(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


International Harvester / Farmall Cub Tractor Parts

[ Show Pictures ]

[Categories]   [All Farmall Models]   [Print]  


Brakes
Brake Band - Lined Brake Band (1). For Cub after serial number 173600. (Part No: 358753R21)
$43.26

Brake Band - Lined Brake Band (1). For Cub before serial number 173600. (Part No: 350967R21)
$37.50

Brake Drum - For Cub, Cub Lo-Boy. Brake Drum. (0690R) (Part No: 350805R2)
$34.75

Brake Pedal Return Spring - For tractor models Cub, Cub Lo-Boy. (Part No: 350951R1)
$6.68

Clutch
Clutch Alignment Tool - 15/16 inches x 10 spline. For model Cub, Cub Lo-Boy. (Part No: 900151)
$9.50

Clutch Disc - For Cub, Cub Lo-Boy, Pacer, Pony. REMANUFACTURED (Rockford Style Clutch) 6-1/2 inch diameter, 15/16 inch hub, 10 spline, organic lining. (Part No: 351773R91)
$33.75

Clutch Housing Cover - For A, Super A, AV, B, BN, C, Super C, Cub. Clutch Housing Cover is Oval with Bracket and Screw. (Part No: 57576DX)
$14.25

Clutch Housing Cover - For Super A, AV, C, Super C, Cub, 100, 130, 140, 200, 230, 240. Clutch Housing Cover is Round with Bracket and Screw. (Part No: 351486R1)
$16.00

Clutch Housing Inspection Cover - This Clutch Housing Inspection Cover fits Cub, and Cub Lo-Boy. Replaces: 351485R2 (Part No: 351485R2)
$15.60

Clutch Kit Complete - 6 1/2 Inch - Clutch kit *NEW*. Includes Pressure plate, Disc, Release bearing in carrier, Bushing, and Alignment tool. For the Cub, Cub Lo-Boy. (Part No: 351760R91-Comp)
$64.57

Clutch Release Yoke Pivot Pin - This Clutch Release Yoke Pivot Pin has a 0.373 inch diameter and 5.695 inch length. It is made from improved 4140 steel. It fits Cub and Cub Lo-Boy and replaces original part number 350948R1. (Part No: 350948R1)
$13.50

Clutch Release Yoke, Pair - Right and left hand sides. For tractor models: Cub above SN# 32229 and Cub Lo-Boy. Replaces 353240R2, 353239R2. (Part No: 3532LR)
$28.42

Clutch Release, Yoke (Left Hand) - Fits Cub above serial number 32229 and Cub Lo-Boy. (Part No: 353239R2)
$16.64

Clutch Release, Yoke (Right Hand) - Fits Cub above serial number 32229 and Cub Lo-Boy. (Part No: 353240R2)
$17.27

Pilot Bushing - For Cub. This is a bushing, not a bearing. Please verify before ordering. Measures 0.815 inch outside diameter, 0.625 inch inside diameter and 1.000 inches long. (Part No: 251266R1)
$2.99

Pressure Plate - This Pressure Plate is used on models Cub, Cub Lo-Boy. Pressure Plate Assembly: 6 1/2 inch, 3 fingers, 6 spring, cast plate. Verify diameter. (Part No: 351760R91)
$58.65

Release Bearing, Original Style - 1.250 inch inside diameter. For Cub, Cub Lo-Boy. Clutch Release Bearing. (Graphite) (Part No: 350921R11-OE)
$21.00

Release bearing - NOT Graphite - Release Bearing, With New & Improved Automotive Style Roller (Thrust) Bearing, not fixed graphite like original. For tractor models Cub, Cub Lo-Boy. (Part No: 350921R11)
$61.80

Cooling System
Belt, Fan - For Cub and Cub Lo-Boy serial number 501 and up, gas. (Part No: 251428R1)
$9.21

Fan Assembly, Early - This fan assembly includes 12 1/4 inch fan and 3 1/2 inch outside diameter pulley for models Cub and Cub Lo-Boy engine serial numbers 501 to 165152. Assembly includes fan, pulleys, bearings and shaft. This fan assembly has an improved sealed bearing, no need to grease. Replaces: 131489C1, 251427R91, 251645R91. Will not fit 154, 184 or 185. (Part No: 251427R91)
$68.69

Fan Pulley Assembly, Late - This pulley assembly fits Cub and Cub Lo-Boy C-60 engine serial number 165153 and up, Super A with C-113 engine serial number 317192 and up, Super AV and Super AV1 with C-123 engine, Super AV1 with C-113 engine serial number 317192 and up, Super C with C-123 engine, 100 and 130 with C-123 engine, (200, 230 and 240 with C-123 engine below serial number 65000). Fan mounting bolt thread is 12-24 UNC, 3.125 inch bolt pattern. Shaft is 5/8 inch -18 Thread. 4.379 inch outside diameter rear pulley. 4.062 inch outside diameter front pulley. VERIFY MEASUREMENTS. Will not fit 154, 184 or 185. (Part No: 131486C91)
$119.55

Fan Shroud - Fits Cub, Cub Lo-Boy. Replaces: 351037R2 (Part No: 351037R2)
$65.55

Radiator - Radiator, for tractors: Cub, Cub Lo-Boy. Includes mounting gasket. For Cub, Cub Lo-Boy. Replaces: 351878R92, 351878R93, 353903R92 (Part No: 351878R92)
$134.55

Radiator & Air Hose Kit - For Cub and Cub Lo-Boy. Radiator and Air Cleaner Hose Kit includes Original Whittek Tower Style Hose Clamps. (Part No: R2697)
$52.31

Radiator Bolt and Washer Kit - Contains 18 bolt and 18 washers. Stainless Steel. For tractor models Cub, Cub Lo-Boy. (Part No: IHS951)
$13.86

Radiator Cap, Original - Fits Cub and Cub Lo-Boy. Restoration quality. Exactly like the original. The radiator cap measures 2.335 inches OD. The tang to tang distance is 1.990 inches with a tang width of .370 inches. (Part No: 400080)
$9.75

Radiator Cap, Pressurized - 7 psi cap for 1 inch tall filler neck, 2.33 inch outside diameter, 2.0 inch tang to tang, 1.367 inch tall. For tractor models Cub 1975 to 1979 serial number 248125 and up, will also fit older Cubs when a pressurized system is desired. Will NOT fit 154, 184, 185 Cubs. (Part No: 365892R91)
$10.05

Radiator Cap, Pressurized - 7 psi cap for radiators with 3/4 inch deep filler neck, 2.33 inch outside diameter, 2.0 inch tang to tang, 1.096 inches tall. For model Cub 1975 to 1979 serial number 248125 and up, also fits older Cubs if pressurized system is desired, (Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy to use original cover you must drill 2 holes in the wings of the cap to mount the cover). (Part No: 404548R1)
$4.73

Radiator Gasket - For tractor models Cub, Cub Lo-Boy. (Part No: 351032R1)
$5.18

Radiator Support - This Lower Radiator / Steering Gear Housing is for Farmall Cub & Cub Lo-Boy. It Includes the steering worm shaft bushing and the steering sector bushing. Both are installed. Replaces 350886R11 and 350886R2 (Part No: 350886R2)
$398.46

Radiator cap - Fits Cub and Cub Lo-Boy. Non-Pressure Cap. (Part No: 400586R1)
$5.36

Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub LoBoy. (Part No: 45314DC)
$10.54

Decals and Emblems
Decal Set - This is a complete Vinyl Chassis Set, 10 pieces for Red Cubs with metal hood emblems, no hood decals. (Part No: R4683V)
$31.57

Decal Set - For Cub (1949-1954) "McCormick Farmall Cub". This is a set of 11 self adhesive decals. These are printed on Mylar, not die cut. (Part No: IHCCub-Late)
$18.75

Decal Set - For model Cub 1947. This is a set of 12 self adhesive decals. Has "McCormick" circle decals. These are printed on Mylar, not die cut. (Part No: IHCCub-CIRCLE)
$25.15

Decal Set - For 1947-1949 "McCormick-Deering" Farmall Cub. This is a set of 10 self-adhesive decals. These are printed on Mylar, not die cut. (Part No: R2565)
$36.62

Decal Set - RARE Decal Set. Contains 12 self adhesive decals for a 1947 Cub with McCormick-Deering lettering, and the Cub lettering is in a circle. These are printed on Mylar, not die cut. (Part No: R2564)
$95.26

Decal Set - Die Cut - For 1947-1949 "McCormick-Deering" Farmall Cub. Set of 10 self-adhesive decals. (Part No: R2565V)
$86.11

Emblem - Fits Cub. (Part No: 364044R1)
$47.61

Front Emblem - For Cub. Front Emblem "IH" Block. (Part No: 362687R1)
$11.63

Hood Ornament - Chrome. Comes with mounting hardware. Fits [Cub Cadet: 70, 71, 72, 73, 100, 102, 104, 105, 122, 123, 124, 125, Cub Cadet (All up to serial number 399999)] International - Fits Cub (serial number 210001 to 248124), Cub Lo-Boy (serial number 10001 and up). As a Radiator Ornament: 154, 184, 185. (Part No: 392718R1)
$19.75

Side Emblem - This Side Emblem measures 5 7/8 inches long and 1/2 inch tall. This fits tractor models Cub (serial number 185001 to 210000), 100, 130, 200, 230, Cub LoBoy: Cub Loboy (up to serial number 10000); Replaces: 362389R1. "McCORMICK". 1 piece for 1 side. Replaces OEM number 362389R1. (Part No: R4203)
$36.23

Drive Train
1st & Reverse Sliding Gear - For tractor models Cub, Cub Lo-Boy. 13 teeth. (Part No: 350867R1)
$31.50

2nd & 3rd Sliding Gear - For Cub (to serial number 192112) 17 and 26 teeth. (0108R) (Part No: 350868R1)
$49.61

2nd and 3rd Sliding Gear - This 2nd and 3rd Sliding Gear has 16 and 26 teeth. It fits Cub (serial number 192113 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy Replaces: 364520R1. (Part No: 364520R1)
$69.00

Axle Oil Seal - This axle oil seal fits the following tractor models: A, Super A, 100, 130, 140, and Cub. It has an inside diameter of 1.750 inches, an outside diameter of 2.632 inches, and a width of 0.500 inches. It replaces part numbers: 264698R91, 273563R91, 275596R91, 357768R91, 382220R91, 383387R91, and 53599D. (Part No: 264698R91)
$14.95

Differential Shaft - For Cub, Cub Lo-Boy. Left hand, 12 teeth. (0112R) (Part No: 350800R1)
$82.57

Final Drive Gasket Set - Contains 1 rear axle houseing oil pan gasket, 1 outer seal cap gasket, 1 inner axle bearing cap gasket and 1 upper differential shaft gasket. Does 1 side, 2 kits needed per tractor. For tractor models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 350820R1, 350823R1 and 350827R1. (Part No: 350804R1)
$19.28

First and Reverse Shift Fork - For tractor models: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 355600R93, 355600R91, 353270R1, 353042R1, 353044R1, 352772R1. (Part No: 355600R92)
$79.15

Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Part No: 53717DA)
$5.25

Gear Shift Lever - For model Cub all with pan seat NOT with deluxe seat. Made in the USA. (Part No: 356530R91)
$64.30

Inner Differential Bearing Retainer Seal - This Inner Differential Bearing Retainer Seal is used in Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, and Cub 185 Lo-Boy. It measures 1.832 inches outside diameter, 1.062 inches inside diameter and is 0.250 inch wide. Two used per tractor. Sold individually. Replaces Replaces: 18674K, 359787R91, 377239R91, 377240R91, 381908R91, 383315R91, 385872R1, 385872R91, 555382R91, 555398R91 (Part No: 18674K)
$7.76

Rear Axle Outer Seal - Outer seal, must reuse your seal retainer. For tractor models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces 358799R1 and 547431R91. 2.125 inside diameter, 3.066 outside diameter, width is .510 inches. (Part No: 350822R91)
$17.70

Transmission Case Rear Cover Plate Gasket - This Transmission Case Rear Cover Plate Gasket Fits: Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, Cub Lo-Boy. It replaces original part number 350837R3 (Part No: 350837R3)
$7.25

Transmission Shaft - Fits Cub. 42-3/8 inches long, 10 splines clutch end, 10 and 6 splines transmission end. Transmission Input Shaft. For Cub, Cub Lo-Boy, clutch-to-transmission shaft. Replaces: 351534R11 and 351534R21. (Part No: 351534R11)
$99.58

Electrical System
12 Volt Conversion Kit - Converts Cubs with 6 volt pos. ground systems with distributors and generators to 12 volt neg. ground systems with an alternator. Kit includes an Alternator that fits under the hood, wiring harness and alternator mounting kit. Does not come with instructions. Follows basic electrical and mechanical principles. Customer would need to add a 12 volt battery and either an in-line resistor to the coil if keeping a 6 volt ignition system or install a 12 volt coil for a 12 volt ignition system. Uses the Alternator part #ABC535. (Part No: CUB12VOLTCONV)
$345.63

Alternator - Tisco remanufactured Delcotron alternator, 42 amp, internal regulator, 3 terminal 3 o-clock position. Sold outright, no core, deposit, or return. Tractors Cub, Hydro 70, Hydro 86, 100, 186, 140, 464, 574, 666, 674, 868, 766, 786, 886, 986, 966, 1066, For 100, 1066, 1086, 140, 1466, 1468, 1486, 1566, 1568, 1586, 186, 2500A, 464, 574, 666, 674, 686, 766, 786, 86, 886, 966, 986, Cub, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86 (Part No: 1100583)
$111.24

Alternator - Tisco remanufactured Delcotron alternators, 72 amp, internal regulator, 3 terminal 3 o-clock position. No cores, no deposit, no return. Tractors: Cub, Hydro 186, 574, 786, 886, 986, 1086, 1486, 1586, 2500A. For 1086, 1486, 1586, 2500A, 574, 786, 886, 986, Cub, HYDRO 186 (Part No: 1102920)
$71.69

Alternator - 12 volt, 61 amp. For tractor models 580 Super D, 580 Super E, 580D, 2090, 2290, 2390, 2590, 2094, 2294, 2394, (2470 serial number 8762940 to 8825000 and 8826412 and up), 2590, 2594, 3294, (1070 serial number 8675001 and up), 1270, 1370, 1570, 2670, (970 serial number 8816812 to 8817164 and 8817283 and up), 480C, 480D, 480LL, 580C, 2500A, 464, 574, 674, 4166, 4186, 1086, 1486, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 886, 986, 3088, 3288, 3688, 3688HC, 5088, 5288, 5488, (Cub serial number 248125 and up), Cub 184, Cub 184 Lo-Boy, Hydro 70, Hydro 86, 666, 686, (815, 915 serial number 8001 and up), Hydro 186, Hydro 3488, 786. Replaces A46932, A46938, A47044, A47057, A47623, A47625, TY6600, 1102920, 1103160, 1103184, 1105164, 1105178, 1105514, 1105574, 20-7101161. (Part No: ADR0133)
$64.79

Alternator - For Cub and other various models. This is the smallest alternator of those listed and will fit under the hood of most applications and is used in the 12 volt conversion kit for the Cub. Uses a 1/2 pulley. A 5/8 belt will ride high on the pulley and work fine. (Part No: ABC535)
$152.84

Alternator Bracket Kit - Direct bolt on, uses existing belt, no cutting on hood. For tractor models Cub, Cub Lo-Boy. Uses Alternator # ABC535. (Part No: IHALTCub)
$41.78

Battery Cable - This Battery to Starter Switch cable is about 87 inches long. The cable is 2 Gauge and has a black PVC covering with soldered and heat sealed ends. This cable is for the Cub up to serial number 224400 and the Cub LoBoy up to serial number 18700. Replaces: 351956R91, 3519456R91. (Part No: 351945R91)
$55.78

Cable Rear Light - 56 inches total length, 12 volt, for Cub serial number 239877 and above. (Part No: 387312R91)
$12.80

Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353875R91)
$56.86

Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Part No: 353874R91)
$54.40

Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Part No: 353903R1)
$3.90

Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Part No: 351693R92)
$5.24

Distributor Drive Housing - This is a USED distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing, part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Part No: 363749R91)
$58.65

Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Part No: 353934R11)
$14.96

Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Part No: 353900R11)
$12.00

Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Part No: 341139R1)
$6.95

Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Part No: IHS3166)
$36.75

Distributor Tach Drive Housing Block Off Plate - This new Distributor Tachometer Drive Housing Block Off Plate with Gasket is used with part number 363749R91 when a Tachometer is not used. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 363764R1, 363765R1. (Part No: 363764R1)
$7.95

Distributor, New - Original IHC design. For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, H, HV, I4, I6, I9, ID9, ID6, M, MD, MDV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD-TA, Super MDV, Super MTA, Super MV, Super W4, Super W6. (Part No: R6332)
$303.60

Distributor, Rebuilt - Complete Remanufactured distributor for tractors with DELCO distributors. For tractor models Cub, A, B, C. NO Core charge. (Part No: R1197004)
$303.32

Distributor, Rebuilt - Complete remanufactured distributor for Farmall Cub, A, B, C, Super A, H, M, Super H, Super M, W6, W9, Super W6, 100, 130, 200, 240, 300, 400, 404, 450, 504 tractors with IH distributor with 353898R1 housing casting number. IH original part numbers 353890R91, 107304C91. A refundable $80.00 core charge will be added to your invoice. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Also NOTE: Note that if the core is not a complete and good core, part or all of the core charge will not be refunded. Typically, most cores need a shaft replacement and the cost of the shaft will be deducted from the core charge. This is usually $30 (Part No: 353898R1)
$151.80

Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Part No: 1442P6)
$103.28

Electronic Ignition Conversion Kit - Electronic Module Replaces Points and Condenser. Use on tractors with 12 volt Positve Ground System only. (FOR NEGATIVE GROUND order part number 1442). Use with distributor number 357935R91 or 353898R1 on models: B, Cub, cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. (Part No: 1442P12)
$103.28

Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Part No: 1442)
$93.61

Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Part No: 376852R91)
$6.80

Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Part No: 376852R91)
$6.80

Generator - 6 volt, 35 amp. For tractor models 330 gas, 340 gas, 140 serial number 26800 and below, Cub Lo-Boy serial number 16398-18700, Cub serial number 221293-224400, 240. Refundable $25.00 core charge will be added to orders. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces 1100052, 1100055, 368652R92. (Part No: TG-72)
$303.29

Generator - 12 volt, 20 amp. For tractor models 1000, 1010, (140 serial number 26801 and up), (2656, 2706 gas), (2806, 806 up to 24555 gas Farmall or up to serial number 6015 gas International), (3414 with C153), (3616 gas 1965 to 1970), 700, 700B, (706 gas), 810B, 900, 710B, 800, 800B, 810B, 900, (Cub Lo-Boy serial number 18701 and up), (Cub serial number 224401 to 248124), TD6, TD9 1955 to 1958). Refundable $22.50 core charge will be added to your order. (Part No: 1100401)
$227.51

Generator Belt - Fits Cub 4 Cylinder Gas Engines serial number 501 to 165152. This replaces a 20-21 inch x 1/2 inch V-Belt. (Part No: 351321R1)
$3.74

Generator Belt - For C60 gas engine in: Cub (serial number 165153 and up), Cub Lowboy. Belt is 1/2 inch wide and 23-1/4 inches long. (Part No: 107671C1)
$7.63

Generator, 6 Volt, Remanufactured - 6 volt, 25 amp. Delco fits Models: 200 1.75 inch SHAFT, 400 501-13673 GAS, A, A1 with BATTERY, AV with BATTERY, AV1 with BATTERY, B, BN, C, (Cub prior to serial number 221292 and Cub Lo-Boy prior to serial number 16397 - both with 1.75 inch long shaft) H, HV, M, MV, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MTA GAS, TD6 1955-56, TD9 1955-56, W4, W6, W6TA. Refundable $25.00 core charge will be added to your order after the order has been received and will not show on your receipt. (Part No: 356936R91)
$245.72

Generator, Delco Type, 12 Volt - For tractor models 140, 214, 220, 37, 404, 420, 424, 450, 460, 504, 560, 600, 606, 660, 700, 770, 780, 806, 2404, 2424, 2504, 2606, Cub, Lo-Boy, T6, TD6, TD9, Power Unit. Replaces Delco numbers 1100305, 1100335, 1100363, 1100364, 1100369, 1100394, 1100401, 1100409, 1100426. Remanufactured. Refundable $50.00 core charge will be added to your order. (Part No: TG-59)
$232.53

Ignition Switch - For the following Models using a magneto: Cub, Cub Lo-Boy, A, B, C, H, M, 100, 130, 140, 200, 230, 300, 350, 400. NOT like original. (Part No: 54207DB)
$7.88

Ignition Switch - 2 terminal. For the following Models using a distributor: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, (140 6 volt), 200, 230. NOT like original. (Part No: 62801DC)
$6.75

Ignition Switch - This Ignition Switch is for Distributor Ignition Systems. This is a 2 terminal switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230 (Part No: R2720)
$42.00

Ignition Switch - This Ignition Switch is for Magneto Ignition systems. This switch has only 1 terminal (Picture shows 2). For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub. (Part No: R2721)
$42.69

Ignition Tune Up Kit - Ignition TUNE UP KIT For Cub 1963 and Later with IH Distributor, 140, 340, 454, 504. Includes the Rotor, Point and Condenser (ATK9BIR Kit) Plus Spark plugs of 18mm, 1/2 inch reach, 7/8 inch hex. (Part No: IHTK2)
$29.62

Ignition Tune Up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). (Part No: ATK9BIR)
$10.88

Key Switch - This 2 position key switch comes with 1 key and has 3 terminals. Fits a 13/16 inch dash hole. For tractor models (140 from serial number 45001 and up), (Cub from serial number 239827 and up), Cub Lo-Boy, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 123. (Part No: 60736C1)
$37.20

Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Part No: 366313R91)
$19.75

Magneto Coil Cover - This new J4 Coil Cover with Gasket fits Cub and Cub LoBoy with J4 Magnetos. Replaces 251502R11 (Part No: 251502R11)
$49.50

Magneto, Rebuilt - Rebuilt Type J-4 Magneto for Cub. 4-cylinder with right-hand flange mount. Add $100.00 core charge to price - this charge is refundable if you send your core to us. (Part No: R1196724)
$414.00

Point Set - For J-4 Magneto and IH Distributor. Replaces 21A161, 407018R91, 353172R1, 353172R91 (Part No: 353172R1)
$3.89

Rotor - Rotor for J-4 magneto with teeth. Note: rotor is the black part in this picture. Replaces: 351692R91, J4 Rotor. (Part No: 351692R1)
$42.00

Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: 353896R1)
$2.63

Spark Plug - For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154-Lo Boy, Cub 185-Lo Boy. Price shown is for EACH, shipped in lots of 4. Enter 4 in QUANTITY box. Replaces OEM number 360942R1. (Part No: AL386)
$2.24

Spark Plug Wire Set, Custom - IH or Delco Distributors. For tractor models Cub, A, Super A, B, BN, C, Super C, H, Super H, M, MTA, 300, 350, 400, 450. (Part No: S.67475)
$15.44

Starter Drive - For Cub and Lo-Boy 1947-1964, 3230, W9, 390. (Part No: 1850844)
$20.92

Starter Switch, Manual - Starter Switch, manual, saddle mount. For A, B, C, Cub, Cub Lo-Boy, Super A and AV, Super C, H, HV, Super H and HV, Super M and MV, Super W6 and WD6, 100, 130, 140, 200, 230. Saddle Mount, 2 mounting holes, 190 inside diameter. With 1-3/8 inch centers. Replaces Delco 1918405, 1932131, and OEM IH number 593292C1. (Part No: 1925781)
$2.93

Starter, New - Fits 1947-1952: Cub, MD, and 50 Baler. 1954-1955: Model 64 Harvester, Farmall Cub engine C-60. Replaces 1109603, 1109613. Starter does not come with a solenoid. (Part No: 1109611)
$158.63

Starting Switch Lever - Starting Switch Lever - Lever, pull rod starting switch. For 100, 130, 140, 200, 230, C, Cub, Cub Lo-Boy, H, HV, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A, WD6. Replaces: 1918322, 1919434 (Part No: 1918322)
$7.13

Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Part No: R7994)
$11.25

Tune Kit - This Tune Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo Boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Plugs, Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Part No: IHTK1)
$21.15

Tune Kit, Basic - This Basic Tune Kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Part No: ATK5BIR)
$15.30

Voltage Regulator - Regulator, 6 volt, positive ground, saddle mount, 4 terminal. Replaces Delco cut outs 1116766 and 1116809 when used with conversion kit VRK1815. For tractor models Cub, Cub Lo-Boy, A, Super A, B, C, H, M. Replaces: 1118265, 1118305, 1118790, 1118786. (Part No: VR1813)
$17.25

Voltage Regulator, 12 Volt (4 Terminal) - This Generator Voltage Regulator replaces Delco numbers 1118981 & 1118999. The Three Post side of this regulator may be parallel or slightly splayed. Fits the following Generators: 1100356, 1100401, 1100394, 1100395. For tractor models Cub Cadet 70 & 100, Cub & Cub Lo-Boy, 460, 560. Also replace part number VR1817, 121577C1. (Part No: 182548M92)
$16.88

Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 & 1119575. Fits tractor models: 100, 130, 140, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. (Part No: GDR6003)
$18.38

Voltage Regulator, Internal - Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 & 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Part No: 585624C1)
$5.93

Wire Harness - For 12 Volt conversion, Cub. (Part No: IHS3276)
$149.95

Wiring Harness, Main, 12V, 1964-68 - Fits Cub serial number 224401 and up, Cub Lo-Boy serial number 18701 and up. Original style with cloth covered laquered wire and cotton braid. Also replaces 387262R91. (Part No: 404353R1)
$118.45

Wiring Harness, Main, 12V, 1972-UP - For Cub serial number 239827 to 248124. Original style with cloth covered laquered wire and cotton braid. (Part No: 547142R1)
$102.56

Wiring Harness, Main, 6 Volt, 1947 to 1949 - For tractor models Cub (with serial number 501 to 99535) with Generator Relay Wire. Original style with cloth covered laquered wire and cotton braid includes front lights. (Part No: 351325R91)
$91.08

Wiring Harness, Main, 6V, 1950-1954 - For Cub, Cub Lo-Boy (serial number 99536 to 185000) without ground cable wire, with voltage regulator wire. Lights are single wire, no ground. Original style with cloth covered laquered wire and cotton braid. (Part No: 354252R92)
$103.50

Wiring Harness, Main, 6V, 1955-58 - Wiring Harness. For Cub (with serial number 185001 to 210000), Cub Lo-Boy (with serial number 501 to 10000) with lights, ground cable wire and voltage regulator wire. For use with lights requiring a ground wire. This is restoration quality all wires have original cloth wrap. (Part No: 363507R91-RES)
$97.98

Wiring Harness, Main, 6V, 1955-58 - NOT Restoration Quality (for "Working Tractor"). Wiring Harness, Main, 6 volt, 1955 to 1958. For Cub (with serial number 185001 to 210000), Cub Lo-Boy (with serial number 501 to 10000) with lights, ground cable wire and voltage regulator wire. For use with lights requiring a ground wire. Individual wires are plastic coated with bundle cloth wrapped. (Part No: 363507R91)
$59.22

Wiring Harness, Main, 6V, 1959-64 - For tractor models Cub serial number 210001 to 224400 and Cub Lo-Boy serial number 10568 to 18700. Does not include headlight wiring. Reproduction of original with cloth covered laquered wire and cotton braid. (Part No: 371032R91)
$114.54

Wiring Harness, Rear Light - This harness is for the switch to rear light. Original style. For tractor models (Farmall Cub and Cub Lo-Boy 1959 to 1964 serial number 210001 to 224400), (International Cub Lo-Boy serial number 10568 to 18700). (Part No: 371033R91)
$37.56

Wiring Harness, Rear Light with Ground - For tractor models Cub (serial number 185001 to 210000), Cub Lo-Boy (with serial number up to 10567). This harness is for the switch to rear light with ground cable 6-Volt. Length is 64 inches long. Restoration quality. (Part No: 363508R91)
$42.65

Wiring Harness, Rear Light without Ground - This harness is for the switch to rear light without ground cable 6-volt. For model Cub up to serial number 185000. Restoration quality with cloth covered laquered wire and cotton braid. (Part No: 358111R91)
$32.54

Engine Bearings
Main Bearing Set, .010 - For tractor models Cub Lo-Boy and Cub, .010 inch. For C60 engine with serial number less than ENGINE serial number <261717. (Part No: MBK60-010)
$56.21

Main Bearing Set, .020 - For Cub Lo-Boy and Cub, .020 inch. For C60 engine with serial number less than ENGINE serial number <261717. (Part No: MB60-20)
$110.46

Main Bearing Set, .030 - For Cub Lo-Boy and Cub, .030 inch. For C60 engine with serial number less than ENGINE serial number <261717. (Part No: MB60-30)
$91.14

Main Bearing Set, Standard - For Cub Lo-Boy and Cub, STANDARD Size. For C60 engine with serial number less than ENGINE serial number <261717 using rod with forging number 251246R13. If other than standard or forging number is different, specify size and number in comment Section. If .002 is needed the cost is $72.31 for this size. (Part No: MBK60)
$57.30

Piston Pin Bushing - Models: Cub, Cub Lo-Boy, engine serial number 261717 and below using Connecting Rod number 251246R13. (flat head piston) (rod bearing length .761 inch) (for sleeveless engines). If you order 1, you will get 1. Must be ordered in multiples of 4. (Part No: 251247R2)
$4.13

Rod Bearing - Single rod bearing, available in Std, .010, .020, .030. For tractor models Cub, Cub Lo-Boy with C60 engine and rod forging # 527457R11. (Part No: CB-998P)
$17.75

Rod Bearing Set - For Cub Lo-Boy and Cub. For C60 engine with serial number less than ENGINE serial number <261717. ** IMPORTANT-- NOTE ROD FORGING NUMBER (251246R13 - Available in: Standard, .002, .010, .020, .030. OR 527457R11 - Available in: Standard, .010, .020.) and specify size in Comments Box when ordering. (Part No: CRK60)
$45.87

Engine Gaskets
Crankcase Front Cover Gasket - The Front Cover Gasket Fits: Cub up to Serial Number 139516; Replaces original part numbers 351675R1 and 351675R2 (Part No: 351675R1)
$8.65

Crankcase Front Cover Gasket - This Front Cover Gasket Fits: Cub (serial number 139517 and up), Cub Lo-Boy, 154, 184, 185; Replaces: 355945R1, 355945R2. (Part No: 355945R1)
$8.65

Crankshaft Rear Oil Seal Retainer Gasket - This Crankshaft Rear Oil Seal Retainer Gasket is used on Cub, Cub Lo-Boy, U1, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. Replaces: 251364R1 (Part No: 251364R1)
$6.00

Gasket Set, Complete - Complete Overhaul Gasket Set For Cub Lo-Boy, Cub. For C60 Engine. Includes crankshaft seals. (Part No: GK7560S)
$82.73

Gasket, Head - Fits Cub, Cub Lo-Boy with serial number below 261717. (Part No: 251229R1)
$33.19

Gasket, Pan - Fits Cub, Cub Lo-Boy both with serial number below 261717. (Part No: 251369R1)
$8.33

Head Gasket Set - For C60 Gas engine in: Cub, Cub Lo-Boy. (Upper gasket set with head gasket). (Part No: VGK7560)
$44.56

Seal, Crankshaft, Front with wear sleeve - Front Crankshaft Seal. For 100, 130, 140, 200, 230, 240, 330, 340, Super A-1, Super AV-1, Super C, Cub serial number <261717, Cub Lo-Boy serial number <261717. (Part No: 378193R91)
$19.17

Seal, Crankshaft, Rear Main - Rear Main Oil Seal. Fits Cub, Cub Lo Boy, with serial number below 261717. (Part No: 364692R91)
$10.88

Engine Rebuild Kits
Engine Overhaul Kit, Comprehensive - For Cub and Cub Lo-Boy using C-60 4 cylinder gas engine with serial number 261717 and below using connecting rod number 251246R13 (or 251246R1). Contains Piston Kit (flat top pistons and rings, pins and retainers), for standard 2 5/8 inch bore, .020, .040, or .060 overbore. (specify when ordering in "comments"). Also contains complete gasket set, connecting rod bearing kit, main bearing kit, valve parts (intake and exhaust valves, springs, guides and keys). Available with standard, .010, .020 or .030 bearings. IMPORTANT: Specify Rod and Main bearing sizes and piston size in comments section. (Part No: EOKCUB)
$474.72

Valve Overhaul Kit - Fits Cub, Cub Lo-Boy (4cyl GAS-C60 CID). Kit includes Valves, Valve Springs (For Non-Roto Exhaust Valve), Valve Keys And Valve Guides. (Part No: VOKH60)
$114.54

Engine Parts
Camshaft, Reground - For Model: Cub with casting # 35568R1. (Part No: R1189547)
$162.07

Crankshaft - Fits Cub. Crankshaft uses standard main and rod bearings (not included). Order CRK60 for std. rod bearing set and MBK60 for std. main bearing set. Use connecting rods 251246R13. For C60 gas engine to serial number 261717. Add Additional $25 to standard shipping charges due to weight. Replaces: 353743R93, 353743R93, 527821R92, Casting #: 251264R1, 357247R1, 527456R1 *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: 353743R93)
$269.10

Crankshaft Pulley - Crankshaft Pulley For Cub. Inside diameter is 1.125 inches and 4.625 inches outside diameter. Press fit. This pulley is balanced and has timing marks. Does not fit 154, 184 or 185. (Part No: 251269R3)
$42.15

Cylinder Head - Cub Cylinder Head Fits C-60 engine in: Cub &Cub Lo-Boy. Replaces 251228R11, 351779R91. (Part No: 355691R2)
$193.75

Governor Spring - This Governor Spring is 1.572 inches overall length, 0.735 inch body diameter, 0.100 inch wire diameter. Fits Cub, Cub Lo-Boy. Replaces original part numbers 121709C1 and 251464R1. (Part No: 251464R1)
$8.95

Hand Crank Bracket - This new Hand Crank Bracket with Screw fits Cub, Cub Lo-Boy. Two are used per tractor, sold individually. Spring steel. Will not fit 154, 184, 185. Replaces 171573, 351013R1. (Part No: 351013R1)
$6.00

Hand Starting Crank - For Cub, Cub Lo-Boy. Hand Starting Crank WITHOUT Spinner. (Part No: 351010R31)
$29.63

Hand Starting Crank with Spinner - For Cub, Cub Lo-Boy. Hand Starting Crank WITH Spinner. (Part No: 351010R31-S)
$44.95

Intake Valve, Single - Intake Valve for Cub, Cub Lo-Boy, engine serial number 261717 and below using connecting rod number 251246R13. (Flat Head Piston) (Rod Bearing length .761 inch) (for Sleeveless Engines). Springs, guides and keys available at additional cost. QUANTITY 4 REQUIRED PER ENGINE, PRICED EACH. (Part No: 251260R1)
$13.26

Ring Gear, Flywheel - 84 teeth, 8.696 inch inside diameter and 10.678 inch outside diameter. For tractor models Cub, (184 Baler), 55T, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. (Part No: 251270R2)
$55.20

Valve Guide - For Cub and Cub Lo Boy both with serial number below 261717. Sold in quantities of 8, price is each. (Part No: 352973R3)
$5.68

Valve Keys, 16 Pieces - For Cub and Cub Lo Boy with serial number below 261717. Set of 16 halves included, is enough for 8 valves or 1 engine. (Part No: 46209D)
$5.52

Valve Spring - Valve Spring without rotocap. for Models: Cub, Cub Lo-Boy, engine serial number 261717 and below using connecting rod number 251246R13. (Flat Head Piston) (Rod Bearing length.761 inch) (For Sleeveless Engines). QUANTITY 8 REQUIRED PER ENGINE, PRICED EACH. (Part No: 251262R2)
$2.70

Valve, Exhaust - For Cub, Cub Lo-Boy, engine serial number 261717 and below using connectingrRod number 251246R13. (Flat Head Piston) (Rod Bearing Length.761 inch) (For Sleeveless Engines). Springs, guides and keys available at additional cost. QUANTITY 4 REQUIRED PER ENGINE, PRICED EACH. (Part No: 251261R2)
$20.76

Engine Pistons and Sleeves
Piston Kit - Raised Pistons - Pistons and Rings Kit for Cub and some Low Boys with C-60 standard 2 5/8 inch bore. Comes with 4 pistons with piston rings. (Part No: 405007R1-KIT)
$333.57

Piston and Ring Set, .020 - Kit for Cub includes .020 size pistons, rings, piston pins and clips. (Part No: PRK60-020)
$165.60

Piston and Ring Set, .040 - Kit for Cub includes .040 size pistons, rings, piston pins and clips. (Part No: PRK60-040)
$175.91

Piston and Ring Set, .060 - Overbore with Flat Top Piston .060. For tractor models Cub, Cub Lo-Boy with C60 engine (to serial number 264567). (Part No: PRK60-060)
$170.10

Piston and Ring Set, STD - Kit for Cub includes standard size FLAT TOP Pistons, rings, piston pins and clips. (Part No: PRK60)
$173.02

Engine Rings
Piston Ring Set - Complete Piston Ring Set for 1 engine at .060 overbore. (Part No: 2C7859.060)
$65.78

Piston Ring Set - Standard. Fits C60 engine in Cub, Cub Lo-Boy. 2-5/8 inch standard bore. 2 @ 3/32 inch, 1 @ 3/16 inch. Complete set for 1 engine. (Part No: PRS60)
$37.28

Piston Ring Set, .020 - Fits C60 engine in Cub, Cub Lo-Boy. Complete set for 1 engine. (Part No: PRS60-020)
$45.21

Piston Ring Set, .030 - Fits C60 engine in Cub, Cub Lo-Boy. Complete set for 1 engine. (Part No: R3378R)
$68.93

Piston Ring Set, .040 - Fits C60 engine in Cub, Cub Lo-Boy Complete set for 1 engine. (Part No: PRS60-040)
$43.44

Exhaust System
Curved Stack Pipe, Chrome - Deluxe double-walled chrome curved stack. Same as R4444 except top of pipe is curved. Clamps to existing piping. Fits Cub. (Part No: R4445)
$99.23

Exhaust Elbow - For horizontal exhaust between manifold 251232R91 and exhaust 363116R91. Use Clamp 362361R1. For Cub and Cub Lo-Boy (Part No: 362359R1)
$46.85

Exhaust Pipe - For tractor models: Cub, Cub Lo Boy (Lo Boy up to serial number 248124 with upright exhaust). The pipe is 17 inches long with a 1 3/8 inch outside diameter. (Part No: 350960R1)
$17.67

Exhaust Pipe, Chrome - Deluxe Double-walled chrome straight pipe for cub. These clamp to an existing piece of exhaust pipe. (Part No: R4444)
$93.77

Manifold - For Cub. Replaces 405023R2 and 251232R1. Manifold Gasket number R0834G is available separately. (Part No: R0834)
$62.10

Manifold - This new manifold comes with manifold, gaskets and pipe to connect to the muffler. Fits Cubs with Zenith style carburetors. The pipe has a 1-3/8 inch outside diameter. Replaces 21116R1, 251232R1 and 405023R2. (Part No: 405023R2WGP)
$68.93

Manifold Gasket Set - This gasket set is used on Cub and Cub 154 Lo-Boy Tractors. Used with 405023R2 and 251232R1 manifolds. Replaces: 251233R1, 251233R2, Carb Gasket: 251235R1, 352540R92 (Part No: R0834G)
$9.30

Muffler - For Cub. Muffler A: 2 3/4 INCH INLET LENGTH B: 1 3/8 INCH INLET INSIDE DIAMETER C: 12 1/2 INCH SHELL LENGTH D: 6 3/4 INCH OUTLET LENGTH E: 1 1/2 INCH OUTLET OUTSIDE DIAMETER F: 22 INCH OVERALL LENGTH. Vertical. Has round body (3 1/4 inch shell diameter). (Part No: 351436R92)
$27.22

Muffler Clamp With Hardware - Muffler clamp with hardware. For model Cub. (Part No: 351437R1)
$13.86

Muffler, Underslung - Restoration quality with IH logo and part number stamped on side, horizontal with galvanized finish. Exhaust pipe 1.375 inch outside diameter x 9.5 inch length, body 3 inch diameter x 10.875 inch length, intake pipe 1.313 inch inside diameter x 1-7/8 inch length. For tractor models Cub, Cub Lo-Boy. (Part No: 363116R91)
$39.55

Fuel System / Air Intake
Air Cleaner Cap, Slides INTO Pipe - 3.06 inch body diameter, internal fit 1 1/4 inch outside diameter. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to serial number 355669. This cap slides INTO the pipe. Replaces: 350750R91. (Part No: R4744)
$24.75

Air Cleaner Cap, Slides OVER pipe - 4 1/8 inch body diameter, external fit 1 3/8 inch inside diameter. For tractor models Cub, Cub Lo-Boy, A, AV, B, BN, Super A to serial number 355669. This cap slides OVER the pipe. (Part No: 350750R91)
$35.89

Air Cleaner Tube - For model Cub up to Serial Number 248124. (Part No: 350752R1)
$14.25

Carburetor Adapter - Rubber Air Hose Adaptor, adapts Zenith 13794 Carburetor to air cleaner tube. Approximately 2 inches long, approximately 1 1/4 inch inside diameter and 1 5/8 inch inside diameter. For IH-Cub only. (Part No: CubADAPTOR)
$18.75

Carburetor Float - This carburetor float is used for the following tractor models: 100, 130, 140, 200, 230, 240, 330, 340, 404, A, B, C, Cub, Lowboy 184, Super A, and Super C all using Zenith carburetor models: 11340, 11704, 11340, 11704, 12122, 12613, 12632, 12911, 12115, 12285, 12342, 12225, 8928, 9749, 9167, 9752, 11188, 10514, 10498, 10386, 10441, 13794, 13781, 10522, 11115, 11338, 11339, and 14007. (Part No: CTP28)
$16.50

Carburetor Float - For Cub, Lo-Boy with C60 gas engine. Carburetor Float with Lever with Original Carburetors 251234R94 or 364579R91. (Part No: 251293R1)
$15.00

Carburetor Idle Tube - This Carburetor Idle Tube is used on IH Carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91. Used between 1947 and 1974. It replaces original part numbers 251331R1, 352140R1 (Part No: 251331R1)
$10.00

Carburetor Kit, Basic - Kit for Zenith 11338, 11339, 12115, 12122, 12225, 12262, 12342, 12493, 12522, 12773, 12911, 13727, 13781, 13794, 13800, 13873, 13876, 13879, 13902 Includes Gaskets, Needle, & Seat. For tractor models 130, 140, 200, 230, 240, 404, Cub, Cub 184 Lo-Boy, Cub Lo-Boy, Super A. (Part No: Z103)
$28.21

Carburetor Kit, Basic - Kit contains: Needle & Seat Valve, 2 Gaskets, Throttle Shaft, 2 Bushings, 6 Sealing Washers. For Cub, Cub 154. For IH Carburetors 251234R94 or 364579R91.(66447S) (Part No: 63349C91)
$16.80

Carburetor Kit, Basic - Basic Repair Kit for Zenith Carburetor 13794/68YY7. Contains throttle shaft, float valve, float lever pin and gaskets for minor carburetor overhaul. For Cub, engine serial number 312390 and up. (Part No: BK19V)
$27.03

Carburetor Kit, Comprehensive - For IH Carburetors 63349C91, 251234R94, 364579R91, 405004R91. Includes Gaskets, Needle, Seat, Throttle Shaft, Choke Shaft, Discharge Tube, Main Jet, & Idle Jet. For model Cub. (Part No: R5097)
$44.25

Carburetor Main Jet 035 - Carburetor Main Jet 0.035 inch (Large Throat. Cub (1957 to 1974). Replaces: 364610R91 IHS1463. Carb Manufactures number's - Carburetor's with 'IH' on float bowl: 364579R91 Brass finish --- 0.375 inch Hex x 0.940 inch long with 0.035 inch Jet. (Part No: 364610R91)
$6.60

Carburetor Main Jet 030 - Carburetor Main Jet 0.030 inch (small throat. Fits Cub, 1947 to 1956 with one of the following IH Carburetors; 251234R91, 251234R92, 251234R93, 251234R94. Replaces: 351804R1, 354192R91, IHS1461. Brass finish --- 0.375 inch hex x 0.940 inch long with 0.030 inch Jet. (Part No: 354192R91)
$6.60

Carburetor Nozzle, 0.060 - Carburetor's with 'IH' on float bowl: 251234R91, 251234R92, 251234R93, 251234R94, 251293R91. 0.3125 inch hex x 1.777 inches long x 0.122 inch tube with 4 discharge holes. 0.060 inch hole. Replaces 352138R31. (Part No: 352138R31)
$3.23

Carburetor Nozzle, 0.100 - For IH Carburetors 63349C91, 251234R94, 364579R91, 405004R91. 0.3125 inch hex x 1.777 inches long x 0.122 inch tube with 0.100 inch hole --- 6 discharge holes. Replaces original part numbers 251332R11 and 355717R11. (Part No: 251332R11)
$3.38

Carburetor Throttle Shaft - This Carburetor Throttle Shaft is used on IH Carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91. Used between 1947 and 1974. It replaces original part numbers 351845R11 (Part No: 351845R11)
$13.43

Carburetor, New - Designed just like the original carburetor. This Cub carburetor does not come with a choke lever. If a choke lever is needed, we have one available (Part number 351324R1 sold separately). Used on: Cub & Cub Lo-Boy using C60 Gas engine. Replaces 251234R94. (Part No: 364579R91)
$255.30

Carburetor, New - Aftermarket replacement for 13794 outperforms the original carburetors: 251234R94, 4055004R91, 63349C91 70949C92, 71523C92. This carburetor comes with studs which attach to the carburetor. The mounting bolts spacing measures 1 13/16 inches center-to-center. 1 year warranty. For models using the above listed carburetor numbers on models used on: 1974 to 1979 Cub and Cub Lo-Boy using C60 gas engine, serial number 312390 and up. Will fit serial number 312390 and below using our custom intake air hose (see part number CUB ADAPTOR). Note: The replacement carburetor inlet diameter is larger than original (for more power). Air inlet is 1-5/8 inch outside diameter. Carburetor is a replacement, not like original. (Part No: 13794B)
$183.47

Carburetor, New - This Zenith carburetor outperforms the original carburetor used on: 1974 to 1979 Cub and Cub Lo-Boy using C60 gas engine, serial number 312390 and up. Will fit serial number 312390 and below using our custom intake air hose (see part number CUB ADAPTOR). Note: The replacement carburetor inlet diameter is larger than original (for more power). Air inlet is 1-5/8 inch outside diameter. Carburetor is a replacement, not like original. Center to center on the 2 mounting bolts is 1-13/16 inches. Made in USA, 1 year warranty. (Part No: 13794)
$291.18

Carburetor, Rebuilt - Fits Cub - replacement for OEM 63349C1, 251234R92. Add $50.00 core charge to price - this charge is refundable if you send your rebuildable core to us. (Part No: 1402-CARB)
$177.51

Choke Lever - With stainless set screw, used on Carburetors with "IH" on float bowl. For tractor models: Cub, Cub Lo-Boy. Not for 154, 184 or 185 as these used a cable and not a rod type for choke. Used with carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91, 63349C91. (Part No: 351324R1)
$30.00

Choke Shaft - This Choke Shaft is used on IH Carburetors 251234R91, 251234R92, 251234R93, 251234R94, 251293R91, 364579R91, 63349C9, 63349C91 Replaces original part numbers 251309R12, 352562R12. (Part No: 20100)
$6.44

Comprehensive Carburetor Kit - For tractor models Cub and Cub 154 Lo-Boy. Use with International carburetor number 63349C91, 251234R94, 364579R91, 405004R91 (Part No: R7528)
$54.51

Fuel Cap - For A, Super A, AV, B, BN, C, Super C, H, Super H, M, Super M, Super MTA, Cub, Cub Lo-Boy, 100, 130, 200, 230, 300, 350, 400, 450. Tall Cap is 2 1/2 inches tall, Triple Baffle Style. (Part No: R3654)
$30.00

Fuel Cap - Black - (Vented) - Black Fuel Cap. REPLACES : 361910R91, 538063R1, 224839C91, 224839C92. Fits MOST: A, C, Cub, Cub Lo-Boy, Cub 185-Lo-Boy, H, M, MD, Super A, Super C, Super H, Super M, Super W4, Super W6, W6, W9, 100, 130, 140, 184, 200, 230, 300, 330, 340, 350, 400, 403, 404, 424, 444, 450, 460, 503, 504, 544, 560, 606, 615, 656, 706, 715, 756, 766, 806, 815, 826, 856, 915, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1640, 1660, 1670, 1680, 2404, 2424, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2856, 4156, 4166, 4186. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 23995DC)
$7.37

Fuel Cap, Chrome, Unvented - Fits MOST of the following GAS and Diesel tractors: Cub, Cub Lo-Boy, A, Super A, B, C, Super C, H, Super H, M, Super M, 04, 06, W4, W6, Super W4, Super W6, W9, 100, 130, 140, 4156, 4166, 4168. Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. (Part No: 23995DC-CHROME)
$8.03

Fuel Cap, Top Vented - 2-11/16 inch inside diameter, 1.500 inch height (including splash guard) and 1.118 inch height cap only. Says "Buy Clean Fuel Keep it Clean". For tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy (WILL NOT FIT 154, 184, 185), F12, F14, F20, F30, H, HV, I4, I6, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MV, Super W4, Super W6, Super WD9, Super WDR9, T4, T5, T6, T9, TD14, TD14A, TD15, TD18, TD18A, TD20, TD6, TD9. (Part No: 12770D)
$10.50

Fuel Cap, Vented - For MOST Models: A, Super A, B, C, Super C, H, Super H, M, Super M, Cub, 100, 130, 200, 230, 300, 350, 400, 450. Says Buy Clean Fuel . Cap fits neck inside diameter of 1 7/8 inches using 2 locking tabs. Replaces IHS226, AR369R, AD709R, AH83351, B824, 7A824, 161945A, 30-3049558. (Part No: 23995DA)
$4.23

Fuel Line - This steel fuel line fits Cub and Cub Lo-Boy, both with vertical or underslung exhaust using Zenith carburetors. It WILL NOT fit tractors with IH carburetors. The outside diameter on this fuel line is 5/16 inch. Note: Will not fit 154, 184, 185 or tractors with IH carburetors. Replaces: 63499C91. (Part No: 63499C91)
$29.25

Fuel Line - The steel fuel line fits Cub and Cub Lo-Boy, both with vertical exhaust and using original IH carburetor only, will not fit tractors with Zenith carburetors. If your Cub is equipped with a horizontal muffler and IH carburetor, then use part number 362358R11. If you have a Zenith carburetor, use part number 63499C91. This line will not fit 154, 184, 185 or tractors with Zenith carburetors. Replaces: 350968R11 (Part No: 350968R11)
$25.65

Fuel Line - The steel fuel line fits Cub and Cub Lo-Boy, both with horizontal (underslung) exhaust and using original IH carburetor only, will not fit tractors with Zenith carburetors. If your Cub is equipped with a vertical muffler and IH carburetor, then use part number 350968R11. If you have a Zenith carburetor, use part number 63499C91. This line will not fit 154, 184, 185 or tractors with Zenith carburetors. Replaces: 362358R11, 369992R11 (Part No: 362358R11)
$35.40

Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D (Part No: NAA9160A)
$0.29

Precleaner Assembly - Complete, glass dust bowl assembly, 1-3/8 inch inside diameter base, just like the original. For tractor models A, Cub, B, Super A (to serial number 355669). (Part No: 356254R91)
$48.30

Precleaner Bowl - Glass bowl for pre-cleaner assembly 335261R91, 356254R91. (Just like the original). Tractors: Super A (serial number 356001 and up), Super A-1, C, Super C, 100. 130, 140, 200, 230, 240, 340, A, Cub, B, Super A (up to serial number 355669). (Part No: 64178D)
$6.17

Sediment Bowl Assembly - For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Part No: 61782C91)
$15.98

Throttle Control Assembly - For Cub. (Part No: 351005R1)
$47.61

Gauges
Ammeter Assembly - (30-0-30) 2 inch body diameter. Replaces, 393334R91, 354473R91, 360053R91, 378424R91. For tractor models 140 serial number 57724>, 2400A, 2500A, 454, 464, 574, 674, Cub serial number 248125>, Cub 184. (Part No: 536229R1)
$6.81

Amp Gauge - D-O-C Style - with IH Logo For Super A, Super C, H, Super H, M, Super M, Super MTA, Cub (From 1955), W4, W6, 200, 230, 240, 300, 350, 400, 450. Replaces 393334R91, 378424R91, 360053R92, IHS395. (Part No: 360053R91)
$8.24

Amp gauge - Gauge, ammeter has 20-0-20 range. Original style with IH Logo. Fits 2 inch diameter hole, stainless steel bezel, black background, white letters and white pinter for tractors: Cub, A, B, Super A, A1, AV, AV1, C, Super C, H, HV, Super H, HV, M, MV, MDV, MD, Super M, MTA, O-4, OS-4, O-6, OS-6, W4, W6, WD-6, W-9, WR-9, WDR-9. Replaces 725-3023, 925-3141, IHS418. (Part No: 354473R91)
$8.24

Oil Gauge, Engine Mount - For Cub, Cub Lo-Boy, Super A, AV C, Super C, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400. Oil Pressure Gauge, 0 to 75 psi. 2 inch IH logo on face. Does not come with bracket to mount in dash- screw in engine mount. (Part No: 364665R91)
$44.25

Oil Pressure Gauge - Zone Style - with IH Logo without Studs For Cub. (Part No: R3699)
$46.46

Tachometer Cable Connector - This new tachometer cable connector housing retainer clip (Thrust Stop) is used to retain part numbers 369695R1 (Tachometer Drive Assembly) and 369692R1 (Tachometer Cable Connector) into part number 363749R91 Distributor Housing Drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: 369693R1. (Part No: 369693R1)
$2.50

Tachometer Cable Connector Housing - This New Tachometer Cable Connector Housing is used with 369695R1 Nylon gear with metal shaft. Will also need to order tach drive gear 369695R1 & 369693R1 clip for 300, 330, 350, 400, 450, 600, & 650 if replacing ALL NYLON gear/shaft drive. Fits Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 369692R1 (Part No: 369692R1)
$43.96

Tachometer Connection Housing Plate - Tachometer Connection Housing Plate with gasket. Used with part number 363749R91 distributor housing. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces: Plate: 363817R1, Gasket: 363814R1, 363814R2. (Part No: 363817R1)
$7.95

Tachometer Drive Assembly - This new Tachometer Drive Assembly is used with part number 363763R11 cast distributor mounting housing with provision for drive. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. For IH distributor systems only. This part does not replace all nylon style gear/shaft number 363816R1 that was original on 300, 330, 350, 400, 450, 600, 650, unless the connector housing part number 369692R1 is ordered along with the 369693R1 clip. Replaces: 369695R1, 369695R91. (Part No: 369695R1)
$45.61

Hitch / Drawbar
3 Point Conversion Kit - For IHC/Farmall Model: Standard Cub - Cat. 0/I (Not for Lo-Boy or Cadet Lawnmower)(Uses existing hydraulic lift). Additional $80 shipping due to weight. ALLOW 2 TO 4 WEEKS DELIVERY TIME. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HK90)
$1046.04

Drawbar Bracket - Left hand drawbar bracket for the Cub. 3673 (Part No: 350964R11)
$27.53

Drawbar Bracket - Right hand drawbar bracket for the Cub. 3674 (Part No: 350965R11)
$27.53

Lower Latch Spring - Used with 393500R1 latch. Replaces OEM part number 522840RA. For tractor models 21026, 2504, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Cub, Cub Lo-Boy, Hydro 100, Hydro 70, Hydro 86, 100, 1026, 1206, 130. (Part No: 522840R2)
$6.12

Swinging Drawbar - For Cub (Part No: R3671)
$104.52

Hydraulic System
Hydraulic Touch Control Block Gasket and O-Ring Kit - Fits tractor models Cub, Cub Loboy; Replaces: 352024R1, 350667R1, 350684R1, 253070R1, 351989R7, 352221R1, 350658R1, 75285739, 9706714, 843092, 411205R1, 354008R93, 354008R94, 354008R95, 360713R92, 360713R91, 411205R2, 238-5324, A175513, 351989R6, 238-6326, 355966R1, 350672R1, 352034R1, 49861, 355967R1, 86505727, 461173R1, 352004R1, 13727D, 254691R1, 238-5113, 351989R4, 355967R1, 253070R1, 9672467, 86553262, 351983R1, 352034R2, 252738R1, 128999. Fits both early and late touch control blocks. Some applications may have extra O-rings and/or washers. There are 24 pieces in this gasket and O-ring kit. (Part No: IHS3027)
$44.63

Touch Control Stop - Fits C, Cub, Super A, Super C, 100, 130, 140, 200. Cub uses 2 per tractor, other models use 4 per tractor. Sold individually. Will Not Fit 154, 184, 185 Replaces: 350717R91 (Part No: 350717R91)
$12.87

Implements
Fertilizer Hopper Assembly - For one row side dresser. Made with extremely durable, tough plastic that will not rust like the original! The base is cast iron with new gears. Must have a side dresser to accommodate this fertilizer hopper. Note, does not include adjustable quadrant. 10 inch casting diameter. You must have the side dresser attachment to bolt this hopper to. For tractor models Cub, Super A, Super C, 100, 130, 140, 200, 230, 240. Replaces 626461R91 and 620720R91. (Part No: 626461R91)
$321.75

Lights
Headlight Assembly - 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB-12V)
$43.05

Headlight Assembly, Flat Back - 6 Volt - For Farmall Cub, Cub Lo-Boy, C, Super C after serial number 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV, also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM number 357884R94. Flat-Back (not teardrop). Primered red. Price is for one complete headlamp assembly. (Part No: 357884R91-6V)
$41.33

Headlight Assembly, Flat Back, 12 Volt - For Farmall Cub, Cub Lo-Boy, C, Super C After 159455, M, MV, MD, MDV, MTA, Super MD, Super MDV. Also for Model 100, 130, 140, 200, 230, 240, 300, 350 Utility, 330, 340, 400, 450. Replaces OEM# 357884R94. Flat-Back (not teardrop) Primered red. Price is for one complete headlamp assembly. (Part No: 357884R91-12V)
$42.57

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5 inches in diameter. Price is for one headlamp assembly. Does not include mounting bracket. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W4, Super W6, Super A, W4, W6, W9, WD6, WD9. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB)
$44.34

Headlight Lens - Replacement Glass Lens is 4.75 inch outside diameter for IH (45640DB) Headlight Assemblies. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super W4, Super W6, W4, W6, W9, WD6, WD9. (Part No: GC200)
$12.84

Headlight Lens - For tractor models 100, 130, 140, 200, 230, 240, 300, 350, Farmall 300, 350 Utility, 330, 340, IH & Utility 240, 400, 450, Farmall Cub, Cub Lo-Boy, Farmall C, M, MV, MD, MDV, Super MD, Super MDV. (Part No: 357884R94)
$11.70

Headlight Lens Gasket - Gasket, 4 5/8 outside diameter for lens in sealed beam units 358890R92. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: 358892R91)
$3.56

Headlight Reflector - 4 inch - This headlight reflector repairs OEM " Flatback" type headlights 45640DB and AA3075R. Does not come with bulb. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WD6, WDR9. (Part No: S.02377)
$8.64

Headlight Trim Ring - Moulding trim ring for 5 inch teardrop headlights or rear lights on tractors (painted). For tractor models 100, 130, 140, 200, 230, 240, 300, 340, 350, 400, 450, 600, 650, A, AV, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super C, Super H, Super HV, Super M, Super MD, Super MTA, Super WD9, Super A, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S. (Part No: 53525DA)
$14.25

Knob - Knob for combination rear light and tail light switch (used only with switch body with 15/32 inch shaft). For tractor models 100, 130, 200, 230, 300, 330, 340, 350, 400, 450, 600, 650, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W6, Super WD9, Super A, WR9S. (Part No: 359773R91)
$4.88

Light Bracket - For tractor models Cub, Cub Lo-Boy. Rear light bracket. (Part No: 352121R11)
$26.25

Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Part No: 373662R91)
$8.39

Light Clamp - Clamp, lamp assembly for tractors. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650, A, B, C, Cub, Cub Lo-Boy, H, M, MD, O4, O6, OS4, OS6, Super C, Super H, Super M, Super W6, Super A, W4, W6, W9, WD6, WD9. (Part No: 350920R1)
$9.00

Light Switch Knob - Old style for rotary light switches. For tractor models A, AV, B, BN, C, H, HV, M, MD, MV, MDV, W4, W6, W9, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, I9, ID6, ID9, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super MV, Super MDV, Super MTA, Super W4, Super W6, Super W6TA, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, Cub. (Part No: 57313D)
$10.50

Light Switch, 12 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5362)
$48.34

Light Switch, 12 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5364)
$47.06

Light Switch, 12 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5366)
$48.34

Light Switch, 12 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5368)
$48.34

Light Switch, 6 Volt - 4 position with Old style knob, replaces cut out switch when converted to regulator. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5361)
$48.34

Light Switch, 6 Volt - 3 position with Old style knob, with regulator only. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5363)
$47.01

Light Switch, 6 Volt - 4 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5365)
$48.34

Light Switch, 6 Volt - 3 position with new style knob. For tractor models A, AV, B, BN, C, Cub, Super A, Super AV, Super C, H, HV, M, MD, MV, MDV, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MV, 100, 130, 140, 200, 230, 240, 300, 350, 400, 450, W400, W450, W4, W6, W9, Super W6, Super W6TA, Super W4, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, ID6, I9, ID9. (Part No: R5367)
$48.34

Rear Combo Light - 6 Volt Rear Combo Light Assembly with Red Jewel Light with rotary switch. For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. Replaces 355914R91. (Part No: 355911R91)
$63.44

Rotary Light Switch. Early - This 4 position, 6 volt light switch is for models with CUT OUT RELAY, not a voltage regulator. Cut our telays have 2 terminals on one side and 1 terminal on the other. Voltage regulators have 3 terminals on 1 side and 1 terminal on the other. OFF is a position (of the 4). For models A, AV, B, H, M, MV, O4, O6, OS4, OS6, W4, W6, WR9, C, Cub, HV, W9, WD6, WD9. Replaces 57310DX, 57310DY and 1994019. (Part No: 47890DX)
$67.31

Sealed Beam 6 Volt - This sealed beam bulb is 6 volts, fits a 4 5/8 inch outside diameter flatback style light. Bulb measures 4.375 inches outside diameter. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR9. Verify dimensions. (Part No: 358890R92-6V)
$36.75

Sealed Beam Assembly - 6 Volt For A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, Cub, 100, 130, 140, 200, 230, 240. (Part No: R2714)
$52.03

Sealed Beam Bulb 12 Volt - Light, 12 volt sealed beam unit. For 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super H, Super HV, Super M, Super MD, Super W4, Super W6, Super WD6, Super WD9, Super A, WDR6, WDR9 (Part No: 358890R92-12V)
$36.75

Sealed Beam Bulb, Red & White - 4.5 inch diameter. For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. (Part No: 371461R92)
$20.23

Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908). (Part No: 376851R92)
$29.33

Switch, Worklight, with Knob - For tractor models Cub, Cub Lo-Boy, A, Super A, C, Super C, H, Super H, M, Super M, 100, 130, 200, 230, 300, 330, 340, 350, 400, 450. Replaces 359682R91. (Part No: 375653R92)
$14.67

Tail Light Lens - 5 inch lens, combination rear light and tail light. For 100, 130, 200, 230, 300, 340, 350, A, B, C, Cub, Cub Lo-Boy, H, HV, M, MD, Super AV, Super C, Super M, Super MTA, Super W4, Super W6, Super WD6, Super A. (Part No: 350478R1)
$12.46

Oil System
Oil Filter Element Type - For tractor models Cub, Cub Lo-Boy ALL with 60 GAS ENGINE. Overall length of 4 1/2 inches, diameter of 2 1/4 inches. (Part No: 376373R91)
$8.37

PTO / Driveline
PTO Adapter - 2.250 inches long, .969 inch 10 spline inside diameter female end, 1.375 inch 6 spline outside diameter male end. WARNING: The use of PTO adapters can be hazardous if not used with adequate protection such that ASABE standard S318.16 requires suitable shielding be provided "for any device intended for installation between the tractor PTO shaft and the implement input driveline". (Part No: PA13)
$43.69

PTO Bearing Kit - Fits Cub, Cub LoBoy. Replaces: Ball bearing: A31260, snap ring: 369875R1, 69696D, (Subs for 351271R91) lip seal: 126107C1. DOES NOT FIT 154, 184, 185 (Part No: IHS007BK)
$56.51

PTO Seal - For Cub, Cub Lo-Boy. (Part No: 126107C1)
$6.43

PTO Shaft - For Cub, Cub Lo-Boy. PTO Shaft 11.54 inch long. Replaces: 351269R11, 351269R21, 351269R4, 368433R91. (Part No: 351269R4)
$58.65

PTO Shaft Guard - With clamp. For model Cub. (Part No: 54001DX)
$33.08

PTO Shift Collar - For Cub, Cub Lo-Boy. Collar has 6 spline, spline diameter of 13/16 inches, outside diameter 1 7/8 inches, and length of 1 3/8 inches. (Part No: 351286R2)
$34.50

PTO Shift Lever Guide - For tractor models Cub, Cub Lo-Boy. (Part No: 351967R1)
$7.50

PTO Shift Lever and Shaft - Replaces 351287R11 shaft, 351970R31 lever, 351968R1 collar & 351969R1 spring. For tractor models Cub, Cub Lo-Boy. (Part No: 351287R11)
$34.60

PTO Shifter Rod Assembly - For tractor models Cub, Cub Lo-Boy. (Part No: 351970R31)
$26.10

Paint
Paint, Cub Yellow, Aerosol, 6 Cans - ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. This is a special order item please allow up to two weeks for delivery. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP915SP)
$49.80

Paint, Cub Yellow, Gallon - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. This is a special order item please allow up to two weeks for delivery. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP915GAL)
$58.31

Paint, Cub Yellow, Quart - High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. This is a special order item please allow up to two weeks for delivery. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP915QT)
$22.14

Seats
Pan Seat 4-Bolt Mount - Pan Seat with silver padded canvas. Center brass drain hole over metal pan seat frame. For: C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 3 50, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0906)
$168.93

Pan Seat 4-Bolt Mount - Pan Seat with a red and white vinyl cover. For C, Super C, Super H, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: 357518R91)
$141.67

Pan Seat 4-Bolt Mount - Black vinyl padded cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R0903)
$137.93

Pan Seat 4-Bolt Mount - Silver canvas cushion with steel pan seat. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. (Part No: R1113)
$145.52

Pan Seat 4-Bolt Mount with Brass Drain Hole - Red and white vinyl with brass drain hole with 4 bolts. For C, Super C, H, HV, M, Super M, MD, MV, MDV, MTA, Super MTA, Cub, Cub Lo-Boy, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 606, 2404, 2504, 2606. Replaces 357518R91. (Part No: R0905)
$94.88

Seat Back - Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Part No: R3656)
$43.54

Seat Bottom - Silver Canvas on Wood For A, Super A, B, Cub, Cub Lo-Boy, F100, F130, F140, F203, F303, F315 (Part No: R3655)
$59.61

Seat Cushion, Back, Black - 6 INCHES, BLACK VINYL. Fits Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND/CONST. (Part No: 363219R91-1)
$39.00

Seat Cushion, Back, Grey - BACK CUSHION, SAME APPLICATION AS 363220R91 (19-1/2 inches X 5 inches). FOR DELUXE SEAT. Grey COLOR MATCHED TO ORIGINAL. FITS Cub, 100, 130, 140. (Part No: 363219R91)
$31.63

Seat Cushion, Base, Black - Wood Base, Black Vinyl. Fits Cub, Cub 154 Lo-Boy, 220, 100, 130, 140, 203, 300, 303, 315, 330 UTIILITY, 350, 403, 460, 503 2429>, A, ALL COTTON PICKERS, B, Super A, 212 IND/CONST. (Part No: 363220R91-1)
$29.97

Sheet Metal / Body Parts
Battery Box - For Farmall Cub. Includes lid. Replaces 351334R1. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 538609R1)
$46.26

Battery Box - For tractor models Cub, Cub Lo-Boy. Complete Battery Box with lid hold downs and wing nuts. Restoration Quality. (Part No: 538609R2)
$96.53

Battery Box Front Cover - For Cub, Cub Lo-Boy. Battery Box Front Cover. Restoration Quality. (Part No: 351334R1)
$21.79

Battery Box Top Cover - For Cub to serial number 224400, Cub Lo-Boy to serial number 18700. Battery Box Top Cover Assembly. (Part No: 351336R91)
$53.62

Battery Hold Down Rubber - 3/4 inches tall, inserts into the retainers in the battery box lid. For tractor models Cub, Cub Lo-Boy, A, AV, B, (BN, C 51690D), AI, H, HV, M, MV, MD, MDV, W6, W9, WD6, Super A, Super C, Super H, Super HV, Super M, Super MTA, Super W6, 100, 130, 140, 200, 230, 600, 650. Replaces: 51690D. (Part No: R5103)
$4.50

Fender, RH/LH - Left and right are the same, sold individually. For tractor models Cub, Cub Lo-Boy. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 350961R12)
$111.75

Front Bar Grill with Screen - For Cub serial number 185001 to 210000, Cub Lo-Boy up to serial number 10000. (Part No: 362372R11)
$222.70

Front Grill Screen - For Cub. Just like original screen. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 350979R11)
$75.90

Hood Extensions - For Cub. Also called dog legs . Price is for a pair, replaces 350984R11. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 350985R11)
$36.75

Toolbox - For Late Cub with Deluxe Seat and Lo-Boy. (Part No: 364072R91)
$29.20

Toolbox - For Farmall Cub. Replaces 351014R91. For early Cub without Deluxe Seat. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. Replaces: 351014R91 (Part No: 351014R91)
$42.78

Steering
Rie Rod Clamp - This Tie Clamp is priced each It must b ordered in quantities of 2. If you order quantity of 1, your order will be adjusted to quantity of 2. 2 used per tractor. (Part No: 350784R1)
$16.35

Seal - Additional seal for use with WBKIH11 wheel bearing kit for models Cub and Cub Lo-Boy. Replaces 350769R91, 6312. (Part No: 350769R1)
$34.83

Spindle - Right Hand - This Right Hand Spindle fit a Cub, Cub and Lo-Boy. The vertical shaft measures 6.625 inches in height and .998 inches diameter. (Part No: 364010R92)
$168.40

Spindle, LH - This Left Hand Spindle fit a Cub, Cub and Lo-Boy. The vertical shaft measures 6.625 inches in height and .998 inches diameter. (Part No: 364009R92)
$170.10

Steering Shaft Support Knuckle - For tractor models Cub, Cub Lo-Boy. (Part No: 350902R3)
$32.43

Steering Wheel - 14-3/4 inch diameter, 3/4 inch hub, for keyed shaft. For Cub, A and Super A to serial number 355669, B and C to serial number 75097. Bare Metal Spokes. (Part No: 60069D-OE)
$31.13

Steering Wheel Nut - This steering wheel nut fits the following tractor models: Cub Cadet 100, Cub Cadet 102, Cub Cadet 122, Cub Cadet 70, A, AV, AV1, B, BN, C, H, HV, I4, I6, I9, ID6, ID9, M, MD, MDV, MTA, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A1, Super AV, Super AV1, Super C, Super H, Super HV, Super M, Super MD, Super MDV, Super MDVTA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, Super WD6, Super WD6TA, Super WD9, Super WDR9, W4, W6, W9, WD6, WD9, WDR9, WR9, WR9S, 100, 130, 200, 230, 600, 650, Cub Lo-Boy, 300, 400, 450, and Cub. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 114499, 122403, and 219753. (Part No: 353435X1)
$0.44

Steering Worm Shaft Seal. - This lower steering worm wheel shaft measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. It is the seal for splined shaft that center tie rod arm mounts on. Replaces 350891R91, 358801R91, 358836R91, 370510R91, 371410R91, 515448R91. (Part No: 195501M1)
$3.75

Tie Rod End - This tie rod assembly fits the following tractor models: Cub and Cub Loboy. It includes the seat, part number: 350780R1 and set screw, part number: 350781R1. It measures 2.752 inches overall length and has 1/2 - 20 NF threads. Please note that two are used per tractor and they are sold individually. (Part No: 350779R1)
$60.38

Tie Rod, Notched - This Tie Rod is notched for adjustable front axle Cubs. 13 5/8 inches overall length with 1/2 inch diameter. Threaded end is 1/2 inch NF thread. (Part No: 350778R1)
$29.50

Tie Rod, with Ball End - This Tie Rod with Ball End is for adjustable front axle Cubs. 14 11/16 inches overall length. (Part No: 350782R11)
$46.92

Tie Rod, with Ball End - This Tie Rod with Ball End is for adjustable front axle Cubs. 16 5/8inches overall length. (Part No: 351387R11)
$46.92

Wheels
Front Rim - Cub - 4 x 12 - 5 bolt on 4.5 inch bolt circle, 3 1/8 inch pilot hole. Add $10 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: Cub4x12)
$70.62

Front Rim 3 x 12 - This 3 inch by 12 inch rim is for tractor models Cub, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy. This is 5 bolt with a 3 1/8 inch pilot hole. Bolt holes measure 2 3/4 inch center to center on adjacent holes. Backspacing measures 3 inches. Add $10 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: R2054)
$74.12

Front Wheel Bearing Kit - For tractor models Cub, Lo-Boy. Bearing kit for front wheel tractor, contains (15580) inner cone, (15520) inner cup, (17580) outer cone, (17520) outer cup, (350768R1) felt washer. Complete kit for 1 wheel. (Part No: FW116FS)
$100.12

Tire 4 x 12 - This three rib front tire fits the following tractor models: cub. It measures 4 x 12 and is not designed for tubeless applications. (Part No: WHS057)
$50.37

Wheel Bearing Kit - For tractor models Cub, Cub Lo-Boy. Contains: BEARING 15580B, BEARING 15520B, BEARING 17580, BEARING 17520B, SEAL 350768R1, WEAR SEAL 351076R1. This is a wheel bearing kit for one wheel. NOTE: Does NOT come with seal number 350769R1. Available at an additional cost. (Part No: WBKIH11)
$57.33

Wheel Rim 7X24 - This 4 bolt rim is 7 wide, 24 diameter with four mounting clamps. This uses 4 1/2 inch mounting bolts. The mounting holes measure 14 1/2 inches center to center. For single rear wheels with 7-24, 8.3/8-24 or 9.5/9- 24 tires. Tractors: Cub, Cub Lo-Boy. For Cub, Cub Lo-Boy. Additional $15.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 114717C1)
$120.92



Accessories / Supplies
Auxiliary Heater, Universal - This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Brake Rivet Tool - Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$33.95

Brake Rivet Tool, Large - Larger version of our Brake rivet tool. 3-3/8 inch deep throat x 2-1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$95.23

Cooling System
Magnetic Block Heater - Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250°F (121°C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$60.71

Radiator Drain Tap - This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: 103647, 144569, 1960767C1, 217-92, 31-157, 31-159, 31419, 371602A1, 4029/09055, 534184R1, 539787R1, 614201R1, 9671406, 47050674, 86625234, H434809. (Part No: C9NN8115A)
$3.49

Zip Leak - Industrial Radiator Stop Leak - A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.49

Decals and Emblems
Decal, Fear This IH - Black and red, 12-1/2 x 3-3/4. For all Models. (Part No: S.67826)
$14.10

Decal, IH Block - "IH" logo, 11 inches. (Part No: R4682)
$22.79

Decal, IH Block - "IH", 3 inch x 3 1/4 inch Block. (Part No: R4681)
$8.15

Decal, IH Block - "IH" logo, 1 3/4 inch. (Part No: R4680)
$6.51

Decal, IH Block - "IH", 1 1/4 inch Logo . (Part No: R4679)
$4.89

Decal, IH Block - "IH" logo, 7 inches printed on vinyl. (Part No: R5171)
$27.83

Decal, IH Block - "IH" logo, 8 inches printed on vinyl. (Part No: R5172)
$25.52

Decal, IH Block - "IH" logo, 10 inches. (Part No: R5173)
$29.33

Decal, IH Block - "IH" logo no background, 1 inch printed on vinyl. (Part No: R5174)
$3.26

Decal, IH Block - "IH" logo no background, 1-5/8 inches printed on vinyl. (Part No: R5175)
$4.89

Decal, IH Block - "IH" logo no background, 2 inches x 2-1/2 inch printed on vinyl. (Part No: R5176)
$6.51

Decal, IH Block - "IH" logo no background, 3 inch x 3-1/2 inch printed on vinyl. (Part No: R5177)
$16.28

Decal, IH Block - "IH" logo no background, 4-1/2 inch x 4-3/4 inch printed on vinyl. (Part No: R5178)
$9.77

Decal, IH Block - "IH" logo no background, 5-1/2" x 6" printed on vinyl. (Part No: R5179)
$9.77

Decal, IH Block - "IH" logo no background, 6-1/2 inch x 7 inch. (Part No: R5180)
$16.28

Decal, IH Block - "IH" logo no background, 7-1/2 inch x 8 inch. (Part No: R5181)
$19.53

Decal, IH Block - "IH" logo on silver background, 2 inch x 2-1/4 inch. (Part No: R5182)
$6.51

Decal, IH Block - "IH" logo no background, 10 inch x 11 inch. (Part No: R5183)
$21.65

International Decal - 8-1/2 inch long, white with black outline. (Part No: R0679)
$9.77

International Decal - 23 inches long, black block letters. (Part No: R0680)
$16.28

International Decal - 23 inches long, white with black outline. (Part No: R0681)
$19.53

International Decal - 26 inches long, black block letters. (Part No: R0682)
$19.53

International Decal - 26 inches long, white with black outline. (Part No: R0683)
$21.65

International Decal - 29 inches long, black block letters. (Part No: R0684)
$21.65

International Decal - 29 inches long, white with black outline. (Part No: R0685)
$24.74

Drive Train
Lucas Hub Oil (quart) - Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.13

Electrical System
Alternator - Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651. NOTE

Alternator Base Bracket Kit - Universal - Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$34.20

Alternator Top Adjusting Bracket, Universal - This Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$11.93

Alternator, 12 Volt - Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$68.93

Battery Hold Down - Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.81

Battery Hold Down - Universal Battery Hold down. Verify your battery measurements. This will fit a 9 3/16 inches long and 7 3/16 inch wide battery. (Part No: 1111-0147)
$13.43

Battery Hold Down Bolts - Pair - These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$8.62

Battery Thermal Wrap - 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

Battery Thermal Wrap - 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

Battery Thermal Wrap - 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Coil - This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$28.38

Coil Bracket - Universal Coil Bracket (Part No: R1940)
$3.50

Coil, High Performance (Black), 12 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$45.15

Coil, High Performance (Black), 12 Volt, Oil Filled - Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$35.82

Coil, High Performance (Black), 6 Volt, Epoxy Filled - Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$44.33

Coil, High Performance (Black), 6 Volt, Oil Filled - Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$35.18

Coil, High Performance (Chrome), 12 Volt, Oil Filled - 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$40.25

Coil, High Performance (Chrome), 6 Volt, Oil Filled - 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40001)
$39.53

Coil, Ultra High Performance (Black), Oil Filled - Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$39.44

Coil, Ultra High Performance (Chrome), Oil Filled - Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 0.6 Ohms of resistance. For use with Ignitor II Electronic Ignition Module. (Part No: 45001)
$43.58

Coil-Universal 12V - Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt without resistor. Replaces: 396547R91 (Part No: D5TE12029AB)
$7.13

Distributor Cap, WICO - For All Models with WICO distributor having clip type cap with 3 3/8 inside diameter seat. (Part No: X30042)
$44.75

Magneto Winding J4 - For tractors using a J-4 Magneto. (Part No: 352355R91)
$68.92

Magneto, Wico XH & XHD, Service & Parts Manual - Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

Spark Plug - Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$2.73

Spark Plug - Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$2.73

Spark Plug - Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.63

Spark Plug Wire Set, 4 Cylinder, Univeral - Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length (Part No: S2097)
$12.75

Spark Plug Wire Set, 4 Cylinder, Universal - For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. (Part No: S.66442)
$12.59

Spark Plug Wire Set, Universal - 6 Cyl. - Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00

Spark Plug Wire Set, Universal, 4 Cyl. - Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$11.24

Starter - Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it! (Part No: STARTER)
$0.00

Starter Solenoid - This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. Replaces: 1114200, 1114207, 1114216, 1114225, 1114235, 1114545, 1114548, 1118820, 1996067, D928, DR1467, DR1485. May come in a silver metal casing versus black plastic. (Part No: DR1467)
$7.13

Starter, Generator Tag, 12 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.31

Starter, Generator, Distributor Tag, 6 Volt, Blank - Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.31

Stripper and Crimping Tool - Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$21.20

Voltage Regulator, 12 Volt - 4-terminal flat mount. The Three Post side of this regulator may be parallel or slightly splayed. Fits most 12V tractors and combines prior to 1957. (Part No: 182548M92)
$16.88

Engine Gaskets
Silicone Black RTV - Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.43

Silicone Blue RTV - Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75° F to +500° F, 3.35 oz. tube. (Part No: PRM77BR)
$6.29

Silicone Copper RTV - Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Rebuild Kits
Lucas Assembly Lube - Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It is useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$4.65

Engine Parts
Valve Overhaul Kits - Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor). NOTE

Engine Pistons and Sleeves
Piston Groove Cleaner - For pistons up to 5 1/2 inches. Cleans grooves of 5/64, 3/32, 1/8, 5/32 and 3/16. (Part No: B1SB9055)
$31.79

Engine Rings
Piston Ring Sets - Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32"). NOTE

Exhaust System
Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$120.24

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a good Chrome Stack For IH Applications With 400 Series Diesel Engines & 3 3/4" OD Manifold Outlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$144.46

Chrome Exhaust Stack - This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$131.49

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Chrome Exhaust Stack - This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$84.28

Muffler Clamp, 1-1/2 - New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.75

Muffler Clamp, 1-1/4 - New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$2.50

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$2.50

Muffler Clamp, 1-1/8 - New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$2.50

Muffler Clamp, 1-3/4 - New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.75

Muffler Clamp, 1-3/8 - New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Muffler Clamp, 1-5/8 - New Clamp for 1-5/8 inch outside diameter muffler inlet. (Part No: MC158)
$2.75

Muffler Clamp, 1-7/8 - New Clamp for 1-7/8 inch outside diameter muffler inlet. (Part No: MC178)
$2.75

Muffler Clamp, 2 - New Clamp for 2 inch outside diameter muffler inlet. (Part No: MC200)
$2.75

Muffler Clamp, 2-1/2 - New Clamp for 2-1/2 inch outside diameter muffler inlet. (Part No: MC212)
$3.15

Muffler Clamp, 2-1/4 - New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.15

Muffler Clamp, 2-3/4 - New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Muffler Clamp, 2-3/8 - New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$4.50

Muffler Clamp, 3 - New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Muffler Clamp, 3-1/2 - New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Muffler Clamp, 3-1/4 - New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Muffler Clamp, 4 - New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Muffler Clamp, 4-1/2 - New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Muffler Clamp, 5 - New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Rain Cap - This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$5.24

Rain Cap - This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.33

Rain Cap - This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$6.51

Rain Cap - This rain cap is for a 2.25 inch pipe. (Part No: R1801)
$7.23

Rain Cap - This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$8.64

Rain Cap - This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.61

Rain Cap - This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$5.99

Rain Cap - This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$11.99

Rain Cap - This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Stainless Steel Clamp, 2 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90869A)
$5.22

Stainless Steel Clamp, 2.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Stainless Steel Clamp, 2.75 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Stainless Steel Clamp, 3 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90873A)
$5.57

Stainless Steel Clamp, 3.5 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Stainless Steel Clamp, 4 Inch - This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.09

Fuel System / Air Intake
Air Cleaner Filler - Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$9.90

Choke Cable - Universal choke cable 72 inch long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Fuel Filter, In-Line, 1/4 inch - Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$5.19

Fuel Filter, In-Line, 3/8 inch - Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.04

Fuel Filter, In-Line, 5/16 inch - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

Fuel Filter, In-Line, 5/16 inch, Clear - Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$4.43

Fuel Tank Liner - For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$24.20

Fuel Tank Liner Kit - Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$50.78

Fuel Tank Screen - This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.00

Fuel Tank Webbing, 3 Ft - Black woven nylon type material, .042 inches thick, 3 foot section. (Part No: FTW494)
$4.13

Lucas Fuel Treatment (quart) - Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.80

Main Fuel Valve - This main fuel valve replaces the original fuel solenoid for International carburetors. The original fuel solenoids are very unreliable and can easily be replaced with this manual valve. This assembly contains: the valve, graphite packing, and packing nut. This will not fit Marvel-Schebler and some Zenith Carburetors. If you need one for a Marvel-Schebler, or Zenith please call 800-853-2651 to check availability and pricing. (Part No: 47404DASSY)
$22.50

Sediment Bowl Gasket, 2-1/8 inch - For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

Stop Cable - This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.79

Gaskets
Gasket Material, Cork Rubber - 3/32 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR332)
$10.84

Gasket Material, Cork Rubber - 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$13.81

Gasket Material, Exhaust Manifold - 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$20.03

Gasket Paper, .0160 - .0160 inch x 18 inches x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

Gasket Paper, .0275 - .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$22.72

Temperature Gauge, Universal - Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Gauges
Ammeter Gauge - 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$2.99

Amp Gauge - This amp gauge comes with the "IH" logo printed on the face. It has a black face, chrome bezel, and reads 60-0-60. (Part No: IHS1837)
$27.90

Hourmeter - DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Hourmeter, Analog - 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oil Gauge - For IHC and Farmall tractors 1947 and and up. Oil Pressure Gauge with color band - Includes mounting bracket. Has IH logo on face. (Part No: 41934DB)
$64.35

Oil Gauge Copper Line Kit - Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oil Gauge Valve - Oil level indicator (petcock). For all tractors with a 3/8" thread. Oil Gauge Valve for oil pan. (Part No: 1998TAOE)
$14.33

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.27

Oil Line Adapter - Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.72

Oil Pressure Gauge - Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

Temperature Gauge - Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.78

Temperature Gauge, Universal - For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.20

Hitch / Drawbar
Center tube, Stablizer - Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$13.66

Conversion Tong - Two Point Conversion Tong straight left hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1447)
$177.50

Conversion Tong - Two Point Conversion Tong straight right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 28 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH1448)
$177.50

Conversion Tong - Two Point Conversion Tong bent type, and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14416)
$187.57

Conversion Tong - Two Point Conversion Tong bent type, right hand Tong with combination Cat. I and Cat. II Ball. For converting IHC Two Point Fast Hitch to Three Point. About 32 inches overall length. Add $5.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FH14417)
$187.57

HAIR PIN ASSORTMENT - 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$5.99

HITCH BALL 10000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-1/4 inch STUD THREAD, 2-1/2 inch STUD LENGTH, 10, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

HITCH BALL 15000LB 2-5/16 - 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

HITCH BALL 2000LB - 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$9.23

HITCH BALL 3500LB - Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.48

HITCH BALL 5000LB - Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

HITCH BALL 5000LB 2-5/16 - Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Hair Pin Cotter Assortment - Hair Clips sizes from 1/16 x 1 3/8 to 3/16 x 3 1/4. Total of 141 pieces in 6 sizes. (Part No: B1SB16)
$29.19

LINCH PIN, 10 Pack - Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$4.28

Linch Pins, Pack of 10 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Linch Pins, Pack of 10 - 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$2.10

Linch Pins, Pack of 10 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$4.17

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. Additional $60 shipping due to the weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$178.02

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$22.14

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$28.43

Universal Stabilizer Chain Kit - Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$52.87

Hydraulic System
Hydraulic Parts, Universal - Universal hydraulic parts such as hoses, filters, pressure gauges etc.. can be found in the Accessories and Universal parts section. NOTE

Implements
Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Bolt - Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Axle Nuts (5) - 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Bearing Cup - This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Bearing cone (L44643) - For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Blade Bolt Kit - Price is for each bolt with hardware. Must be ordered in quantities of 2. For rotary cutter blade used on rotary cutters. Please verify dimensions before ordering: A = 1 1/8-12 inch, B = 3 1/2 inch, C = 1 3/8 inch, D = 1 inch, E = 9/16 inch, F = 1/2 inch, G = 2 1/2 inch, H = 1.492 inch (for 1 1/2 inch blade hole), I = 1.12 inches. (Part No: 63607)
$12.04

Bush Hog Axle Spacer Bushing - Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

Caster Assembly - Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inches diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Caster Assembly, Old Style - Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Graphite Lubricant - Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$21.25

HUB with BRG CUPS - 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$44.80

Hub Assembly - Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 31.5 Inches - Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

Round Bale Tine 38.5 Inches - Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

Round Bale Tine 43 Inches - Fully Hardened. (Part No: 241166)
$97.46

Round Bale Tine 49 Inches - Fully Hardened. (Part No: 241162)
$100.37

Round Bale Tine 55 Inches - Fully Hardened. (Part No: 241163)
$109.42

Seal, Caster - Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Tail Wheel Assembly - 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Talc Powder Lubricant - Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Halogen Work Light-Double Bulb - 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Headlight Assembly, Teardrop - 6 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 6-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB)
$44.34

Headlight Assembly, Teardrop- 12 Volt - Original Style, TEAR-DROP shaped back. PAINTED RED. 12-VOLTS. Approx 5" diameter. Price is for one complete headlamp assembly. Original replacement for many IH tractors. Verify your configuration (Teardrop vs. Flat-Back) before ordering. (Part No: 45640DB-12V)
$43.05

Light Bulb, Sealed Beam, 6 Volt - 4-1/2 inch number 4511. (Part No: 373661R91)
$11.99

Magnetic worklight Universal Mounting. - Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Portable Halogen Work Lamp - 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. (Part No: S.61357)
$10.88

Sealed Beam Light - 6 Volt (Part No: R2712)
$40.95

Sealed Beam Light - 12 Volt (Part No: R2713)
$40.95

Switch, Light, with Knob - Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$14.67

Work Lamp, HID, Flood Light - Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Work Light 12V With Switch - Work light, 12 volt, 3000 candle power, trapezoidal light pattern. On-off switch on back of light housing. Uses 4-1/2" diameter sealed beam lamp, L4411. (Part No: L408-12V)
$41.40

Worklight 12 Volt - Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792)
$29.92

Worklight 12 Volt Black - 12 Volt worklight with handle, on/off switch, swivels and rotates. Mounting holes measure 4 3/8 inch center to center. (Part No: S.67771)
$31.65

Miscellaneous
Cab Foam Kit - With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236)
$346.95

Canopy - 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

Canopy Mounting Kit, 2 Post - Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$75.80

Canopy Mounting Kit, 4 Post - Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

Canopy Mounting Kit, Hoop Type - Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Canopy, Small Tractors - 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Deluxe Canopy, 3 Bow - Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53