(800) 853-2651   Cart  View Cart    
Low Prices, Fast Shipping

 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 5000 Parts Catalog

[ Show Pictures ]

[Show Categories]   [Show all Ford Models]   [Printer Friendly]  


Brakes
Actuator Rod Seal - For models 4000, 5000, 7000, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2810, 2910, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830, 5030, (5640, 6640, 7740, 7840, 8240, 8340 with 8x2 or 16x4 trans), 250C, 260C, 335, 340, 340A, 340B. Replaces E7NN2N336A, 85999093. (Part No: C5NN2N336A) $6.90

Brake Actuator Rod - For models (5000 5/1968 and up), 7000, (5900 up to 4/1989), 5600, 6600, 6700, 7600, 7700, (5610, 6610, 6710, 6810, 7610, 7710 up to 4/1989), (7810 less cab), 7910, 8210. (Part No: C7NN2466B) $23.61

Brake Band - Brake band, for PTO drive clutch. For models 5000, 5110, 5600, 5610, 5700, 5910, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710. (Part No: E0NNB726AB) $28.86

Brake Cross Shaft Bushing - O.D. 1 1/4", I.D. 1 1/8" , Length 1". Fits: 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 6610, 6710, 7610, 7710, 7810, 7910, 8010, 8210, 3230, 3930, 4130, 4630, 4830, 5030, 5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110. INDUSTRIALS: 230A, 231, 234, 250C, 260C, 2110LCG, 334, 335, 340A, 345C, 3400, 3500, 3550, 420, 445, 450, 4400, 4500, 530A, 531, 532, 535, 540, 545, 550, 555, 5500, 650, 655, 6500, 750, 755, 7500 (Part No: C5NN2N477A) $4.70

Brake Rod Seal - For models (750, 6600, 6700, 7500, 7600, 7700 from 1975-1980), 5000, 5610S, (6610, 6710, 7610, 7710, 7910 from 1981), (7100 from 1965-1975), 6610S, 6810S, 7610S, TV140, TV145, TV6070. (Part No: 86576339) $4.48

PTO Brake Arm - For models 5000, 7000, 5600, 6600, 6700, 7600, 7700, 5610, 6610, 7610, 7710, 7810, 7910, 8210, 7740, 7840, 8240, 8340, 8670. (Part No: C9NNN747B) $28.77

Spring - Spring, rear wheel brake disc return. Tractors: 3550, 4000 (except 4110), 5000, 7000 (1965-1975), 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 420, 515, 532, 535 (1975-1981), 2810, 2910, 3910, 4110, 4610, 5610, 5900, 6610, 6710, 7610, 7710, 7810, 7910, 8210 (1981-10/1991), 3230, 3430, 3930, 4130, 4630 (3/1990 & up), 5640, 6640, 7740, 7840, 8330 (with mechanical brakes) (11/1991 & up), 5610S, 6610S, 7610S, 7810S (1/1994 & up). (Part No: C5NN2N320A) $3.10

Clutch
Clutch Bearing - Clutch release bearing. I.D. 2.4997", O.D. 4.0700", W. 0.8700". For models 2000, 3000, 4000, 4110, 5000. (Part No: D8NN7580BB) $21.90

Clutch Bearing - Bearing, for PTO drive plate. I.D. 1.4370", O.D. 2.6772", W. 0.5906". For models 5000, 7000, 8000. (Part No: F0NNN779AA) $21.96

Clutch Cover Assembly - Pressure plate assembly, 12" single clutch. For models 5000, 5600, 5610, 5700, 6600, 6610, 6700. (Part No: E0NN7563CA) $139.90

Clutch Disc - Clutch disc, 12", 25-spline, 1 -5/8" hub, woven facing. For 5000, 5600, 5700, 6600, 6700 (Part No: E3NN7550EA) $79.47

Clutch Disc - Clutch disc, 12", 10-spline, 1-3/4" hub. For 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710 (Part No: E7NN7550DA) $77.90

Clutch Disc - Clutch disc, 13" heavy-duty clutch, 25-spline, 1-5/8" hub. For 5000, 5100, 5200, 6600, 6700, 7000, 7100, 7200 (Part No: E8NN7550KA) $130.87

Clutch Disc - 13", 25 spline, 1-5/8" hub, Rigid woven disc. Tractors: 5000, 5200, 5340 (1/65-9/69) Less dual power, 5700 (1/75-) Less dual power, 6600, 6700 (10/75-10/81) Less dual power, 7000, 7100, 7600, 7700 (10/71-9/75) Less dual power. Replaces D2NN7550A. (Part No: 3919288) $139.90

Clutch Disc - 13", 10 spline, 1-3/4" hub, Rigid woven disc. Tractors: 5000 (1/65-9/69) Dual power, 5110 (1/81-12/92) Dual power, 5200, 5340 (1/65-9/69) Dual power, 5640 (11/91-), 5700 (1/75-) Dual power, 6410 (1/81-12/92), 6600, 6700 (10/75-10/81) Dual power, 6610 (1/81-) Dual power, 6640 (11/91-), 6710 (1/81-) Dual power, 7000 (10/71-9/75) Dual power, 7100, 7200 (10/71-9/75) Dual power, 7600, 7700 (10/71-9/75) Dual power, 8010, 8210 (4/96-), TS90, TS100, TS110 (11/97-). (Part No: 82011594) $78.98

Clutch Kit - Single clutch kit assembly. NEW 13 inch PP with 2.5 inch hub. Includes 13 inch clutch disc, 1.492 hub, 25 Spline Rigid Drive Disc, New Release & Pilot Bearings with clutch alignment tool. Fits Tractors 4600, 4600NO, 4600SU, 5000, 5100, 5190, 5200, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6600C, 6610, 6610S, 6700, 6810S, 7000, 7010, 7100, 7200, 7600, 7600C, 7610, 7610O, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210, 9610. (Part No: FD13P25RD) $270.84

Clutch Kit - Complete kit includes Pressure Plate, 13 inch 10 Spline Rigid Disc, Pilot Bearing, Release Bearing and Alignment Tool. For models 4600, 4600SU, 5000, 5110, 5190, 5340, 5600, 5610, 5610S, 5700, 6410, 6600, 6610, 6610S, 6700, 6710, 6810, 6810S, 7000, 7010, 7600, 7610, 7610S, 7700, 7710, 7810, 7810S, 7910, 8010, 8210 (Part No: D8NN7563AB-KIT) $219.90

Clutch Kit, 10 SPLINE DISC - Kit Includes 12 inch, 10 spline rigid disc, pressure plate, release bearing and alignment tool. FOR MODELS: 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700 (Part No: E0NN7550DA) $197.90

Clutch Kit, 25 SPLINE DISC - Complete kit includes 12 inch, 25 spline RIGID disc, cover plate, release bearing, pilot bearing, and alignment tool. For models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700 (Part No: E0NN7563CA-KITA) $198.90

Clutch Kit, 25 SPLINE DISC - Complete Kit contains 12" 25 spline SPRING drive disc, 12" single pressure plate, pilot and release bearings, includes pilot tool. For models 4600, 4600SU, 5000, 5190, 5340, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7700. (Part No: E7NN7550DA-KIT) $209.90

Clutch Release Bearing Hub - For models 5000, 5600, 5700, 6600, 6700 all with single clutch. (Part No: C5NN7571H) $27.83

Clutch Shaft Bushing - 1.80" long, 1.231" O.C, 1.062" I.D. For models 2000, 2100, 2600, 3000, 3100, 335, 340, 3400, 3500, 3550, 3600, 4100, 420, 4200, 4400, 4410, 445, 4500, 4610, 5000, 5100, 5200, 535, 540, 545, 550, 555, 5600, 6600, 6700, 7100, 7200, 7600, 7700, 8000, 8700, 9000, 9700, TW10, TW20, TW30. (Part No: C5NN7A615A) $8.99

Cover Assembly - Pressure plate assembly, 11" single clutch. For models 2000, 233, 2600, 3000, 321, 3600, 5000. (Part No: D0NN7563A) $235.59

Friction Plate, Select-O-Speed #2 or #3 - For models 4000, 4100, 4140, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 6000, 7000, 7100, 7200, 8000, 8200, 8400, 8600, 8700, 9000, 9200, 9600, 9700. (Part No: C0NN7B455A) $50.01

Pressure Plate - 12" plate. For models 3000, 4000, 5000, 5600, 5610, 5900, 6600, 6610, 6700, 6710, 7600, 7700. (Part No: C5NN7566A) $116.78

Pressure Plate Assembly, 13 - 13" single clutch. For models 5000, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D8NN7563AB) $139.90

Trans. Disc, 12 - Organic, rigid disc, 1.625" spline dia., 25 spline. Replaces E3NN7550EA. For models 5000, 5100, 5200, 5600, 5610, 5700, 6500, 6600, 6610, 6700, 6710, 7610, 7710, 7910, 8210. (Part No: F0NN7550HA) $58.31

Trans. Disc, 13 - Spring loaded, Organic, 1.750" spline dia., 10 spline. For models 4830, 4830N, 5000, 5100, 5110, 5200, 5550, 5600, 5610, 5640, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7100, 7200, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8100, 8210, TS100, TS80, TS90. (Part No: 82011593) $78.85

Cooling System
Fan Belt - Belt, drive for fan and water pump, 54 long. For models 2000, 3000, 4000, 5000. (Part No: D4NN10C318A) $16.44

Fan Belt - Fits: 2000, 3000, 4000, 5000. Industrials: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Some of these tractors used more than one type of belt, Verify part number before ordering. (Part No: C9NN10C318B) $12.82

Fan Blade - 8 Blade - For 3 and 4 Cylinder 1965 and up: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5600, 5610, 6000, 6600, 6610, 6700, 6710, 7000, 7600. 8 Blade, Blue PLASTIC 5/8" pilot hole, 4 bolt with 2 1/2 inch center to center on opposite holes, 14 Inch Outside Diameter. (Part No: S.60579) $26.94

Housing - Housing, water outlet connection. For 2000, 231, 233, 2600, 3000, 333, 335, 3600, 3900, 4000, 4100, 420, 4600, 5000, 515, 531, 532, 535, 5600, 5700, 6600, 6700, 7000, 7600, 7700 (Part No: C7NN8594B) $16.82

Radiator - For the following tractors without oil cooler: 4100 or 4600 (Diesels with cab & AC 1977>), 4500, 5000 (1965 to 1975); 5600, 6600 (1975 to 1981); 535 (1975 to 1978). Industrials: 340 (< 9/1985), 445 (without torque converter 10/78 - 9/86). Replaces D6NN8005B, C5NN8005N, 83918041, 83916894, 83916415. Measures Core Size: 17.500" Wide, 17.750" High, 3 Rows of Tubes. (Part No: 86531508) $281.32

Radiator Cap - 13 PSI RADIATOR CAP (FOR 2000, 3000, 4000, 5000, 70001965 TO 1975), (2600, 3600, 4100 4600, 5600, 5700, 6600, 6700, 7600, 7700 1975 TO 1981), (2610, 3610, 4110, 4610, 5610 6610, 7610, 7710 1981 and up). REPLACES D2AE8100A1A. (Part No: E2NN8100BA) $9.04

Radiator Hose, Bottom - I.D. 1.725". Fits GAS & DIESEL: 2000 (3 CYL), 2600, 3000, 3055, 3100, 335, 340, 3400, 3500, 3600, 3610, 4100, 4110, 4140, 420. FITS GAS ONLY: 4000, 445, 5000, 540, 545, 5600, 6600, 7000, 7700. (Part No: C5NN8286B) $9.42

Radiator Hose, Lower - Hose, radiator lower. For models 2600, 3600, 4100, 4600, 5000, 5600, 6600, 7600. (Part No: C5NN8286C) $12.50

Radiator Hose, Upper - Hose I.D. 1.5 inch. FITS: 2000 (3 CYL. DIESEL), 2600, 2610, 3000, 3000 DIESEL, 3055 DIESEL, 3100 DIESEL, 335, 335 DIESEL, 340, 340 DIESEL, 3400 DIESEL, 3500 DIESEL, 3600, 3600 DIESEL, 3610, 3610 DIESEL, 4000, 4100, 4100 DIESEL, 4110, 4110 DIESEL, 4140 DIESEL, 420 DIESEL, 445 DIESEL, 450 DIESEL, 4600, 4600 DIESEL, 4610, 4610 DIESEL, 5000, 540, 545, 550, 555, 5600, 5610, 5900, 6500, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D5NN8260D) $4.29

Radiator Mounting Pads - Price is for a package of 2 pieces. For models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. (Part No: 180705M1) $5.90

Radiator Shroud - Fits 16" fan. For models (5000 except row crop), 5900, (5600, 6600 up to 9/1980), 340, 340A, (345C up to 1/1991), (445, 545 with loader up to 9/1985), (445 10/1985 and up), (445C up to 1/1991), 535, 550, 555A, 650, 4500, 5550, 6500. (Part No: E5NN8146EA) $29.25

Temperature Sender, Water - Fits 2000, 2600, 3000, 4000, 5000, 7000, (1965-1975). (Part No: C4AH10884A) $8.84

Thermostat - Thermostat, 168, with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Dexta, Super Dexta (Part No: D8NN8575AAWG) $12.18

Thermostat - Thermostat, 188, with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700 (Part No: D8NN8575BAWG) $13.99

Thermostat - 172 degree, with gasket. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8700, 9000, 9700, Major, Super Major. (Part No: D8NN8575CAWG) $13.10

Water Pump - Water pump with double groove pulley, less rear housing. For models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 5110, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: FAPN8A513DD) $89.64

Water Pump - With Single Groove Pulley, Less Back Housing. Replaces FAPN8A513GG. For 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5710, 5610, 6610, 6710, 7610, 7710. Also replaces FAPN8A513GG. (S.65018) (Part No: EAPN8A513F) $49.90

Water Pump Pulley - Single groove. For models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3910H, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5110, 550, 555, 555A, 555B, 5600, 5610, 5700, 6410, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7700, 7710. (Part No: C5NE8509A) $48.91

Decals and Emblems
Decal Set - Hood Only Decal Set for Ford Model 5000, up to 1968, 2 pieces Printed on Vinyl. (Part No: R0512) $22.50

Decal Set, Complete - 15 decals per set. For model 5000 diesel 1968-1975. (Part No: S.66693) $53.79

Decal Set, Hood - For model 5000 with Jubilee style sheet metal. (Part No: R5199) $22.50

Ford Letter Set - Chrome with Red letter. For 1 side of Hood. 2 required per tractor. Price is for 1 side. For (2000, 4000 1962-64), (2000, 3000, 4000, 5000 1965 to 1/1971). (Part No: 86514060) $26.43

Shift Pattern Decal - For models 5000, 7000 with 8 speed transmissions. (Part No: D3NN7B292B) $12.20

Drive Train
Axle Shaft Seal - Seal & retainer assembly, outer, for rear axle shaft. For models 3910, 4000, 4100, 4110, 4600, 4610, 5000. (Part No: C5NN4969D) $28.02

Axle Shaft Seal - Seal & retainer assembly, outer, for rear axle shaft. For models 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: C5NN4969E) $24.62

Differential Bearing - For models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 4600, 4610, 4630, 4830, 5000, 5030, 5110, 5600, 5610, 5640, 5700, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8210, 8240, 8340, Dexta, Super Dexta, TS100, TS110, TS115, TS80, TS90. (Part No: 81803420) $83.20

Differential Lock Gear Case Adaptor - For models 2000, 3000, 5000, 6600, 6610. (Part No: E186EB9) $110.62

Gear Shift Coupler, Front - 28 teeth, 17 splines. For models 2310, 2610, 2810, 2910, 335, 340, 3550, 3600, 3610, 3900, 3910, 4000, 4110, 4140, 4400, 4410, 445, 4500, 4600, 4610, 5000, 5100, 5110, 535, 545, 550, 555, 5600, 5610, 5640, 5700, 5900, 6410, 6600, 6610, 6640, 6710, 6810, 7100, 7600, 7610, 7700, 7710, 7740. (Part No: E6NN7N072AA) $49.80

Gear shift assembly - For models 5000, 5100, 5200, 7000, 7100, 7200 (Part No: C5NN7222) $133.65

Gear, Differential Side - Part 1 in the picture. For models (2000, 3000, 4000 all 1965-1975 LH with diff. lock, LH or RH without locks), (5000, 7000 all 1965-1975 RH with Diff. lock, LH/RK without diff locks), (2600, 3600, 4100, 4600 all 1975-1981 LH with diff. lock, LH/RH without locks), (5600, 5700, 6600, 6700, 7600, 7700 all 1975-1981 RH with Diff. lock, LH/RH without locks), (2610, 3610, 4110 all 1981 and up LH with diff lock, LH/RH without locks), (5610, 6610, 6710, 7610, 7710 all 1981 and up RH with diff lock, LH/RH without locks). (Part No: C5NN4236A) $102.99

Gear, Reverse - 28/32 tooth, 1.800" I.D, 4.800" O.D. Replaces C5NN7N012B. For models 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. (Part No: E6NN7N012AA) $103.25

Gear, Reverse - 28/32 tooth, 1.800" I.D., 4.800" O.D.. For models 2610, 2810, 2910, 335, 340, 3400, 3550, 3610, 3900, 3910, 4000, 4110, 4400, 4410, 4600, 4610, 5000, 5100, 5110, 535, 540, 545, 5600, 5610, 5900, 6410, 6600, 6610, 6700, 6710, 6810, 7100, 7200, 7600, 7610, 7700, 7710. Replaces C5NN7N012B, E6NN7N012AA. (Part No: 83960462) $188.06

Gear, Reverse, 8 Speed Transmission - 30/28 teeth, 17 spline. For models (3000, 4000, 5000, 7000 all with 8 spd trans 1965-69). (Part No: C5NN7N012A) $157.05

Input Shaft, Transmission - For models 5000, 5100, 5600, 6600, 6700, 7100, 7200, 7600, 7700. All without dual power. (Part No: C5NN7017A) $80.06

Main Shaft - 30/18 teeth. For models (5000 with dual power 6/1973 and up), (5600, 6600, 6700, 5610, 6610, 6710, 6810 with dual power), 7810, 8010, 5610S, 6610S, 7610S, 7810S, (5640, 6640, 7740, 7840, 8240, TS90, TS100, TS110 with 8 spd less dual power, 16 spd with dual power). Replaces E7NN7C094AA. (Part No: 82983066) $181.12

Mainshaft, Transmission, Select-o-Speed - 30 teeth, 16 & 18 splines. For models (2000, 3000, 4000, 5000 all select-o-speed #2 & #3 clutch). (Part No: C5NN7C094B) $349.36

Shift Knob - For models Dexta, Super Dexta, (Major from 8/1958 up to 1964) 2100, 2600, 2610, 3000, 3100, 3120, 3400, 3600, 3610, 4000, 4110, 4140, 4400, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5600, 5610, 5640, 5900, 6410, 6600, 6610, 6810, 7100, 7200, 7600, 7610, 7740. (Part No: C5NN7213A) $4.09

Shift Knob - 3/8" NF thread. For models 2000, 3000, 4000, 5000, Dexta. (Part No: 957E7213A) $4.95

Spider Cross, Differential - For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Super Dexta. (Part No: E1NN4211AA) $52.92

Spider Gear - Gear, differential spider. For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, Dexta, Major, Super Dexta, Super Major. (Part No: DDN4213B) $43.78

Transmission Bearing Cone - Main drive shaft & countershaft bearing cone for 3 & 4 speed transmissions. For models 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7066) $8.53

Transmission Bearing Cup - Main drive shaft & countershaft bearing cup for 3 & 4 speed transmissions. For models 2000, 2N, 3000, 4000, 5000, 600, 700, 800, 8N, 900, 9N, NAA, NAB. (Part No: 9N7067) $13.32

Transmission Input Shaft with Dual Power - 8.78" long. For models (5000, 7000 1/1973 and up), 5600, 6600, 6700, 7600, 7700, 5610, 5610S, 6610, 6610S, 6710, 7610, 7610S, 7710, 8010, 6640, 7740, 7840, 8240, TS90, TS100, TS110. (Part No: D2NN7017A) $187.04

Electrical System
12 Volt Conversion Kit - For models 2000, 3000, 4000, 5000, 7000. 1965 and up, gas and diesel. Converts 6-volt systems to 12-volt and updates older 12 volt tractors- Replaces Lucas Generator Includes rebuilt unicharge alternator with pulley and internal self exciting regulator, brackets, wiring harness and instructions. Includes tach drive. (Part No: 6X10300ALTH) $357.29

Battery Cable - Battery cable less boot, 38" long, battery to relay, 2 gauge. For models 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5200, 5600, 5610, 6600, 6610, 7000, 7610. (Part No: D2NN14300C) $21.76

Battery Cable - Battery cable, 34", battery to ground. For 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4600, 4610, 5000, 5110, 5600, 5610, 5910, 6410, 6600, 6610, 6810, 7600. (Part No: C7NN14301C) $24.08

Control Box - For 2000, 3000, 4000, 5000, 7000. Control Box - 11 Amp. (Part No: C7NN10505D) $35.59

Distributor Dust Cover Assembly - Dust cover assembly for distributor breaker. For 3- and 4-cyl gas engines. Tractors with Delco Distributor: 2000, 3000, 4000, 5000 (1965-1974), 2600, 3600, 4100, 4600, 5600, 6600 (1975 & up). Replaces C5NF12239A. (Part No: C7NF12239A) $27.24

Distributor Dust Cover Seal - Seal for Part number C7NF12239A. (Part No: s.11453) $2.00

Electronic Ignition Conversion Kit -12V Negative Ground - Electronic Ignition Conversion Kit by Pertronix. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For models with 4 cylinder: 5000, 5100, 5200, 6000, 6600. (Part No: 1249) $92.07

Fuse Box Assembly - For models (2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3150, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4100 all 8/1970 and up without hazard warning indicators), (4330, 4340, 5000, 5100, 5340, 7000 all 8/1970 and up without cab or hazard warning ind.), (3110 5/1973 and up without cab or hazard warning ind.), (4140 5/1973 and up without hazard warning ind.) Replaces C9NN14N030B. (Part No: D2NN14N030A) $27.43

Generator, Less Pulley & Tach Drive - New LUCAS Type Generator 12V, 22 amp - 1965-75 2000, 3000, 4000, 5000, Gas and Diesel, (620, 622 1967-74), (7000 1971-75 with 4-256), 1968 All 8000, 9000 series (up to Dec/1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. LESS pulley & tach drive. Pulley is available (see p/n C5NF10196B). Tach Drive available (see part #C5NF17B282B). Replaces Lucas 22756, C4NN10002B, C9NN100001, 3109419R91, C5NG10000E, C7NN10000A. (Part No: C7NN10000C) $89.79

Generator, Pulley - 1/2 Inch Keyed Hub, 3 1/2 Inch Outside Diameter. Uses 1/2 inch belt. For models 1965-75 2000, 3000, 4000, 5000, Gas and Diesal, 1968 All 8000, 9000 series (up to Dec/1969). INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500. Fits generator C7NN10000C. (Part No: C5NF10196B) $26.58

Ignition Switch, Keyed - Three position, 7 terminal. For models (2000, 3000, 4000, 5000, 7000 1965-1975), 8000-9700, TW10, TW20, TW30, all 1968-1982. For 2600-7700 1975-1981. For 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 532, 535, all 1981-1990. For 7810-8210 1982-10/1985. For TW5-TW35 to 5/1983-2/1990. 8530-8830 3/1990 and up. Starter and Heat Ignition Switch for tractors with cold start. Replaces OEM C5NN11N572A, D5NN11N572A, E8NN11N501AA. (Part No: E7NN11N501AB) $12.80

Ignition Tune Kit - Include spark plugs, points, condenser, and Rotor (4 cylinder). For models 5000, 6600, 5500, 5550. (Part No: S.66450) $23.48

Manifold Heater - Thermostart Intake Manifold Heater. Diesel cold weather starting aid. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 7000, 7600, 7610, 7700, 7710 (Part No: C5NE9A436A) $23.95

Starter - With single contact solenoid, 12 volt, 10 tooth, CW rotation. For models TW10, TW20, TW25, TW30, TW35 1979-83 with 6-401, 2000, 3000 1965-75 with 3-158, 2310 1982-85, 3-158, 2610 1982-85, W 3-175, 2810 1983-89 with 3-158, 2910 1983-89 with 3-175, 3000 1965-68 with 3-175, 3230 1990-95 with 3-192, 3430 1990-98 with 3-192, 3610 1982-83 with 3-192, 3910 1983-90 with 3-192, 3930 1990-96 with 3-201, 4000 1965-72 with 3-192 or 3-201, 4100 1978-81 with 3-183, 4110 1977-83 with 3-201, 4630 1989-96 with 3-201, 1990-99 with 3-192 dsl, 5000 1965-76 with 4-256, 5030 1992-96 with 4-256, 5600 1975-81 with 4-256, 5610 1981-92 with 4-256, 5900 1985-93 with 4-256, 6600 1975-81 with 4-256 dsl, 6610 1982-92 with 4-268, 6700 1975-81 with 4-256, 6710 1982-85 with 4-256, 7000, 7100, 7200 1971-75 with 4-256), 7400 1975-76 with 4-256, 7600, 7700 1975-81 with 4-256, 7710 1982-91 with 4-268, 7810 1978-91 with 6-401, 8000 1968-87 with 6-401, 8210 1978-91 with 6-401. All with diesel engines. Replaces 26395, 26211, 26339A. (Part No: SLU0002) $150.53

Starter - 12 volt, 10 tooth, Clockwise rotation. For models (2000 gas), (2030 1961-64 with 3-158 diesel), (3000 1965-75 with 3-158 diesel), (5000 1965-76 with 4-256 or 4-233 diesel). Replaces C5NF11001B, D0NF11001A. (Part No: SFD0089) $111.24

Starter Drive - Starter drive assembly. For 2000, 3000, 4000, 5000 (Part No: D2NN11350B) $17.80

Starter Drive - Starter drive for original Ford & Tisco 5" diameter starter D8NN11000CE. For models 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 540, 545, 550, 555, 5600, 5610, 5700, 5900, 655, 6600, 6610, 6700, 6710. (Part No: E4NN11350AA) $35.56

Starter Drive - Replaces; D2NN11350A, 2701E11005A. For models 2000, 2110, 2300, 230A, 234, 2610, 2810, 2910, 3000, 3310, 3500, 3610, 3900, 3910, 4000, 4100, 4110, 4500, 4600, 4610, 5000, 5200, 531, 532, 5340, 5610, 5700, 5900, 6600, 6610, 6710, 7600, 7610, 7710, 7810, 7910, 800 Series, 900 Series, A62, A64, A66, 2100, 2120, 3100, 3110, 3120, 334, 335, 3400, 420, 4200, 4330, 4340, 4400, 5100, 550, 4140, 2310N, 3300, 333, 535, 5600, 6700, 7100, 7700, 2150, 3055, 3150, 3330, 4410, 530A, 7200, 4410SU, 5110, 6410, 6810, 7410, 8400, 8600, 8700, 9200, 256, 8210, 8530, 8630, 8730, 8830, 9600, 9700. (Part No: C5NF11005C) $15.90

Starter Safety Switch - Safety starter switch. For 2000, 2100, 3000, 3100, 3400, 3500, 3550, 4000, 420, 445, 4500, 5000, 532, 535, 545 (Part No: C7NN7A247B) $14.40

Starter Safety Switch - For models 2000, 3000, 4000, 5000, 7000 all with 8 speed, dual range, 10-1966UP. For 2100, 3100, 3400, 3500, 3550, 4400, 4500, 10-1966 up with manual reversing trans. Ind: 231, 233, 335, 2600, 3600 all with 6 spd 1975 up. Ind: 231, 233, 333, 335, 420, 515, 531, 532, 535, 2600, 3600, 340, 445, 540, 545, 4100, 4600, 4600SU, all 8 spd and 1975 and up. For 5600, 6600, 7600 with 7 & 8 speed and 1975 and up. For 5700, 6700, 7700 with 7 & 8 speed 8-1976 and up. For 335, 2600, 3600, 340, 420, 515, 535, 445, 540, 545 all with manual reversing transmission 1975 and up. For 5700, 6700, 7700, all clutch controls 8-1976 and up. For 8000, 9000, TW10, all clutch controls 1968 and up. For TW20, TW30, both clutch controls 1979 and up. (Part No: C7NN7A247A) $23.16

Starter Solenoid - For 2000, 3000, 4000, 5000, 3900, 4100, 4600, 5600, 6600, 7700 With 5" Starter (Part No: D7NN11390B) $25.95

Starter Solenoid - For Starter D8nn11000DA on 2000 and 3000 diesels 1973-1975, 5000 gas 12/1972-1975, (2600, 3600, 231, 233, 333, 335, diesel 1975-1981), 2610 (81-83), 2810 (84-90), 2910 (83-90), 3310 (65-74), 4000 series (65-74), 4100 (75-81), 4110 (81-90), 4600 (75-81), 4610 (81-90), 5340 (68-74) 6600 gas 1975-1981, 7000 series (71-74). NOT FOR D8NN11000CE 5" starter. (Part No: D7NN11390A) $25.95

Starter, DIESEL engines - New Starter with drive for most DIESEL engines in models 801/901 series and 2000 thru 8830. 5 inch diameter. Note difference in solenoid end of Part # 83981923. Bendix has 10 teeth. May replace 9 tooth starters. Verify part number before ordering. (Part No: D8NN11000CE) $151.93

Starter, Lucas - With single contact solenoid, 12 volt, 10 teeth, clockwise rotation. For models (1100, 1495, 276 with Ford diesel), (1112, 1114, 2100, 2300, 2300A, 231, 2600, 2610, 3110, 3120, 3330, 334, 340, 3400, 340A, 3600, 3610, 3610NO, 4110N, 420, 4200, 4340, 4400, 445, 4500, 4600, 4600NO, 4600SU, 4610, 4610O, 4610SU, 5000, 5100, 515, 5200, 530A, 531, 5340, 535, 540A, 545, 550, 909 diesel), 1118, (2000, 4000 3 cyl. diesel). (Part No: 83981923) $204.29

Starter, Lucas - With single contact solenoid, 12 volt, 10 teeth, clockwise rotation. For models 7600, 7600C, 7610, 7610O, 7700, 7710, 7810, 7810O, 7910, 8000, (912 4 cyl.), (L783, L785 with loader restraint), 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 910, 9200, 9600, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5, (907 diesel), (4830O, 5030, 5030O 3/1992 and before), (5000, 5100, 5340 gas 6/1971 and up), (6410 UK). (Part No: 83981923) $204.29

Voltage Instrument Stabilizer - For (2000, 3000, 4000, 5000, 7000, 1965-1975), (2600, 3600, 4100, 4600, 5600, 6600, 7600, 1976 to 1981). Voltage stabilizer for instrument cluster replaces C5NN10N507A (Part No: C7NN10N507A) $29.15

Voltage Regulator - 12 Volt - For models 2000, 3000, 4000, 6000, 5000, 7000 With Lucas Generator. (Part No: D0NN10505A) $25.20

Engine Bearings
Camshaft Bearing - Single camshaft bearing fits the following gas & diesel tractors 1965 & up: 2000, 3000, 2600, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6700, 7000, 7600, 7700, 7610, 7710, 8000, 8200, 8600, 8700, TW10, 9000, 9200, 9600, 9700. (Part No: C5NE6261B) $8.68

Main Bearing Set, .010 - Replaces 4-CFPN6333D & 1-EBPN6337D. For 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: MBK634-010) $96.34

Main Bearing Set, .020 - Replaces 4-CFPN6333E & 1-EBPN6337E. For 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: MBK634-020) $98.05

Main Bearing Set, .030 - Replaces 4-CFPN6333F & 1-EBPN6337F. For models 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: MBK634-030) $87.56

Main Bearing Set, Std - Main Bearing Set. For models 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Replaces 4-CFPN6333B & 1-EBPN6337B. (Part No: MBK634) $86.51

Rod Bearing, .010 - SINGLE rod bearing (.010 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211D) $14.06

Rod Bearing, .020 - SINGLE rod bearing (.020 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211E) $14.50

Rod Bearing, .030 - SINGLE rod bearing (.030 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211F) $14.58

Rod Bearing, .040 - SINGLE rod bearing (.040 size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211G) $14.92

Rod Bearing, STD - SINGLE rod bearing (STD size) for the following 3-cylinder gas or diesel engines: 158, 175, 192, 201, and the follwing 4-cylinder diesel engines: 233, 256 and the 401 6-cylinder diesel engine. (you must order 1 bearing per cylinder for complete engine). For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000, 8200, 8600, 8700, TW10 (Part No: DFPN6211B) $11.70

Thrust Bearing - For models 5000, 5600, 5610, 5700, 6600, 6600C, 6610, 6700, 6710, 7000, 7600, 7600C, 7610, 7700, 7710. (Part No: C0NN3A299A) $16.72

Engine Gaskets
Crank Seal, Front - Fits 3, 4 and 6 cylinder diesel engines in: 2000, 2600, 3000, 3600, 3610, 3910, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6640, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8160, 8200, 8240, 8260, 8340, 8360, 8560, 8600, 8700, 9000, 9200, 9600, 9700, TS80, TS90, TW10, TW20, TW30. (Part No: D5NN6700A) $8.80

Crank Seal, Rear - Fits 3, 4 and 6 cylinder diesel engines in: 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30 (Part No: E5NN6701BA) $17.32

Gasket Set, Complete - For 233 CID DIESEL engine in: 5000 (1965 to 3/1968), (5600 & 5700, 1975 to 9/1980) . Contains upper & lower sets, and head gasket. (Part No: FS5000) $98.12

Gasket Set, Complete - For 256 GAS/DIESEL or 268 CID DIESEL engines in: 5000 (4/1968 to 1975), 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Contains upper & lower sets, and head gasket. (Part No: FS5670) $107.24

Gasket Set, Lower - For 233/268 DIESEL or 256 GAS/DIESEL engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: CFPN6A008C) $77.26

Head Gasket - For 233 CID DIESEL engine in: 5000 (1965 to 3/1968), 5600, 5700. (Part No: D3NN6051F) $22.65

Head Gasket - For 233/268 DIESEL or 256 GAS/DIESEL engines in: 5000 (4/1968 to 1975), 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: F1NN6051BA) $34.23

Oil Pan Gasket - Gasket, oil pan. For GAS/DIESEL engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: 87840324) $18.32

Oil Seal - Oil seal, inner for rocker shaft. For models 5000, 5600, 5610, 6600, 6610, 7000, 7600. (Part No: C5NN3C615B) $10.98

Upper Gasket Set - For 233 CID DIESEL 4.2 INCH BORE engine in: (5000, 1965 to 3/1968), 5600, 5700. Includes head gasket. (Part No: HS5000) $37.94

Upper Gasket Set - For 233/268 DIESEL or 256 GAS/DIESEL engines 4.4 INCH BORE in: 5000 (4/1968 to 1975), 5600, 5700, 6600, 6700, 6610, 6710, 7000, 7600, 7610, 7700, 7710. Includes head gasket. (Part No: HS5670) $43.63

Upper Gasket Set, Less Head gasket - For 233/268 DIESEL or 256 GAS/DIESEL engines in: 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Does NOT include head gasket. (Part No: CFPN6008C) $24.78

Valve Cover Gasket, 4 CYL - Gasket, valve cover. For models 5000, 5110, 5600, 5610, 5700. (Part No: C7NN6584C) $5.92

Engine Rebuild Kits
Basic In-Frame Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-framekit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3/1968), 5600 (1975-9/1980), 5700 (1975-9/1980). (Part No: BIFF2330D) $360.40

Basic In-Frame Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-frame kit with.020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3/1968), 5600(1975-9/1980), 5700 (1975-9/1980). (Part No: BIFF2332D) $370.81

Basic In-Frame Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-frame kit with .030" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3/1968, 5600(1975-9/1980), 5700 (1975-9/1980). (Part No: BIFF2333D) $370.81

Basic In-Frame Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic in-frame kit with .040" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (1965-3/1968), 5600 (1975-9/1980), 5700 (1975-9/1980). (Part No: BIFF2334D) $370.81

Basic In-Frame Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic in-frame kit with standard pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (4/1968-1975), 5600 10/1980-1981), 5700 10/1980-1981), 6600 (1975-9/1980), 6700 (1975-9/1980). (Part No: BIFF2560D) $332.21

Basic In-Frame Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic in-frame kit with .020" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (4/1968-1975), 5600 10/1980-1981), 5700 10/1980-1981), 6600 (1975-9/1980), 6700 (1975-9/1980). (Part No: BIFF2560D) $332.21

Basic In-Frame Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic in-frame kit with .030" oversize pistons, rings, valve grind gasket kit, oil pan gasket. For 5000 (4/1968-1975), 5600 10/1980-1981), 5700 10/1980-1981), 6600 (1975-9/1980), 6700 (1975-9/1980). (Part No: BIFF2563D) $375.85

Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains standard pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (1965-3/1968), 5600 (1975-9/1980), 5700 (1975-9/1980). (Part No: BEKF2330D-LCB) $477.67

Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit. Contains .020" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (1965-3/1968), 5600 (1975-9/1980), 5700(1975-9/1980). (Part No: BEKF2332D-LCB) $477.67

Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit, contains .030" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (1965-3/1968), 5600 (1975-9/1980), 5700 (1975-9/1980). (Part No: BEKF2333D-LCB) $477.67

Basic Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Basic Engine Kit, contains .040" pistons, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000, 5600, 5700. (Part No: BEKF2334D-LCB) $477.67

Basic Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit less rod & main bearings with standard pistons D4NN6108AA, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (4/1968-1975), 5600 (10/1980-1981), 5700 (10/1980-1981), 6600(1975-9/1980), 6700 (1975-9/1980). (Part No: BEKF2560D-LCB) $389.52

Basic Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit, less rod & main bearings with .020" o/s pistons D4NN7108AC, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (4/1968-1975), 5600 (10/1980-1981), 5700 (10/1980-1981), 6600(1975-9/1980), 6700 (1975-9/1980). (Part No: BEKF2562D-LCB) $467.53

Basic Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Basic Engine Kit, less rod & main bearings with .030" o/s pistons D4NN6108AD, rings, pin bushings, complete gasket kit. Order bearings separately. For 5000 (4/1968-1975), 5600 (10/1980-1981), 5700 (10/1980-1981), 6600(1975-9/1980), 6700 (1975-9/1980). (Part No: BEKF2563D-LCB) $467.53

Cylinder Head Overhaul Kit - Engine Kit, Valve Overhaul For 5000 with ENGINE CID: 233 256 ENGINE CYL: 4 FUEL: Gas & Diesel (Part No: VOKF233) $96.26

In Frame Engine Overhaul Kit - Made by TISCO. For 5000 4/1968-1975 256 CID Diesel, 4 cylinder, 4.4" bore. In Frame Engine Overhaul Kit includes Piston Liner kit, Connecting Rod Bearing kit, and Overhaul Gasket set. When ordering, specify in comments section Piston Size of Standard, .020, .030 or.040, Bearing size of Standard, .010, .020, .030 or.040. (Part No: IK256) $405.85

In-Frame Engine Kit - Made by TISCO. For 5000 series with 233 CID diesel 4 cylinder engine 4.2" standard bore 1965-3/1968, 5600, 5700 series 1975-9/1980. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF233xD) $341.88

In-Frame Engine Kit - Made by TISCO. For 5000 series 4/1968-75, 5600, 5700 series 10/1980-81, 6600, 6700 series 1975-9/80, all with 256 CID diesel 4 cylinder 4.4" standard bore engine. Contains Pistons with pins and rings, upper gasket set, head gasket and oil pan gasket. Specify Piston Size of: Standard, .020", .030" OR.040" Oversize in comments section when ordering. (Part No: BIFF256xD) $346.51

Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 5000 With 233" Engine (1965-3/1968) Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030), standard camsahft bearings, intake and exhaust valves. (Part No: EOKF2330D) $675.59

Overhaul Kit - Made by TISCO. Complete Overhaul Kit For Diesel 5000 With 256" Engine (4/1968-1975) Contains complete gasket set, piston & ring set (available in Std., .020.030 or.040 oversize), rod bearings (available in Std., .010, .020.030 or.040), & main bearings (available in Std., .010, .020, or.030), standard camsahft bearings, intake and exhaust valves. (Part No: EOKF2560D) $547.85

Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. For 5000. (Part No: EOKF2330D-LCB) $550.14

Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains .020" pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 5000. (Part No: EOKF2332D-LCB) $550.14

Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 5000 (Part No: EOKF2333D-LCB) $550.14

Overhaul Kit, 233 Diesel - Made by TISCO. 233 CID 4 cylinder diesel 4.2" standard bore. Engine overhaul kit contains .040" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. Order bearings separately. For 5000. (Part No: EOKF2334D-LCB) $550.14

Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overahaul kit with standard pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys. less bearings. Order bearings separately. For 5000(4/1968-1975). (Part No: EOKF2560D-LCB) $454.16

Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overhaul kit with .020" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 5000(4/1968-1975). (Part No: EOKF2562D-LCB) $531.00

Overhaul Kit, 256 Diesel - Made by TISCO. 256 CID 4 cylinder diesel 4.4" standard bore. Engine overhaul kit with .030" oversize pistons, rings, complete gasket kit, pin bushings, cam bearings, intake & exhaust valves, springs, valve keys, less bearings. Order bearings separately. For 5000(4/1968-1975). (Part No: EOKF2563D-LCB) $531.00

Rebore Kit - Made by TISCO. Re-bore sleeve & piston kit. For 5000, 5600, 5700, 6600, 6700. Contains Pistons, sleeves, rings, pins and pin retainers. (Part No: RBK679) $695.06

Rebore Kit - 4.400 Bore For 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine (Part No: R3352) $293.75

Rebore Kit - .020 Oversize For 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine (Part No: R3353) $293.75

Rebore Kit - .030 Oversize. For models 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine. (Part No: R3354) $293.75

Rebore Kit - .040 Oversize For 5000, 5500, 5610, 6000, 6600 with 256 Diesel Engine (Part No: R3355) $293.75

Engine Parts
Camshaft - For 4-cyl gas or diesel engine in tractors 5000 (1965 to 1975); 5600, 5700, 6600, 6700, 7600, 7700, (1975 to 1981); 5610, 5900, 6610, 6710, 7710, (1981 to 1991);industrials 650, 6500, 750, 755, 755A, 7500, (1972 to 7-1987);755B, (8-1987 to -);655, 655A, (6-1985 to 10-1988). With 3/16" Keyway. Replaces C7NN6250B, E1TN6250AA, E6NN6250AA. (Part No: 87800353) $175.49

Connecting Rod - Remanufactures with pin bushing for gas and diesel replacing casting numbers CN6202 and C7NN6202 for models: 2000, 3000, 4000, 5000, 8000, 8600, 8700, TW5, TW10. Refundable $25.00 core charge will be added to your order (Part No: R1203165) $99.00

Connecting Rod Bolt - ** Must Be ordered in multiples of 4, priced each. ** For gas or diesel Models: 1965-75 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 6710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. Replaces C5NE6214A, E4TN6214AB, E8NN6214AA, E9NN6214BA. 3 1/4 inches long, 3/8 dia. (Part No: E4TN6214AA) $4.80

Connecting Rod Nut - Must be ordered in multiples of 10 price is for each. For gas or diesel Models: 1965-75 2000, 3000, 4000, 5000, 7000, 8000, 9000, 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 8600, 8700, 9600, 9700, 2610, 3610, 4110, 4610, 5610, 6610, 66710, 7610, 7710, TW5, TW10, TW15, TW20, TW25, TW30, TW35. (Part No: 385279S2) $1.46

Connecting Rod, Reconditioned - For models 2000, 3000, 4000, 5000, 8000, 8600, 8700, TW5, TW10. All with gas or diesel engine and casting # CN6202, C7NN6202, C5NE6303R. (Part No: R1202365) $104.94

Crankshaft Repair Kit - Speedi Sleeve Crankshaft repair kit will sleeve the end of the crankshaft that has a wear groove worn by the crankshaft seal. Ultra thin sleeve slides over damaged crank. Allows the use of standard seal E5NN6701BA. For 2000, 2600, 2610, 2810, 2910, 3000, 3110, 3600, 3610, 3910, 4000, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: 99472) $127.21

Crankshaft, New - 4 cylinder, 4.2" stroke, 12.5mm 78 tooth balancer gear. Uses 36mm wide Rod bearings. NOTE: Measure balancer drive gear before ordering. Do not mix sizes (new OEM cranks are 15mm). For models 5000, 5500, 5610, 6000, 6600, 6700, 7000. (Part No: C5NE6303K) $683.10

Engine Balancer - For 2000 3 cyl gas, 3000 gas, 4000 3 cyl gas, 5000 gas and diesel, 5600, 6600, 6610, 6700, 6710, 6810, 7000, 7410, 7600, 7610, 7700, 7710. (Part No: D9NN6A311AD) $373.00

Exhaust Valve, 201 CID Gas or Diesel & 192 Gas, .003 - Exhaust valve, .003" o/s stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C7NN6505F) $21.36

Exhaust Valve, 201 CID Gas or Diesel & 192 Gas, .015 - Exhaust valve, .015" o/s stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C7NN6505G) $26.98

Exhaust Valve, 201 CID Gas or Diesel & 192 Gas, STD. - Standard exhaust valve. For models 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C7NN6505E) $12.64

Intake Valve, 201 CID Gas or Diesel & 192 Gas, .003 - Intake valve, .003 o/s stem. For 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C5NN6507C) $13.44

Intake Valve, 201 CID Gas or Diesel & 192 Gas, .015 - .015" O/S stem. For models 2000, 3000, 4000, 4600, 4610, 5000, 8000, 8200, 8600. (Part No: C5NN6507D) $13.61

Intake Valve, 201 CID Gas or Diesel & 192 Gas, STD - H Standard intake valve. For models 2000, 3000, 4000, 5000, 8000, 8200, 8600. (Part No: C5NN6507B) $12.18

O-Ring Kit - O-ring kit for lift cover & pump. For models 2000, 3000, 4000, 5000, 7000. (Part No: B5001) $12.92

O-Ring Kit - O-ring kit, valve mounting. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: DHPN485A) $10.72

Push Rod - For models 2000, 3000, 4000, 5000, 7000, all for 3 or 4 cylinder Diesel from 8/1965 to 1975. Push Rod is 12.17 inches long. (Part No: C5NE6567B) $9.94

Ring Gear, Flywheel, 128 Tooth count - For Diesel 2000, 3000, 4000, 5000, 6000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 6600, 7700, all 1975-1981. For 5000 gas 6/1971-1975. For 3230, 3430, 3930, 4130, 4430, 4830, 5030, 3/1990 and up. Replaces C5NE6384AA. Starter Flywheel Ring Gear. (Part No: E2NN6384AA) $39.62

Rocker Arm - Rocker arm for exhaust valve. For models 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Part No: C5NE6529A) $22.74

Rocker Arm - Rocker arm, for intake valve. Replaces D9NN6529AA. For models 2000, 3000, 4000, 5000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5110, 5610, 5910, 6610, 6710, 3230, 3430, 3930, 4130, (4630 until 5/1994), 4830, 5030, 5640, 6640, 7740, 8340, 8260, 8360, 8560, 233, 333, 334, 335, 231, 530A, 535, 420, 515, 532. (Part No: D9NN6529AB) $22.74

Tappet, Diesel Engines - Tappet, 2.06" long, .990" dia., DIESEL ENGINES ONLY. For 2000, 2600, 2610, 3000, 3230, 3430, 3600, 3610, 3930, 4000, 4100, 4110, 4130, 4430, 4600, 4610, 4830, 5000, 5030, 5600, 5610, 5640, 5700, 6600, 6610, 6640, 6700, 6710, 6X, 7000, 7600, 7610, 7700, 7710, 7740, 7840, 7910, 8000, 8210, 8240, 8340, 8530, 8630, 8700, 8710, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Sold in quantities of 2, priced individually. (Part No: C5NE6500C2) $15.76

Timing Gear, Camshaft - 26 teeth, internal keyway. Used in 158, 175, 192, 201, 233, 256, 256T, 268, 268T, 401, & 401T Engines. For models 4340, 4400, 4410, 4500, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5190, 5200, 5500, 5600, 5610, 5640, 5700, 5900, 6600, 6610, 6700, 6710, 6810, 7000, 7100, 7200, 7500, 7600, 7610, 7700, 7710, 7810, 7840, 7910, 8000, 8200, 8210, 8400, 8530, 8600, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. (Part No: C5NE6306A) $67.95

Valve Service Kit - For models 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Contains: springs and locks, (no valves). (Part No: VSKF233) $44.16

Engine Pistons and Sleeves
Pin Bushing, Piston - Fits 158 CID gas & diesel, 175 CID gas & diesel, 192 CID gas, 201 CID diesel, 233 CID diesel, 256 CID gas & diesel and 268 CID diesel. For models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710. (Part No: C5NE6207A) $8.08

Piston & Ring Kit - .020" oversize piston & ring kit For 5000, 5600, 5700 (Part No: PRK233-020) $389.45

Piston & Ring Kit - .030" oversize piston & ring kit For 5000, 5600, 5700 (Part No: PRK233-030) $282.18

Piston & Ring Kit - .040" oversize piston & ring kit For 5000, 5600, 5700 (Part No: PRK233-040) $389.38

Piston & Ring Kit - .020" oversize piston & ring kit. For 5000, 5600, 5700, 6600, 6700 (Part No: PRK256-020) $428.23

Piston & Ring Kit - .030" oversize piston & ring kit. For 5000, 5600, 5700, 6600, 6700 (Part No: PRK256-030) $281.60

Piston Sleeve - Sleeve only. Replacement for re-bore kits listed. Finished bore and honed. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30 (Part No: RBS514) $84.81

Piston Sleeve, Finished 4.4 Inch Bore - Engines 401 CID diesel & turbo diesel, 192 CID gas, 201 Gas & diesel, 256 CID gas & diesel, 256 turbo diesel, 233 diesel, 268 non turbo & turbo diesel.Used when boring non sleeved engine. For models 3000, 4000, 4600, 4610, 5000, 5600, 5700, 6000, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8200, 8600, 8700, 9000, 9200, 9600, 9700, TW10, TW20, TW30 (Part No: SD753) $33.25

Piston Sleeve, Semi Finished, 4.2 Inch Bore - Used when boring non sleeved engine, liner I.D. 4.2", O.D. 4.35" . For models 175 CID Diesel on;(2000 1965-1975), (2600 1975-1981), (3000 1965-1975), (4000 1965-3/1968). 192 GAS engine on; (3610 1981-4/1982), (3910 1981-4/1982), 233 Diesel engine on; (5000 1965-3/1968). (Part No: SD756) $35.80

Piston With Pin, 020 - For 256 Diesel engine (Oversize 0.020) in: 5000, 5600, 5700, 6600, 6700. (Part No: D4NN6108AC) $99.36

Piston With Pin, 030 - For 256 Diesel engine (Oversize 0.030) in: 5000, 5600, 5700, 6600, 6700. (Part No: D4NN6108AD) $120.19

Piston With Pin, STD - For 256 Diesel engine (Standard 4.4" bore) in: 5000, 5600, 5700, 6600, 6700. (Part No: D4NN6108AA) $111.51

Piston and Ring Kit - For 5000 with 233 CID, Diesel, 4 Cylinder, 1965-3/1968. Piston and Ring Kit contains Pistons, pins, retainers and rings. Standard Size. Also available are Oversize of.020 (PRK233-020), .030 (PRK233-030), and.040 (PRK233-040). When ordering, specify Oversize amount and appropriate part number in comments section of order form. (Part No: PRK233) $272.71

Piston and Sleeve Kit - For 5000 with 256 CID Diesel, 4 Cylinder, 4/1968-1975. Piston and Sleeve Kit contains Pistons, pins, retainers and rings. Also available in Oversizes of.020 (PRK256-020) and.030 (PRK256-020). When ordering, specify Oversize amount and appropriate part number in comments section of order form. (Part No: PRK256) $360.91

Piston with Pin - Standard bore piston, 4.2" standard bore. For models 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108L) $115.29

Piston with Pin - .020" oversize piston, 4.2" standard bore. For models 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108N) $115.61

Piston with Pin - .040" oversize piston, 4.2" standard bore. For models 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108S) $111.15

Piston with Pin, .030 - .030" oversize piston, 4.2" standard bore. For models 3000, 3600, 5000, 5600, 5700. All with either 175 CID or 233 CID 3 cylinder diesel engines. (Part No: D4NN6108R) $110.12

Engine Rings
Piston Ring Set, .020, 201 CID Diesel - .020" oversize ring set for 1 cylinder. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold Per Cylinder. (Part No: CFPN6149BD) $28.02

Piston Ring Set, .030, 201 CID Diesel - .030" oversize ring set for 1 cylinder. For 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold Per Cylinder. (Part No: CFPN6149BE) $23.61

Piston Ring Set, Diesel, .020 - Diesel 4.2" bore 3&4 cylinder engines, 158, 175 & 233 CID. .020 Oversize ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AT) $25.31

Piston Ring Set, Diesel, .030 - Diesel 4.2" bore 3&4 cylinder engines, 158, 175 & 233 CID. .030 oversize ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AU) $29.01

Piston Ring Set, Diesel, .040 - Diesel 4.2" bore 3&4 cylinder engines, 158, 175 & 233 CID. .040 oversize ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AV) $28.26

Piston Ring Set, Diesel, STD - Diesel 4.2" bore 3&4 cylinder engines, 158, 175 & 233 CID. Contains 3 compression rings at 3/32 and 1 oil ring at 3/16. Standard ring kit for 1 piston for: 2000, 2600, 3000, 3500, 3600, 5000, 5600, 5700. (Part No: CFPN6149AS) $24.75

Piston Ring Set, STD, 201 CID Diesel - Standard ring set for 1 piston. For models 4000, 4600, 5000, 5600, 5700, 6600, 6610, 6700, 6710, 8000. Sold per Cylinder. (Part No: CFPN6149BC) $27.78

Piston Rings - for one piston. For models (3000 1965-1975), (3600 1975-1981), (5000 1965-3/1968), (5600 1975-9/1980), (5700 1975-9/1980). (Part No: PR188) $15.39

Piston Rings, .020, 192-201 CID Gas - Oversize.020. For models 4000, 4600(With 192 and 201 CID Gas 3-Cylinder), 5000, 6600(With 256 CID Gas 4-Cylinder), all engines with a 4.4 inch standard bore. This ring set for one cylinder. (Part No: CFPN6149BH) $29.20

Piston Rings, .040, 192-201 CID Gas - Oversize.040. For models 4000, 4600(With 192 and 201 CID Gas 3-Cylinder), 5000, 6600(With 256 CID Gas 4-Cylinder), all engines with a 4.4 inch standard bore. This ring set for one cylinder. (Part No: CFPN6149BK) $23.04

Piston Rings-,Standard, 192-201 CID Gas - For models 4000, 4600(With 192 and 201 CID Gas 3-Cylinder), 5000, 6600(With 256 CID Gas 4-Cylinder), all engines with a 4.4 inch standard bore. This ring set for one cylinder. (Part No: CFPN6149BG) $24.09

Exhaust System
Exhaust Manifold, Vertical - For the following tractors with 4 cyl engines: 5000, 5100, 5200, 5900. INDUSTRIALS: 5500, 6500. Gasket (p/n S.65947 available for an additional charge, Specify in COMMENTS when ordering if needed Specify in COMMENTS when ordering if needed. ** $10 ADDED TO SHIPPING FOR THIS ITEM DUE TO WEIGHT** IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C5NE9430D) $69.58

Muffler - Oval muffler. Inlet 1-7/8" I.D. Outlet 2" O.D., 29" overall length. For Models: 2000, 3000, 4000, 4100, 4600, 5000, 6600. (Part No: C5NN5230AR) $47.60

Muffler - Oval muffler, aluminized. Inlet 1-3/4" I.D., outlet 1-3/4" O.D., overall length 20-1/2". For 2000, 2600, 3000, 3600, 4000, 5000 (Part No: C7NN5230G) $44.21

Muffler - Round muffler, aluminized. This high quality muffler has internal baffles. Inlet 1-7/8" I.D. Outlet 2" O.D., DIM A = 29" overall length. For 2000, 3000, 4000, 5000, 2600, 3600, 4100, 4600, 4110, 4610. Industrials: 230A, 231, 233, 234, 2110LGC, 333, 334, 335, 340, 340A, 340B, 3500, 3550, 420, 445, 450, 455, 4110LGC, 4400, 4500, 515, 530A, 531, 532, 535, 540, 540A, 540B, 545, 545A, 550, 555, 555A, 555B. Replaces DHPN5230A & FO17. (Part No: C7NN5230JM) $28.95

Muffler - Oval muffler, aluminized. Inlet 1-7/8" I.D. Outlet 2" O.D., 39" overall length. For 2000, 3000, 4000, 4100, 4600, 5000, 6600 (Part No: D5NN5230D-E) $61.06

Muffler - Oval muffler, for horizontal exhaust, aluminized. Body 4 1/2" X 9" shell dimension, 26 1/2" shell length, 41" overall length, 6" inlet length, 1 7/8" inlet I.D, 8 1/2" outlet length, 2" outlet O.D. For models 2910, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 515, 531, 535, 5600, 5700, 6500 late 6600, 6700 (Part No: E4NN5230GB) $82.07

Muffler - A=42", B=7", C=27", D=8", 1-7/8" inlet, 2" outlet. For models 4000, 5000, 4100, 4600, 4610, 5000, 5600, 5900, 6600, 6700, 650, 6500 late style, 515, 531, 535. Muffler - Highest Quality. Black Enamel Finish. (Part No: S.14520) $91.79

Muffler - High quality muffler for 2000, 3000, 4000 (except rowcrop), 5000(except rowcrop), 5500, 5550, 5900. Overall length 41-1/2", body length 15-1/2", inlet tube = 13", outlet 2 inch outside diamtert = 12-1/2" Black Enamel Finish. (Part No: C5NN5230R) $53.88

Muffler - For gas & diesel Horizontal Muffler 5000 1965 and up, 5100 & 5200 1966 and up. Oval, aluminated. Inlet 1 3/4" I.D., outlet 1 3/4" O.D.. Overall length 19 1/4". Replaces C5NN5230F. (Part No: C5NN5230AD) $36.33

Pipe - Inlet adapter pipe, 13-1/2 overall length. For models 2000, 3500, 4000, 5000. (Part No: D0NN5B255C) $20.96

Fuel System / Air Intake
Air Cleaner Assembly - For 4000, 5000, 4100 1975 AND UP. Air Cleaner Assembly, Oil Bath Type, 7 inches Diameter, 2.25 inch dia. inlet. (S.61385) (Part No: C5NE9600E) $64.75

Air Cleaner Bowl - Clear plastic pre-cleaner bowl, 7 1/2 inch outside diameter, for 2-1/4 inch inlet pipe. For models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 4000, 4100, 4110, 4600, 4610, 5000, 531, 5600, 5610, 5700. (Part No: C0NN9A663A) $11.98

Breather Cap - For dry-type air cleaners on gas tractorsFor 4000 less 4500 gas, 5000, all 1965-1975. 2 1/4" diameter Pre-Cleaner Assembly. (Part No: C5NN9A660A) $17.74

Cap Fuel, Diesel - Cap. For models 2000, 2600, 2810, 2910, 3000, 3600, 3900, 3910, 4000, 4100, 4110, 4600, 4610SU, 5000, 5110, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, 7810, 7910, 8210, 8530, 8630, 8700, 8730, 8830, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5. Replaces E7NN9030AA. This is a non-vented cap. (Part No: D5NN9030A) $9.98

Carburetor Kit, Basic - Kit for Holley R2923-1A, 2923-2, 3012-2, 3013-2, R3012-3A, R3013-4A, 3012, R3013-4F, 2923A, R3012-3, 12R31338, R3658A carbs on 2000 3 cyl., 3000 3 cyl., 4000 3 cyl., 5000. (Part No: H102) $28.00

Carburetor, Rebuilt - Fits 5000 - replacement for OEM R3658A. Add $50.00 core charge to price - this charge is refundable if you send your core to us. (Part No: 1322-CARB) $164.73

Carburetor, Rebuilt - Fits 5000 - replacement for OEM 13920. Add $50.00 core charge to price - this charge is refundable if you send your core to us. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 1323-CARB) $164.73

Diesel Injection Pump - For models 5000, 5100, 6600, 6700 with 256 CID Diesel. Replaces D3NN9A543L, E1NN9A543MA. CAV3249F771. (Part No: 3249F771) $696.02

Dry Air Cleaner Element - For models 2000, 3000, 4000, 5000, all diesel 1965 and up. For models 2600, 3600, 4600, all gas 1975 and up. Dry element for C5NN9600E dry air cleaner. (Part No: D0NN9B618B) $35.06

Dual Fuel Filter Head - For 3000 1965-12/1968, 5000 1965-9/1969. Head for dual fuel filter with Simms injection pump. (Part No: C5NE9165A) $33.21

Fuel Cap - For 2000, 3000, 4000, 5000. Fuel Cap for under hood fuel tank. (Part No: C5NN9030B) $9.90

Fuel Cap, Vented - 2-5/8" O.D, chrome Finish, 1-3/4" edge of tang to edge of tang, vented, includes gasket. For models 4830, 5000, 5030, 5100, 5110, 5190, 5200, 5340, 5530, 5600, 5610, 5640, 5700, 5900, 6000, 6000 Commander, 6410, 6600, 6610, 6640, 6700, 6710, 6810, 7000, 7010, 7100, 7200, 7410, 7600, 7610, 7700, 7710, 7740, 7810, 7840, 7910, 8000, 8010, 8210, 8240, 8340, 8400, 8530, 8630, 8700, 8730, 8830, 9000, 9200, 9600, 9700. (Part No: C5NN9030D) $9.90

Fuel Filter - Pkg of 6 - Package of 6 filters. Filter height is 2 7/8" Fits the following Diesel tractors 1965 & newer: 2000, 3000, 4000, 5000, 7000, 8000, 9000. INDUSTRIALS 1973 & newer: 650, 750, 7500 (Part No: EDPN9N074AA) $26.50

Fuel Filter Assembly, Double - Fits most Ford Diesels 1965 & newer that use CAV type double filter assembly. Replaces C5NN9165C and D2NN9165C. (Part No: S.60426) $50.06

Fuel Filter Assembly, Single - For Diesel tractors using CAV type injection system. (Part No: S.60425) $29.93

Fuel Filter, CAV type - For models (6500, 750, 7500, 650 all from 1973 and up), (2000, 3000, 4000, 5000, 7000 all from 1965 and up), (8000, 9000 both from 1968 and up). Replaces EDPN9N074AA. NOTE: verify you have CAV type filter before ordering. (Part No: S.00296) $5.86

Fuel Injection Pump - For models 5000 after 11/72, 6600 and 6700 after 12/76, 650 after 12/77. Replaces CAV3249F951. To replace original pump # 3249F951. To ensure proper fit and function, CAV number must match exactly. (Part No: D4NN9A543F) $696.02

Fuel Injector Seal Kit - For (1) injector on: Post 1965 tractors with 3 cylinders (Part No: C5NE9F596A) $4.99

Fuel Pump - For models (2000, 3000, 4000, 5000 1965 and up), 2100, 2110, 2120, 2150, 2300, 231, 2310, 2600, 3055, 3100, 3120, 3150, 3190, 3300, 3310, 3330, 335, 3400, 3600, 4100, 4110, 4190, 4200, 4330, 4340, 4400, 4410, 4600, 5000, 5100, 515, 5190, 5200, 531, 5340, 5500, 5550, 6600. All with gas engines. (Part No: F2NN9350AA) $40.28

Fuel Sending Unit - For models 5000, 5100, (5110, 5610, 5900, 6410, 6610, 6810, 7610, before 11/1983), 5600, 6600, 7000, 7100, 7600. (Part No: D8NN9A316JA) $47.31

Fuel Shut-Off Cable - Sizes available are: 48" (3-cyl, 65>), 55" (4-cyl, 65>), 63" (6-cyl, 76>), and 82" universal. SPECIFY SIZE NEEDED IN 'COMMENTS' WHEN ORDERING. (Part No: SHUTOFFCABLE) $14.95

Fuel Shut-Off Cable - Cable assembly, fuel shut-off, 63" long. For diesel tractors 2000, 3000, 4000, 5000, 7000, (1965 to 1975); 2600, 3600, 3900, 4100, 4600, 5600, 6600, 7600, 233, 333, 335, 515, (1975 to 1981); 4610, 5610, 6610, 7610, 7710, with quiet cab (1981 to 1991). (Part No: E5NN9C331EA) $14.62

Fuel Tank - For Diesel 5000 (with CAV injection pumps, 1965-1975), 5600, 6600, 7600 (1975-1981). (Part No: D0NN9002B_) $157.70

Fuel Tank Valve Tap - Metal Fuel Tap with screen for gas gas and diesel: Major, Super Major, 2000 (1965 up), 2310, 2600, 2610, 2810, 2910, 3000, 3230, 3430, 3600, 3610, 3900, 3910, 3930, 4000 (1965 up), 4100, 4110, 4130, 4600, 4610, 4630, 5000, 5600, 5610, 5700, 5900, 6600, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 9000, 9600, 9700, TW10, TW20, TW30. INDUSTRIALS: 550, 555A, 555B, 655, 655A. (Part No: E2NN9N024AA) $10.38

Fuel Tank, Diesel - For Diesel Models: 5000 with CAV injection pumps (1965-1975), 5600, 6600, 7600 (1975-1981), 5610, 6610, 7610. (Part No: D8NN9002HA) $157.71

Fuel Transfer Pump - 2-bolt - Mounts to injection pump. For Super Major (8-61/64), 2000, 2100, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3120, 3230, 3300, 3310, 3400, 3500, 3600, 3610, 3910, 4000, 4100, 4410, 5000, 5100, 5110, 5200, 5610, 6600, 6610, 7000, 7100, 7200, 7610, 7710. Fuel Tranfer Pump. Used on 3, 4 and 6 cylinder diesel engines. Replaces D8NN9350AA. (Part No: D8NN9350AB) $36.90

Injector - New Diesel fuel injector. For models 4000, 4110, 4140, 4190, 4330, 4340, 4400, 4410, 4500, 5000, 6000. Replaces D1NN9F593A, C7NN9F593BB. (Part No: C5NE9F593C) $50.64

Injector - New Fuel Injector. For Models: 2000, 2110, 2120, 2300, 2310, 3000, 3055, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 5000, 5190, 5340, 5500. Replaces C5NE9F593B, C5NE9F595A, C5NE9F595B, D0NN9F593AR, D0NN9F593ARDS, 81825599. (Part No: D0NN9F593A) $56.92

Injector Pump Repair Kit - Fits: CAV 3, 4, 6 cylinder rotary pumps only. Replaces OEM # CAV7135-110. (Part No: CAV7135-110) $39.30

Pre-Cleaner Assembly - For models 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 3910, 3910H, 4000, 4110, 4600, 4610, 4610H, 4830, 5000, 5030, 5110, 5600, 5610, 5700, 5900, 6600, 6700, 6810. Pre-Cleaner Assembly. 6.89" Bowl Diameter, 2.362" Inlet Dia, 3.937" Body Height. (Part No: 81823388) $33.87

Gauges
Instrument Cluster - Complete Instrument Cluster For 2000, 3000, 4000, 5000, 7000 (1965 to 1975). Does not come with mounting seal. (Part No: EHPN10849A) $159.90

Tach Drive - Generator Tach Drive Assembly For all C7NN10000C generators on 2000, 2110, 3000, 3400, 3550, 4000, 4200, 4400, 4500, 5000, 5200, 6000, 7000, 8000. (Part No: C5NF17B282B) $30.42

Tach Drive - Tachometer drive assembly used on a Tisco alternator conversion kit part #6X10300ALTH. For 2000, 3000, 4000, 5000, 6000, 7000 (Part No: 6X10299TD) $56.42

Tach Drive Gear - For models 2000, 2110, 3000, 3400, 3550, 4000, 4200, 4400, 4500, 5000, 5200, 6000, 7000, 8000. (Part No: C5NF17373B) $7.66

Hitch / Drawbar
Drawbar - Swinging drawbar 37-1/2" O.L. For 5000, 7000. (Part No: C5NN805A) $162.93

Drawbar - 36.90" long. For models 5000, 7000, 5600, 6600, 7600, 6700, 7700, 5610, 6610, 7610, (7710 with 2 spd PTO), TW15, TW25, TW35. (Part No: E0NN805AC) $108.11

Gear, Leveling Box - For models 5000, 7000, 8000, 8700, 9000, 9600, 9700, 5600, (5610, 6610, 6710, 6810, 7610, 7710, 5900 up to 12/82), 6600, 6700, 7600, 7700, TW10, TW20, TW30. Part # 4 in the picture. (Part No: C7NN568B) $27.76

Leveling Box - Box assembly, leveling Right Hand, adjustment is 25" to 31". For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: D2NNN983AWF) $179.10

Leveling Box Assembly - With Hand Crank for Models 5000, 6600, 7000, 7600, 6610, 7100, 7200, 5600, 5100, 5200, 6700, 5700, 5340. (Part No: D2NN983A) $179.86

Leveling Rod - Leveling rod and yoke, Left Hand. For models 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 7910. (Part No: C5NNB863C) $70.08

Rod Leveling - Leveling rod assembly, Left Hand, adjustment is 27" to 33". For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: C5NNB863CWKF) $116.55

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly.For models 2000, 2310, 2600, 2610, 3000, 3600, 3610, 4000, 5000, 765, Dexta, Super Dexta. (Part No: 49A93) $45.48

Stabilizer Kit Left Bracket - Single chain assembly; does not include brackets or U-bolt. For models 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: CFPND936B-LB) $49.46

Top Link - Top Link, Cat. II both ends, adjusts 24-3/4" to 34-3/4". (Part No: D0NN576A) $82.24

Top Link Rocker - For 5000 1969 and up, 7000, 5900, (5600, 6600, 6700, 7600, 7700 with single speed PTO), (6610, 6710, 6810, 7610, 7710 with 3 Pins). Also Replaces E0NN535CA (Part No: C7NN535A) $119.50

Hydraulic System
Clamp - Double break-away clamp. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 5900, 600, 6600, 700, 800, 900 (Part No: 9006-4) $30.56

Clamp Double - Double break-away clamp. For models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: 5006-4) $24.14

Clamp, Double Break-Away, Hydraulic - For use with Pioneer series 4000 & Safeway type S20-4 & S40-4 couplers. Quik-cover assembly HV4957 fits this clamp. Used on tractors with single pump hydraulic system, 1955 thru 1981 models. For models 500, 600, 700, 800, 900, 2000, 3000, 4000, 5000, 2600, 3600, 4600, 5600, 6600. (Part No: S42-4) $27.88

Cover Rep Kit - Master repair kit, for hydraulic lift cover. For 5000, 7000 (Part No: LCRK57) $26.14

Cylinder, Side Link - Side link hydraulic cylinder. (Part No: HSL3201) $258.70

Cylinder, Top Link - Top link hydraulic cylinder. (Part No: HTL3101) $302.98

Driveshaft - Intermediate shaft, oil pump drive. For models 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600. (Part No: C7NN6A605A) $19.92

Gasket - Gasket, hydraulic lift cover. For (1965-1975): 5000, 7000. (Part No: C5NNA967B) $17.36

Hose Bracket - Hydraulic Hose Coupler Bracket. For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 5900, 600, 6600, 700, 800, 900. (Part No: D6NND916D) $43.68

Hydraulic Adapter Kit - Adapter plate kit. Contains 1-HV4901 adapter plate, mounting cap screws, o-rings and mounting instructions. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900 (Part No: HV4902) $44.04

Hydraulic Filter Kit - Power Steering Filter - Power steering filter for pump reservoir. For 2000, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 4830, 5000, 5030, 515, 530A, 531, 532, 5600, 5610, 5610S, 5700, 5900, 6600, 6610, 6610S, 6700, 6710, 7000, 7600, 7610, 7610S, 7700, 7710, 7810S, 7910, 8000, 8210, 8530, 8630, 8700, 8730, 8830, 9000, 9700, TW10, TW15, TW20, TW25, TW30, TW35, TW5 (Part No: EDPN3K758A) $10.90

Hydraulic Hose Assembly - Hose, 12. For models 2000, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: H31-2M-12) $11.94

Hydraulic Lift Cover Repair Kit - For models 5000, 7000. (Part No: S.67550) $24.78

Hydraulic Pump - For models 5000, 5100, 5200, 7000, 7100, 7200. ALL with Dual Power. (Part No: D2NN600B) $895.18

Hydraulic Pump - Fits 5000, 5100, 5200, 7000, 7100, 7200 all 1965-1975 with transmission mounted pump. Hydraulic Pump. (R3568) (Part No: D0NN600G) $376.65

Hydraulic Pump Drive Gear - For models 4000, 5000, 7000. (Part No: C5NN866A) $44.72

Hydraulic Pump Safety Valve - For (4000, 5000, 7000), (Major, Super Major, Power Major all 1952-1964. Hydraulic Pump Safety Valve. (Part No: E1ADDN984) $29.36

Hydraulic Relief Valve - For models 2000, 3000, 4000, 5000, 6000 (1965-1975). This valve is for piston or gear type in center housing. (Part No: C7NN638E) $86.06

Hydraulic Strainer & Tube - Fits 5000, (5900 1/85 to 11/87). Less Dual power. (Part No: C5NNN994J) $26.16

Hydraulic Valve Kit - Valve, hydraulic, with handle, single-spool multi-valve. No relief, tandem (4-way) spool, convertible to 3-way, spring center to neutral, with 90 rotated handle. (Part No: HV4012) $142.76

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, one-spool tandem (4-way) float position with spring center to neutral and one spool tandem (4-way) spring center to neutral. (Part No: HV4021) $312.96

Hydraulic Valve Kit - Kit assembly, includes 2-spool valve with handle. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: HV4120) $578.80

Hydraulic Valve Kit - Kit assembly, includes 2-spool valve, valve box with handles. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: HV4122) $629.55

Hydraulic Valve Kit - Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. (Part No: HV4020) $294.91

Hydraulic cylinder Kit - 2-spool valve and cylinder kit complete. For models 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900 (Part No: HCKF262) $984.95

Hydraulic cylinder Kit - 3-spool valve and cylinder kit complete. For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900 (Part No: HCKF263) $1154.84

Hydraulic hose Assembly - For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: H31-SPL-26) $41.79

Hydraulic hose Assembly - Hose, Hose Assembly 1/4 NPTM solid. (Part No: HV4981) $53.80

Lift Cylinder Safety Valve - Hydraulic Lift Cylinder Safety valve. For 4000, 5000, 7000, Major (Part No: DDN984) $43.65

Male Tip - Male tip-check valve assembly, implement half. For 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 6700, 7000, 7600, 7700, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30 (Part No: D5NNB964A) $10.54

Valve - Valve, single-spool, pressure detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: D9NNB950BB) $674.26

Valve - Valve, single-spool, (non-detent/spring centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: E1NNB950AB) $469.64

Valve - Valve, double-spool, (non-detent/spring centering) less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: E1NNB950BB) $695.60

Valve - Valve, double-spool, pressure detent, less handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: E2NNB950CA) $858.24

Valve 1SP With H - Kit assembly, includes 1-spool valve (pressure detent) and handle & valve mounting kit. For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: D9NNB950BB-KIT) $691.59

Valve Adapter Kit - Hydraulic Valve Adapter kit. Can replace OEM adapter plate 9613790. Adapter plate in HV5902 kit features three ports: (1) pressure port, (1) power-beyond port and (1) return port. All ports 3/4" - 16 ORB. Kit contains adapter plate, o-rings, mounting bolts, plugs, and in For 2000, 230, 231, 233, 234, 2600, 3000, 333, 334, 335, 340, 3600, 4000, 420, 445, 4600, 5000, 500, 515, 530, 532, 535, 545, 5600, 600, 6600, 700, 800, 900. (Part No: HV5902) $88.84

Valve Handle - Handle with blue vinyl coated grip, for 1 & 2 spool valves. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900 (Part No: D3NNB936A) $26.52

Valve Kit, 1 Spool - Kit assembly, includes 1-spool valve (pressure detent), hoses, dust cover, couplers, handle & valve mounting kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: DGPNB950K1-KIT) $906.74

Valve Kit, 1 Spool - Kit assembly, includes 1-spool valve (non-detent/spring centering) and handle & valve mounting kit. For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: E1NNB950AB-KIT) $505.22

Valve Kit, 1 Spool - These kits include single spool valve(non-detent/spring centering), hoses, hose couplers, coupler bracket, self closing dust covers and handle mounting kit. Valves are current OEM design and bolt to tractor top hydraulic cover in place of accessory plate. Control handles are operated from RH side of operators seat. For models 500, 600, 700, 800, 900, 2000, 3000, 4000 all 1965 and before. 2000, 3000, 4000, 5000 all 1965-1975. 2600, 3600, 4600, 5600, 6600 all 1975-1981. 2610, 3610, 4610 equipped with single pump hydraulic system, all 1981 and up. (Part No: DGPNB950S1-KIT) $728.34

Valve Kit, 2 Spool - Kit assembly, includes 2-spool valve (pressure detent), hoses, dust cover, couplers, handle & valve mounting kit. For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900. (Part No: DGPNB950K2-KIT) $1166.03

Valve Kit, 2 Spool - Kit assembly, includes 2-spool valve (non-detent/spring centering) and handle & valve mounting kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: E1NNB950BB-KIT) $731.19

Valve Kit, 2 Spool - Kit assembly, includes 2-spool valve (pressure detent) and handle & valve mounting kit. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: E2NNB950CA-KIT) $977.76

Valve Kit, Double Spool Valve - Kit assembly, includes double spool valve (non-detent/spring centering), hoses, dust cover, couplers, handle & valve mounting kit. Valves are of current OEM design and bolt directly to tractor top hydraulic cover in place of accessory plate control handle are operated from RH side of operators seat. For models 500, 600, 700, 800, 900, 2000, 3000, 4000 all 1965 or before, 2000, 3000, 4000, 5000 all 1965-1975, 2600, 3600, 4600, 5600, 6600 all 1975-1981, 2610, 3610, 4610 all equipped with single pump hydraulic system 1981 and up. (Part No: DGPNB950S2-KIT) $1061.07

Valve Less Handle - Valve, 2-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral, less handles. (Part No: HV4023) $267.06

Valve Less Handle - Valve, 3-spool, 2000 psi. Relief, tandem (4 way) spool, spring center to neutral, less handles. (Part No: HV4033) $636.12

Valve Mount Kit - Handle & valve mounting kit, single-spool. For models 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 500, 5600, 600, 6600, 700, 800, 900. (Part No: 309972F) $40.40

Lights
Headlamp Assembly, 12 Volt, Blue - (Single) 12-volt, metal body & bezel, blue enamel finish, 5-3/4" diameter for the following tractors: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 801, 901 (1958-1962), 2000, 3000, 4000, 5000, 7000 (1965-75). Does not match original. (Part No: 310068) $61.36

Headlight Switch - For 2000, 3000, 4000, 5000, 7000, all 1965-1975. For 2600, 3600, 4600, 5600, 7600, all 1975-1981. For 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, all 1981-8/1985. For 5110, 5610, 6410, 6610, 6710, 6810, 7610, 7710, all 1981-8/1985, 7910, 8210, both 1983-8/1985. Replaces C5NN11654C, D6NN11N650A, EDPN11654AA. Headlight Switch and nut (Part No: 251405) $23.27

Miscellaneous
Heater Cab, Custom Tailored - Work comfortably in cold weather, easy to install for years of trouble free service. Made of heavy duty mildew resistant canvas fabric, sturdy metal parts specially treated to stand up under the severest weather conditions, oversize windshield of heavy gauge vinyl electrically sealed over frames - tilts for added versatility and custom fit to your tractor. For model 5000 all purpose 1965 thru 1967 with shell fenders. (Part No: 1212760) $306.02

Spring - Feathering spring, heavy duty, .243" thick. For 5000, 7000 (Part No: C9NNP733A) $42.17

Spring - Feathering spring, standard, .165" thick. For models 5000, 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810S. (Part No: D3NNP733A) $30.27

Oil System
Dipstick, Engine Oil - Length is approx 6 1/2" from the base of cap to end. For models 2000, 2100, 2110, 2120, 2150, 2300, 2310, 3000, 3055, 3100, 3120, 3190, 3300, 3400, 3500, 3550, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 4500, 5000, 5100, 5190, 5200, 5340, 5500, 650, 6500, 7000, 7100, 7200, 750, 7500, 755, 755A, 755B. (Part No: C5NE6750D) $6.49

Filter Adapter, Spin-On - With Seal. Fits 2000, 3000, 4000, 5000 (Tractors from 1965 to 10/1969). For use with Spin On Filter E7NN6714AA. (Part No: 309825) $36.81

Oil Filler Cap - Cap, oil filler. For 2000, 3000, 4000, 5000, 7000 (Part No: D0NN6766A) $6.94

Oil Filter - Engine oil filter, cartridge element, 2 quart. For 3, 4 & 6 cylinder engines (1965 to 1979) on: 2000, 3000, 4000, 5000, 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20 (Part No: DGPN6731A) $12.90

Oil Filter - Spin-On Type. For models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 3000, 4000, 5000, 2600, 3600, 4600, 5600, 6600, 2610, 3610, 4610, 5610, 6610. Also replaces, 86546614 and D9NN6714EA. (Part No: E7NN6714AA) $6.82

Oil Filter, Spin-On - Fits Tractors from 1965 to 10/1969. For use with Spin On Filter Adapter 309825.(40538S) (Part No: E7NN6714AA) $6.20

Oil Pressure Switch - For models 2000, 3000, 4000, 5000, 7000, 8000, 8600, 8700, 9000, 9600, 9700, 2600, 3600, 3900, 4100, 4600, 5600, 5900, 6600, 6700, 7600, 7700, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5610S, 6610, 6610S, 6710, 6810, 7610, 7610S, 7710, 7810, 7810S, 7910, 8010, 8210, 3230, 3430, 3930, 4130, 4630, 4830. Replaces 81873524, F1NN9278AA, D8NN9278AA. (Part No: D8NN9278BD) $5.10

Oil Pump with screen - Complete oil pump assembly with lower screen.For 2000, 3000, 4000, 5000, 7000, 2600, 3600, 3900, 4100, 4600, 5600, 5700, 6600, 6700, 7600, 7700, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 2310, 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 3230, 3430, 3930, 4130, 4630, 4830, 5030. Replaces E1NN6600DA. (Part No: E1NN6600DD) $66.16

Pump Gear/Shaft Assembly - Gear & shaft assembly, oil pump drive. For 2000, 230A, 2310, 231, 233, 234, 2600, 2610, 2810, 2910, 3000, 3230, 333, 334, 335, 3430, 3600, 3610, 3900, 3910, 3930, 4000, 4100, 4110, 4130, 420, 4600, 4610, 4630, 5000, 5030, 515, 531A, 532, 535, 5600, 5610, 6600, 6610, 6710, 7000, 7600, 7610, 7700, 7710, 7810, 8000, 8700, 9000, 9700, NAA (Part No: E9NN6A820AA) $42.20

Seal, Oil Filter Adapter - 2 quart to 1 quart spin on or use 309825. For models 2000, 3000, 4000, (5000 1965-10/1969). (Part No: D8NN6N818AA) $9.92

PTO / Driveline
Clutch Pack Assembly, Independent PTO - Includes 3 discs & 3 plates. For models 5000, 7000. (Part No: D5NNN751D) $295.79

Clutch Pack Assembly, Independent PTO - Includes 4 discs & 4 plates. For models 5000, 5600, 5900, 6600, 7000, 7600, 7700. (Part No: D2NNN751D) $317.30

PTO Drive Clutch Hub - For 5700, 5900, 6410, 6810, 7410, 7810, 7910, 8210, (5000, 7000, both 1965 and up with Single/Two Speed), (5600, 5610, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710, all with Single/Two Speed). PTO Drive Clutch Hub replaces D2NNN750A. For models with 8 or 10 Plate Ind. PTO Clutch. 25 Teeth and 52 Teeth. (Part No: E0NNN750AA) $137.09

PTO Drive Plate - Drive Plate, 15 spline, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: C5NNN777A) $45.21

PTO Drive Shaft - Shaft, 15 teeth, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: C5NN7A684AA) $163.40

PTO Drive Shaft - PTO Drive Shaft - Shaft, 20 teeth, PTO drive. For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: E4NN7A684AA) $234.92

PTO Friction Disc - PTO friction disc with internal splines, single-speed. For models 5000, 7000 (1965-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (single- & 2-speed, 1981 & up), 8000 (10/1969-1978), 9000 (1969-1978). (Part No: D1NNP743A) $17.24

PTO Friction Disc - PTO friction disc with internal splines. Used on PTO with 2-speed transmission. For models 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 7600 (single- & 2-speed, 1975-1981). (Part No: D3NNP743A) $17.24

PTO Shaft - For models 5000, 6000, 6610 all with single SP PTO. PTO Shaft is 25.4" Long, 21 & 25 Spline. (Part No: C5NNA701A) $134.31

PTO Shaft - For models 5100, 5200, 7100, 7200, (5000, 7000 both with ind. PTO 1965-1973). PTO Shaft 540 RPM. 10.89" Long, 29 Tooth Drive Splines. (Part No: D2NNN752C) $72.98

PTO Shaft Support - Support, for PTO shaft and drive clutch valve. For models 5000, 7000. (Part No: C7NNN776C) $39.50

PTO Shaft Support - Support, for PTO shaft and drive clutch valve. For models 5000, 5600, 5610, 5700, 5900, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. (Part No: D2NNN776A) $34.22

PTO Shaft, 540 RPM - 1 3/8" 6 spline Shaft, PTO drive output, 540 rpm. For models 5000, 5600, 5610S, 5610, 5700, 6600, 6610S, 6610, 6700, 6710, 7000, 7600, 7610S, 7610, 7700, 7710, 7810, 7910, 8210, 8670, TW5, TW15, TW25, TS90, TS100, TS110, TW10, TW20. (Part No: E6NNB728AA) $145.18

PTO Shaft, Rear Lower - Shaft, PTO rear lower. For single-speed 540 rpm independent PTO drive shaft. Tractors: 5000, 7000 (6/1973-1975), 5600, 5700, 6600, 6700, 7600, 7700 (1975-1981), 5610, 6610, 6710, 7610, 7710 (1981-9/1989), 5610S, 6610S, 7610S (1/1994-12/1994). Replaces D2NNN752B, E3NNN752AA. (Part No: E4NNN752AA) $60.10

Seats
Seat Assembly - Bucket seat with arm rests in blue vinyl. For models 2000, 3000, 4000, 5000, 7000. (Part No: R1263) $358.61

Seat Back - Blue Vinyl on Steel For 4330, 4340, 4410, 4500, 4600, 4610, 5000, 5110, 5200, 5340, 5600, 5610, 5700, 5900, 6410, 6600, 6610, 6700, 6810, 7000, 7100, 7200, 7600, 7610, 7700 (Part No: R0862) $144.96

Sheet Metal / Body Parts
BUMPER - Fits models: 4000, 5000, 7000, 5600, 5900, 6600, 7600. Replaces C5NN17750C. Price includes additional shipping charges due to weight. (Part No: S.61053) $146.37

Battery Hold Down - Bolt with nut. For models 2000, 3000, 4000, 5000. (Part No: C5NN5161CWN) $10.52

Battery Tray - Battery tray 19-1/2" by 8-1/2" For models (2000, 3000, 4000, 5000 1967 and up with 128 amp battery), 2100, 3600, 4100, 4600, 5110, 5610, 5900, 6410, 6610, 6810, 7610, 7810. INDUSTRIALS: 223, 250C, 260C, 333, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 450, 455D, 540, 540A, 540B, 545, 545A, 545C, 545D. Also replaces D6NN10723E, D3NN10723A AND C5NN10723M. (Part No: E4NN10723AA) $75.64

Battery Tray, DIESEL - Fits the following DIESEL tractors from 1965 to 1967: 2000, 3000, 4000, 5000. INDUSTRIALS: 2110LCG, 3400, 3500, 3550, 4110LCG, 4400, 4500 (all 65-67). (Part No: C5NN10723H) $92.58

Grill Assembly, Front - Metal 2-piece grill for 2000, 3000, 4000, 5000 (65-4/68). (Part No: C5NN8A163A) $98.15

Grill Insert Upper - For models 2000, 3000, 4000, 5000(1971-1975), 4200(1971-1975), 5200, 7200(1968-1975), will not fit 3400 and 3500. This is a plastic insert with FORD letters. (Part No: C9NN8A163AG) $25.23

Grill Kit (Plastic) - Grill Kit For 2000, 3000, 4000, 5000. Grill For Three And Four Cylinder Tractors (1965-3/68). Without headlight holes. Contains 1 TOP section containing FORD lettering (OEM #C9NN8A163AG)and 1 bottom section (OEM #D1NN8151A), and 2 studs and 2 clips for mounting lower section. Top section is mounted using sheet metal screws (not supplied). (Part No: D1NN8151A-KIT_) $55.58

Grill Panel, Upper - Aluminum. Look like part number C9NN8A163AG but does not come with FORD emblem (available separately #S.61520 $23.00). Bare metal. For models 2000, 3000, 4000, (5000 1968-1/1970). (Part No: C7NN8150G) $101.51

Grill Screen - 20.625" wide, 15.500" high. Upper grill screen For Three And Four Cylinder Up To 1965-3/1968. For models 2000, 2100, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3400, 4000, 4100, 4110, 4140, 4190, 4200, 4330, 4340, 4400, 5000, 5100. (Part No: C5NN8202AA) $77.76

Grill, Bottom - Plastic For 2000, 3000, 4000, 5000, 7000 (4/68>). (Part No: D1NN8151A) $21.40

Grill, Front, with Inset Headlights - For models (2000, 2110, 2120, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3500, 3550, 4000, 4100, 4110, 4140, 4330, 4340, 4400, 4500, 5000, 5100 all built between 1/1965 to 12/1974), (2150 from 1/1970 to 12/1974), (3400 from 1/1965 to 9/1975), (4410 from 1/1969 to 12/1974), (5340 from 6/1968 to 12/1974), (7000, 7100, 7200 from 10/1971 to 12/1974). (Part No: D1NN8151B) $71.32

Hood Handle - Handle assembly, engine hood Right Hand side. For 2000, 231, 2310, 233, 2600, 2610, 2810, 2910, 3000, 3230, 333, 335, 3430, 3600, 3610, 3900, 3930, 4000, 4110, 4140, 420, 4600, 4610, 4830, 5000, 5030, 515, 531, 532, 535, 5600, 5610, 5910, 6600, 6610, 7000, 7600, 7610 (Part No: D6NN16N644A) $13.00

Radiator Cover - For models 4000, 5000 both after 1968. Does not have hole for Air Cleaner. (Part No: C5NN8N202L) $291.56

Rubber Hood Pads - **ENTER 10 in QTY. For all models after 1965 with front cowling that surrounds the grill/radiator. These rubber pads fit onto cowling under hood. **Must be ordered in quantities of 10.** Priced each. (Part No: C5NN16N655B) $0.90

Steering
Ball Bearings, Steering Gear - Package of 20, used with E1ADKN3556 ball race. 14 used for main nut, 10 used in upper shaft bearing, 10 used in lower shaft bearing. For models Major, Super Major, 2600, 2610, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Replaces 353075S. (Part No: 83424343) $7.60

Bushing - Bushing, 1.38 long, for power steering center arm pivot shaft, lower bushing. For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3179B) $10.42

Center Arm - Center arm, for power steering pivot shaft For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: D6NN3N670A) $125.82

Drag Link - Drag link for power steering, 50.50" center post to center post. For 5000, 5600, 6600, 7000, 7600 (Part No: E0NN3304CA) $102.53

Drag Link End - End, rear, 1.00"-16, for drag link with power steering 3.75" to center of post. For 5000, 7000, 8000, 8200, 8600, 9000, 9200, 9600 (Part No: E3NN3307AA) $30.77

Front Axle Pin, Front - Front axle pin, front, manual or power steering. For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3N159A) $48.13

Front Axle Pin, Rear - 1.250" O.D., 5.150" long, manual or power steering. For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3N160A) $26.10

Front Axle Support - Bushings Included. For models:(5000 from 9/1970 and up), 7000, 5600, 5900, 6600, 7600, 5610, 6610, 7610. ** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: E5NN3029BA) $689.85

Front Socket - End, front, 1.00"-16, Left Hand threads, 3.75" to center of post, for original style drag link with threaded ends & manual steering. For 5000, 7000 (Part No: C5NN3308C) $29.25

Front Socket - End, front, 1.00"-16, Left Hand threads for drag link with power steering, 3.75" to center of post. For models 5000, 7000. (Part No: E3NN3308BA) $28.70

Nut - Nut, steering wheel retaining. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 7000, 7600. (Part No: D5NN3N602A) $11.30

Power Steering Hose Assembly - Flexible power steering hose designed to replace regrid Ford tube assemblies. 54" long, 3/8" I.D. SAE 100 R1A single wire braid hose with 5/8"-18 thread 45 SAE flare female swivel on one end, 5/8"-18 thread SAE straight inverted flare on other. For models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600, 7000, 7600. (Part No: FPH54) $42.63

Power Steering Kit - For Ford 5000. Kit Includes Oil reservoir, pump, hyraulic steering assembly, hoses and simple instructions. Not to be used with front end loaders. (Part No: S.60749) $611.36

Power Steering Pump - For models 2000, 2100, 2110, 3000, 3100, 4000, 4100, 4110, 4500, 5000, 5100, 5200, 535, 7000, 7100, 7200. Also replaces 81816585. (Part No: C7NN3A674F) $499.90

Power Steering Pump - For (2000, 3000, 4000, 4500, 5000 all 1965-1974)(3055, 4140 all 1970-1974)(3150 1970- 11/1975)(3500 1965-1971)(7000 10/1971-1974). Power Steering Pump. (Part No: D8NN3K514KC) $924.87

Power Steering Pump - For models 5000 1965-9/1968, 4200, 5200, 7200 Rowcrop 1966-1973. Power Steering Pump with external reservoir. 1100 PSI, 3.5 GPM. 61186S (Part No: C7NN3A674G) $718.36

Power Steering Pump Repair Kit - Kit repairs the following pumps: E6NN3K514EA, D8NN3K514KC, E0NN3K514AB, and E6NN3K514AB. For models (2000, 3000, 4000, 5000 65-9/68), (8000, 8600, 9000, 9600 1/68-2/73), (Industrials 3400, 3500, 4400, 4500 65-4/70). (Part No: DHPN3A674B) $11.49

Power Steering Seal Kit - Orbital control valve and gear box gasket and seal kit. For models (4000, 5000 from 7/1970 and up), 4600, 5600, 6600, 7000, 7600. Replaces EGPN3N503AA. (Part No: EDPN3500A) $17.64

Rod Pivot - Pivot for hydraulic control valve handle. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 500, 5000, 5600, 600, 6600, 700, 800, 900 (Part No: C9NND912A) $28.62

Shaft - Pivot shaft for center power steering arm, 4.28" long. For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C5NN3N703C) $33.63

Spindle Bushing Kit - For models 5000, 5600, 5610, 6600C, 6600, 6610, 6710, 7000, 7600C, 7600, 7610, 7710. (Part No: SBK6581) $27.36

Spindle Thrust Bearing - For 2310, 2600, 2610, 2910, 3430, 3600, 3610, 3910, 3930, 4000, 4110, 4130, 4200, 4600, 4610, 4630, 4830, 5000, 5030, 5100, 5600, 5700, 6600, 6700, 7000, 7100, 7600, 7700 (Part No: C5NN3A299A) $14.62

Spindle, LH - For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses bushing kit SBK6581. Uses Front Wheel Hub Part # C9NN1104D. Also uses Wheel Bearing Kit Part # WBKFD6. (Part No: C5NN3106J) $124.24

Spindle, RH - For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. Uses bushing kit SBK6581. Uses Front Wheel Hub Part # C9NN1104D. Also uses Wheel Bearing Kit Part # WBKFD6. (Part No: C5NN3105M) $114.05

Steering Arm Right Hand - For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7700. Right Hand steering arm used with D2NN3105C, C5NN3105M, C7NN3105D. (Part No: C5NN3130J) $40.67

Steering Column Grommet - For models 2000, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6000, 6600, 7000, 7600, 2310, 2610, 2810, 2910, 3010, 3110, 3310, 3610, 3910, 4010, 4110, 4410, 4610, 5010, 5110, 5610, 5910, 6410, 6610, 6710, 6810, 7010, 7310, 7410, 7610. 2-7/8" O.D. X 1-1/4" I.D. (Part No: D2NN3A566B) $4.68

Steering Gear Assembly - For models 5000 (1965-8/1970) with Power Steering. (Part No: C5NN3503E) $628.45

Steering Gear Assembly, Manual - Manual steering assembly fits: 5000, 5600, 5610, 5900, 6600, 6610, 7600. (Part No: D7NN3503A) $673.65

Steering Shaft & Nut Assembly - LH spiral. For model 5000 1965 to 8/1970 with power steering. (Part No: C5NN3A710A) $164.59

Steering Wheel - Steering wheel, 18" O.D., 36 Spline, .785" Shaft Diameter 3 Ruberized Plastic covered spokes. For 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600. Can replace OEM # 82016841. (Part No: D6NN3600B) $42.04

Steering Wheel - 17-5/8" dia., 11/16" splined hub, 3 covered spokes. For models 231, 335, 340, 445, 530, 540, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4000SU, 4400, 4500, 4600, 4600SU, 4610, 5000, 5100, 5200, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600, 7610. (Part No: C5NN3600C) $40.78

Tie Rod End - End, tie rod, Left Hand outer, 17.500" to center of post. For models 5000, 5600, 5610, 660, 6610, 7000, 7600. (Part No: C7NN3280F) $27.95

Tie Rod End - End, tie rod, Right Hand outer, Right Hand threads, 4.250" to center of post. For models 5000, 5600, 5610, 6600, 6610, 7000, 7600. (Part No: C7NN3289E) $43.05

Tie Rod Inner - End, Right Hand inner, 1.00"-16 thread, for tie rod with power steering, 3.75" to center of post. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 (Part No: C7NN3289D) $27.23

Tie Rod Inner - End, Left Hand inner, for tie rod with power steering, 18.125" to center of post. For models 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610. (Part No: C7NN3B161A) $39.06

Tie Rod Outer - End, Right Hand outer, 15.375" to center of post, for tie rod with power steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 (Part No: C7NN3280E) $35.99

Tie Rod Outer - End, Left Hand outer, 15.375" to center of post, for tie rod with power steering. For 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610 (Part No: C7NN3281A) $37.05

Wheels
Bearing Cone - BEARING CONE For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 (Part No: LM501349) $8.60

Bearing Cone - Bearing, Tapered Cone For 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7600, 7610, 7700, 7710 (Part No: WAA4221A) $8.60

Front Wheel Bearing Kit - For models (5000, 7000 1972 and up with 8 x 16 wheel), 8000, 8600, 8700, 9000, 9600, 9700, (TW10, TW20, TW30 less heavy duty), (5610, 6610, 6710, 7610, 7710, 10/1989 and up heavy duty axle), 3400, 3550, 4400, 4500, 335, 340, 340A, 340B, 345C, 345D, 420, 445, 445A, 445C, 445D, 515, 535, 540, 540A, 540B, 545, 545A. NOTE: check bearing and cup numbers before ordering. Replaces 8L4221/312518, 25590-25520 for inner bearing and cup, 312520/312548, 02474/02420 outer bearing and cup, E4NN1190AA seal. (Part No: S.67455) $28.08

Front wheel bearing kit - Kit contains one each: LM501349(Cone), LM501310(Cup), M12649(Cone), M12610(Cup), 203030UB(Seal). Repairs one wheel. For models 5000, 5600, 5610, 5700, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710. Fits hub C9NN1104D. (Part No: FW96WS) $26.20



Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4" throat, 1/8" dia. rivet punch. (Part No: RIVET_TOOL) $35.25

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8" deep throat x 2-1/8" high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET) $89.00

Cooling System
Magnetic Block Heater - Universal. 115-120 AC, 180 watts, draws 2 amp maximum. Surface area 2-3/4 inches x 3-3/4 inches, delivers 300-400 degrees surface temperature. (Part No: MBH1153) $56.70

Thermostat Housing to Block Gasket - Tractors: all 4-cyl, 1953-1964, gas and diesel. Sold and Priced as Each. (Part No: EAF8255A) $0.50

Decals and Emblems
Decal, Fear This Ford - 12-1/2 x 3. For all Ford tractors. (Part No: S.67825) $18.80

Sherman Transmission Instruction Plate - For Ford models with Sherman step up step down transmission. Installs under steering wheel nut. (Part No: SHERMAN) $14.95

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088) $9.06

Shift Cover Plate Gasket - For all models with 5-SPEED transmission built between 1955-1964.***Must be ordered in multiples of 5.*** Priced Each. Not for tractors made overseas, such as Major, Dexta, etc. (Part No: NDA7223A) $5.46

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal base bracket mounting kit. For converting from a generator to an alternator . Contains: brackets, bolts, washers, nuts & Basic Instructions. (Part No: 2348258) $39.25

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE) $87.73

Coil - Ignition 12V - Universal coil fits many models. Coil is designed to be used on a 12 volt tractor system. (Part No: D5TE12029AB) $23.02

Coil Bracket - Universal Coil Bracket (Part No: R1940) $6.61

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix 'Flame Thrower' heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40511) $35.99

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix 'Flame Thrower' Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40111) $39.21

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. (Not for 9N, 2N early 8N using front mount distributors) (Part No: 40011) $32.82

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Chrome 'Flame Thrower' high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40501) $35.99

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix 'Flame Thrower' Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40001) $36.89

Coil, Ignition 6V - Standard 6 volt coil. Fits many models. (Part No: D4PE12029AA) $19.95

Coil, Ultra High Performance (Black), Oil Filled - Pertronix 'Flame Thrower II' Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011) $35.25

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix 'Flame Thrower II' Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45001) $39.68

Generator Repair Kit - For 2 brush generators 8N10001, FAC10002A. (Part No: GRK401) $17.34

Spark Plug - Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65) $3.64

Spark Plug - Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85) $3.64

Spark Plug Wire Set, 4 Cylinder, Universal - For use with Ignitor high performance electronic ignition conversion kits. (Part No: S.66442) $14.48

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260) $20.02

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651. NOTE

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718) $25.95

Voltage Reducer with Bracket - 12 volt to 6 volt. (Part No: S.52671) $11.82

Engine Gaskets
Push Rod Side Cover Gasket - For all 4 cylinder gas or diesel models built between 1953-1964. (Part No: EAF6521D) $8.38

Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR) $7.14

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, Oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 F to +500 F, 3.35 oz. tube. (Part No: PRM77BR) $7.86

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicones. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75 F to +700 F, 3 oz. tube. (Part No: PRM101BR) $11.78

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. Its useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152) $6.71

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Cylinder Hone - For bores from 1 1/2 to 3 inches. Easily adjusts. Length of 7 3/4 inches. Comes with stones. Call for replacement stones. (Part No: B1SB1704) $28.83

Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055) $24.95

Piston Ring Compressor - Ratchet mechanism with square drive tool to adjust diameter and enlarged crimped edge to prevent compressor from entering cylinder. Depth 6 1/2 inches. Range 3 1/2 to 7 inches. (Part No: 900521) $35.67

Ridge Reamer - Heavy Duty Ridge Reamer. Removes ridges from the top of the cylinder to achieve smooth wall surface on engine bores from 3 to 5 inches. Tungsten carbide blade is reversible for long life. (Part No: 500560) $63.87

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stacks - Universal. Available from 2 to 5 inch inside Diameter. 48 to 53 inch length. Curved top on all sizes. Extended curver available on some sizes. Priced from $69.95. Single wall construction. Chrome Exhaust Clamps are $5.00 each when ordered with a pipe. Call for pricing for the size you need 800-853-2651 NOTE

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2" x 3-1/4". (Part No: S.43231) $9.90

Choke Cable - Universal choke cable 72 inches long, 7/16 inch thread dia. (Part No: CC72) $15.22

Filter Screen and Gasket for Sediment Bowl - 1-9/16" O.D.. For models (1958-1964 All with 134" engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172" engines up to 126524), 801, 901, 1801. (Part No: ABC346) $4.99

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4, outlet 1/4, O.D. 1-29/32, length 4-1/16. (Part No: 6511393) $6.92

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8, outlet 3/8, O.D. 1-29/32, length 3-7/8. (Part No: BF836) $6.28

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16, outlet 5/16, O.D. 1-29/32, length 4-5/32. (Part No: BF840) $6.22

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16, outlet 5/16, O.D. 2-1/8, length 3-21/32. (Part No: BF7736) $5.94

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043) $29.99

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259) $65.00

Fuel Tank Repair Kit - Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4" long and holes up to 3/8" in diameter. NOT for plastic fuel tanks. (Part No: FTR180) $27.62

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042" thick, 3 foot section. (Part No: FTW494) $8.38

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003) $9.97

Sediment Bowl Gasket - 1-9/16" O.D.. For models (1958-1964 All with 134" engines), 2000 4 cylinder, 501, 601, 701, (1958-1960 all with 172" engines up to 126524), 801, 901, 1801. (Part No: 311275) $1.99

Gaskets
Gasket Material, Cork Rubber - 3/32" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR332) $10.95

Gasket Material, Cork Rubber - 1/16" thick x 12" wide x 24" long. For making general purpose gaskets. (Part No: GSKCR116) $13.75

Gasket Material, Exhaust Manifold - 1/16" thick x 12" wide x 28-1/2" long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228) $19.95

Gasket Paper, .0160 - .0160" x 18" x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844) $14.90

Gasket Paper, .0275 - .0275" thick x 18" wide x 98" long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898) $22.90

Gauges
Ammeter, Black, Flat Bezel - For all models to 1958. Terminal type Ammeter. 30 - 30. Black Ring. Replaces FAD10850A. (Part No: A0NN10670A-BLAC) $10.38

Hour Meter - DC voltages from 12V thru 36V nominal. Heavy duty glass-reinforced polyester body. Internal shock shields & grommets protect movement from shock & vibration damage. Fits 2-1/4" opening, three(3) mounting screws with nuts and two(2) blade terminals included. (Part No: HM771) $43.69

Hourmeter, Analog - 2", black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672) $38.40

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 x 6 ft. copper oil line. Includes 6 Ft 1/8 Line, 2 x 5/16 -24 UNF Nuts, 2x Compression sleeves, and a 1/8-27 NPTF Female to 5/16-24 UNF male adapter. (Part No: UNI523) $22.75

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/8" tube. Brass. (Part No: 919095) $14.35

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8" pipe thread to 1/4" tube. Brass. (Part No: IHS626) $14.35

Oil Pressure Gauge Kit, Universal - Universal Complete assembly with oil tube and mounting hardware, Lighted. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002) $15.95

Temperature Gauge - Universal water Temperature gauge(0-280 degree scale). Fits model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 male adapter, engine block or radiator threaded hole. (Part No: 1042944) $23.85

Temperature Gauge, Universal - For 2" mounting hole. Complete assembly with bracket and adapters for block. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77" capillary line. Fits all liquid cooled engines. (Part No: UTG50) $25.30

Voltmeter, 12 Volt, Lighted Dial - Voltmeter-Gauge has 8V to 16V range, lighted dial, fits 2" diameter hole. For tractors that use 12V electrical system. Chrome bezel with black background, white letters and white pointer. (Part No: VOLT12LT) $23.18

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT) $17.62

Check Chain & Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A) $7.96

Drawbar, Heavy Duty, Heat Treated - Standard Heat Treated Drawbar Red, 30 1/2" L Hole Center To Hole Center, 2 1/2" Wide, 1 1/8" Thick (drawbar fits lift between lift arms). (Part No: 9N5182) $40.38

Drawbar, Standard, Red - Drawbar is 1" x 2-1/2" x 26", with 7/8" pins, (Category I). (Part No: 9N5182A) $40.56

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X) $46.86

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire dia 3/16, length 3.75), four(4) of HP-4 (wire dia 5/32, length 2 15/16), four(4) of HP-5 (wire dia 1/8, length 2 9/16), and three(3) of HP-6 (wire dia 3/32, length 1 5/8). (Part No: HPA15X) $46.86

HITCH BALL 10000LB 2-5/16 - 2-5/16 BALL SIZE, 1-1/4STUD THREAD, 2-1/2 STUD LENGTH, 10000 LB MAX LOAD CAPACIRY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114) $23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 BALL SIZE, 1-3/8STUD THREAD, 2-5/8 STUD LENGTH, 15000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_) $23.40

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834) $12.30

HITCH BALL 3500LB - Hitch ball. 2" ball size, 3/4" stud thread, 1-7/8" stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234) $12.64

HITCH BALL 5000LB - Hitch ball. 2" ball size, 1" stud thread, 2-1/8" stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21) $14.44

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16" ball size, 1" stud thread, 2" stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161) $20.52

LINCH PIN - Package of 10 linch pins. Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14) $4.90

LINCH PIN - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516) $4.00

LINCH PIN - Package of 10 linch pins. 7/16" dia. pin x 1-3/4" useable length, 1-5/8" dia. ring. Enter 1 for package of 10. (Part No: DKLP91) $3.90

LINCH PIN - LINCH PIN Package of 10 linch pins. 3/16" O.D. pin x 1-1/4" Long.***Enter 1 for package of 10** (Part No: DKP316) $3.90

Link End - Plated, forged, 1-1/4" thread, left hand, 1" hole. (Part No: RE1717L) $27.11

Link End - Plated, forged, 1-1/4" thread, right hand, 1" hole. (Part No: RE1718R) $27.11

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8" mounting pins and adapter bushings, 27-1/4" width, 3-1/2"x 3-1/2" beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101) $284.34

Stabilizer Arm HD - Arm only, made of alloy spring steel, for kit 231253XHD, red only. 7/8" hole dia. (Part No: 230042XHD) $23.80

Stabilizer Pin with nut & lockwasher - Category I. Must order in quantity of two price shown is for one. (Part No: SBP75-WNL) $2.04

Top Link - Forged Top Link, 12 inch body, Category I implement ends. Adjusts 16 to 24 inches overall. Dichromate plated. (Part No: JSA1012C) $28.34

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1" thick x 2-1/2" width) . Prevents drawbar from rotating. (Part No: 49A29) $26.72

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2) $27.98

Universal Stabilizer Chain Kit - Chain stabilizers, Turnbuckle & chain links adapt to any size 3-point hitch - usually used on larger tractors - VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed & sold in pairs, less brackets. (Part No: SK102CH) $47.67

Hydraulic System
Coupler Flange - FORD: Drive flange; 5/8" round bore with set screw 1/4" x 3/8" #SSH4-6. Hydraulics: Drive flange; 5/8" round bore with set screw 1/4" x 3/8" #SSH4-6. 2-1/4" b-b (Part No: L36-6) $75.51

Cylinder Seal Kit, For 2 in. cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2" cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: HSK2002) $18.90

Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. (Part No: Hydraulic_Parts) $00.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030) $719.69

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 dia. shaft. 5/16 dia. bolt holes 2-1/4 on center. For 352 (Part No: L78-13) $39.09

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16-18 O-ring boss with two adapters 9/16-18 ORBM x 1/4 NPTM 90 degree swivel. 3 cylinder bore, 8 stroke length, 26 closed length, 12-7/16 barrel length, 1 rod end diameter, 1-3/4 rod end width, 1 diameter base end. (Part No: HTL3103) $262.85

Implements
AXLE BOLT - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317) $18.22

AXLE NUTS (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH) $1.58

BLADE BOLT KIT - For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 (for 1 1/2 Blade Hole), I = 1.12 inches. Contains (BH2500) hardware for 2 blades. (Part No: 63607) $16.66

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH) $2.50

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $8.28

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22) $8.28

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: SPB40) $6.44

Caster Assembly - Tail wheel & hub assembly with grease fitting and fork assembly uses 1 1/2 Diameter shaft. Shaft on Yoke is 1-1/2" diameter, 8" overall length, 7-1/4" to pin hole. New Style Tail Assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269) $172.49

Caster Assembly, Old Style - Tail wheel & hub assembly with grease fitting (4 x 8). Includes Wheel, Hub, Axle Bearing, and Bolt Assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600.Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken bearings (Ref #1-#11). (Part No: BH215) $103.86

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP) $27.92

HUB with BRG CUPS - 4-bolt, 5" bolt circle & 3-5/8" wheel pivot hub with bearing cups (1" axel)(Ref #5). This part fits Caster Assembly (Part Number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1311) $44.15

Hub Assembly - Hub with bushings (3/4"), wheel bolts (4), and grease fitting. Center tube length 5". For rotary cutters: RB60 with new style 1-1/4" dia. caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH) $34.53

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129) $40.23

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100) $75.38

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166) $95.34

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162) $98.19

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163) $107.04

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH) $5.20

Tail Wheel Assembly - 6" x 9" tail wheel assembly with laminated tire, less hub. 4" pilot, 5 bolt holes, 5-1/2" bolt circle. 5-1/4" wide, 21" O.D., 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294) $125.98

Tail Wheel Assembly - 4" x 8" tail wheel assembly with laminated tire. 3-5/8" pilot, 4 bolt holes, 5" bolt circle, 3-3/4" wide, 15" O.D. Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405 & 1406, 2510, 2512, 3108, 3209, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Replaces Sidewinder 15205, Servis Rhino 373024H, Terrain King 373024H, Modern 401-0048, BMB 5337, Hardee C40-RC, King Kutter KK4X8. (Part No: 500BH) $42.90

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP) $21.27

Lights
Flashing Warning Light - Double Sided Flashing Warning Light with Flasher, with Switch. (Part No: D3NN13R300E11M) $57.48

Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V) $48.63

Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, gray - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HG-12V) $30.71

Headlamp Assembly, 12 Volt - (Single) Head Light Assembly 12-volt, blue - Sealed beam headlamp assembly in heavy gauge steel housing with Rubber bezel. Does not look like original. (Part No: L525HB-12V) $38.46

Light Switch with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R) $19.56

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2" x 6" weather resistant steel body (black), glass lens, flood pattern, 140 ft. beam. Halogen bulb, 12 V, 55 watt, replaceable. 12 ft. cord with cigarette lighter plug. (Part No: L100MAG) $41.70

Portable Halogen Work Lamp - 3" x 5" sealed beam unit, 12 V, 50 watt, 4 amp. With handle & magnetic base. Projects flood beam pattern 50 ft. wide x 30 ft. long. Lamp is not legal for street use. (Part No: L200MAGH) $72.05

Safety Light Amber - 12 volt Amber Safety Light, 4 and a 1/4 dia., 3/8Dia by 5/8 mounting Stud.Does not include Flasher. (Part No: S.61357) $13.98

Sealed Beam Bulb - 12 Volt, 3 Lug Terminal Type. 4-1/2" dia. bulb. (Part No: D6NN13N007A) $26.31

Sealed Beam Bulb, 4-1/2 - Red/white combination work/tail light, 4-1/2" diameter. (Part No: S.52670) $26.98

Tail Light Lens - Plastic 4 in. lens for DUOLAMP with FOMOCO stamped on lens (has 2 mounting screw holes spaced 3" apart). Fits tractors 1953 & newer. (Part No: FDV13450A) $16.06

Universal 9 Inch Headlight - 12 Volt off-road 100w Q. Halogen large headlight. Black. Single bolt mount. (Part No: B1585) $61.13

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35W Xenon H3 lamp, size 4.725" W X 4.330" H X 5.512" L, internal ballast, hardened glass lens, far longer life span than halogen 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E) $120.44

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792) $29.93

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting Holes measure 4 3.8 center to center. (Part No: S.67771) $31.65

Miscellaneous
An Interview with Harold Brock - Chief designer of the 9N tractor. Hear stories from Brock's earliest days in the Ford Trade School, first encounters with Henry Ford, meeting Thomas Edison and Harry Ferguson, and hear what it was like to be a key member of the team that created the most important tractor in mechanized farming. (Part No: OIC-NN-111) $24.95

CabCAM Camera Observation System - When you need extra visibility around the farm or out in the field, a versatile camera observation system can give you the edge you need. Improve visibility at night with the twenty-eight infrared illuminator camera for excellent night vision. Reduces the need to turn around to check equipment. CabCAM Observation Kit Includes: Camera: Waterproof, CCD Color with Audio, 28 Infrared Illuminators Allow up to 32 feet of Visibility, Image Mirroring Function, Made to Withstand Off road Conditions. Monitor: 7 Color TFT LCD, Embedded Control Box for Direct Power Input for Cameras, AV2 Video Input for DVD/VCR etc., AV1 and AV3 Video Input to Hook Up to 3 Cameras. Accessories: AV Conversion Cable, Ball Swivel Mount Bracket with Adjustable Mounting Pad, Power Supply Cable, Earphones, Backshield, Cigarette-Lighter Power Adapter, Remote Control, Sunshield, AC Power Adapter, 20' and 65' Weatherproof xtension Cables. (Part No: CC7M1C) $335.61

Canopy - 60" wide x 65" long, moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through moulding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold seperately.Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X) $402.16

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603) $70.84

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604) $61.16

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP Hoop Type ROP Frames up to 52" wide with leg thickness up to 4" x 2". (Part No: B6602) $103.07

Canopy, Small Tractors - 45" Wide x 60" Long Moulded from virtually indestructable flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through moulding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold seperately. Add additional $150.00 to shipping due to weight and size, this item is shipped by truck. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD) $292.51

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approx 31 inch. (Part No: RFC100R) $220.12

Deluxe Tractor Umbrella - Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X) $145.07

Grease Gun - 3-way fill cartridge gun. (Part No: C3NN17125A) $26.74

HAND CLEANER GALLON - Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218) $24.48

Oil System
Lucas Heavy Duty Oil Stabilizer (quart) - A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001) $12.93

PTO / Driveline
Driveline Assembly - AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit is 27mm 1.063 (1-1/16) bearing diameter x 74.6mm 2.940 (2-15/16). 1333mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138) $164.92

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 6 spline Q.D. tractor yoke. 1-3/8 round bore with 1/2 pin hole implement yoke. 1300mm - (51 inch) overall length end of yoke to end of yoke. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16) overall length (43-3/4) . Verify length before ordering. (Part No: AB4111WY) $183.74

Driveline Assembly with Yokes - AB4 series. Complete drive shaft assembly with shielding and tractor & implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-1/4 round bore with pin hole implement yoke. 1350mm (53) overall compressed length end of yoke to end of yoke. Cross and bearing kit, 27mm - 1.063 (1-1/16) bearing dia. x 74.6mm - 2.940 (2-15/16). Overall length 1350mm (53) ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY125R) $181.20

Driveline Assembly with Yokes - AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 - 6 spline Q.D. tractor yoke, 1-3/8 - 6 spline ratcheting torque limiter iwth quick disconnect on implement end. 1372mm (54 inch) overall length end of yoke to end of clutch. 1110mm (43-3/4) compressed length center to center of cross bore. Cross and bearing kit 27mm -1.063 (1-1/16) earing dia. x 74.6mm - 2.940 (2-15/16). 1372mm (54) overall length ***VERIFY LENGTH BEFORE (Part No: AB4111K33) $278.82

PTO Adapter - PTO adapters are located under the PTO category in the Accessories & Universal Parts section. NOTE

PTO Overide Clutch - Overide Coupler For 1 3/8" Female To 1 3/8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C660F) $44.94

PTO Overide Clutch - Overide Coupler For converting 1 1/8" Male To 1 3/8" Male, (Has 1 1/8" female at one end and 1 3/8" Male at the other)6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C670F) $44.94

PTO Overide Clutch - Overide Coupler For 1 3/8" Female To 1 1/8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C680F) $56.86

PTO Overide Clutch - Overide Coupler For 1 1/8" Female To 1 1/8" Male, 6-Spline Free-wheels smoothly when implement exceeds PTO speed. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: C690F) $56.86

PTO Safety Clutch, 40 HP - 1-3/8" 6 spline male and female ends, 6" dia., 40 HP capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164) $210.57

Paint
44 Minute DVD - How to Paint a Tractor - This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250) $24.00

Acrylic Hardener, 16oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 1 to 2 gallons of unreduced paint. (Part No: TP12P) $44.60

Acrylic Hardener, 8oz - Lead free. For alkyd gloss tractor and implement enamel. Improves initial dry time and hardness development. Use with slow dry alkyd base tractor and implement gloss enamel. Not compatible with fast dry enamel or other paints. Mixes 2 quarts to 1 gallon of unreduced paint. (Part No: TP12HP) $27.96

Dakota Prep & Shine, Twin Pack - Kit inlcudes (1) 16.oz bottle Dakota Prep with spray nozzle, (1) 16 oz. aerosol can Dakota Shine, (2) scrub pads (1) light, (1) aggresive. (Part No: DS2PK) $38.48

Dakota Prep, 1 Gallon - Dakota Prep is a water-based and biodegradable cleaner that will remove wax buildup, grease, oxidation and grime from a variety of surfaces to renew paint to its previous luster. It is safe on many surfaces including painted surfaces, decals/vinyl lettering, plastics, fiberglass, clear coat finishes, aluminum, glass and rubber. (Part No: DP1G) $83.37

Dakota Shine, 1 Gallon - Dakota Shine is a unique and patented product that will restore the color, lustre and value to faded and oxidized surfaces like paint, decals, plastics, fiberglass, engine compartments and more. The ingredients are designed to penetrate the surface to rejuvinate the pigments to their original, lime-new appearance. No mixing required, quick dry time and no overspray lines to buff out. Used in conjunction with Dakota prep for best results. (Part No: DS1G) $138.26

Paint, Aluminum, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312GAL) $42.53

Paint, Aluminum, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312QT) $24.74

Paint, Aluminum, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP312SP) $42.52

Paint, Brownish Medium Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245GAL) $59.24

Paint, Brownish Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245QT) $26.54

Paint, Brownish Medium Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on tractors built between 1948-1964. (Part No: TP245SP) $51.68

Paint, Clear Coat, 1 Gallon - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447GAL) $71.91

Paint, Clear Coat, 1 Quart - From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447QT) $29.91

Paint, Clear Coat, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. (Part No: TP447SP) $51.68

Paint, Empire Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360GAL) $42.24

Paint, Empire Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360QT) $24.74

Paint, Empire Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1963 and up. (Part No: TP360SP) $42.52

Paint, Ford White, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470GAL) $82.43

Paint, Ford White, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP470SP) $51.68

Paint, Gloss Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550GAL) $42.24

Paint, Gloss Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP550SP) $42.52

Paint, Gray Primer, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700GAL) $42.24

Paint, Gray Primer, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700QT) $18.69

Paint, Gray Primer, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP) $42.61

Paint, Industrial Yellow, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760GAL) $109.15

Paint, Industrial Yellow, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP760LF-QT) $36.65

Paint, Light Gray, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330GAL) $42.53

Paint, Light Gray, 1 Quart - OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330QT) $24.74

Paint, Light Gray, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. For models 1965 & up. (Part No: TP330SP) $42.52

Paint, Medium Gray, 1 Gallon - Medium Grey. From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240GAL) $42.61

Paint, Medium Gray, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240QT) $24.78

Paint, Medium Gray, Aerosol, 6 Cans - ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability, heat resistant. Fade resistant, smooth uniform film characteristics. Used on 1948 to 1965 tractors. (Part No: TP240SP) $43.56

Paint, Satin Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225GAL) $45.50

Paint, Satin Black, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225QT) $25.92

Paint, Satin Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP225SP) $42.52

Paint, Soft Black, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200GAL) $53.93

Paint, Soft Black, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP200SP) $42.52

Paint, Vibrant Blue, 1 Gallon - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365GAL) $86.56

Paint, Vibrant Blue, 1 Quart - From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365QT) $30.83

Paint, Vibrant Blue, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP365SP) $51.68

Slip Resistant Coating - Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL) $65.92

Slip Resistant Coating - Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT) $27.81

Slip Resistant Coating Kit - Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT) $95.63

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844) $39.95

Seats
Pan Seat, Universal - 17 inch wide Gold zinc plated, 3-1/2" center to center on mounting holes, 1/2" by 1/2" center square. (Part No: B1865) $37.24

Seat Belt - Generic Seat Belt Assembly. Ensure this type will work on your tractor before ordering. Retractable belts are also available. (Part No: SBKT) $23.51

Seat Belt, Adjustable - Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22) $32.37

Seat Belt, Universal - Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT) $23.10

Seat Cushion, Black - Cover with piping and Ford script logo. Fits all 1939-1964 steel seat pans. (Part No: 8N401BLK) $38.67

Seat, Air Suspension, Black Leatherette, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V) $1294.75

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) $1405.98

Seat, Air Suspension, Cloth, Universal - Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056) $1405.98

Seat, Industrial - Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18" W, 19" H, 21" D. (Mounting holes 9" W x 9-3/4" D). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY) $98.77

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. (Part No: TS1050ATSP) $97.65

Seat, Universal - BLUE Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. (Part No: TS1060ATSP) $93.40

Seat, Universal - Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP) $93.40

Seat, Universal - Seat assembly, Black leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before purchasing. Weight 33 lbs. (Part No: TS1110BK) $106.23

Seat, Universal - Seat assembly, Blue leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110BL) $109.62

Seat, Universal - Seat assembly, Yellow leatherette upholstery, Dimensions: 18-3/4 W, 19 inches H, 21 inches D. Non-suspension type with slide track for forward/rear adjustment (Slide track 9 inches W x 11-1/4 D). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 lbs. (Part No: TS1110YL) $106.23

Seat, Universal INDUSTRIAL with SLIDES - Seat, universal, non-suspension style seat assembly with slide track for forward/rear adjustment. Slotted base for adjusting slide tracks side to side 4" to 10-1/4". Black leatherette upholstery, vacuum formed and watertight for use in all weather conditions. (Part No: TS1036IND) $70.15

Tie-On Seat Cover - Blue & White, 19" wide. Deluxe with 2 inches of foam. (Part No: R1013) $30.00

Universal Seat - Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15" wide, 17" long, 19" high to the back of the seat. (Part No: TS1015) $172.58

Universal Seat - **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. (Part No: TS1040ATSP) $97.65

Sheet Metal / Body Parts
2 Hour DVD - The How To's of Sheetmetal Repair - This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD) $24.00

Cab Foam Kit Spray Adhesive - 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140) $30.09

DZUS Fasteners Kit - Universal Set of 5 fasteners. 1/4 Turn Fasteners. For 13/32 inch holes, Head Diameter is 11/16, springs are 1 7/8 inch in length. Verify size before ordering. (Part No: DZUS2) $16.00

Pilot Punch Set - Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16, and 1/2. (Part No: RPD112K) $138.96

Tool Box - Universal Tool Box 15 1/2" X 4 3/4" X 4 1/4". Painted Red. (Part No: R2685) $29.40

Tool Box, Fender Mount - This is an aftermarket toolbox designed to mount easily on the fender of most agricultural and industrial tractors. This is an aftermarket item, unlike any original toolboxes, and is meant for working tractors in need of a good toolbox. 18 inches long, 3-5/8" wide and 4-1/2" deep. (Part No: TB100FM) $43.86

Steering
Steering Wheel Spinner Assortment - Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Part No: WSV125A) $85.71

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Part No: R3275) $10.00

Steering Wheel Spinner, Black - Comes with mounting hardware. (Part No: R3276) $11.70

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Part No: R3279) $11.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Part No: R3278) $11.70

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Part No: R6323) $11.70

Steering Wheel Spinner, Red - Comes with mounting hardware. (Part No: R3277) $11.70

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Part No: R3280) $11.70

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16" x 5/8" x 5/8", 1 15/16" x 3/4", 3/4", and 1 3/8" x 1" x 1/2". (Part No: TIERODBOOTS) $15.30

Tools
*Combination Wrench Set - 22 pieces SAE/Metric. Polished chrome vanadium steel. Metric: 9, thru 19 mm. SAE: 1/4 thru 7/8. Comes with a durable plastic rack for handy storage. LIFE TIME UNLIMITED WARRANTY. (Part No: W1069) $29.99

Adjustable Cylinder Hone Replacement Stones, Coarse - Set of three 4" coarse textured stones with cotter pins for 900542 cylinder hone. (Part No: 900563) $17.48

Adjustable Cylinder Hone Replacement Stones, Fine - Set of three 4" fine textured stones with cotter pins for 900542 cylinder hone. (Part No: 900556) $17.48

Adjustable Cylinder Hone Replacement Stones, Medium - Set of three 4" medium textured stones with cotter pins for 900542 cylinder hone. (Part No: 900549) $17.48

Adjustable Engine Cylinder Hone - Resurfaces cylinder walls so new rings will seat and eliminate minor cylinder wall imperfections. 2" to 7" diameter range with adjustable tension settings to control the cutting action. Features flexible shaft that will fit any variable speed drill and replaceable 4" stones. Medium texture stones included. Stone replacement part numbers are (900556)Fine textured stones, (900549) medium textured stones and (900563) coarse stones. (Part No: 900542) $38.37

Blade Fuse Assortment - With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891) $19.95

Chain Binder - 1/4" chain binder, 2600 pound load limit. (Part No: LL104) $36.74

Chain Binder - 3/8" chain binder, 5400 pound load limt. Use with either 5/16" or 3/8" chain. (Part No: LL105) $41.70

Chain Binder - 1/2" chain binder, 9200 pound load limit. Use with either 3/8" or 1/2" chain. (Part No: LL106) $78.11

Combination Wrench Set - 11 pieces. Sae sizes 1/4 to 7/8. Chrome vanadium steel construction. Handy storage rack. LIFETIME UNCONDITIONAL WARRANTY. (Part No: W1061) $21.00

Compression Tester - Checks cylinder compression up to 300 PSI. Fits 14 and 18mm spark plug threads. Equipped with air-hold valve and gauge reset button. 11 inch flexible rubber hose. Complete with instructions. (Part No: W80579) $32.48

Cotter Pin Assortment - 150 Pieces. Contains sizes of 1/8x2, 5/32x2 1/2, 3/16 x 3, 1/4 x 2, 1/4 x 3, 5/16 x 2 1/2. All in a convenient re-sealable plastic case. (Part No: W5206) $12.48

Cotter Pin Assortment, Small - 560 piece assortment of 1/16" x 1", 3/32" x 1", 3/32" x 1-1/2", 1/8" x 1-1/4", 1/8" x 2", 5/32" x 2-1/2" all in convenient re-sealable plastic case. (Part No: W5205) $9.40

Diesel Compression Test Kit - Complete kit with case. 0 to 1000 PSI Gauge (0-700kPA). Includes 9 adapters for popular Domestic, Asian and European vehicles. Will fit the following thread sizes: 24 x 2.00, 12 x 1.25, 10 x 1.25, 10 x 1. Tests compresssion through both flow plug and injector holes. Gauge accuracy +/- 2 percent. (Part No: W89731) $59.95

Digital Calipers, Stainless - High quality hardened stainless steel digital caliper. calculates measurements up to 6" with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6) $36.11

GREASE GUN - GREASE GUN-Pistol handle grease gun uses standard 11" grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121) $28.88

GREASE GUN - Spring fed 11" barrel grease gun. Uses standard 11" grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080) $26.74

GREASE GUN - HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142) $35.16

GREASE GUN CLAMP - Clamp holds all 2-1/4" diameter barrel hand guns. Bolts or screws anywhere thru hole in bracket base. (Part No: GC102) $12.44

GREASE GUN POWERLUBER 14.4V BATTERY - Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401) $109.95

GREASE GUN POWERLUBER 14.4V with CASE 1 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B) $270.05

GREASE GUN POWERLUBER 14.4V with CASE 2 BAT - Grease gun 14.4 Volt PowerLuber, Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30" flex hose with spring guard & custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B) $376.87

GREASE HOSE 12 INCH - 12 flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G115) $10.86

GREASE HOSE 18 INCH - 18" flexible grease gun hose.Sold in quantities of 2, PRICE IS FOR EACH. (Part No: G118) $9.90

Hair Pin Assortment - 150 pieces. Includes 6 different sizes from 1 3/16 Length to 2 15/16. All in a convenient re-sealable plastic case. (Part No: W5210) $8.32

Hay Moisture Tester - Self Calibrating Electronic Moisture Tester. (Part No: S.58474) $249.90

Hobby Tool Kit - With Carrying Case. Complete Knife kit with two handle styles. Also comes with 3 inch caliper, tweezers, precision screwdriver and 28 blades. (Part No: W1709) $23.74

Hose Clamps Assortment - 26 pieces. Includes sizes of: 5/8, 7/8, 1, 1 1/16, 1 1/4, 1 1/2 inch. All in a convenient re-sealable plastic case. (Part No: W5348) $8.06

MULTI TESTER - Compact size meter for testing volts (up to 500 Volts), OHMS and AMPS. Includes color coded test probes and instruction booklet. Uses AA batteries, not included. (Part No: ETA66420) $24.76

Main Seal Installer/Remover - Removes and installs upper rear main seals on many engines without removing engine or crankshaft. Contains corkscrew removal tool, T-handle and wire with clip for pulling new seals into place, 2 extra clips. (Part No: W84019) $7.10

O-Ring Assortment - 407 pieces. Includes 32 sizes from 1/4 O.D to 2 1/4 O.D. All in a convenient re-sealable plastic case. (Part No: W5202) $16.36

Piston Ring Compressor - Use to install pistons. Positive compression and adjustable friction brake. Includes instructions. Band diameter from 3.5 to 7 inches (88 to 177mm). (Part No: W80573) $18.12

Piston Ring Groove Cleaner - Cleans carbon and deposits from ring grooves. Includes two 5 cutter wheels for a total of 10 groove cleaning sizes: SAE: 1/16, 5/64, 3/32, 3/16 and 1/4. Metric: 1.5, 1.75 and 2 mm. (Part No: W80576) $18.26

Rotary Tool Kit - 80 Pieces. Hand held rotary tool. Turns at 1600 rpm. Contains cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone and drill bits. Great for cutting, grinding, polishing, sharpening and drilling. (Part No: W50083) $19.00

Rubber Grommet Assortment - 125 pieces in 18 various sizes from 1/8 x 9/32 to 1 inch. All in a convenient re-sealable plastic case. (Part No: W5214) $9.38

Screwdriver Set - 30 pieces. Contains 7 screwdrivers 1/4 to 6 inch, a magnetic bit driver, 6 precision screwdrivers, 14 power bits. All contained in a Plastic Rack (Part No: W1718) $23.08

Spring Assortment - 200 pieces. Includes compression type sizes from 9/32 x 1/2 to 7/32 x 1 1/2, extension type from 13/64 x 13/16 to 11/32 x 1 7/16. (Part No: W5200) $7.98

Step Drill Bit Set - 3 Pieces. Titanium Nitride Coated high speed steel. 1/4 inch shank. Drills holes up to 1 inch. For use with metal, wood or plastic. Starts on contact, no center punch required. Automatically deburrs holes as you drill. (Part No: W9003) $17.20

T-Handle Hex Key Set - 10 Pieces (SAE). High quality carbon steel shafts. Black oxide finish resists corrosion. PVC T-handle grips for added torque and comfort. Sizes: 3/32, 7/64, 1/8, 9/64, 5/32, 3/16, 7/32, 1/4, 5/16 and 3/8 inch. Comes with hand storage rack (mountable). (Part No: W80274) $19.94

Torque Wrench - Micrometer 1/2 inch drive adjustable torque wrench. Chrome plated alloy steel. Reversible ratchet head. SAE and Metric Scale. 10 to 150 lb torque range. 1 lb graduations. (Part No: M200DB) $34.40

Valve Spring Tool - Compresses springs without removing head. Adjustable cam handle keeps tool correctly adjusted for entire job. Remove lever and turn with socket in confined areas. (Part No: W80567) $31.24

WIRE STRIPPER 4-WAY - 4-way wire stripper/crimper tool, cuts wire 10 gauge and lighter. Strips wire 10-22 gauge, crimps solderless terminals. (Part No: ETA66223) $9.88

Winch Remote, Wireless - Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003) $37.50

Winch Set, 2500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002) $182.83

Winch Set, 2500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0004) $168.27

Winch Set, 3500 Lb - Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001) $209.43

Winch Set, 3500 Lb - Universal 12 volt with Hand held remote. (Part No: 3013-0005) $194.87

Wire Terminal Assortment - 160 piece set. Contains 19 popular sizes and types of wire terminals. All in a convenient re-sealable plastic case. (Part No: W5213) $15.48

Woodruff Key Assortment - 80 pieces. Includes 10 each of: 3x5x13 mm, 3x6.5x16 mm, 4x5x13 mm, 4x6.5x16 mm, 4x7.5x19 mm, 5x7.5x19 mm, 5x9x22 mm, 6x9x22 mm. All in a convenient re-sealable plastic case. (Part No: W5341) $11.26

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Front Tractor Tires - We are now offering Front Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

Power Adjust Rim - 11x28, 4-rail type. For double ramp clamp. Holes in rail for stop body screw are drilled parallel to axle (not at angle). Use with stop body C0NN1057A, stop body screw C0NN1058A, clamp E5NN1043AA. Fits tire size 12.4 x 28, 13.6 x 28. Add addition $20.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Verify OEM Part # before ordering. (Part No: C5NN1050H) $349.98

Rear Tractor Tires - We are now offering Rear Tractor Tires! Click on the picture to view different tread designs. Tires that have a corresponding letter are available. Tread designs vary depending on size and availability. Allow 7 to 10 business days for delivery. Call for shipping cost, pricing and tire availability 1-800-853-2651. Please have your tire size available. Do not put this part in basket. NOTE

Stop Body - For the Power Adjust Rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 503676M1. Must be ordered in multiples of 2, priced each. (Part No: C0NN1057A) $28.70

TIRE GAUGE - Gauge has special oiling & pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350) $15.48

TIRE GAUGE DIAL - Precision bourdon tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG) $17.16

Tire Gauge, Heavy Duty - Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Breass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599) $42.82

Tire Paint, Black - Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844) $39.95

Tire Paint, Black - Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It won't rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is a concentrate which you dilute one-to-one with water. A little goes a long way! (Part No: E844Q) $21.00

Tire Tube 32 Inch - For 9.5 x 32 Inch Tires. (Part No: WHS062) $56.95

Tire Tube 38 Inch - For 11.2, 12.4 x 38 Inch Tires. (Part No: WHS064) $65.25

Tire Valve Fluid Adapter - For ballast. (Part No: S.61167) $27.90

Tire and Tube - 400x12 3 Rib Tire with tube. (Part No: 400x12-3) $74.22

Wheel Clamp - Disc to rim. Double ramp type for power adjustable rims. For 28" rim on tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -) Use with rims PAR10X18 and C5NN1050J and C5NN1050H. Also replaces 3615259M1, 70235676 and 7000000241. (Part No: E5NN1043AA) $23.82

Wheel Rim Stop Body Screw - Use with power adjust rims PAR10X28 and C5NN1050J and C5NN1050H. For tractors 2000, 3000, 4140, (10-1968 ot 1975); 2600, 3600, 4100, 4600SU except Baseldon models, (1981 to 3-1990); 3230, 3430, 3930, 4130, 4630, 4830LCG, (3-1990 TO -). MUST be ordered in multiples of 2, price is for 1. (Part No: C0NN1058A) $13.00

Show CategoriesShow all 5000 Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Ford 5000 Manuals
5000 I&T Aftermarket Shop Manual 176 Pages (Part No: FO-42) $32.95

5000 G&D 4-Cyl (1965-1975) Service Manual 06901895 763 Pages (Part No: 65-FTSM) $79.95

5000 Series G&D 4-Cyl Parts Manual - Due to the heaviness of this item, there is an additional $15.00 shipping charge that will be added when your order is processed. 2364 Pages (Part No: FO-P-2,3,4000) $267.95

5000 G&D 4-Cyl (1968-1975) Operators Manual 172 Pages (Part No: FO-O-2-5000) $29.95

5000 G&D 4-Cyl (1965-1967 Operators Manual 171 Pages (Part No: FO_2000+_OP) $29.95

5000 Super Major I&T Aftermarket Shop Manual (Part No: FO-201) $29.95

5000 Super Major G&D Operators Manual 114 Pages (Part No: FO-O-MAJOR4000) $29.95

Super Major 5000 I&T Aftermarket Shop Manual (Part No: FO-201) $29.95

Miscellaneous Related Items
Literature
New Size Ford Color Sales Brochure - For Ford 2000, 3000, 4000, 5000, 6000. All new features on new models. (Part No: BR-9) $9.00

Hat
Ford 8N hat - Tractor is embroidered on the hat with words 'Ford 8N' (Part No: FD8N) $19.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Show Categories]   [Show all Ford Models]   [Printer Friendly]  





PayPal


Customer Service
Monday - Friday
10:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure

  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2014 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.