(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 3020 Tractor Parts

[ Show Pictures ]

[Categories]   [All John Deere Models]   [Print]  


Brakes
Brake Pads for Disc/Rotor Type Brakes - For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4320, 4440. Brake Pads for Disc/Rotor Type Brakes. Sold in lots of 3, priced per each pad. 2.5" x 6.5" Pad. (Part No: AR28487)
$26.11

Brake Plate - 13.125 Diameter - 16 Teeth Use with Brake Shaft R49427 For 3020, 4030 (Part No: R3072)
$63.79

Planetary Brake Kit - Kit contains 11 friction discs, 13 separator plates, 12 seals. For model 3020 all serial numbers. (Part No: PBK500)
$1080.83

Clutch
Clutch Adjusting Tool - For tractor models 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 7020. (Part No: 830602)
$72.32

Clutch Alignment Tool - 1-1/16" 16 spline, 1-11/16" 16 spline, .67" pilot. For tractor models 2510, 3010, 2520, 3020. (Part No: S.70914)
$24.95

Clutch Bearing - For tractor models 2510, 2520, 3020, 4000, 4010, 4020. (Part No: TP-AM3983T)
$26.10

Clutch Disc - Lined clutch disc~ remanufactured. 12 diameter, 1-1/16 hub, 16 spline, woven facings, for tractors 3010, 3020 tractor serial number 6800 and up. Replaces AR41095 and R39652. For 3010, 3020 (Part No: AR42125)
$122.40

Clutch Disc, 13 - 1.250" spline diameter, 19 spline. For tractor models 3020, (4000 SN# 201000 and up), 4020, 4230, 4240, (4430 SN# 022373 and up) all with powershift. (Part No: RE29607)
$343.07

Clutch Operating Collar - With pins. For tractor models (2510, 2520, 3020 all syncro range), 3010. (Part No: AR27472)
$54.69

Clutch Spring Kit - Includes 15 inner springs (R38185), 15 outer springs (R26637) and 3 PTO return springs. For tractor models 3010, 3020, 4000, 4010, 4020. (Part No: R41414)
$53.48

Pilot Bearing - .6693" I.D. For tractor models 2840, (3010 synchro range), (3020 power shift & synchro range), (320 SN# 321209 and up), (3300 early), 40, (4000 power shift SN# 201000 and up), (4000, 4010 synchro range), 4020, 40C, (4230, 4240 power shift), 430, 4320, 435, 440, (4430 power shift SN# 022373 and up), 45, 4520, 4620, (4630, 4640, 4840 power shift), 5200, 5300, 5400, 55 single, 5500, (7020 synchro range), 830, 95, M, MT. (Part No: JD9449)
$2.82

Pressure Plate, New - Pressure Plate, 12", 26 spline, 1-11/16" hub. For tractor models 3010, 3020 (prior to SN# 097284). (Part No: RE153027)
$455.01

Release Bearing - For tractor models 2510, 2520, 3010, 3020. (Part No: TP-AR41794)
$40.50

Release Bearing - Clutch Release Bearing For tractor models 105, 3020 Power Shift, 3300, 40, (4000 Power Shift SN# 201000 and up), (4000, 4010 synchro range), 4020, (420, 430 SN# 100000 and up continously running PTO), 4320, 435, 440, 4400, 45, (55 single), 6600, 6620, 7700, 7720, 95, M, MT. Replaces: AM3983T, AR41942, AL2116, AL2116T (Part No: AR41942)
$15.60

Release Bearing - I.D. 2.557", O.D. 3.936", Thickness .704". For tractor models 1450, 1650, 2510, 2520, 3010, 3020, 5010, 5020, 5200, 5210, 5215, 5220, 5300, 5310, 5315, 5320, 5400, 5403, 5410, 5415, 5420, 5500, 5510, 5515, 5520, 5605, 5615, 5705, 5715, 6030, 7520. (Part No: AR26845)
$43.66

Remanufactured Clutch Kit - Clutch kit, for transmission and PTO clutch. Includes remanufactured pressure plate assembly, 12 inch with 10 inch PTO disc, 26 spline, 1-11/16 hub~ remanufactured clutch disc, 12 inch, 16 spline, 1-1/16 inch hub, woven lining~ new clutch and PTO release bearings(2) a Tractors: 3010, 3020 (prior to SN# 097284). There is a refundable $107.00 core charge for this clutch kit. NO WARRANTY! Verify OEM part numbers of individual pieces to ensure you are ordering the correct kit: Pressure Plate - E153027, Clutch Disc - AR42125, Release Bearing - AR26845, Pilot Bearing - 828123M2. (Part No: TP-R31311K)
$667.19

Cooling System
Fan Belt - Drive belt for fan, generator and water pump. For gas: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26606R. (Part No: R41627)
$7.49

Fan Belt - Drive belt for fan, generator and water pump. For dsl: 3010, 3020, 4010, 4020 to serial number 200999. Replaces R26607T. For 3010, 3020, 4010, 4020 (Part No: TP-R41628)
$15.06

Radiator - For 3020 gas or diesel. Replaces R34457, AR40831. (Part No: AR46016)
$390.55

Radiator Cap - For tractor models 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4320, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020, 7520, 8430, 8630. Also replaces AR28482. (Part No: R27209)
$20.18

Radiator Hose Lower - Hose, radiator lower. For tractors: 3010, 3020, 4000 less AC, 4010, 4020. For 3010, 4010 (Part No: TP-R26472)
$13.50

Radiator Hose, Upper - For tractor models 3010, 3020, 4000, 4010, 4020. (Part No: TP-R26475)
$10.71

Thermostat - 180 degree. For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, 500B, 5010, 5020, 600, 6030, 700A, 760, 760A. (Part No: R36846)
$13.38

Water Pump - For tractor models 3010, 3020, 4000, 4010, 4020 All Diesel without AC. Replaces casting numbers R26337, R27547, R34977, R34982, R41315, R41318, R44122. (Part No: AR45332)
$120.89

Water Pump - For 3010, 3020, 4010, 4020, all Gas/LP Less Air Conditioning. Water Pump. Replaces casting numbers: R44117, R34976, R34981, R41313, R41317, R44116, R44119. NOTE: THIS PUMP WILL WORK WITH A CAST PULLEY, IF YOU ARE USING A STAMPED STEEL PULLEY IT WILL RIDE DOWN TOO FAR ON THE SHAFT AND HIT THE HOUSING. THIS PROBLEM CAN BE SOLVED BY ORDERING A SPACER, PART# R52833. (Part No: AR45330)
$105.39

Water Pump Bearing - For tractor models 3020, 4000, 4020. Used on the following water pump: AR45332. (Part No: TP-JD9355)
$16.38

Water Pump Kit without Impeller - Used on pumps marked with R27547, R34977, R34982, R26337. For tractor models 3010, 3020, 4010, 4020. (Part No: MX9212)
$37.87

Decals and Emblems
Decal Set - COMPLETE Decal Set for John Deere Model 3020. For Gas and Diesel. Includes "Diesel" decal. Not for Hydro Transmission (Part No: R3780)
$30.71

Hood Ornament - For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. (Part No: AR28047)
$31.45

Side Hood Emblems, OEM Set - 37" in length with 5 mounting studs. Mounting is speed nut type, no threads. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020. Side molding with RAISED Letters. Includes Right and Left Pair. (Part No: R2533)
$138.69

Side Hood Molding - Left - 37" in length with 5 mounting studs (Fasteners NOT included). Green lettering, yellow background. Inside lettering is a decal. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 7020. Side molding with Decal - Left Side. (1526R) (Part No: AR28049)
$51.27

Side Hood Molding - Right - 37" in length with 5 mounting studs (Fasteners NOT included). Green lettering, yellow background. Inside lettering is a decal. For 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 7020. Side molding with Decal - Right Side. (1525R) (Part No: AR28048)
$51.27

Syncro-Range and Power Shift Decal Set - Set covers those decals that are different than the normally used set when used for the Syncro-Range and Power Shift Models. For 2510, 2520, 3010 before SN# 049999, 3020U, 4000 after SN# 201000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030 (Part No: AR52393)
$36.23

Drive Train
Drum, Hi-Low Range - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Part No: R31026)
$115.80

Gear Shift Lever - For tractor models 2510, 2520, 3010, 3020, 4010, 4020, 4000, 4320. Replaces R27633. (Part No: R46285)
$75.90

Shift Collar - For tractor models (2510, 2520, 3010, 3020, 340D, 4000, 4010, 4020, 440D, 448D, JD440, JD440A, JD440B all syncro range), (4030 SN# up to 015963 syncro range), (4230 syncro range up to SN# 037595). (Part No: R33383)
$125.94

Shift Collar, Reverse Range - For tractor models (2510, 2520, 3020 all with syncro drive). (Part No: R33480)
$129.32

Synchronizer - For tractor models (2010, 2510, 3010, 3020, 340D, 4000, 4010, 4020, 4320, 440C, 440D all syncro range), (4030 syncro range SN# up to 015963), (4230 syncro & quad range SN# up to 037595), (4430 syncro range SN# up to 066737), (448D, JD440, JD440A, JD440B all syncro range). (Part No: R31028)
$135.79

Transmission Drive Shaft - For industrial models: 500, 500A, 500B, 500C, all with collar shift transmission. For tractor models: 2510, 2520, 3020 all with synchro range transmissions. (Part No: R33512)
$449.13

Transmission Filter - Transmission oil filter. Filter element, cartridge type. Replaces AR28271, AR75601. For tractor models 2510, 3010, 4010, 5010, 80, 820, 1020, 1120, 1520, 2020, 2120, 2520, 3020, 4020, 4320, 4520, 4620, 5020, 7020, 7520, 830, 840, 1530, 2030, 2630, 4030, 4230, 4430, 4630, 6030, 8430, 8630, 2040, 2240, 2640, 2940, 2150, 2350, 2450, 2550. (Part No: AR75603)
$6.15

Electrical System
12 Volt Conversion Kit - Converts 24 Volt systems to 12 Volts on gas and diesel models 3010, 3020, 4010, 4020. Kit includes: New 12 Volt starter, Alternator, bracket, battery cables & wiring, solenoid, instructions. Note: converts use to a single 12volt battery. Replaces SE501474, TY16172. (Part No: TS-8000)
$380.88

Alternator - 12 volt, 51 amp. For tractor models (6000 1975-79 with 219 dsl), (600, 600A 1973-78 with 152 dsl), (700, 734 1973-78), (3020 1969-72 with 240 gas or 270 dsl), (4020 1969-72 with 360 gas or 404 dsl), (4320, 4520, 4620 1969-73 with 404 dsl), (5020 1966-72 with 531 dsl), (6030 1970-77 with 531 dsl), (7020 1971-75 with 404 Turbo dsl), (7520 1971-75 with 531 dsl), (880 1970-80 with 180/135 gas or 202 dsl), (2250 1975-78 with 225 chrysler gas), (2270 1975-78 with 219 dsl), (2280 1975-85), (2320 1981-83 with 219 dsl/225 chrysler gas), (2420 1975-85 with 219 dsl /225 chrysler gas), (3430, 3830 1985-92). Replaces RA12NJD604. (Part No: AMO0013)
$238.91

Alternator - Delco 24 Volt. Remanufactured with $30.00 core charge. For 3010, 3020, 4010 models with Diesel engines. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. ADD $30.00 Core. (Part No: TY25993)
$230.20

Battery Cable - Battery Cables: 720D, 730D with electric. start~ 3010D Row crop right hand~ 3010 Std. right hand to SN# T19800, 3020D row Syn. Range right hand to SN# 1T67999, 4010D Row & Hi Corp right hand~ to SN# 1T67999, 4010D Row & Hi Corp right hand to SN# 4010D Standard For 3010, 3020, 4010, 4020, 720, 730 (Part No: TP-AR20216)
$43.09

Battery Cable - Battery Ground Straps. 3010, 3020, 4010, 4020 Gas, left hand on diesel. 1 guage, length 10, terminal type Std. For 3010, 3020, 4010, 4020 (Part No: TP-AR26619)
$14.17

Battery Cable - Battery Cables. 300D, 3020D, 4010D, 4020D right hand. Only on diesels. 2 guage, length 61, terminal type 1-3+. For 300D, 3020, 4010, 4020 (Part No: TP-AR26621)
$40.83

Battery Cable - For tractor models 3010, 3020, 4010, 4020 left hand, only on diesels. 2 guage, length 38, terminal type 1-3+. (Part No: AR28950)
$19.24

Battery Cable - Battery Ground Straps. 2510, 3010D, 3020D, 4010D, 4020D to SN# 2T90999, 5010D to SN# 3T7999. 1 guage, length 10, terminal type Std. For 2510, 3010, 3020, 4010, 4020, 5010 (Part No: AR26622)
$11.19

Battery Ground Strap - For tractor models 1020, 1520, 2020, 2340, 3010 diesel Std. right hand to SN# 1T19799, 3010D row util~ 3020D row util. right hand to SN# 1T67999, 4010D Std. right hand to SN# 2T20199. 1 guage, length 6, terminal type Std. (Part No: TP-AT18702)
$9.96

Cab Accessory Relay - 12 Volt cab and accessory relay~ Used on: 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240 tractors~ 2420 windrowers~ 4310 beet harvester~ 85 row crop cultivator. (Part No: TP-AR54484)
$37.48

Coil, 6V - Distributor coil, 6 volt. Delco Remy equipped. For tractor models B, M, 40, 50(after 5021479), 60LP, 70LP, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 1020, 2010, 2020, 3010, 3020, 4010, 4020 - DR1115380, 1115381. For 1010, 1020, 2010, 2020, 3010, 3020, 320, 330, 40, 4010, 4020, 420, 430, 440, 50, 520, 530, 60LP, 620, 630, 70, 720, 730, B, M (Part No: TP-AM373T)
$20.94

Distributor Cap - 4 Cylinder Distributor SCREW TYPE CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Part No: 1960833)
$8.58

Distributor Cap - 6 Cylinder Distributor CAP For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Part No: TP-R11271)
$8.70

Electronic Ignition Conversion Kit, 12 volt negative ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 12 volt NEGATIVE ground system. (Part No: 1145A)
$77.90

Electronic Ignition Conversion Kit, 12 volt positive ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 12 volt POSITIVE ground system. (Part No: 1145AP12)
$86.83

Electronic Ignition Conversion Kit, 6 volt negative ground - For Tractor Models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. Electronic Ignition Conversion Kit replaces points and condenser with an electronic module. Use on a 6 volt NEGATIVE ground system. (Part No: 1145AN6)
$86.83

Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground - The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n S.66442. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 3010, 3020 with eng. 201, 227; 3020 with eng. 241. ALL using Delco # 1112623, 1112474, 1112623, or 1112648 Distributors. (Part No: 91145A)
$113.03

Generator, Delco Type, 12 Volt - For 105, 111, 115, 145, 165, 215, 217, 248, 3010, 3020, 4010, 4020, 45, 55, 95. Replaces Delco # 1100305. Remanufactured. Refundable $25.00 core charge will be added to your order. (Part No: TG-59)
$228.89

Ignition Kit, Delco Screw-Held Distributor Cap - Ignition KIT for Delco distributor with screw held cap with ROTOR For 1010, 105, 12, 2010, 215, 215A, 217, 299, 3010, 3020, 323W, 40, 4010, 4020, 45, 55, 600, 65, 700, 95, 99 (Part No: ATK10DSR)
$10.80

Ignition Switch with 2 Keys - 6 Terminal. For tractor models 2510, (5010 SN# 008000 and up), (3020 SN# 68000 to 122999), (4020 SN# 91000 to 200999), (520 up to SN# 24999), (JD500 SN# 68000 and up), (JD500A up to SN# 123113), (JD600 SN# 91000 and up). (Part No: AR39505)
$24.75

Key Switch, 6 Terminal - With key. For tractor models (1010 gas or LP up to SN# 51039), (2010 gas/LP up to SN# 055380), (3010 gas/LP), (3020 gas/LP up to SN# 067999), (4010 gas/LP), (4020 gas/LP up to SN# 090999). (Part No: AR26528)
$40.32

Key Switch, 6 Terminal - With keys. For tractor models (3010 diesel), (3020 diesel up to SN# 67999), (4010 diesel), (4020 diesel up to SN# 909990, (5010 up to SN# 7999), 8020. (Part No: AR26557)
$43.13

Light Switch, 12 Volt - 4 position, 5 terminals and fuse, .50" thread dia. For tractor models 1010, 1020, 1520, 2010, 2020, (2030 SN# up to 187300), 3010, (3020 SN# up to 067999), 4010, (4020 SN# up to 090999), 300, 301, (310 SN# up to 255718), 400, 401, (410 SN# up to 255718), (500 SN# up to 067999), (600 SN# 65000 to 90999), 760. (Part No: AR28401)
$21.95

Relay, Cab and Accessory - 12V, 80 amp contact rating relay. For tractor models 1530, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 5020, 6030, 7020, 7520, 8430, 8440, 8630, 2040, 2240. (Part No: TPAR54484)
$34.42

Solenoid - Starter Solenoids. Solenoid assy~ base mount. services starter 1113672 on model 3020D, 1T123000/up~ 4030D, 4230D, Replaces Delco 1115510{D971}, AR77255. 12 volt {B}. For 3020, 4030, 4230D (Part No: TP-R11292)
$22.20

Starter - 12 volt, 11 tooth, clockwise rotation, externally rotatable nose. For tractor models (105 1963-70 with 404 dsl), (3020 1969-72 with 270-4cyl dsl), (6602, 7700 1971-74 with 404 dsl), (4000, 4020, 3020 1969-72 with 404 dsl), (4030 1973-74 with 329 dsl), (4230 1973-75 with 404 dsl), (4320 1969-73 with 404 dsl), (4430 1973-75 with 404 dsl), (4520, 4620 1969-73 with 404 dsl), (4630 1973-75 with 404 dsl), (7020 1971-75 w. 404 turbo dsl). Replaces 1113656, 1113402, 1113672. (Part No: SDR0076)
$254.16

Starter - 24 Volt, for Diesel Tractors 3010, 3020, 4010, 4020. Starter assembly (CW rotation 10 tooth) with solenoid for 24 volt system. Can replace original Delco 1113148. An additional $75.00 will be added to your order for the core charge. This is refunded when you return the core. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1113148)
$571.11

Starter - Internally rotatable nose. For Diesel Tractors 3020 SN# 123000 & up, 4000, 4020 SN# 201000 & up, 4030, 4230, 4320, 4520, 4620, 7020. Starter Assembly with new solenoid for 12 volt system. Can replace original Delco 1113402, 1113672 and TISCO starter 83701-EX. Add $ 90.00 Core Charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1113402)
$213.90

Starter Drive - Starter drive for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: TP-AR54992)
$68.64

Starter Drive - Starter Drive assy. for Delco Remy starters in gas tractors: 3010, 3020, 4000, 4010, 4020, 4030, 4230 skid-steer loader~ 125~ engine 400 & 500, used with Delco starters 1107785, 1108289, 1109147, 1109434. Replaces starter drives AR11108, AT15140 For 125, 3010, 3020, 4000, 4010, 4020, 4030, 4230. (Part No: TP-AR57094)
$37.66

Starter Drive - Starter Drive assy. For Delco-Remy starters in diesel tractors: 3010, 3020, 4010, 4020. Used with Delco starters 1113148, 1113190. Can replace AR11133~ AR84239. 10 teeth.{Remanufactured} For 3010, 3020, 4010, 4020 (Part No: TP-AR88880)
$38.80

Starter Drive - Positork Starter Drive. For Delco-Remy starters in diesel tractors: 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 7020, 8430~Combines: 6600, 7700. Used with Delco starters 1113148, 1113190, 1113391, 1113402 For 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4630, 6600, 7020, 7700, 8430 (Part No: TP-AR88880PT)
$43.81

Starter Drive - 10 teeth. Replaces AR44700. Used with starters 1113402, 1113672, 1113391. For tractor models 180 with diesel eng., 3020 SN# 123000 and up, 4000 SN# 201000 and up, 4020 SN# 201000 and up, 4030, 4230, 4320, 4430, 4520, 4560, 4620, 6600, 6602, 7020, 7700, 8430. (Part No: AR88880)
$27.20

Starter Solenoid - Starter Solenoids. Solenoid assy~ services 1113135 & 1113148 on model 3010D, 3020D, 4010D, 4020D. 24 volt {B}. For 3010, 3020, 4010, 4020 (Part No: TP-AR40395)
$46.57

Starter Solenoid - Solenoid for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: TP-AR54991)
$51.72

Starter Solenoid - Starter Solenoids. Solenoid assy~ flange mount, services starters 1107879 or 1107577 on 1010, 2010 gas~ 1107339 on 2510~ 1107350 or 1107578 on 3010, 3020, 4010, 4020 replaces Delco 1114356, 1114256, R11240. 12 volt {A} For 1010, 2010, 2510, 3010, 3020, 4010, 4020 (Part No: TP-AR68304)
$10.12

Switch, Dimmer - Dimmer switch, for tractors: 2520 SN# 022001 and up, 3020 SN# 123000 and up, 4000, 4020 SN# 250001 and up, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 SN# 030001 and u For 4030, 4230, 4430, 4630 (Part No: AR48725)
$25.15

Voltage Regulator - For tractor models (3020 with air), (4000, 4020 with air and SN# 250001-263481), (4320 with air and SN# up to 019504), (4520 with air), (4620 with air and SN# up to 014117), (5020 with air and SN# 030329 and up), (6030 with air), (7020 with air and SN# up to 002263), 350C, 350D, 355D, 450E, 455E, (544, 544A both Duboque SN# 121500 and up or Welland SN# 85200 and up), 550B, 555, 555B, (570, 570A with engine SN# 130706 and up), (644, 644A with engine SN# 280001 and up), (646 SN# up to 223644), 690, 690A, (690B SN# up to 003872), 693B, (740 with cab and SN# up to 003872), 180, 202, 303, 329DH, 329GH, 329HC, 329HF. Replaces AT29926. (Part No: AT56592)
$62.47

Voltage Regulator, 12 Volt - External voltage regulator. 12 volt. For tractor models 3010, 3020, 4010, 4020. Replaces regulator 1118901. Flat mount. (Part No: AR40170)
$52.84

Voltage Regulator, 12 Volt - Voltage Regulator, (12 Volt). For Motorola Alternator R3JD1B, AR40420. Fits JD24, JD310, JD500, JD600, JD760A, 2250, 2270, 2280, 2320, 2420, 2510, 2520, 3020, 310A, 310B, 3430, 3830, 4000, 4020, 410, 410B, 4320, 4520, 4620, 500C, 5010, 5020, 510, 510B, 5200, 5400, 5400, 6030, 610B, 710B, 710C, 7520, 830. (410C, 510C, 610 All <-736175, JD550A, SN<-123113, (210C, 315C, 482C All SN# <-736175) (AI) (Part No: AR78298)
$49.39

Voltage Regulator, 24 Volt - For Diesels: 3010, 3020, 4010, 4020. Use with Delco Generators 1103021, 1103026. Replaces regulators 1119282 or 118957. Flat Mount. (Part No: TP-AR30155)
$81.97

Engine Bearings
Cam Bearing Set - Camshaft bearing kit, 3 bearings. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not available. For 3010, 3020 (Part No: CBK-D434)
$25.08

Cam Bearing Set - For 3010, 3020. Cam Bearing Set for 1 engine. Replaces 3-R46930. (t) (Part No: CBKD434)
$34.86

Main Bearing Set - Main bearing kit, standard, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77748 & 4-AR74814. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not a For 3010, 3020 (Part No: MBK1436)
$131.17

Main Bearing Set - Main bearing kit, .010, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77750 & 4-AR74816. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. TISCO supplies 4-1/4 standard bore, For 3010, 3020 (Part No: MBK1436-010)
$131.17

Main Bearing Set - Main bearing kit, .020, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77751 & 4-AR74817. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not avai For 3010, 3020 (Part No: MBK1436-020)
$131.17

Main Bearing Set - Main bearing kit, .030, with flanged thrust bearings, 1 kit used per engine. Replaces 1-AR77747, 1-AR77752 & 4-AR74818. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1/4 standard bore, 3 ring piston. Individual bearings not avai For 3010, 3020 (Part No: MBK1436-030)
$131.17

Main Bearing Set - Available in STD, .010, .020, .030 For 3020 (To S#122999) with 227 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-836P)
$92.89

Main Bearing Set - Available in STD, .010, .020 For 3020 (From S#123000) with 241 Gas Engine. Specify size in Comments box when ordering. (Part No: MS-1526P)
$179.62

Main Bearing Set - Available in STD, .010, .020, .030. For tractor models 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. Specify size in Comments box when ordering. (Part No: R-AR49243S4)
$127.58

Main Bearing Set - Available in STD, .010, .020, .030. For tractor models 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR46350, R46430, R40910 &(From Eng S#280001) All. Specify size in Comments box when ordering. (Part No: R-AR74814S4)
$150.54

Main Bearing, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 andup 6.404T/A 6 cyl eng.), (4440 with 6.466T & SN# less than 233592 & 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above & 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Part No: AR74816)
$22.50

Main Bearing, Std - Single bearing. For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Part No: AR74814)
$23.62

Rod Bearing Pair 030 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: TP-AR46398)
$19.26

Rod Bearing Pair, .020 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: TP-AR46397)
$19.26

Rod Bearing Pair, 010 - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4320, 4430, 4520, 4620, 4630, 7020. (Part No: TP-AR46396)
$19.26

Rod Bearing, Pair STD - SINGLE bearing for the following 4 & 6 cylinder Gas and Diesel engines: 201, 230, 254, 381, 404. Used on the following tractors: 3010, 3020, 4010, 4020, 4320, 4520, 4620, 7020. Specify size and quantity needed when ordering. Sizes available: STD, .010, .020 or .030. (Part No: TP-AR45723)
$19.26

Thrust Bearing Set, .010 - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 SN# 335845 and below 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6 cyl eng.), (4055 SN# 500000 and up 6.076T, 6.076H, 6.076A 6 cyl eng.), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.), (4255 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4320 with 6.404T/A 6 cyl eng.), (4430 SN# 335845 andup 6.404T/A 6 cyl eng.), (4440 with 6.466T & SN# less than 233592 & 317859 and above with 6.466A 6 cyl eng.), (6.466T SN# 253373 and above & 6.466A SN# 317859 and above 6 cyl eng.), (4455 SN# 6.076H SN# 500000 and up 6.076T, 6.076A 6 cyl eng.), (4520 SN# less than 335845 6.404T/A 6 cyl eng.), (4555, 4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6 cyl eng.), (4620 SN# 335845 and below 6.040T/A 6 cyl eng.) (Part No: AR77750)
$48.93

Thrust Bearing Set, Standard - For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Part No: AR77748)
$36.52

Engine Gaskets
Crankshaft Seal, Front - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Part No: AR49025)
$18.63

Crankshaft Seal, Rear - For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Part No: RE22764)
$38.55

Engine Gasket Overhaul Set with Seals - Gas - For 3020 with a 241 CID Gas engine with serial number 123000 and up. (Part No: 351249)
$240.98

Front Crank Seal - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-AR49025)
$23.41

Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 3010, 3020 with 270 Diesel Engine (To Eng S#280000). (Part No: R-AR53033)
$133.46

Full Gasket Set - With Rear Main Seal & Timing Cover Seal For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-AR53035)
$132.54

Gasket Set - Complete gasket set with crankshaft seals and sleeves (where required), 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1/4 standard bore, 3 ring piston. For 3020 (Part No: FS3221)
$202.78

Head Gasket Set - For 3020 (To S#122999) with 227 Gas Engine (Part No: HS3217VY)
$88.45

Head Gasket Set - For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) (Part No: R-AR53032)
$63.46

Head Gasket Set - For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-AR53034)
$76.15

Main Seal Front - For tractor models 1010, 1010 GAS, 145G SN# 30001>, 2010, 2010 GAS, 217G SN# 40001>, 2510, 2520, 3020, 340D, 4000, 4010, 4020, 4230, 4320, 440C, 440D, 448D, 4430, 4520, 4620, 500C, 5010, 5020, 510, 55 SN# 59282>, 7020, 95 SN# 51615>, 440, 440A, 440B, 500, 500 SN# <123113, 500A, 500B, 600, 700A, 760, 760A. Replaces (R35798) USED WITH 1000 RPM PTO. (Part No: AT344T)
$11.17

Oil Pan Gasket - Pan gasket. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. TISCO supplies 4-1/4 standard bore, 5 ring piston. For 3010, 3020 (Part No: R71917)
$22.68

Rear Crank Seal - For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-RE17352)
$43.73

Rear Main Seal - For model 3020 (To S#122999) with 227 Gas Engine. (Part No: SS46829)
$38.99

Rear Main Seal - For model 3020 (From S#123000) with 241 Gas Engine. (Part No: SS46829)
$38.99

Rear Main Seal - For 3010, 3020 and 3030 before SN# 280000 with 270 Diesel Engine. (Part No: R-RE22764)
$38.63

Seal - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. Must order in quantities of 2, price is for 1. (Part No: TP-AR26480)
$14.19

Upper Gasket - Valve grind set. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. TISCO supplies 4-1/4 standard bore, 5 ring piston. For 3010, 3020 (Part No: HS3217VX)
$73.66

Upper Gasket - Valve grind set. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. TISCO supplies 4-1/4 standard bore, 3 ring piston. For 3020 (Part No: HS3221)
$76.18

Engine Rebuild Kits
Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO s For 3010, 3020 (Part No: BIFD1431)
$654.23

Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 & R40840 only. Contains complete sleeve and piston kit with rings, pins & retainers, valve grind gasket set and pan gasket. TISCO supplies 4-1/4 standard bore For 3020 (Part No: BIFD1432)
$492.40

Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO supplies 4-1/4 standard bore, 5 ring piston For 3020 (Part No: BIFD1436)
$668.31

Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO supplies 4-1/4 standard bore, 3 ring piston For 3020 (Part No: BIFD2703)
$829.24

Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO s For 3010, 3020 (Part No: BIFD3431-5)
$667.40

Basic In-Frame Overhaul Kit - Basic In-Frame engine kit. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Contains complete sleeve and piston kit with rings, pins & retainers, connecting rod bolts, valve grind gasket set and pan gasket. TISCO s For 3010, 3020 (Part No: BIFD4470)
$908.36

Basic Overhaul Kit - Made by TISCO. Basic engine kit, less bearings. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 & R40840 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals. Order b For 3020 (Part No: BEKD1432-LCB)
$631.06

Basic Overhaul Kit - Made by TISCO. Basic engine kit, less bearings. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Order bearings separa For 3020 (Part No: BEKD1436-LCB)
$676.92

Basic Overhaul Kit - Made by TISCO. Basic engine kit, less bearings. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. Order bearings separa For 3020 (Part No: BEKD2703-LCB)
$964.50

Basic Overhaul Kit - Made by TISCO. Basic engine kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, For 3010, 3020 (Part No: BEKD3431-5-LCB)
$781.95

Basic Overhaul Kit - Made by TISCO. Basic engine kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, For 3010, 3020 (Part No: BEKD4470-LCB)
$1067.84

Engine Major Overhaul Kit - For 3020 Gas SN<122999, (500, 500A, 500B, all with SN<123113), all 227 CID, Gas, 4 cylinder, 4.25" bore, 4 ring piston. Engine Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, or .020, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK227)
$1035.51

Engine Major Overhaul Kit - For tractor models 3020, 500, 500A, all with SN<280000, 4.270 Diesel, 400 Series, 6 Cylinder, Block #s R46350, R46430, R40910, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17898)
$1143.79

Engine Major Overhaul Kit - Made by TISCO. For 3010, 3020, 500, 500A all with SN<280000, 4.270 Diesel, 400 Series, 4 cylinder, 4.25" bore, 1.50" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17899)
$825.24

Engine Major Overhaul Kit - For 3010, 3020, JD500, JD500A, JD500B, all SN<280000 Early Power booster, 4.270 Diesel, 400 Series, 4 cylinder, EXCEPT Blocks R46350, R46430, R40910, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: OK4163)
$1134.36

Engine Major Overhaul Kit - For 3020, 500C, 520, 500A, 500B all with SN# 280001>, 4.270 Diesel, 400 Series, 4 Cylinder, Block #s R40700, R47520, R48430, R50610, R72127, R40620, R40910, R45950, 4.25" bore, 1.5" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG17900)
$1145.22

Engine Overhaul Kit - Made by TISCO. For 3020 with 227 Gas Engine up to SN# 122999, 4 1/4 inch bore. Engine Overhaul Kit includes Sleeves, Pistons, Pins, Rings, Retainers, Main Bearings, Rod Bearings, Gaskets. Bearings available in Standard, .010, .020, .030. Specify bearing size in comments section of order form when ordering. (Part No: R3441-OHK)
$774.67

In-Frame Overhaul Kit - 4 1/4 Bore. For model 3020 (To S#122999) with 227 Gas Engine. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: R3441-IFK)
$637.56

In-Frame Overhaul Kit - 4 1/4 Bore with Original Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-270E-IFK)
$746.81

In-Frame Overhaul Kit - 4 1/4 Bore with Power Booster Pistons with Original Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-270EPB-IFK)
$851.49

In-Frame Overhaul Kit - 4 1/4 Bore with Replacement Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR46350, R46430, R40910. Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-270ERB-IFK)
$844.92

In-Frame Overhaul Kit - 4 1/4 Bore For 3020 with 270 Diesel Engine (From Eng S#280001). Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-270L-IFK)
$782.71

In-Frame Overhaul Kit - 4 1/4 Bore with Power Booster Pistons. For model 3020 with 270 Diesel Engine (From Eng S#280001). Contains Pistons with pins and retainers, piston sleeves, head gasket set, oil pan gasket set, rod bearings, main bearings. (Part No: JD-270LPB-IFK)
$846.27

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK1431A-LCB)
$1041.94

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 3020 gas, 4 cyl. 227 CID. To SN# 122999. Use with block numbers R33190 & R40840 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, complete gasket set, crankshaft seals, inta For 3020 (Part No: EOK1432-LCB)
$845.90

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, SN# 123000 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valve For 3020 (Part No: EOK1436-LCB)
$930.62

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, SN# 123000 & up. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valve For 3020 (Part No: EOK2703-LCB)
$1196.07

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK3431A3-LCB)
$1102.27

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK3431A5-LCB)
$929.32

Overhaul Kit - Made by TISCO. Engine overhaul kit, less bearings. For 3020 diesel, 4 cyl. 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Kit contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket se For 3020 (Part No: EOK4471-LCB)
$1301.99

Overhaul Kit - 4 1/4 Bore with Original Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-270E-OHK)
$846.24

Overhaul Kit - 4 1/4 Bore with Power Booster Pistons with Original Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-270EPB-OHK)
$964.67

Overhaul Kit - 4 1/4 Bore with Replacement Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR46350, R46430, R40910. Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-270ERB-OHK)
$913.50

Overhaul Kit - 4 1/4 Bore For 3020 with 270 Diesel Engine (From Eng S#280001). Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-270L-OHK)
$865.92

Overhaul Kit - 4 1/4 Bore with Power Booster Pistons. For model 3020 with 270 Diesel Engine (From Eng S#280001). Contains Pistons with pins and retainers, piston sleeves, overhaul gasket set, rod bearings, main bearings. (Part No: JD-270LPB-OHK)
$905.18

Valve Overhaul Kit - Cylinder HEAD Overhaul Kit. Contains intake & exhaust valves, springs, guides, and keys. 1 kit used in 201 CID 4 cylinder gas engine (block # R26150) & 227 CID 4 cylinder gas engine (to SN# 122999). For tractor models 3010, 3020. (Part No: VOKD227)
$215.09

Valve Service Kit - Cylinder HEAD Service KIT. For tractor models (3010, 3020 with 201 or 227 CID 4 cylinder gas engines). Contains: springs, guides, locks, (no valves). (Part No: VSKD227)
$76.40

Valve Service Kit - For tractor models (3010, 3020 with 257 or 270 CID 4 cylinder diesel engines). Contains: springs, guides, locks, (no valves). (Part No: VSKD254)
$99.48

Engine Parts
Connecting Rod, Reconditioned - For tractor models: 3010, 3020, 4010, 4020 all gas with casting # R44257. (Part No: R1203421)
$86.53

Connecting Rod, Reconditioned - For tractor models: 3010, 3020, 4010, 4020 all with gas engine and casting # R26046 or R44257. (Part No: R1202092)
$99.90

Crankshaft - ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** For tractor models 3010, 500A, 3020 Diesel to replace crankshaft marked R40570, (JD500, JD500A, JD500B, 510, all Diesel to replace crankshaft marked R40570), 500 with SN# below 123113, (500B, 500C, both with SN# above 280000 with 4.270 4 cylinder engine. Crankshaft. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: AR40485)
$2069.50

Cylinder Head Overhaul Kit - For model 3020. (Part No: VOKD270A)
$257.65

Cylinder Head Overhaul Kit - Cylinder HEAD Overhaul Kit For 3020 (Part No: VOKD270B)
$254.87

Float Valve - Viton needle float valve. ForModels: 3010, 3020, 4010, 4020, using Marvel Schebler. Also substitute for AR10105R. (Part No: AR10114V)
$11.96

Flywheel - With Ring Gear - 12 Square Pin Hole Style For 3010, 3020, 4000, 4010, 4020Diesel with Syncro Transmission (Part No: R2323)
$528.64

Flywheel with Ring Gear - For tractor models JD500, JD500A, JD500B, JD600, 3010, 3020, 4010, 4020, 500C, ALL WITH DIESEL / SYNCRO TRANS., FOR SQUARE PIN HOLE STYLE FLYWHEELS. Flywheel with #R28811 Ring Gear. (Part No: AR40565)
$525.09

Lifter, New - Cam Followers Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T/A), 4440 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4450 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4520 (SN <335845, 6.404T/A), 4620 (SN <335845, 6.404T/A), 4630 (SN 335845>, 6.404T/A), 4640 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4650 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, & 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, & 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, & 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Part No: R52773)
$11.50

Lifter, Refaced - Cam Followers marked R52773 Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T/A), 4440 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4450 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4520 (SN <335845, 6.404T/A), 4620 (SN <335845, 6.404T/A), 4630 (SN 335845>, 6.404T/A), 4640 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4650 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, & 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, & 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, & 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Part No: R52773R)
$8.00

Ring Gear - For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570. Starter Flywheel Ring Gear for DIESELS. (t) (Part No: TP-R28811)
$70.70

Thrust Washer - For tractor models (3020 SN# 280000 and up 4.270 4 cyl eng.), (4000 SN# 215000-335845 6.404D 6 cyl eng.), (4010 SN# 214999 and below 6.404D 6cyl eng.), (4020 up to SN# 335845 6.404D 6cyl eng.), (4040 SN# 335845 and up), (4050 SN# 335846 and up 6.466D 6cyl eng.), (4055 SN# 500000 and up 6.076H, 6.076T or 6.076A 6cyl engines), (4230 SN# 335845 and up), (4240 SN# 335846 and up 6.466D 6 cyl eng.), (4250 6.466T with SN# 253373 and up & 6.466A SN# 317859 and up 6cyl eng.), (4255 SN# 500000 and up 6.076T, 6.076A, 6.076H 6cyl eng.), (4320 6.404T/A 6cyl eng.), (4430 SN# 335845 and up 6.404T/A 6cyl eng.), (4440 6.466T SN# 253372 and less & 6.466A SN# 233592 and less 6 cyl eng.), (4450 6.466T with SN# 253373 and up & 6.466A SN# 317859 and up 6cyl eng.) (Part No: AR77747)
$29.85

Valve Guide, Intake & Exhaust - Sold in multiples of 4, priced individually. 8 used in 254 CID 4 cylinder diesel engine (block numbers R26160, R40910, R46350, R46430 only), 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 12 used in 381 CID 6 cylinder diesel engine; 12 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 3010, 3020, 4010, 4020. (Part No: R28654)
$8.07

Valve Service Kit - Cylinder HEAD Service KIT For 1530, 2020, 2030, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 3020. Contains: springs, caps, locks, (no valves or guides). (Part No: VSKD202)
$76.26

Valve, Exhaust - Sold in multiples of 2, priced individually. 4 used in 201 CID 4 cylinder gas engine (block # R26150) & 227 CID 4 cylinder gas engine (to SN# 122999); 6 used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 6 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870, to SN# 200999). For tractor models 3010, 3020, 4010, 4020. (Part No: R42420)
$12.27

Valve, Exhaust - For tractor models 3020, 4000, 4020, 4040, 4230, 4320, 4520, 4620, 7020. (Part No: TP-R43679)
$29.24

Valve, Exhaust - Sold in multiples of 2, priced individually. 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. (Part No: R44175)
$18.65

Valve, Intake - Sold in multiples of 2, priced individually. 4 used in 201 CID 4 cylinder gas engine (block # R26150) & 224 CID 4 cylinder gas engine (to SN# 122999); 6 used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 6 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870 only, to SN# 200999). For tractor models 3010, 3020, 4010, 4020. (Part No: R26109)
$10.41

Valve, Intake - For tractor models 3020, 4000, 4020, 4040, 4230, 4520. (Part No: TP-R43883)
$28.63

Valve, Intake - Sold in multiples of 2, priced individually. 4 used in 270 CID 4 cylinder diesel engine (block numbers R32020, R40850 only, to SN# 280000); 6 used in 404 CID 6 cylinder diesel engine (to SN# 214999, block numbers R33180, R34340, R40890, R40900, R40930 only). For tractor models 500, 500A, 500B, 600, 3010, 3020, 4000, 4010, 4020. (Part No: R44174)
$17.24

Engine Pistons and Sleeves
Piston Kit - Sleeve & piston kit, complete, one used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. Sleeves and 5 ring pistons & rings, pins & retainers, for 4-1/4 bore. For 3010, 3020 (Part No: PK431)
$623.59

Piston Kit - Sleeve & piston kit, complete, one used per engine. For 2020 gas, 4 cylinder 227 CID, to SN# 122999. Use with block numbers R33190 & R40840 only. Sleeves & 4 ring pistons & rings, pins & retainers, for 4-1/4 bore. For 3020 (Part No: PK432)
$471.85

Piston Kit - PISTON KIT For 3010, 3020 (Part No: PK436)
$621.46

Piston Kit - Sleeve & piston kit, complete, one used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Sleeves and 3 ring pistons & rings, pins & retainers, for 4-1/4 bore. For 3010, 3020 (Part No: PK470)
$773.74

Piston Kit - Sleeve & piston kit, complete, one used per engine. For 3020 diesel, 4 cylinder 270 CID, SN# 123000 & up. Sleeves and 3 ring pistons & rings, pins & retainers, for 4-1/4 bore. For 3020 (Part No: PKD270)
$738.69

Piston Pin Bushing - 6 used per engine. For 4020 gas, 6 cylinder 340 CID, to SN# 200999. Use with block numbers R33170, R34330, R40860 & R40870 only. TISCO supplies 4-1/4 standard bore 4 ring piston. For tractor models 3010, 3020, 4010, 4020. Must be ordered in multiples of 2, priced individually. (Part No: R30929)
$21.12

Piston Pin Bushing - Piston pin bushing, 6 used per engine. For 404 CID 6 cylinder diesel engine, 4.25 standard bore. 3 ring piston, keystone top compression ring. For 3010, 3020, 4000, 4010, 4020, 4040, 4230, 500, 500A, (500B, 500C, 510 SN# 280000 and up), (600 SN# 335845 and below), (6600 SN# 215000 and up), (7700 SN# 215000 and up), (JD500, JD500A, JD500B SN# 280000 and below). Sold in multiples of 2, priced individually. (Part No: R30939)
$14.13

Piston Sleeve - For tractor models (500, 500A, 500B, 3010, 3020 up to SN# 180000 with 4.270 4 cylinder and early power booster engine), (600, 4000, 4010, 4020 SN# up to 214999 with 6.404D engine). (Part No: R32050)
$66.47

Sleeve & Piston Kit - 4 1/4 Bore. For tractor models 3020 (To S#122999) with 227 Gas Engine. (Part No: R3441)
$439.69

Sleeve Assembly (4 Required) - 4 1/4 Bore with Original Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385 (Part No: R-RE23173)
$159.47

Sleeve Assembly (4 Required) - 4 1/4 Bore with Power Booster Pistons with Original Block. For tractor models 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR26160, R32020, R40850, R46385. (Part No: R-CK270-EPB)
$174.35

Sleeve Assembly (4 Required) - 4 1/4 Bore with Replacement Block For 3010, 3020 with 270 Diesel Engine (To Eng S#280000) with Block #sR46350, R46430, R40910 (Part No: R-RE23170)
$163.01

Sleeve Assembly (4 Required) - 4 1/4 Bore For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-RE23165)
$163.01

Sleeve Assembly (4 Required) - 4 1/4 Bore with Power Booster Pistons For 3020 with 270 Diesel Engine (From Eng S#280001) (Part No: R-RE23160)
$180.74

Engine Rings
Piston Ring Set - Ring set for 5 ring piston, 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R32020 & R40850 only. TISCO supplies 4-1/4 standard bore, 5 ring piston. For 3010, 3020 (Part No: PRS431)
$101.51

Piston Ring Set - Ring set for 4 ring piston, 1 used per engine. For 3020 gas, 4 cylinder 227 CID, to SN# 122999. Use with block numbers R33190 & R40840 only. TISCO supplies 4-1/4 standard bore 4 ring piston. For 3020 (Part No: PRS432)
$58.36

Piston Ring Set - Ring set for 5 ring piston, 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. Also SN# 123000 & up. Sleeves and 5 ring pistons & rings, pins & retainers, for 4-1/4 bore. For 3010, 3020 (Part No: PRS436)
$97.68

Piston Ring Set - Ring set for 3 ring piston, 1 used per engine. For 3020 diesel, 4 cylinder 270 CID, to SN# 122999. Use with block numbers R46350 & R46430 only. TISCO supplies 4-1/4 standard bore, 3 ring piston, Keystone top compression ring. For 3010, 3020 (Part No: PRS470)
$158.42

Exhaust System
Chrome Curved Exhaust Stack 24 Inch - Double Walled, 24" Tall, 2 15/16" Flared I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4264)
$142.01

Chrome Curved Exhaust Stack 48 Inch - Double Walled, 48" Tall, 2 15/16", Flared IDl, 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4265)
$218.79

Chrome Stack, Curved - 36" double wall, 2-15/16" inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R5114)
$218.79

Chrome Stack, Straight - 36", double wall, 2-15/16" flared inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4887)
$197.96

Chrome Stack, Straight - 48", double wall, 2-15/16" inlet I.D., 5" O.D.. For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4888)
$208.37

Chrome Straight Exhaust Pipe - Double walled, 24" Tall - 2 15/16" Flared I.D. - 5" O.D.. For 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, (4050 up to SN# 5510), 4240. (Part No: R4263)
$135.44

Muffler - Vertical muffler~ round body. 2-15/16 inlet inside diameter~ 2-5/8 exhaust outside diameter~ 26 body length~6 body diameter. For tractor models: 3010 gas, 3010 diesel to engine serial number 6643, 3020 gas to tractor serial number 122999. For 3010, 3020 (Part No: TP-AR26786)
$64.03

Muffler - Vertical Exhaust Inlet I.D. - 2 15/16 Outlet O.D. - 2 5/8 Overall Length - 26 For 3010, 3020, 4000, 4010, 4020Gas and LP Gas3010 (To S#6643), 4010 (To S#7026)Diesel. OEM# AR26786, Use R1756 Clamp, Use R1804 Rain Cap (Part No: R1081)
$49.37

Muffler - Vertical Exhaust Inlet I.D. - Flared Outlet O.D. - 2 1/4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4230 Diesel. OEM# AR86595, Use R2051 Clamp, Use R1801 Rain Cap (Part No: R1085)
$59.14

Muffler - Vertical Exhaust Inlet I.D. - 2 15/16 Outlet O.D. - 2 1/4 Overall Length - 27 For 3020 (From S#123000), 4000, 4020 (From S#201000), 4230Gas. OEM# Use R1756 Clamp, Use R1801 Rain Cap (Part No: R1675)
$57.71

Muffler, Vertical - Oval body. Inlet 2-15/16" I.D, outlet 2-1/4" O.D, 27" overall length. For tractor models 3020 gas SN# 123000 & up, 4000, 4020 gas SN# 201000 & up, 4230. (Part No: TP-AR41172)
$65.04

Fuel System / Air Intake
Air Cleaner Bowl - Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top: 7-1/4~ side height: 3~ cone inside diameter at top: 3-1/2~ overall height: 4-1/8. For tractors: 1010 dsl, 2010, 2020 dsl, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Part No: R28794)
$7.98

Carburetor Float - For 3010, 3020, 4000, 4010, 4020. Carburetor Float for Zenith. (Part No: AH10620)
$26.75

Carburetor Gasket Set - Used on carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For 3010, 3020, 4010, 4020. (Part No: CGK41)
$3.31

Carburetor Kit, Basic - Kit for Zenith 12510, 13429, 12879, 13320, 13450, 13430 carbs on 3010, 3020, 4020. John Deere Carb: AR34243, AR45161, AR45162, AR52450, AR55368 (Part No: Z106)
$29.96

Carburetor Repair Kit - Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture number USX21, USX31, USX36, USX49SL. Tractor manufacture carburetor numbers AR34242R, AR28636R. For tractor models: 3010, 3020. For 3010, 3020 (Part No: BK372V)
$38.33

Carburetor, Rebuilt - Fits 3010, 3020, 4010, 4020 - replacement for OEM USX20, USX21, USX30, USX31, USX35, USX36, USX48. Add $100.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1532-CARB)
$310.41

Carburetor, Rebuilt - Fits 3010, 3020, 4010, 4020 - replacement for OEM 12510, 12879, 13320, 13429, 13430. Add $200.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1534-CARB)
$278.31

Fuel Filter - Fuel filter element, cartridge type, for diesel tractors with dual filters. Models: 3010, 3020, 4000, 4010, 4020, 4520, 5020. For 3010, 3020, 4000, 4010, 4020, 4520, 5020 (Part No: TP-AR44077)
$10.95

Fuel Filter - Fuel filter element, spin-on type, for diesel tractors with dual filters. Models: 3020, 4020, 5010, 5020. (Part No: TP-AR45097)
$7.11

Fuel Injector - For tractor models JD 3010, 3020, 4010, 4020 model tractors with injector #20494. replaces AR39811 and AR46846. (Part No: AR50781)
$33.75

Fuel Injector - Nozzle, Injector. Pencil-type injector For tractor models 840, 940, 1020, 1030, 1040, 1129, 1139, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2040S, 2120, 2130, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2440, 2450, 2550, 2555, 2840, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3120, 3130, 3140, 3150, 3155, 3350, 3640, 4020. Replaces: AT25502, AT30299, AR49877, AR56290, AR73673, AR88239, AT18064, SE500822, SE500823, ROOSA # 22202. (Part No: AR89564)
$38.67

Fuel Pump - Fuel transfer pump, similar to original equipment manufacturer, cannot be repaired. Diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050 (6359TP), 5020, 6030. Gas tra For 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Part No: TP-RE42211A)
$62.44

Fuel Pump - This fuel pump is for diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. Replaces OEM numbers AR42211B, AR49770, AR52159. (Part No: TP-RE42211B)
$25.49

Fuel Pump - For 3010 (SN# <280000 4.270 4Cyl Eng & Early Power Booster Eng, 3020 (with 4.270 4Cyl Eng & Early Power Booster Eng), 4010. Replaces: AR26672, AR26675, AR40508, AR40509, AR53567, RE36904, RE43273. (Part No: AR53567)
$40.45

Fuel Tank Cap - For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Part No: AT20911)
$4.92

Fuel Transfer Pump Repair Kit - Repair kit, for fuel transfer pump RE42211, RE42211B. Used on diesel tractors: 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050(6359TP), 5020, 6030. For Gas tractors : 1520, 2030, 1020, 1520, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 2750, 2950, 2955, 3020, 3150, 3155, 4000, 4020, 4030, 4050, 4230, 5020, 6030 (Part No: RE42211RK)
$40.56

Glass Body Fuel Filter - Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Part No: AR50041)
$19.13

Grommet, Fuel Filler, Black - For tractor models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7/8 inch outside diameter, 2 1/4 inch inside diamter, and 3 1/2 inch diamter on underside lip. (Part No: A5157R)
$19.95

Grommet, Fuel Filler, Red - For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). (Part No: R39613R)
$26.25

Precleaner Cover, Metal - 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Part No: AF3583R)
$26.48

Speed Control Rod End Joint - Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Part No: AA5302R)
$12.25

Throttle Knob - Plastic. For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020. (Part No: R26670)
$7.88

Gauges
Fiber Optic Lead - This fiber optic lead is 8 inches long. It is used on the following tractors with side console: 2520, (3020 Serial Number 12300 and up), 4000, (4020 Serial Number 201000 and up), 4520. Replaces original part number AR48016 (Part No: AR48016)
$29.85

Fuel Gauge - This Fuel Gauge is Negative ground. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 5010, (5020 up to SN# 24999). Replaces AR46271, AT27153, RE54427. Ensure it is installed as Negative Ground or it will not work and damage the gauge. (Part No: R34262)
$40.43

Fuel Gauge - This fuel gauge is for 12 Volt NEGATIVE Ground Systems Only, Gas or Diesel. For 2 inch outside diameter opening, 1 1/2 inches thick gauge housing. It is 30 To 250 OHM Rating. Used on the following: 2520, (3020 serial number 123000 and up), (4020 serial number 201000 and up), 4320, 4520, 4620, (500A serial number 123114 To 152141), 500B, (5020 serial number 025000 and up), 6030, 7020, 7520; Replaces: AR45436, AT375294 (Part No: AT375294)
$39.85

Fuel Sending Unit - Fuel Tank Sending Unit for tractor models (3020 Serial number 123, 000 and up), (4000 and 4020 serial number 201, 000 and up), 4320 and (Industrial 600 serial number 201, 000 and up). (Part No: AR46268)
$53.12

Fuel Sending Unit - This fuel sending unit fits the following tractor models: 500 (Gas serial number 67999 and below), 860 and 860A (serial number 001000 and below), 3010, 3020 (serial number 122999 and below), 4010, 4020 and 600 (serial number 200999 and below). Replaces part number AR26434. (Part No: AR26434)
$54.15

Tachometer Cable - 33" long. For tractor models 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AR26721)
$14.93

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853 (Part No: RE206853)
$182.85

Tachometer With Red Needle - This tachometer with red needle was used through 1968. It has no provision for fiber optic light or illumination. It is used on the following Gas & Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Part No: RE206854)
$124.13

Tachometer With White Needle - This tachometer with white needle has provision for fiber optic light and illumination. It is used on the following Gas and Diesel tractors with Syncro range transmission: 2510, 2520, 3020. It replaces original part numbers: AR32838, AR39909, AR39910, AR45442, AR48019, AR50400, AR50404, RE206853 (Part No: AR50404)
$124.13

Tachometer With White Needle - This tachometer with white needle has a provision for fiber optic light and illumination. It is used on the following Gas & Diesel Tractors with Power Shift transmission: 2510, 2520, 3020, (4020 serial number 250001 and up). Replaces original part numbers: AR32830, AR39904, AR45443, AR48020, AR50401, AR50405, RE206854 (Part No: AR50405)
$124.13

Transmission Oil Temperature Gauge - For tractor models 2510, (3020 up to SN# 122999), (4020 up to SN# 200999). (Part No: R34258)
$39.95

Transmission Oil Temperature Gauge - For tractor models (3020 SN# 123000 and up), (4020 SN# 201000 and up), 4320, 4520, 4620. (Part No: AR46979)
$43.90

Water Temperature Gauge - For tractor models 2520, (3020 SN# 123000 and up), 4000, (4020 SN# 201000 and up), 4320, 4520, 4620, 7020. (Part No: AR48640)
$43.13

Water Temperature Gauge - This water temperature gauge has a 29inch lead. Max temperature is 250 degrees and minimum is 100 degrees. It has no provision for fiber optic light. It has a 2.045 inch housing diameter and a 2.324 inch bezel diameter. Fits John Deere - [ 2510, 5010 (For Gas & Diesel through 1968) ], 3020 (For gas & Diesel through 1968 (up to SN: 122999)), 4020 (For gas & Diesel through 1968 (up to SN: 200999)), 5020 (For Gas & Diesel through 1968 (up to SN: 024999)); Replaces: AR36383, R34263 (Part No: R34263)
$39.85

Hitch / Drawbar
Cat II Top Link - For tractor models 2510, 2520, 3020, 4000, 4020 (To S#24999) 4030, 4230. (Part No: AR34208)
$191.75

Drawbar Pin, Front - For tractor models 2510, 2520, 3020, 4000, 4010, 4020, 4030. All Hi-crop or Row-crop models. (Part No: AR27599)
$27.06

Drawbar, Offset - 2.50 Offset - Heavy Duty 1.250 x 2.50 x 44.750 (1.010" Holes at 1.060, 2.310, 4.360, 7.050, 9.050 & 12.30 inches). For 2510, 2520, 4000, 4010, 4020, 4030HD, Hi-Crop 3020, 4010 HD Hi-Crop, HD Row Crop with Std Wide Swing. (Part No: R81576)
$182.55

Drawbar, Offset - 2.50" Offset. Size is 1.250" x 2.50" x 44.750" Bar has 1.010" Holes at 1.060 & 2.310 & 4.360 & 7.050 & 9.050 & 12.30 inches. For 2510 Hi-Crop, Row Crop Wide Swing, 2520 Hi-Crop, Row Crop Wide Swing, 3010 Row Crop, Std Wide Swing, 3020 Rop Crop, Orchard, 4000 Hi-Crop, 4010 Row Crop, 4010 Row Crop with Wide Swing, 4020 Hi-Crop, 4030 Row Crop. *An additional $10 shipping charge applies due to weight/size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: RE20662)
$205.72

Front Pull Arm, RH - Right Hand - Telescoping Style For 2510, 2520, 3010, 3020, 4030 (Part No: AR32547)
$240.24

Lift Link Knuckle - For model s:3010, 3020, 4010, 4020 (To S#200999). (Part No: R3884)
$55.30

Lift Link Rod - Rod is 25 5/8 inches in length. For 2510, 3010, 3020, 4010, 4020, 600. Verify length needed. (Part No: R26611)
$91.31

Lift Link Rod - For tractor models 3010, 3020, 4010, (4020 up To S#200999). (Part No: R3115)
$97.60

Lift Link, Adjustable - Works on either RH or LH side. For tractor models 3010, 3020, 4010, (4020 SN# up to 200999). (Part No: AR44555)
$247.59

Load Control Shaft Seal - 2 Seals reauired per tractor. For tractor models 500, 2510, 2520, 3010, 3020, 4030 (Part No: AR27371)
$4.42

Pull Arm Latch - For tractor models 2510, 2520, 2840, 2940, 2950, 2955, 3020, (3030, 3130 SN# 166430 and up), 3040, 3055, 3120, 3140, 4000, 4020, 4040, (4040S, 4240S SN# less than 347554), 4230, 4240, 4250, 4255, 4430, 4455. Replaces AR30288, AR69317. (Part No: AR90082)
$45.21

Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 & 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Part No: AR28570)
$168.13

Rockshaft Control Cable - For tractor models 2510, 3010 and early 3020 before SN# 122999. (Part No: AR26810)
$87.04

Rockshaft Cover Shield - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: R41663)
$23.62

Sway Block - Left Hand For 2510, 2520, 3020, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430 (Part No: R3139)
$56.70

Sway Block, RH - For tractor models 4040, 4050, 4250, 4055, 4255. (Part No: R39512)
$61.96

Top Link - Complete Top Link. Eylet size is 3/4 inch at Bracket end, 1 inch at working end. Color is JD green. 21 Inch minimum and 30 Inch maximum reach. DOES NOT INCLUDE BRACKET. For tractor models 830, 840, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2020, 2030, 2040, 2040S, 2650, 2850, 3020. Replaces S-AL39170. (Part No: S.04261)
$44.78

Toplink Transfer Hook - S shaped hook. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4320, 4240, 4250, 4255, 4430, 4440, (4450 up to SN# 18905). (Part No: R53762)
$14.93

Hydraulic System
Hydraulic Lever Guide - 2 piece. For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320, 4520, 4620, 6030, 7020, 7520. Replaces R41760. (Part No: R41194)
$53.16

Hydraulic Pump Drive Coupler - For 3020, 4000, 4020, 5010, 5020. Hydraulic Pump Drive Coupler. (3068R) (Part No: R34359)
$93.07

Hydraulic Pump Seal & O-Ring Kit - 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Part No: RE29107)
$61.89

Hydraulic Pump Seal & O-Ring Kit - 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Part No: RE29103)
$61.89

Hydraulic Pump Stroke Control Valve - For tractor models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Part No: RE10712)
$40.84

Hydraulic Pump, New - 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Part No: AR94660)
$1688.11

Lower Lift Housing - For 3010, 3020, 4010, 4020 (To S#200999) (Part No: R3118)
$113.86

Rockshaft - For tractor models (2520 Row Crop), (3020 SN# 123000 and up), (4000, 4020 SN# 201000 and up Row crop and Standard), 4030, 4040, 4230, 4320, 4430. (Part No: R56175)
$199.84

Selective Control Valve - Return & pressure valve. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2355, 2440, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2955, 3020, 3055, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630. Replaces AR78396. (Part No: AR86535)
$31.25

Upper Lift Housing - For tractor models 3010, 3020, 4010, 4020 (To S#200999). (Part No: R3885)
$125.24

Lights
12 Volt Bulb - This bulb allows you to use the AR77326 work light for 12 volt applications. (Part No: S.51140)
$3.98

Dash Light - 12 Volt - For tractor models 50 up to SN# 5016122, 60 to SN# 6017060, 70 Highcrop to SN# 706327, 520 to SN# 5208099, 1010, 2010, 2510, 3010, 3020 to SN# 122999, 4010, 4020 to SN# 200999, 5010, 5020, 6030, 8020. (Part No: AD2835R-12V)
$18.71

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt sealed beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898 (Part No: 373662R91)
$8.39

Light Clamp - For tractor models M, MC, MT, 40, 320, 330, 420, 430, 435, (2010 crawler), 3010, 3020, MI. (Part No: M1482T)
$6.90

Light Mounting Bracket - Bracket Clamp sold seperately as Part # R27460 - 2 clamps required per bracket. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. Replaces: TI9178, TI2443 (Part No: T12443)
$43.51

Light Mounting Clamp - Half Clamp for clamping mount part number T12443. 2 used per bracket. Price is for 1. For tractor models 820 3 cyl, 830 3 cyl, 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040 up to SN# 349999, 2240 up to SN# 349999, 2510, 2630 and also fits the following models with stolper cab: 3020, 4000, 4020, 4320, 4520, 5010, 5020, 6030. (Part No: R27460)
$10.99

Light Switch Knob - Use with AR48724 light switch. For tractor models (2520, 2750 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4030, 4230, 4320, (4520 from SN# 142450 and up), 4620, 4630, (5020 with cab). Replaces AR54445. (Part No: R46092)
$23.42

Light Switch, 4 Position - 8 terminal, uses AT65316 knob. For tractor models (3010 diesel), (3020 diesel SN# 67999-122999), (4010 diesel), (4020 diesel SN# 65000-90000), (5010 up to SN# 4499), 8020. (Part No: AR28402)
$31.50

Light Switch, 4 position - 6 terminal, uses knob R46092. For tractor models (2350 with sound guard cab), (2520 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4320, (4520 from SN# 142450 and up), (5020, 6030 with cab), 7020, 7520, (2355, 2550, 2555, 2750, 2755, 2855, 2840, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 all with sound guard cab), 4620, 4640. (Part No: AR48724)
$27.56

Light Switch, 6 Volt - 4 position, 9 terminal, .50 inch thread dia. For tractor models 2510, (2520 SN# up to 022000), (3020 SN# 068000 to 150000), (4000, 4020 SN# up to 250000 and up), (4520 early), (5010 SN# 008000 and up), 5020, (6030 without cab), (410B SN# up to 711602), 500C, 510, (510B SN# up to 711568), (610B, 710B SN# up to 711715), (600 SN# 91000 to 200999), 700A, 760A. Replaces R39551, AT21792. Knob not included. (Part No: AR41288)
$23.47

Red Light with Brass Ring - For tractor models A, B, G, R, 40, 320, 420, 430, 50, 60, 70, 80, 520, 530, 620, 720, 730, 82, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. (Part No: AA925R)
$6.50

Work Tail Light - 2 wire connectors. 6 Volt. For tractor models 50, 60, 70, 80, 520, 530, 620, 720, 730, 820, 930, 1020, 2020, 2030, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855, 2940, 2955, 3010, 3020, 4010, 4020, 4320, 4520, 4620. If you have a 12 volt application, order bulb # S.51140 for an additional cost. (Part No: AR77326)
$51.67

Miscellaneous
Frame Rail, LH - For tractor models 3010, 3020. OEM# AR65369. (Part No: R3871)
$288.14

Frame Rail, RH - For tractor models 3010, 3020. OEM# AR65368. (Part No: R3872)
$288.14

Hammer Strap - Offset For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630 (Part No: R3102)
$150.47

Hammer Strap - Straight. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430, 4455, 4630. (Part No: R3103)
$89.46

Knee Extension - With Bushings - 18 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Part No: R3058)
$305.26

Knee Extension - With Bushings - 24 Long For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 (Part No: R3059)
$390.38

Oil System
Oil Filter - Oil filter element, cartridge type 6-7/16" Tall, 3-1/8" Wide. For tractors: A, B, D, G, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 3010, 3020, 4000, 4010, 4020, 4030 (Part No: AR26350)
$4.58

Oil Line, Rear LH, Inner - Dual selective control. For model 3020 SN# up to 122999 powershift row crop and standard. (Part No: AR32393)
$130.58

Oil Line, Rear LH, Inner - Dual selective control. For model 3020 SN# up to 122999 syncro row crop and standard. (Part No: AR32588)
$117.89

Oil Line, Rear LH, Outer - Dual selective control. For model 3020 up to SN# 122999 powershift row crop or standard. (Part No: AR32394)
$129.49

Oil Line, Rear LH, Outer - Dual selective control. For model 3020 SN# up to 122999 syncro row crop and standard. (Part No: AR32589)
$115.02

Oil Line, Rear RH, Inner - For model 3020 up to SN# 122999 syncro Row crop and Std. (Part No: AR32587)
$115.42

Oil Line, Rear RH, Outer - For model 3020 up to SN# 122999 syncro row crop and standard. (Part No: AR32586)
$96.94

Oil Pressure Sending Unit - For tractor models 1010, 1020, 1520, 1530, 2010 SN# 42001 and up, 2020, 2030, 2040, 2150, 2250, 2155, 2355, 2240, 2350, 2550, 2355, 2555, 2440, 2510, 2520, 2630, 2640, 2750, 2755, 2855, 2840, 2940, 2950, 2955, 3010, 3020, 3055, 3255, 3155, 4000, 4010, 4020, 4320, 4520, 4620, 5010, 5020, 6030, 7020, 720, 730, 820, 830, 840, 8440, 8640, 8630. (Part No: AR27977)
$9.60

Oil Pump Drive Gear - Late style without keyway. FOr Models: 3010, 3020, 500, 500A, 500B, 500C, 4000, 4020, 4010, 600, JD600, JD500, JD500A, JD500B, 6600, 7700. (Part No: R45134)
$223.96

PTO / Driveline
Bearing Race - Replaces JD10283. Inside diameter is 1.181", outside diameter 1.602", width is .748". For tractor models 3120, 300, 301, 400, 401, 500, 600, 1020, 1120, 1520, 2020, 2030, 2120, 2140, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450 and 4455 (Part No: JD7557)
$11.14

PTO Shaft - The new 1000 RPM PTO shaft is 10.875" long with 21 Splines. Fits John Deere 2510, (3020 Up to Serial Number 122998), (4020 Up to Serial Number 200998). Replaces R33342 (Part No: R33342)
$132.69

PTO Shaft - 1000 RPM - 21 Splines 10.875 Long For tractor models 2510, 2520, 2840, 3020 (From S#123000), 4000, 4020 (From S#201000), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Replaces OEM R38224 (Part No: R3088)
$111.63

PTO Shield - For 2510, 2520, 3020, 4000, 4020, 4030, 4230, 4320, 4430, 4455. PTO Shield. (Part No: R33348)
$35.44

Shaft, PTO (540 RPM) - This is a 540 RPM shaft to replace 1000 RPM standard shaft. Fits tractor models 500A (IND), 500B (IND), 500C (IND), 600 (SN 201000>), 2510, 2520, 3020 (SN 123000>), 4000, 4020 (SN 201000>), 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455. Dimensions: 11.840" long, 6-spline. (Part No: R38224SP)
$157.35

Shaft, PTO (540 RPM) - Does not include JD7557 Bearing Race. Fits 500, 500A, 600, 2510, 3020 (SN <-122999), 4020 (SN <-200999). Dimensions: 10.687" long, 6-spline. (Part No: AR41753)
$153.36

Seats
Seat Assembly - Black Vinyl on Steel. For tractor models 1010, 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4555, 4620, 4630, 4755, 5010, 5020, 6030, 7020, 7520. Features flip up arms. (Part No: R1143)
$374.90

Seat Assembly - Black Fabric on Steel. For tractor models 1010, 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4555, 4620, 4630, 4755, 5010, 5020, 6030, 7020, 7520. Features flip up arms. (Part No: R1144)
$468.63

Seat Assembly - Yellow Vinyl on Steel. For tractor models 1010, 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 4430, 4520, 4555, 4620, 4630, 4755, 5010, 5020, 6030, 7020, 7520. Features flip-up arms. (Part No: R1145)
$374.90

Seat Back - Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0183)
$132.14

Seat Back - Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0189)
$162.37

Seat Back - Brown Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0192)
$132.14

Seat Back - Black Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0195)
$94.86

Seat Back - Black Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0976)
$132.14

Seat Bottom - Yellow Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0182)
$125.45

Seat Bottom - Brown Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0188)
$125.45

Seat Bottom - Brown Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0191)
$125.45

Seat Bottom - Black Fabric on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0194)
$94.86

Seat Bottom - Black Vinyl on Steel For 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020 (Part No: R0975)
$125.45

Seat Cushion Set - Yellow Leatherette upholstery seat cushion set. Includes seat, lower and upper backrests. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4030, 4040, 4230, 4320, 4340, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 95, 105, 4400, 6600. (Part No: JD5678)
$136.00

Seat Upper Back - Yellow Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0184)
$70.26

Seat Upper Back - Brown Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0190)
$70.26

Seat Upper Back - Brown Fabric on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0193)
$70.26

Seat Upper Back - Black Fabric on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0196)
$40.89

Seat Upper Back - Black Vinyl on Steel. For tractor models 2010, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4430, 4520, 4620, 4630, 5010, 5020, 6030, 7020. (Part No: R0977)
$70.26

Sheet Metal / Body Parts
Battery Box - Left - This left side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Replaces AR20210, AR26617, AR34819, AR40208, AR40674. Battery box comes primed. (Part No: JTBL-1WB)
$74.66

Battery Box - Right - This right side battery box comes WITH BRACKETS. Includes box mounting brackets, does NOT include frame brackets. Fits models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620. Battery box comes primed. Replaces Replaces: AR10209, AR26618, AR34185, AR40207, AR40673. (Part No: JTBR-2WB)
$74.66

Battery Box, LH - For tractor models 2510, (3020 Row crop/hi-crop SN# 050000 and up, standard 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AR40208)
$87.33

Battery Box, LH - For tractor models 2520, (3020 SN# 123000 and up), (4000 Row crop SN# 201000 and up), (4020 Row crop SN# 201000 and up), 4320. All less cab and JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AR40674)
$80.37

Battery Box, RH - For tractor models 2510, (3020 Row crop/hi-crop SN# 050000 and up, standard SN# 050000-067999), JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AR40207)
$87.33

Battery Box, RH - For tractor models 2520, (3020 SN# 123000 and up), (4000 Row crop SN# 201000 and up), (4020 Row crop SN# 201000 and up), 4320, 4520, 4620. All less cab and JD500A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AR40673)
$80.37

Battery Hold Down - For tractor models: (3010, 4010 standard), (3020, 4020 Row-Crop with Cab & Standard), 4000, (4320, 4520, 4620 Row-Crop with Cab). (Part No: AR26469)
$40.16

Fender Bracket - For 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 4620, 5020, 6030, 8430, 8440, 8450, 8460, 8630, 8640, 8650. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R70588)
$135.93

Fender U-Bolt - This Fender U-Bolt is used on John Deere (2010 Rowcrop Utility; SN: 42001 & up), 2010 Rowcrop, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. It Replaces original part number R26992 (Part No: R26992)
$18.75

Fender, Flat Top, LH With Hand Hole - For Row-Crop Models, Left-Hand Fender for: 530, 630, 730, 2010, 2030, 2155, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320, Row Crop Models with Flat Top Fenders. Also replaces AR48873. Rubber Hand Hole Grommets available as #R2468. Note in comments section of order form to include Hand Grommet(s). ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE **. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: RE13879)
$198.65

Fender, Flat Top, RH - Fender right hand, for row crop tractors less cab & sound guard body. Tractors: 530, 630 gp (SN# 6300000 & up), 730G&D GP (SN# 7300000 & up), 2010, 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2940, 2950, 2955, 3010, 3020, 4000, 4010, 4020, 4320. For tractors with tire sizes 13.6 x 38, 15.5 x 38, 16.9 x 30, 18.4 x 30, 18.4 x 34. Tractors: 2350, 2550, 2750. Replaces AR20869, AR20870, AR48872, AR48873. *Use fender grip R20759. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE **. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: RE13878)
$198.65

Front Grill Screen - For 3010, 3020. Replaces OEM# AR26494. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0176)
$70.31

Hood - Has round muffler hole and no air intake hole. For tractor models 3010, (3020 up to SN# 122999). Note: Must ship truck freight due to size and weight additional shipping of $100 will be added. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R6342)
$930.24

Hood - Has round muffler hole and air intake hole. For tractor models 3010, (3020 up to SN# 122999). Note: Must ship truck freight due to size and weight additional shipping of $100 will be added. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R6343)
$930.24

Hood - Has oval muffler hole and no air intake hole. Hood is 1 piece, right picture is partial picture of hood showing just the end. For model 3020 from SN# 123000 and up. Note: Must ship truck freight due to size and weight additional shipping of $100 will be added. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R6344)
$930.24

Hood - Has oval muffler hole and air intake hole. For model 3020 from SN# 123000 and up. Note: Must ship truck freight due to size and weight additional shipping of $100 will be added. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R6345)
$930.24

Platform - Does NOT have dimmer switch hole. For tractor models 2520, (3020 row crop and high crop from SN# 123000 and above), (4000 row crop and high crop from SN# 201000 and above), (4010 row crop from SN# 001000 and above & Standard From SN# 020200 and above), (4020 row crop and high crop from SN# 201000 and above & syncro range from SN# 065000 to 090999), (4320 row crop). Replaces AR40672, AR48004. (Part No: AR48727)
$276.41

Rear Side Shield - Left Hand For 3010, 3020 (To S#122999). Shield comes with Pins, Clips and Springs. Replaces OEM# AR26851. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0456)
$57.60

Rear Side Shield - Right Hand For 3010, 3020 (To S#122999). Shield comes with Pins, Clips and Springs. Replaces OEM# AR26850. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0457)
$57.60

Rear Side Shield - Left Hand For 3020 (From S#123000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R1536)
$57.95

Rear Side Shield - Right Hand For 3020 (From S#123000). Shield comes with Pins, Clips and Springs. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R1537)
$57.95

Rockshaft Cover, LH - With tool box. For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: AR40817)
$177.19

Rockshaft Cover, RH - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: AR41599)
$120.49

Rockshaft Support - For tractor models 2520, (3020 from SN# 123000 and up), 4000, (4020 from SN# 201000 and up), 4320. (Part No: R41231)
$49.61

Side Panel, Front, Left - For tractor models 3010, 3020. (Part No: AR26498)
$106.31

Side Panel, Front, Right - For tractor models 3010, 3020. (Part No: AR26497)
$106.31

Side Screen - 19 x 18 For 3010, 3020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0168)
$63.71

Side grill panel - Side grill panel, for tractors: 3010, 3020, two(2) used per tractor. For 3010, 3020. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: TP-AR26849)
$120.61

Step Pad - For tractor models 1020, 1120, 1520, 1530, 1830, 2010, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 3010, 3020, 4000, 4010, 4020, 4050, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4520, 4620, 50, 5010, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, 80, 8020, 820, 830, 8450, 8650, 8850, 920, A, B, G (Part No: F3195R)
$31.36

Tractor Step - For tractor models JD500A, JD600, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R27883)
$33.60

Steering
Axle Center Tube - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Replaces original part number AR50865 $100 will be added for shipping due to size/weight of part. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R0009)
$1146.32

Complete Wide Axle Assembly - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly. Includes all framing, tie rod and spindles. CALL FOR SHIPPING QUOTE. Truck delivery, 450 lbs. (Part No: AR44331)
$1830.71

Complete Wide Axle Assembly, Heavy Duty - For 2510, 2520, 3010, 3020, 400, 4010, 4020, 4320. Complete Wide Axle Assembly - HEAVY DUTY. Includes all framing, tie rod and spindles. CALL FOR SHIPPING QUOTE. Truck delivery, 465 lbs. (Part No: AR44331H)
$1870.13

Front Axle Assembly, Wide, Heavy Duty - For 3010, 3020, 4000, 4020. Includes 6 bolt hubs with 6" bolt circle and 4.62" pilot diameter hole, bearings and seals are also included. Heavy Duty Front Axle with hubs and mounting parts. Width on wide axles are adjustable from 60" to 86". Additional $100 added to shipping due to the weight of this item 320 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 24450)
$1475.85

Front Axle Assembly, Wide, Heavy Duty, without hubs - For JD 3010, 3020, 4000, 4010, 4020. Schwartz Complete Axles and mounting Parts WITHOUT HUBS. These Heavy Duty Models do not include hubs and bearings. Use original hubs and bearings from narrow front axle. The Heavy Duty Models are especially adaptable for use with flotation tires. Width on wide axles are adjustable from 60" to 86". Additional $ 100 shipping due to the weight of this item 300 lbs. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 22770)
$1464.73

Front Axle Housing with Bushings - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Front Axle Housing with Bushings. Used on AR44331 and AR44331H wide front ends. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: AR50865)
$1218.84

Knee Assembly, Heavy Duty. - Knee Assembly, Heavy Duty. Includes spindle, Knee, inner bearing cone, and thrust washers. For JD 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors (Part No: AR44333)
$409.47

Knee, Heavy Duty - A= 3.250", B= 18.00", C= 12.750". For Used on heavy duty front axle AR44331H. Models: (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 all with heavy duty knee). (Part No: AR44333KN)
$350.42

Long Knee Extension - Long Knee Extension. For Extra Wide Rows. Dimensions A-3.250 inch B-24.000 C-12.750 inch For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. (Part No: AR50963)
$384.65

Pivot Bolster - Use R3064 Pin. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320. Additional $75 shipping will be added to your order due to weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R3063)
$642.50

Pivot Pin - Used front & rear, 4.375" long, 1.500" dia. For tractor models 2510, 2520, 3010, 3020, 4000, 4020, 4230, 4320, 9900. (Part No: R27817)
$37.69

Pivot Plate - For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. Pivot plate with caps & bolts. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: AR69836)
$563.45

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Part No: R34348)
$81.48

Power Steering Pump Shaft - Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Part No: R79152)
$134.19

Spindle - Spindle, LH/RH. Dimension A-10.750 inch B-1.50 C-1.687 D-1.312 For 4000, 4230, ALL Low Profile. 3010, 3020, All Row Crop Utilities. (Part No: AR50983)
$234.81

Spindle - Spindle, LH/RH. Dimensions A-27.375 inch, B-1.50 inch, C-1.687 inch, D-1.312 inch. For 2510, 3020, 4000, 4010, 4020, All Hi-Crop, 2520 Hi-Crop SN# 21001-> (Part No: AR50981)
$270.12

Spindle, Heavy Duty - Spindle, Heavy Duty. Dimensions A-15.125 inch B-1.750 inch C-1.795 inch D-1.312 inch For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320 tractors. All with Heavy Duty Spindle. (Part No: AR44333SP)
$240.20

Spindle, RH/LH - A= 15.125", B= 1.500", C= 1.687", D= 1.312". For tractor models (2510, 3010, 3020, 4000, 4010, 4020, 4320 all row crop front axle), (2520 SN# 022001 and up row crop), 9900 cotton picker. (Part No: AR55180)
$185.39

Splindle, RH/LH - Spindle, LH/RH. Dimensions A-12.750 inch B-1.50 inch C-1.687 inch D-1.312 inch. Fits 3010, 3020, 4000, 4010, 4020 All with Standard non-adj. front axle. (Part No: AR55179)
$182.09

Steering Arm, Center - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 9900. (Part No: R27808)
$134.99

Steering Arm, LH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Part No: R47766)
$57.12

Steering Arm, RH - 1.50" diameter, 6 spline. For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320, 9900. (Part No: R47765)
$57.12

Steering Wheel - Steering wheel, 16 1/2 diameter, 7/8" splined hub, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 & up, 4000, 4020 serial number 201000 & up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Part No: T22875)
$37.50

Steering Wheel - 16" diameter, 7/8" splined hub, smooth finish, like original. For tractor models 1010, 2010, 2510, 3010, (3020 up to SN# 122999), 4010, (4020 up to SN# 200999), 4520, 4620, 5010, 5020, 6030, 7030, 7520. (Part No: AR26625)
$54.51

Steering Wheel Cap, Black Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: R26673)
$32.76

Steering Wheel Cap, White Face - For tractor models: 1020, (820 3-cyl), 1520, 2020, 2510, 2520, 3020, 4000, 4020, 4320, 4520, 4620, 5020 all with power steering. (Part No: JDS338)
$60.38

Steering Wheel Nut - This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.075 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Part No: 353435X1)
$0.44

Tie Rod - Tie rod end, outer threaded, Left hand threads, 3-7/8 to center of post. For fixed front axles on tractors 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320. For 1020, 1520, 2030, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: TP-AR27430)
$32.71

Tie Rod Assembly - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. Tie Rod Assembly. HAS 11.5 INCH LENGTH ON INNER TIE ROD TUBE. (Part No: AR44332)
$118.78

Tie Rod Assembly - For tractor models 4320, (2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230 all with 88" Wide Tread). Complete Tie Rod Assembly. HAS 15.5 INCH LENGTH ON INNER TIE ROD TUBE. (Part No: AR44334)
$97.63

Tie Rod End - Tie rod end, outer, 7/8-18 threaded, right handed threads, 3-3/8 to center of post. For adjustable front axles 48 to 80 on tractors 520, 530, 620, 630, 720, 730. Fixed standard axles on tractors, 620, 630, 720, 730~ 820 and 830 except Mannheim. Also used on 1020, 1520, 2030, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230. (Part No: TP-AR27351)
$24.91

Tie Rod End - For tractor models 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320. (Part No: TP-AR51584)
$40.28

Tie Rod Inner Tube - 15.50 Long 1.00 diameter with 10 Holes For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 with 88 Tread Axle (Part No: R3830)
$102.19

Tie Rod Outer Tube - 12.375 Long .875 diameter with Internal Threads For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: R3042)
$38.12

Tie Rod Tube - Tie rod end, outer, drilled, 12.375 inches long, 2 holes, threaded on one end. For adjustable front axles on tractors: 2510, 2520, 3010, 3020, 4000*, 4010, 4020*, 4230 low profile, 4320*. Replaces AR 27350. *Also fits above models with power drive front axles. For 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4230, 4320 (Part No: R28021)
$41.62

Wheels
Bearing Cone - Outer bearing cone. For tractor models 50, 60, 70, 520 with 48-80 adjustable or 38 fixed thread~ 620, 630, 720 and 730 excluding roll-o-matic, 3010 and 3020 with 38 fixed thread, 4010 with 38 fixed thread. For 3010, 3020, 4010, 50, 520, 60 (Part No: 2790)
$15.21

Bearing Cone - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 3383)
$46.40

Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: M88048)
$13.93

Bearing Cone - Inner bearing cone. For model applications: A series excluding AN, BW, D, G series~ 50~ 60~ 70. For 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G (Part No: TP-JD7224)
$43.93

Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: JD8913)
$19.50

Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 5010. (Part No: TP-JD8929)
$13.93

Bearing Cone - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. (Part No: 25577)
$17.23

Bearing Cup - For tractor models 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: 3320-TIM)
$17.50

Bearing Cup - Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Part No: TP-JD7266)
$6.71

Bearing Cup, Inner - For tractor models A series excluding AN, BW, D, G series~ 50~ 60~ 70, 3010, 3020, 4010, 50, 520, 60, 620, 630, 70, 720, 730, A, BW, D, G. (Part No: TP-JD7270)
$17.50

Bearing Cup, Rear Wheel - For tractor models 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430, 5010. (Part No: TP-JD7445)
$7.41

Front Wheel Bearing Kit - Wheel bearing kit. For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4430. Kit Contains: 25521(Cup), 25577(Cone), M88010(Cup), M88048(Cone), AR26480(Seal), R26632(Seal Retainer), A1556R(Axle Cap Gskt). Repairs one wheel. (Part No: FW157S)
$44.86

Front Wheel Nut & Bolt Set - For 1020, 1420, 1520, 1530, 1550, 1650, 1750, 180, 1850, 1950, 2020, 2030, 2150, 2155, 2255, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2840, 2855, 2955, 3010, 3020, 3055, 400, 4000, 4020, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 5244, 4320, 4430, 4440, 4450, 4455, M. Front Wheel Nut & Bolt Set of TEN 10. Bolts are 9/16 Inches x 1 1/2 inches. Zinc Plated Nuts. (Part No: WB916-bolt_nuts)
$42.75

Wheel Bearing Kit - For 1020, 1520, 2030, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4320. Wheel Bearing Kit for 1 wheel. Kit contains 1 each of the following p/n 25577(Cone), 25521(Cup), M88048(Cone), M88010(Cup), 23342(Seal), R26632(Seal Retainer). (Part No: WBKJD6)
$41.05

Wheel Hub - 6 Bolt For 1520 HD, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, 4430. This is a hub only. Uses wheel bearing kit WBKJD6 and hub cab A1555R. (Part No: R48763)
$62.60

Wheel Hub Cap - This wheel hub cap fits the following tractor models: 210C, 300, 300B, 300D, 301, 302, 302A, 310, 380, 400, 401, 401B, 401C, 480, 480A, 480B, 1020, 1030, 1120, 1130, 1520, 1520 HD, 1630, 1640, 1830, 2020, 2030, 2040, 2150, 2155, 2255, 2350, 2355, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4040, 4320, and 4430. Replaces part number A1555R. Fits hubs: T21545 and R48763. (Part No: A1555R)
$11.34

Wheel Hub, Front - 6 bolt. For tractor models (1520 HD front end), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4320, 4430. (Part No: TP-R48763)
$70.23



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL)
$33.61

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$95.23

Cooling System
Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153)
$60.71

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. It measures 1/4 of an inch and has an 18 NPT thread size. Please verify size and thread count before ordering. (Part No: C9NN8115A)
$1.94

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.49

Decals and Emblems
2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black & silver, vinyl cut. (Part No: R4697)
$9.77

2 Legged Deer Decal - John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black & yellow, vinyl cut. (Part No: R4696)
$9.77

2 Legged Deer Decal - John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black & yellow, vinyl cut (Part No: R4695)
$9.77

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: R5186)
$16.28

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: R5187)
$16.28

2 Legged Deer Decal - John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: R5188)
$27.24

2 Legged Deer Decal - John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: R5189)
$16.28

4 Legged Deer Decal - "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: R5184)
$33.52

4 Legged Deer Decal - Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: R5185)
$33.52

Loader Decal, Yellow - Universal John Deere loader decal, 2" x 24". (Part No: JDL2Y)
$15.58

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$9.69

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258)
$34.20

Alternator Top Adjusting Bracket, Universal - This Universal Top Adjusting Bracket For Alternator Or Generator is 7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole. (Part No: ABC529)
$11.93

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$68.93

Battery Hold Down - Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.09

Battery Hold Down Bolts - Pair - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$8.62

Battery Thermal Wrap - 60 Watt, 28 inch long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 80 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inch long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$27.71

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$6.94

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40611)
$45.15

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511)
$35.82

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111)
$43.25

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Part No: 40011)
$34.32

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501)
$40.25

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001)
$38.57

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$39.44

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001)
$44.38

Distributor Cap, Wico - For All models using Wico distributor, clip type cap. (Part No: AT14190)
$44.75

Magneto Cap, 2 Cylinder - For tractor models using WICO XH magneto ONLY. (Part No: 1006501)
$65.97

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$15.25

Solenoid, 6 Volt - 3 terminal, Delco starters 1107466, 1107474. (Part No: DR1465)
$5.99

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$2.73

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$2.73

Spark Plug - Standard tip, 7/8"-18 thread, 5/8" reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.63

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$12.75

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor II high performance electronic ignition conversion kits. (Part No: S.66442)
$11.98

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$13.59

Spark Plug Wire Set, Universal, 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)
$0.00

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.31

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.31

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$21.20

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.43

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75° F to +500° F, 3.35 oz. tube. (Part No: PRM77BR)
$5.99

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$9.11

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It’s useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$7.18

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055)
$31.79

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521)
$38.17

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560)
$68.34

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Muffler Clamp, 1-1/2" - New Clamp for 1-1/2" Outside Diameter Muffler Inlet (Part No: MC112)
$2.75

Muffler Clamp, 1-1/4" - New Clamp for 1-1/4" Outside Diameter Muffler Inlet (Part No: MC114)
$2.50

Muffler Clamp, 1-1/8" - New Clamp for 1-1/8" Outside Diameter Muffler Inlet. (Part No: MC118)
$2.50

Muffler Clamp, 1-3/4" - New Clamp for 1-3/4" Outside Diameter Muffler Inlet (Part No: MC134)
$2.75

Muffler Clamp, 1-3/8" - New Clamp for 1-3/8" Outside Diameter Muffler Inlet (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8" - New Clamp for 1-5/8" Outside Diameter Muffler Inlet (Part No: MC158)
$2.75

Muffler Clamp, 1-7/8" - New Clamp for 1-7/8" Outside Diameter Muffler Inlet (Part No: MC178)
$2.75

Muffler Clamp, 2" - New Clamp for 2" Outside Diameter Muffler Inlet (Part No: MC200)
$2.75

Muffler Clamp, 2-1/2" - New Clamp for 2-1/2" Outside Diameter Muffler Inlet (Part No: MC212)
$3.15

Muffler Clamp, 2-1/4" - New Clamp for 2-1/4" Outside Diameter Muffler Inlet (Part No: MC214)
$3.15

Muffler Clamp, 2-3/4" - New Clamp for 2-3/4" Outside Diameter Muffler Inlet (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8" - New Clamp for 2-3/8" Outside Diameter Muffler Inlet (Part No: MC238)
$4.50

Muffler Clamp, 3" - New Clamp for 3" Outside Diameter Muffler Inlet (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2" - New Clamp for 3-1/2" Outside Diameter Muffler Inlet (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3-1/4" Outside Diameter Muffler Inlet (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4" Outside Diameter Muffler Inlet (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2" - New Clamp for 4-1/2" Outside Diameter Muffler Inlet (Part No: MC412)
$7.98

Muffler Clamp, 5" - New Clamp for 5" Outside Diameter Muffler Inlet (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.32

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$6.30

Rain Cap - This rain cap is for a 2.250 inch pipe. (Part No: R1801)
$5.83

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$6.38

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.61

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$5.99

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$11.99

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$8.83

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$5.99

Fuel System / Air Intake
Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread dia. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4, outlet 1/4, O.D. 1-29/32, length 4-1/16. (Part No: 6511393)
$5.19

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8, outlet 3/8, O.D. 1-29/32, length 3-7/8. (Part No: BF836)
$6.72

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840)
$3.00

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840)
$3.00

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16, outlet 5/16, O.D. 2-1/8, length 3-21/32. (Part No: BF7736)
$2.28

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$32.26

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$75.20

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3/8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.03

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494)
$6.39

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$10.67

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8" diameter, 2.150" O.D., Made in the USA. (Part No: C1778R)
$2.49

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$13.00

Gaskets
Gasket Material, Cork Rubber - 3/32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332)
$10.84

Gasket Material, Cork Rubber - 1/16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116)
$13.81

Gasket Material, Exhaust Manifold - 1/16" thick x 12" wide x 28-1/2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$17.72

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.72

Gauges
Hourmeter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1/4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771)
$46.19

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 x 6 ft. copper oil line. Includes 6 Ft 1/8 Line, 2 x 5/16 -24 UNF Nuts, 2x Compression sleeves, and a 1/8-27 NPTF Female to 5/16-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/8" tube. Brass. (Part No: 919095)
$13.27

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/4" tube. Brass. (Part No: IHS626)
$12.72

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$25.52

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$19.50

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$13.66

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$12.05

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X)
$55.09

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4STUD THREAD, 2-1/2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85