4040, 4050, 4230, 4240, ALL with Diesel Engine. Exhaust Manifold replaces BMD# B-R26362. Gasket set is available for an additional charge. Please enter in comment section if you want to add to your order. (Part No: R26362) $213.73

Manifold, Exhaust - For models 4000, 4010, 4020, 4230 all with gas engine. Exhaust Manifold with gaskets. (Part No: AR28061) $204.77

Muffler - Vertical muffler~ round body. 2-15/16 inlet inside diameter~ 2-5/8 exhaust outside diameter~ 26 body length~6 body diameter. For tractor models: 4010 gas, 4010 diesel to engine serial number 7026, 4020 gas to tractor serial number 200999. For 4010, 4020 (Part No: TP-AR26640) $61.71

Muffler - Vertical muffler~ round body. Flared inlet inside diameter~2-5/8 exhaust outside diameter~ 26 body length~ 6 body diameter. For tractor models: 4010 diesel engine serial number 7027 and up, 4020 diesel to tractor serial number 200999. For 4010, 4020 (Part No: TP-AR30190) $63.08

Muffler - Vertical Exhaust Inlet I.D. - 2 15/16 Outlet O.D. - 2 5/8 Overall Length - 26 For 3010, 3020, 4000, 4010, 4020Gas and LP Gas3010 (To S#6643), 4010 (To S#7026)Diesel. OEM# AR26786, Use R1756 Clamp, Use R1803 Rain Cap (Part No: R1081) $47.02

Muffler - Vertical Exhaust Inlet I.D. - Flared Outlet O.D. - 2 1/4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4230 Diesel. OEM# AR86595, Use R2051 Clamp, Use R1801 Rain Cap (Part No: R1085) $56.32

Muffler, Vertical - Oval body. Inlet 2-15/16" I.D, outlet 2-1/4" O.D, 27" overall length. For models 3020 gas SN# 123000 & up, 4000, 4020 gas SN# 201000 & up, 4230. (Part No: TP-AR41172) $73.63

Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top: 7-1/4~ side height: 3~ cone inside diameter at top: 3-1/2~ overall height: 4-1/8. For tractors: 1010 dsl, 2010, 2020 dsl, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Part No: R28794) $10.64

Air Cleaner Pipe Grommet - For models (820, 830 3 cylinder), 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 6150, (4000, 4020 diesel), 4030, 4040, (4050 up to SN# 5510), 4230, 4240. Replaces AR56275, R28799, R50082, R57119. (Part No: AR56061) $20.20

Air Pre-Cleaner Bowl - Clear plastic pre-cleaner bowl for air intake system. Dimension of bowl outside diameter at top: 10-1/2~ side height: 3~ cone inside diameter at top: 5-9/16~ overall height: 4. For diesel tractors: 4000, 4010, 4020, 5010, 5020 and 6030. For 4000, 4010, 4020, 5010, 5020, 6030 (Part No: TP-R28795) $28.24

Carburetor Float - For 3010, 3020, 4000, 4010, 4020. Carburetor Float for Zenith. (Part No: AH10620) $25.00

Carburetor Gasket Set - Used on carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For 3010, 3020, 4010, 4020. (Part No: CGK41) $4.36

Carburetor Kit, Basic - Kit for Zenith 12510, 13429, 12879, 13320, 13450, 13430 carbs on 3010, 3020, 4020. (Part No: Z106) $28.00

Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For tractor models: 4010, 4020. For 4010, 4020 (Part No: BK371V) $32.93

Carburetor, Rebuilt - Fits 3010, 3020, 4010, 4020 - replacement for OEM USX20, USX21, USX30, USX31, USX35, USX36, USX48. Add $100.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1532-CARB) $290.10

Carburetor, Rebuilt - Fits 3010, 3020, 4010, 4020 - replacement for OEM 12510, 12879, 13320, 13429, 13430. Add $200.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1534-CARB) $260.10

Fuel Filter - Fuel filter element, cartridge type, for diesel tractors with dual filters. Models: 3010, 3020, 4000, 4010, 4020, 4520, 5020. For 3010, 3020, 4000, 4010, 4020, 4520, 5020 (Part No: TP-AR44077) $14.60

Fuel Filter - Fuel filter element, spin-on type, for diesel tractors with dual filters. Models: 3020, 4020, 5010, 5020. (Part No: TP-AR45097) $14.98

Fuel Injector - For models JD 3010, 3020, 4010, 4020 model tractors with injector #20494. replaces AR39811 and AR46846. (Part No: AR50781) $34.15

Fuel Injector - Nozzle, Injector. Pencil-type injector For models 840, 940, 1020, 1030, 1040, 1129, 1139, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2840, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3350, 3640, 4020. Replaces: AT25502, AT30299, AR49877, AR56290, AR73673, AR88239, AT18064, SE500822, SE500823, ROOSA # 22202. (Part No: AR89564) $34.15

Fuel Pump - Fuel transfer pump, similar to original equipment manufacturer, cannot be repaired. Diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Gas tra For 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Part No: TP-RE42211A) $59.08

Fuel Pump - Replacement fuel transfer pump, can be repaired. For diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. Can be serviced with repair kit TP-RE42. (Part No: TP-RE42211B) $41.15

Fuel Sending Unit - Fuel Tank Sending Unit for models 3020, 4000, 4020, 4320. (Part No: AR46268) $51.96

Fuel Tank Cap - For models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Part No: AT20911) $10.66

Fuel Transfer Pump Repair Kit - Repair kit, for fuel transfer pump RE42211, RE42211B. Used on diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. Gas tractors: 1520, 2030 For 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Part No: RE42211RK) $19.50

Grommet, Fuel Filler, Black - For models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7/8 inch outside diameter, 2 1/4 inch inside diamter, and 3 1/2 inch diamter on underside lip. (Part No: A5157R) $19.00

Grommet, Fuel Filler, Red - For models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. (Part No: R39613R) $25.00

Pre-Cleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Part No: AF3583R) $24.75

Throttle Knob - Plastic. For models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020. (Part No: R26670) $7.50

Gauges
Tachometer Cable - 33" long. For models 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AR26721) $27.95

Transmission Oil Temperature Gauge - For models (3020 SN# 123000 and up), (4020 SN# 201000 and up), 4320, 4520, 4620. (Part No: AR46979) $41.81

Hitch / Drawbar
Cat II Top Link - For models 2510, 2520, 3020, 4000, 4020 (To S#24999) 4030, 4230. (Part No: AR34208) $218.38

Drawbar - Straight 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: R3097) $224.63

Drawbar - 2 Offset with Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: R3098) $185.90

Drawbar - 2 Offset without Hammer Strap Holes 1.375 x 2.50 x 45 1.015 Holes at 1.375, 2.625, 4.687, 7.345, 9.325, & 12.590 For 4000, 4020, 4030, 4040, 4230, 4320, 4430 (Part No: R3099) $216.88

Drawbar Pin, Front - For models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Part No: AR27599) $25.37

Drawbar, Offset - 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 & 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Part No: R81576) $186.79

Lift Link Knuckle - For model s:3010, 3020, 4010, 4020 (To S#200999). (Part No: R3884) $52.67

Lift Link Rod - Rod is 25 5/8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Part No: R26611) $86.96

Lift Link Rod - For models 3010, 3020, 4010, (4020 up To S#200999). (Part No: R3115) $92.95

Lift Link, Adjustable - Works on either RH or LH side. For models 3010, 3020, 4010, (4020 SN# up to 200999). (Part No: AR44555) $249.17

Pull Arm Latch - For models 2510, 2520, 2840, 2940, 2950, 2955, 3020, (3030, 3130 SN# 166430 and up), 3040, 3055, 3120, 3140, 4000, 4020, 4040, (4040S, 4240S SN# less than 347554), 4230, 4240, 4250, 4255, 4430, 4455. Replaces AR30288, AR69317. (Part No: AR90082) $43.50

Rockshaft Cover Shield - For models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: R41663) $22.50

Sway Block - Left Hand For 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 (Part No: R3139) $54.00

Toplink Transfer Hook - S shaped hook. For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Part No: R53762) $14.22

Hydraulic System
Hydraulic Lever Guide - 2 piece. For models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320, 4520, 4620, 6030, 7020, 7520. Replaces R41760. (Part No: R41194) $50.63

Hydraulic Pump Seal & O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Part No: RE29107) $59.66

Hydraulic Pump Seal & O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Part No: RE29103) $60.38

Hydraulic Pump Stroke Control Valve - For models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Part No: RE10712) $38.92

Hydraulic Pump, New - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Part No: AR94660) $1176.00

Lower Lift Housing - For 3010, 3020, 4010, 4020 (To S#200999) (Part No: R3118) $108.44

Rockshaft - For models (2520 Row Crop), (3020 SN# 123000 and up), (4000, 4020 SN# 201000 and up Row crop and Standard), 4030, 4040, 4230, 4320, 4430. (Part No: R56175) $182.50

Selective Control Valve - Return & pressure valve. For models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2955, 3020, 3055, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630. Replaces AR78396. (Part No: AR86535) $29.58

Upper Lift Housing - For models 3010, 3020, 4010, 4020 (To S#200999). (Part No: R3885) $119.28

Lights
Dash Light - 12 Volt - For models 50 up to SN# 5016122, 60 to SN# 6017060, 70 Highcrop to SN# 706327, 520 to SN# 5208099, 1010, 2010, 2510, 3010, 3020 to SN# 122999, 4010, 4020 to SN# 200999, 5010, 5020, 6030, 8020. (Part No: AD2835R-12V) $24.99

Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Part No: T12443) $43.90

Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Part No: R27460) $12.43

Light Switch Knob - Use with AR48724 light switch. For models (2520, 2750 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4030, 4230, 4320, (4520 from SN# 142450 and up), 4620, 4630, (5020 with cab). Replaces AR54445. (Part No: R46092) $22.30

Light Switch Knob - For models 1010, 2010, 2510, (2520 up to SN# 22000), (4000, 4020 up to SN# 250000), 4010, (4520 up to SN# 142449), 5010, (5020, 6030 without cab). Replaces R27963. (Part No: AT65316) $9.31

Light Switch, 4 Position - 8 terminal, uses AT65316 knob. For models (3010 diesel), (3020 diesel SN# 67999-122999), (4010 diesel), (4020 diesel SN# 65000-90000), (5010 up to SN# 4499), 8020. (Part No: AR28402) $30.00

Light Switch, 4 position - 6 terminal, uses knob R46092. For models (2350 with sound guard cab), (2520 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4320, (4520 from SN# 142450 and up), (5020, 6030 with cab), 7020, 7520, (2355, 2550, 2555, 2750, 2755, 2855, 2840, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 all with sound guard cab), 4620, 4640. (Part No: AR48724) $26.25

Light Switch, 6 Volt - 4 position, 9 terminal, .50 inch thread dia. For models 2510, (2520 SN# up to 022000), (3020 SN# 068000 to 150000), (4000, 4020 SN# up to 250000 and up), (4520 early), (5010 SN# 008000 and up), 5020, (6030 without cab), (410B SN# up to 711602), 500C, 510, (510B SN# up to 711568), (610B, 710B SN# up to 711715), (600 SN# 91000 to 200999), 700A, 760A. Replaces R39551, AT21792. Knob not included. (Part No: AR41288) $38.48

Red Light with Brass Ring - For models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AA925R) $13.80

Work Tail Light - 2 wire connectors. For models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AR77326) $69.86

Miscellaneous
Frame Rail, LH - For models 4000, 4010, 4020. OEM# R2655. AN ADDITIONAL SHIPPING CHARGE OF $20.00 WILL BE ADDED DUE TO THE WEIGHT OF THIS PART. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R2655-AI) $364.60

Frame Rail, RH - For models 4000, 4010, 4020. OEM# R26555. (Part No: R3874) $274.42

Hammer Strap - Offset For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630 (Part No: R3102) $143.30

Hammer Strap - Straight. For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630. (Part No: R3103) $85.20

Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For models (3020 up to SN# 122999), (4020 up to SN# 200999, (2510 thru 1968). (Part No: 1212661) $306.02

Knee Extension - With Bushings - 18 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Part No: R3058) $290.72

Knee Extension - With Bushings - 24 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Part No: R3059) $371.79

Oil System
Oil Cooler - For models (6600, 7700 SN# 215000 and up with 6.404D 6 cyl engine), (600, 4000, 4020 up to SN# 335845 with 6.404D engine), (4010 SN# up to 214999), (4040, 4230 SN# 335845 and up), (6600, 7700 SN# 335845 and up with 6.404T/A). (Part No: AR55394) $161.88

Oil Filter - Oil filter element, cartridge type. For tractors: A, B, D, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030 gas, crankcase. (Part No: AR26350) $8.12

Oil Line, Rear LH, Inner - Dual selective control. For models (4020, 600 up to SN# 200999 powershift). (Part No: AR32313) $96.38

Oil Line, Rear LH, Inner - Dual selective control. For models (4020, 600 up to SN# 200999 syncro range). (Part No: AR32657) $67.00

Oil Line, Rear LH, Inner - For models (4020, 600 up to SN# 200999 syncro range). Replaces AR32653. (Part No: AR34770) $92.96

Oil Line, Rear LH, Outer - Dual selective control. For models (4020, 600 up to SN# 200999 powershift). (Part No: AR32314) $81.60

Oil Line, Rear LH, Outer - Dual selective control. For models (4020, 600 up to SN# 200999 syncro range). (Part No: AR32656) $71.61

Oil Line, Rear RH, Inner - For models (4020, 600 SN# up to 200999 powershift). Replaces AR32311. (Part No: AR34758) $103.36

Oil Line, Rear RH, Outer - For models (4020, 600 SN# up to 200999 powershift). Replaces AR32312. (Part No: AR34757) $94.57

Oil Line. Rear LH, Outer - For models (4020, 600 up to SN# 200999 syncro range). Replaces AR32652. (Part No: AR34769) $103.36

Oil Pressure Sending Unit - For models 1010, 1020, 1520, 1530, 2010 SN# 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. (Part No: AR27977) $16.46

Oil Pump Drive Gear - Late style without keyway. FOr Models: 3010, 3020, 500, 500A, 500B, 500C, 4000, 4020, 4010, 600, JD600, JD500, JD500A, JD500B, 6600, 7700. (Part No: R45134) $210.36

PTO / Driveline
PTO Shield - For 2510, 2520, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4455. PTO Shield. (Part No: R33348) $33.75

Seats
Seat Assembly - Black Vinyl on Steel. For models 1010, 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4555, 4620, 4630, 4755, 5010, 5020, 6030, 7020, 7520. Features flip up arms. (Part No: R1143) $357.05

Seat Assembly - Black Fabric on Steel. For models 1010, 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4555, 4620, 4630, 4755, 5010, 5020, 6030, 7020, 7520. Features flip up arms. (Part No: R1144) $446.31

Seat Assembly - Yellow Vinyl on Steel. For models 1010, 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4555, 4620, 4630, 4755, 5010, 5020, 6030, 7020, 7520. Features flip-up arms. (Part No: R1145) $357.05

Seat Back - Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0183) $125.85

Seat Back - Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0189) $125.85

Seat Back - Brown Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0192) $125.85

Seat Back - Black Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0195) $90.34

Seat Back - Black Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0976) $125.85

Seat Bottom - Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0182) $119.48

Seat Bottom - Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0188) $119.48

Seat Bottom - Brown Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0191) $119.48

Seat Bottom - Black Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0194) $90.34

Seat Bottom - Black Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0975) $119.48

Seat Cushion Set - Yellow Leatherette upholstery seat cushion set. Includes seat, lower and upper backrests. For models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4340, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 95, 105, 4400, 6600. (Part No: JD5678) $137.86

Seat Upper Back - Yellow Vinyl on Steel. For models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0184) $66.91

Seat Upper Back - Brown Vinyl on Steel. For models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0190) $66.91

Seat Upper Back - Brown Fabric on Steel. For models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0193) $66.91

Seat Upper Back - Black Fabric on Steel. For models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0196) $38.94

Seat Upper Back - Black Vinyl on Steel. For models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0977) $66.91

Sheet Metal / Body Parts
Battery Box, LH - For models 2520, (3020 SN# 123000 and up), (4000 Row crop SN# 201000 and up), (4020 Row crop SN# 201000 and up), 4320. All less cab and JD500A. (Part No: AR40674) $77.32

Battery Box, LH - For model 4020 SN# 065000-200999. (Part No: AR40210) $83.18

Battery Box, RH - For models 2520, (3020 SN# 123000 and up), (4000 Row crop SN# 201000 and up), (4020 Row crop SN# 201000 and up), 4320, 4520, 4620. All less cab and JD500A. (Part No: AR40673) $77.32

Battery Box, RH - For model 4020 SN# 065000-200999. (Part No: AR40209) $83.18

Battery Hold Down - For Models: (3010, 4010 standard), (3020, 4020 Row-Crop with Cab & Standard), 4000, (4320, 4520, 4620 Row-Crop with Cab). (Part No: AR26469) $38.25

Fender Bracket - For 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8460, 8630, 8640, 8650 (Part No: R70588) $197.75

Fender, Flat Top, LH With Hand Hole - For Row-Crop Models, Left-Hand Fender for: 530, 630, 730, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces AR48873. Rubber Hand Hole Grommets available as #R2468. Note in comments section of order form to include Hand Grommet(s). ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE **. (Part No: RE13879) $235.00

Fender, Flat Top, RH - Fender right hand, for row crop tractors less cab & sound guard body. Tractors: 530, 630 gp (SN# 6300000 & up), 730G&D GP (SN# 7300000 & up), 2010, 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320. For tractors with tire sizes 13.6 x 38, 15.5 x 38, 16.9 x 30, 18.4 x 30, 18.4 x 34. Tractors: 2350, 2550, 2750. Replaces AR20869, AR20870, AR48872, AR48873. *Use fender grip R20759. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE **. (Part No: RE13878) $235.00

Frame Rail, LH Side - For models 4000, 4010, 4020. Replaces R26556. ***AN ADDITIONAL SHIPPING CHARGE OF $20.00 WILL BE ADDED DUE TO THE WEIGHT OF THIS PART*** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R34114) $364.60

Frame Rail, RH Side - For models 4000, 4010, 4020. Replaces R26555. (Part No: R34113) $280.67

Platform - Does NOT have dimmer switch hole. For models 2520, (3020 row crop and high crop from SN# 123000 and above), (4000 row crop and high crop from SN# 201000 and above), (4010 row crop from SN# 001000 and above & Standard From SN# 020200 and above), (4020 row crop and high crop from SN# 201000 and above & syncro range from SN# 065000 to 090999), (4320 row crop). Replaces AR40672, AR48004. (Part No: AR48727) $263.25

Rear Side Shield, LH, Early - For models 4010, 4020 SN# before 200999. (Part No: AR26770) $65.10

Rear Side Shield, LH, Late - Left side. For models 4000, 4020 both after SN# 201000). Shield comes with Pins, Clips and Springs. (Part No: AR40774) $59.99

Rear Side Shield, RH, Late - Right Side For models 4000, 4020 both after SN# 201000). Shield comes with Pins, Clips and Springs. (Part No: AR40773) $59.99

Rear Side Shield, RH, early - For models 4010, 4020 SN# before 200999. (Part No: AR26769) $65.10

Rockshaft Cover, LH - With tool box. For models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: AR40817) $168.75

Rockshaft Cover, RH - For models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: AR41599) $114.75

Rockshaft Support - For models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: R41231) $47.25

Side Screen - Side grill panel, 17 x 19-3/4. For tractors: 4000, 4010, 4020. Two(2) used per tractor. Replaces AR26539. For 1010, 2010, 3010, 3020, 4010, 4020, 5010 (Part No: AR32720) $75.00

Side Shield, Front, LH - For models 4000, 4010, 4020. (Part No: AR32690) $101.25

Side Shield, Front, RH - For models 4000, 4010, 4020. (Part No: AR32689) $101.25

Step Pad - For models 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 50, 5010, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, 80, 8020, 820, 830, 8450, 8650, 8850, 920, A, B, G (Part No: F3195R) $29.87

Tractor Step - For models JD500A, JD600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. (Part No: R27883) $31.40

Steering
Axle Center Tube - For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. $100 will be added for shipping due to size/weight of part. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R0009) $999.19

Complete Wide Axle Assembly - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly. Includes all framing, tie rod and spindles. CALL FOR SHIPPING QUOTE. Truck delivery, 450 lbs. (Part No: AR44331) $1709.96

Complete Wide Axle Assembly, Heavy Duty - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly - HEAVY DUTY. Includes all framing, tie rod and spindles. CALL FOR SHIPPING QUOTE. Truck delivery, 465 lbs. (Part No: AR44331H) $1863.36

Front Axle Assembly, Wide, Heavy Duty - For 3010, 3020, 4000, 4020. Includes 6 bolt hubs with 6" bolt circle and 4.62" pilot diameter hole, bearings and seals are also included. Heavy Duty Front Axle with hubs and mounting parts. Width on wide axles are adjustable from 60" to 86". Additional $100 added to shipping due to the weight of this item 320 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 24450) $1394.94

Front Axle Assembly, Wide, Heavy Duty, without hubs - For JD 3010, 3020, 4000, 4010, 4020. Schwartz Complete Axles and mounting Parts WITHOUT HUBS. These Heavy Duty Models do not include hubs and bearings. Use original hubs and bearings from narrow front axle. The Heavy Duty Models are especially adaptable for use with flotation tires. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 300 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 22770) $1377.78

Front Axle Housing with Bushings - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Front Axle Housing with Bushings. Used on AR44331 and AR44331H wide front ends. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: AR50865) $1214.42

Hub, Front Wheel, 6 bolt - Fits: 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 & below), 3130 (SN# 186270 & above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 & above), 401B, 401C, 4020 (SN# 201000 & above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, 480B. Note: This hub uses a press in cap part# R50992 available only from John Deere (Part No: R49839) $65.83

Knee Assembly, Heavy Duty. - Knee Assembly, Heavy Duty. Includes spindle, Knee, inner bearing cone, and thrust washers. For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors (Part No: AR44333) $408.38

Knee, Heavy Duty - A= 3.250", B= 18.00", C= 12.750". For Used on heavy duty front axle AR44331H. Models: (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 all with heavy duty knee). (Part No: AR44333KN) $330.51

Long Knee Extension - Long Knee Extension. For Extra Wide Rows. Dimensions A-3.250 inch B-24.000 C-12.750 inch For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. (Part No: AR50963) $383.66

Pivot Bolster - Use R3064 Pin. For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Additional $75 shipping will be added to your order due to weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R3063) $611.90

Pivot Pin - Used front & rear, 4.375" long, 1.500" dia. For models 2510, 2520, 3010, 3020, 4000, 4020, 4230, 4320, 9900. (Part No: R27817) $36.39

Pivot Plate - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Pivot plate with caps & bolts. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: AR69836) $561.41

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Part No: R34348) $78.38

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Part No: R79152) $144.39

Pump Shaft - Pump Shaft. OEM part number is stamped in splined end of shaft, Used in 65CC (3.3 C.I.) pump, 6 cylinder engine. For JD 3140, 4000, 4020, 4040, 410, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 500C, 8430, 8440, 8450, 8630, 8640, 8650 (Part No: R79154) $102.88

Pump Shaft - Pump Shaft. OEm part number is stamped in splined end of shaft, Used in 66CC (4.3 C.I.) Pump, 6 Cylinder Engine. For JD 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 8430, 8440, 8630, 8640 tractors. (Part No: R79156) $104.18

Spindle - Spindle, LH/RH. Dimensions A-27.375 inch, B-1.50 inch, C-1.687 inch, D-1.312 inch. For 2510, 3020, 4000, 4010, 4020, All Hi-Crop, 2520 Hi-Crop SN# 21001-> (Part No: AR50981) $253.54

Spindle, Heavy Duty - Spindle, Heavy Duty. Dimensions A-15.125 inch B-1.750 inch C-1.795 inch D-1.312 inch For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. All with Heavy Duty Spindle. (Part No: AR44333SP) $230.38

Spindle, RH/LH - A= 15.125", B= 1.500", C= 1.687", D= 1.312". For models (2510, 3010, 3020, 4000, 4010, 4020, 4320 all row crop front axle), (2520 SN# 022001 and up row crop), 9900 cotton picker. (Part No: AR55180) $178.30

Splindle, RH/LH - Spindle, LH/RH. Dimensions A-12.750 inch B-1.50 inch C-1.687 inch D-1.312 inch. Fits 3010, 3020, 4000, 4010, 4020 All with Standard non-adj. front axle. (Part No: AR55179) $177.13

Steering Arm, Center - For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900. (Part No: R27808) $129.87

Steering Arm, LH - 1.50" dia., 6 spline. For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Part No: R47766) $55.80

Steering Arm, RH - 1.50" dia., 6 spline. For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Part No: R47765) $55.80

Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 & up, 4000, 4020 serial number 201000 & up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Part No: T22875) $53.33

Steering Wheel - 16" dia., 7/8" splined hub, smooth finish, like original. For models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 4520, 4620, 5010, 5020, 6030, 7030, 7520. (Part No: AR26625) $53.34

Steering Wheel Cap, Black Face - For Models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: R26673) $44.90

Steering Wheel Cap, White Face - For Models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: JDS338) $44.90

Tie Rod - Tie rod end, outer threaded, Left hand threads, 3-7/8 to center of post. For fixed front axles on tractors 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320. For 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: TP-AR27430) $32.24

Tie Rod Assembly - For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. Tie Rod Assembly. HAS 11.5 INCH LENGTH ON INNER TIE ROD TUBE. (Part No: AR44332) $114.45

Tie Rod Assembly - For models 4320, (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 all with 88" Wide Tread). Complete Tie Rod Assembly. HAS 15.5 INCH LENGTH ON INNER TIE ROD TUBE. (Part No: AR44334) $91.19

Tie Rod End - Tie rod end, outer, threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230. (Part No: TP-AR27351) $24.08

Tie Rod End - For models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. (Part No: TP-AR51584) $39.11

Tie Rod Inner Tube - 15.50 Long 1.00 diameter with 10 Holes For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 with 88 Tread Axle (Part No: R3830) $97.32

Tie Rod Outer Tube - 12.375 Long .875 diameter with Internal Threads For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: R3042) $36.30

Tie Rod Tube - Tie rod end, outer, drilled, 12.375 inches long, 2 holes, threaded on one end. For adjustable front axles on tractors: 2510, 2520, 3010, 3020, 4000*, 4010, 4020*, 4230 low profile, 4320*. Replaces AR 27350. *Also fits above models with power drive front axles. For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: R28021) $40.05

Wheels
Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: M88048) $16.92

Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: JD8913) $18.22

Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: TP-JD8929) $16.92

Bearing Cone - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: 25577) $21.66

Bearing Cup - Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Part No: TP-JD7266) $8.80

Bearing Cup, Rear Wheel - For models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430, 5010. (Part No: TP-JD7445) $9.60

Front Wheel Bearing Kit - Wheel bearing kit. For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. Kit Contains: 25521(Cup), 25577(Cone), M88010(Cup), M88048(Cone), AR26480(Seal), R26632(Seal Retainer), A1556R(Axle Cap Gskt). Repairs one wheel. (Part No: FW157S) $44.52

Front Wheel Nut & Bolt Set - For 1020, 1420, 1520, 1530, 1550, 1650, 1750, 180, 1850, 1950, 2020, 2030, 2150, 2155, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2840, 2855, 2955, 3010, 3020, 3055, 400, 4000, 4020, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 5244, 4320, 4430, 4440, 4450, 4455, M. Front Wheel Nut & Bolt Set of TEN 10. Bolts are 9/16 Inches x 1 1/2 inches. Zinc Plated Nuts. (Part No: WB916-bolt_nuts) $39.95

Wheel Bearing Kit - For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4320. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n 25577(Cone), 25521(Cup), M88048(Cone), M88010(Cup), 23342(Seal), R26632(Seal Retainer). (Part No: WBKJD6) $37.50

Wheel Hub - 6 Bolt For 1520 HD, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, 4430. This is a hub only. For wheel bearing kit order p/n WBKJD6. (Part No: R48763) $59.90

Wheel Hub, Front - 6 bolt. For models (1520 HD front end), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430. (Part No: TP-R48763) $65.64



Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL) $35.25

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET) $89.00

Cooling System
Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153) $56.70

Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black & silver, vinyl cut. (Part No: R4697) $9.30

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black & yellow, vinyl cut. (Part No: R4696) $9.30

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black & yellow, vinyl cut (Part No: R4695) $9.30

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: R5186) $15.50

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: R5187) $15.50

2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: R5188) $25.94

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: R5189) $15.50

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: R5184) $31.92

4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: R5185) $31.92

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Part No: JDL2Y) $14.60

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088) $9.06

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258) $39.25

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE) $106.29

Coil Bracket - Universal Coil Bracket (Part No: R1940) $6.61

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611) $40.19

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $35.99

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111) $39.21

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011) $32.82

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $35.99

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $36.89

Coil, Ultra High Performance (Black), Oil Filled - Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011) $35.25

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $39.68

Distributor Cap, Wico - For All models using Wico distributor, clip type cap. (Part No: AT14190) $42.21

Magneto Cap, 2 Cylinder - For models using WICO XH magneto ONLY. (Part No: 1006501) $61.65

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6) $14.25

Solenoid, 6 Volt - 3 terminal, Delco starters 1107466, 1107474. (Part No: DR1465) $19.98

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65) $3.64

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85) $3.64

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442) $14.48

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259) $17.22

Spark Plug Wire Set, Universal, 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $20.02

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. NOTE

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12) $14.40

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6) $14.40

Voltage Reducer with Bracket - 12 volt to 6 volt. (Part No: S.52671) $11.82

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR) $7.14

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR) $7.86

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR) $11.78

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. Its useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $6.71

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055) $24.95

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521) $35.67

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560) $63.87

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802) $9.80

Fuel System / Air Intake
Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72) $15.22

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4, outlet 1/4, O.D. 1-29/32, length 4-1/16. (Part No: 6511393) $6.92

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8, outlet 3/8, O.D. 1-29/32, length 3-7/8. (Part No: BF836) $6.28

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840) $6.22

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $29.99

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $65.00

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3/8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $27.62

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494) $8.38

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003) $9.97

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R) $1.50

Gaskets
Gasket Material, Cork Rubber - 3/32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332) $10.95

Gasket Material, Cork Rubber - 1/16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116) $13.75

Gasket Material, Exhaust Manifold - 1/16" thick x 12" wide x 28-1/2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228) $19.95

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844) $14.90

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898) $22.90

Gauges
Hour Meter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1/4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771) $43.69

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 x 6 ft. copper oil line. Includes 6 Ft 1/8 Line, 2 x 5/16 -24 UNF Nuts, 2x Compression sleeves, and a 1/8-27 NPTF Female to 5/16-24 UNF male adapter. (Part No: UNI523) $22.75

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/8" tube. Brass. (Part No: 919095) $14.35

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/4" tube. Brass. (Part No: IHS626) $14.35

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002) $15.95

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 male adapter, engine block or radiator threaded hole. (Part No: 1042944) $23.85

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50) $25.30

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT) $17.62

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A) $7.96

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X) $6.94

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4STUD THREAD, 2-1/2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 BALL SIZE, 1-3/8STUD THREAD, 2-5/8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_) $23.40

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $12.30

HITCH BALL 3500LB - Hitch ball. 2" ball size, 3/4" stud thread, 1-7/8" stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234) $12.64

HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1/8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $14.44

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $20.52

LINCH PIN - Package of 10 linch pins. Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $4.90

LINCH PIN - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $4.00

LINCH PIN - Package of 10 linch pins. 7/16" dia. pin x 1-3/4" useable length, 1-5/8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $3.90

LINCH PIN - LINCH PIN Package of 10 linch pins. 3/16" O.D. pin x 1-1/4" Long.***Enter 1 for package of 10** (Part No: DKP316) $3.90

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8" mounting pins and adapter bushings, 27-1/4" width, 3-1/2"x 3-1/2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101) $284.34

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1" thick x 2-1/2" width) . Prevents drawbar from rotating. (Part No: 49A29) $26.72

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2) $27.98

Universal Stabilizer Chain Kit - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH) $47.67

Hydraulic System
Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts) $00.00

Implements
AXLE BOLT - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317) $18.22

AXLE NUTS (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH) $1.58

BLADE BOLT KIT - For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 (for 1 1/2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607) $16.66

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH) $2.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $8.28

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $6.44

Caster Assembly - Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2" diameter, 8" overall length, 7-1/4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269) $172.49

Caster Assembly - Tail wheel & hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2" diameter, 8" overall length, 7-1/4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269) $172.49

Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting. 4 x 8 inch rim, 15 inch O.D. of wheel. Includes Wheel, Hub, Axle Bearing, and Bolt Assembly.OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $103.86

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP) $27.92

HUB with BRG CUPS - 4-bolt, 5" bolt circle & 3-5/8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311) $44.15

Hub Assembly - Hub with bushings (3/4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1/4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $34.53

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129) $40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100) $75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166) $95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162) $98.19

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163) $107.04

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH) $5.20

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $125.98

Tail Wheel Assembly - 4" x 8" tail wheel assembly with laminated tire. 3-5/8" pilot, 4 bolt holes, 5" bolt circle, 3-3/4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $42.90

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP) $21.27

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $48.63

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $41.70

Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $72.05

Safety Light Amber - 12 volt Amber Safety Light, 4 and a 1/4 dia., 3/8Dia by 5/8 mounting Stud.Does not include Flasher. (Part No: S.61357) $23.90

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E) $120.44

Work Light 12V With Switch - Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1/2" diameter sealed beam lamp, L4411. (Part No: L408-12V) $28.08

Work Light 12V With Switch - Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1/2" diameter sealed beam lamp, L4411. (Part No: L408-12V) $28.08

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792) $29.93

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771) $31.65

Miscellaneous
Cab Foam Kit - With Headliner 7-Piece - Black For models with 1300 Series Hiniker Cab (Part No: R1235) $317.90

Cab Foam Kit - With Headliner 10-Piece - Black For models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236) $330.43

Cab Foam Kit - 7-Piece - Black For models with Hinson Cab. (Part No: R3247) $317.90

CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD/VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof Extension Cables. (Part No: CC7M1C) $339.62

Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X) $402.16

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603) $70.84

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $103.07

Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD) $350.00

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $220.12

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $145.07

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218) $24.48

Oil System
Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001) $12.93

Oil Pump Shaft - Late style without keyway. For All Models SN# up to 214999 with 6.404D early power booster 6 cyl engine. (Part No: R64568) $106.70

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1/16) bearing diameter x 74.6mm 2.940 (2-15/16). 1333mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138) $164.92

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 round bore with 1/2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16) overall length (43-3/4) . Verify length before ordering. (Part No: AB4111WY) $183.74

Driveline Assembly with Yokes - AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-1/4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R) $181.20

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 - 6 spline Q.D. tractor yoke, 1-3/8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1/16) earing dia. x 74.6mm - 2.940 (2-15/16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33) $278.82

PTO Safety Clutch, 40 HP - 1-3/8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164) $210.57

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250) $24.00

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P) $44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP) $27.96

Dakota Prep & Shine, Twin Pack - Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK) $38.48

Dakota Prep, 1 Gallon - Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals/vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G) $83.37

Dakota Shine, 1 Gallon - Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G) $138.26

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $42.53

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $24.74

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $42.52

Paint, Classic Green, 1 Gallon - For 2 cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215GAL) $52.46

Paint, Classic Green, 1 Quart - For 2-cylinder JD, from TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215QT) $29.86

Paint, Classic Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** For 2 cylinder JD From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP215SP) $42.52

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL) $71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT) $29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP) $51.68

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $42.24

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $42.52

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700GAL) $42.24

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700QT) $18.69

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP) $42.61

Paint, Green, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210GAL) $50.00

Paint, Green, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210QT) $29.92

Paint, Green, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP210SP) $51.84

Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530GAL) $86.00

Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530QT) $34.05

Paint, Industrial Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP530SP) $51.68

Paint, JD Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190GAL) $42.53

Paint, JD Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190QT) $24.74

Paint, JD Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP190SP) $42.52

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $45.50

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $25.92

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $42.52

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $53.93

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $42.52

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL) $65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT) $27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT) $95.63

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Seats
Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1/2" center to center on mounting holes, 1/2" by 1/2" center square. (Part No: B1865) $37.24

Seat Belt - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $36.67

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT) $23.10

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V) $1294.75

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) $1405.98

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3/4" D). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $98.77

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP) $101.46

Seat, Universal - BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP) $93.40

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP) $93.40

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BK) $106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL) $109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL) $106.23

Seat, Universal INDUSTRIAL with SLIDES - Seat, universal, non-suspension style seat assembly with slide track for forward/rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1/4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND) $70.15

Tie-On Seat Cover - Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2602) $36.00

Tie-On Seat Cover - Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: R1014) $36.00

Tie-On Seat Cover - Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016) $36.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $172.58

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP) $97.65

Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD) $24.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $30.09

DZUS Fasteners Kit - Universal Set of 5 fasteners. 1/4 Turn Fasteners. For 13/32 inch holes, Head Diameter is 11/16, springs are 1 7/8 inch in length. Verify size before ordering. (Part No: DZUS2) $16.00

Fender Hand Grip - Used on many ag tractors, combines, implements and industrial tractor applications. (Part No: R20759) $9.86

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, and 1/2. (Part No: RPD112K) $138.96

SAFETY STEP KIT - Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011) $51.96

Toolbox - Universal style of 11 inches long, 4 inches wide and 4.5 inches tall. Must drill mounting holes to match your tractor. (Part No: ABC308) $37.50

Toolbox - Universal Toolbox 15 1/2" X 4 3/4" X 4 1/4". Comes Primed ready to prep and paint. (Part No: R2685) $29.40

Toolbox, Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5/8" wide and 4-1/2" deep. (Part No: TB100FM) $43.86

Steering
Steering Wheel Cap - 2 legged deer, correct cap for all covered steering wheels on JD models from 1968-2000. (Part No: AL155227) $36.75

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275) $10.00

Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276) $11.70

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279) $11.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278) $11.70

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323) $11.70

Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277) $11.70

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Part No: R3280) $11.70

Tools
*Combination Wrench Set - 22 pieces SAE/Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1/4 thru 7/8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069) $29.99

Adjustable Cylinder Hone Replacement Stones, Coarse - Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563) $17.48

Adjustable Cylinder Hone Replacement Stones, Fine - Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556) $17.48

Adjustable Cylinder Hone Replacement Stones, Medium - Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549) $17.48

Adjustable Engine Cylinder Hone - Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542) $38.37

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891) $19.95

Chain Binder - 1/4" chain binder, 2600 pound load limit. (Part No: LL104) $36.74

Chain Binder - 3/8" chain binder, 5400 pound load limt. Use with either 5/16" or 3/8" chain. (Part No: LL105) $41.70

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $78.11

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $78.11

Combination Wrench Set - 11 pieces. Sae sizes 1/4 to 7/8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061) $21.00

Compression Tester - Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579) $32.48

Cotter Pin Assortment - 150 Pieces. Contains sizes of 1/8x2, 5/32x2 1/2, 3/16 x 3, 1/4 x 2, 1/4 x 3, 5/16 x 2 1/2. All in a convenient re-sealable plastic case. (Part No: W5206) $12.48

Cotter Pin Assortment, Small - 560 piece assortment of 1/16" x 1", 3/32" x 1", 3/32" x 1-1/2", 1/8" x 1-1/4", 1/8" x 2", 5/32" x 2-1/2" all in convenient re-sealable plastic case. (Part No: W5205) $9.40

Diesel Compression Test Kit - Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy +/- 2 percent. (Part No: W89731) $59.95

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6) $36.11

GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121) $28.88

GREASE GUN - Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080) $26.74

GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142) $35.16

GREASE GUN CLAMP - Clamp holds all 2-1/4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102) $12.44

GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401) $109.95

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B) $270.05

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B) $376.87

GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115) $10.86

GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118) $9.90

Hair Pin Assortment - 150 pieces. Includes 6 different sizes from 1 3/16 Length to 2 15/16. All in a convenient re-sealable plastic case. (Part No: W5210) $8.32

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474) $249.90

Hobby Tool Kit - With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709) $23.74

Hose Clamps Assortment - 26 pieces. Includes sizes of: 5/8, 7/8, 1, 1 1/16, 1 1/4, 1 1/2 inch. All in a convenient re-sealable plastic case. (Part No: W5348) $8.06

MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420) $24.76

Main Seal Installer/Remover - Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019) $7.10

O-Ring Assortment - 407 pieces. Includes 32 sizes from 1/4 O.D to 2 1/4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202) $16.36

Piston Ring Compressor - Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573) $18.12

Piston Ring Groove Cleaner - Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1/16, 5/64, 3/32, 3/16 and 1/4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576) $18.26

Rotary Tool Kit - 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083) $19.00

Rubber Grommet Assortment - 125 pieces in 18 various sizes from 1/8 x 9/32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214) $9.38

Screwdriver Set - 30 pieces. Contains 7 screwdrivers 1/4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718) $23.08

Spring Assortment - 200 pieces. Includes compression type sizes from 9/32 x 1/2 to 7/32 x 1 1/2, extension type from 13/64 x 13/16 to 11/32 x 1 7/16. (Part No: W5200) $7.98

Step Drill Bit Set - 3 Pieces. Titanium Nitride Coated high speed steel. 1/4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003) $17.20

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Comes with hand storage rack (mountable). (Part No: W80274) $19.94

Torque Wrench - Micrometer 1/2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB) $34.40

Valve Spring Tool - Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567) $31.24

WIRE STRIPPER 4-WAY - 4-way wire stripper/crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223) $9.88

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $37.50

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002) $129.95

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $119.95

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001) $149.95

Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $129.95

Wire Terminal Assortment - 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213) $15.48

Woodruff Key Assortment - 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341) $11.26

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Front Tractor Tires - We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

Rear Rim Carriage Head Bolt and Nut - 2.5 length, 5/8 diameter FF Carriage Head Bolt with 1/2 inchnuts. PRICED EACH. **Minimum order is quantity of 6. (Part No: HB250) $3.25

Rear Tractor Tires - We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350) $15.48

TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG) $17.16

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599) $42.82

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R) $39.95

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Tube 24 Inch - For 7.5, 8.3, 9.5 x 24 inch tires. (Part No: WHS060) $37.60

Tire Tube 24 Inch - For 11.2, 12.4 x 24 inch tires. (Part No: WHS059) $51.30

Tire Tube 28 Inch - For 11.2, 12.4 x 28 Inch Tires. (Part No: WHS058) $56.55

Tire Tube 28 Inch - For 13.6, 14.9 x 28 Inch Tires. (Part No: WHS061) $79.45

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062) $56.95

Tire Tube 34 and 36 Inch - For 11.2 or 12.4 x 34 Inch Tires and for 11.2 or 12.4 x 36 Inch Tires. (Part No: WHS063) $59.90

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064) $65.25

Tire Valve Fluid Adapter - For ballast. (Part No: S.61167) $27.90

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3) $74.22

Show CategoriesShow all 4020 Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
John Deere Model 4020 Manuals
4020 - G&D I&T Aftermarket Shop Repair Manual 224 Pages (Part No: JD-203) $29.95

4020 G,LP,Dsl (SN# 0-200999) Service Manual 740 Pages (Part No: JD-S-SM2039) $119.95

4020 G,LP,Dsl (SN# 201000 & UP) Service Manual 378 Pages (Part No: JD-S-TM1006) $69.95

4020 G&D (SN# 0-200999) Parts Manual 464 Pages (Part No: JD-P-PC859) $76.95

4020 Dsl (SN# 201000 & UP) Parts Manual 532 Pages (Part No: JD-P-PC1116) $92.95

4020 G,LP,Dsl - Standard & RC (SN# 0 - 90999) Operators Manual 88 Pages (Part No: JD-O-OMR34410) $29.95

4020 G,LP,Dsl - RC,STD,HI (SN# 91000-200999) Operators Manual 88 Pages (Part No: JD-O-OMR41754) $29.95

4020 G,LP,Dsl (SN# 201000 - 250000) Operators Manual 100 Pages (Part No: JD-O-OMR46934) $29.95

4020 G,LP,Dsl (SN# 250001 & UP) Operators Manual 100 Pages (Part No: JD-O-OMR48273) $29.95

Miscellaneous Related Items
Tune-up DVD
John Deere 4020, 4010 Diesel - Includes rebuilding the carburetor and distributor, oil and filter change, brake adjustment, troubleshooting and more. Step-by-step instructions. (Part No: JDV-02650) $24.00

Rebuild DVD
John Deere 4020, 4010 Diesel - Shows how to completely rebuild the tractor's engine. You'll see the engine disassembled down to the bare block and then rebuilt step-by-step in an easy-to-follow format. (Part No: JDV-02550) $24.00

Misc Repair DVD
John Deere POWER-TROL Repair - In-depth information on reparing the John Deere Power Trol. (Part No: JDV-01850) $24.00

JD Repair DVD
How to Rebuild Duplex Carburetors - Does your John Deere tractor pull but will not idle? Starts hard and runs only by working the choke? Runs for short periods and then quits? This professionally produced DVD will help you trouble shoot these problems and go through a complete overhaul of the Duplex carburetor. It is designed for the home mechanic with a basic tool box. 111 minutes. (Part No: RCR01-DVD) $24.00

How to Rebuild DLTX Series Carburetors - This DVD shows simulated running problems. You will be able to hear what problems sound like so you can identify them. It will also show how to fix plugged idle passages, what to look for when your carburetor won't idle right, how to clean, and why you need to heat brass parts before removing them. 111 minutes. (Part No: RCR03-DVD) $24.00

How to Rebuild Wico Series Magnetos - A step by step DVD on the operation, repairing, and timing of the magnetos. This DVD will show basic principles of electricity and troubleshooting problems. And then it's back to the tractor for reinstallation and timing. 103 minutes. (Part No: RCR04-DVD) $24.00

How to Rebuild Two-Cylinder Governors - This DVD shows how to rebuild governors used on John Deere tractors. You will see how to rebuild worn parts that are too expensive to replace. We will go to the machine shop and follow the machinist through the disassembly and reassembly of the gears. 121 minutes. (Part No: RCR05-DVD) $24.00

Hat
Basic black cap - With embroidered John Deere logo. (Part No: JDBL) $19.95

Basic green cap - With embroidered John Deere logo. (Part No: JDGR) $19.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Show Categories]   [Show all John Deere Models]   [Printer Friendly]  





PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.