International Harvester / Farmall 454 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Belts
Fan Belt - For International / Farmall tractor models 454 (gas), 464 (gas), Replaces International OEM number 532030R2, Length: 52.07", Width: .453", Thickness: .315", Color: Black, Material: Polyester Cord, (Item #: 182224) $7.30

Brakes
Brake Band with Lining - Used on Hand Brakes on International and CaseIH models 385, 454, 474, 475, 484, 485, 574, 584, 585, 674, 684, 784, 833, 885, this assembly replaces 401992R1, 401992R2, 401992R3, 1971050C1 (Item #: 105422) $139.00
Brake Disc - 10.190 inch outside diameter, 15 internal splines. For tractor models Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84. Replaces 1027256C1, 114621C1, 114622C2, 399734R1 (Item #: 105452, Ref: 114622C2) $94.00
Brake Master Cylinder Repair Kit - For International / Farmall tractor models Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 475, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2500, Replaces International OEM number 3125824R1, (Item #: 164006) $21.00
Brake Master Cylinder, Used - For International tractor models Hydro 84, 248, 258, 268, 278, 385, 454, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885 (s/n 003083-earlier), 2400A, Replaces International OEM number 527542R92, For a new version of this item use Item #: 116908, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 416908) $57.01
Brake O-Ring Kit - For tractor models 385, 395, 454, 464, 484, 485, 495, 574, 584, 585, 595, 674, 684, 685, 695, 784, 884, 885, 895. Set of 6 O-Rings, 2 for brake piston, 4 for differential bearing carriers. (Item #: 105424, Ref: 539535R91) $35.50
Brake Plate - The measurements on the Brake Plate are ID: 8 1/8 inches (206mm) with 3 tabs, OD: 10 1/4 inches (259mm). This part replaces 399736R3, 984439C1. Used on International models 2400, 2400A, 248, 2500, 2500A, 268, 3220, 3230, 380B, 385, 395, 4210, 4230, 4240, 454, 464, 474, 484, 485, 495, 574, 584, 595, 674, 684, 685, 695, 784, 884, 885, 895, 995, C100, C50, C60, C70, C80, C90, CX100, CX50, CX60, CX70, CX80, CX90, Hydro 84 (Item #: 105456, Ref: 399736R3) $84.77
Master Brake Cylinder - Assembly for Hydro 84, 385, 454, 464, 484, 574, 674, 784, 884, 2400A, 2500A. (Item #: 116908, Ref: 527542R92) $105.00

Clutch
No Picture Clutch Disc - For tractor models 454, 464, 574, 674 with gas engine 11 inch diameter, 1-1/8 inch hub, 10 spline, 3 Metallic Pads. (Item #: 401479R93) $149.85
Clutch Kit - This new single clutch kit contains a 11 inch, 3 spring, 10 spline 1 5/8 inch hub pressure plate assembly (1500655C92), a 11 inch, 6 pad, 10 spline, 1 1/8 inch hub clutch disc (293248A1), release bearing (405625R91), pilot bearing (537290R91), and pilot tool. Tractors: 384, 454, 464, 484, 485, 574, 584, 585, 674, 684, 784, 884, 2400A, 2400B, 2500A, 2500B, 3500A.70716NC (Item #: 118400, Ref: S.61265) $245.00
No Picture Clutch Pressure Plate Assembly - New pressure plate assembly, 11 inch, 10 spline, 1-5/8 inch hub. For tractor models 454, 464, 484, 574, 584, 674, 684, 784, 884. (Item #: 150356, Ref: 70716C1) $145.00
Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $54.00
Clutch Release Fork - This Clutch Release Fork is used with 1970934C1 Clutch Bearing Carrier when used with a 12 inch clutch and 1971045C1 Clutch Bearing Carrier when used with an 11 inch clutch. Replaces 398342R2. (Item #: 111733, Ref: 398342R2) $78.00

Cooling System
Fan, 6 Blade - 17.00 inches in diameter, 1.25 inch pilot hole, 1.375 inch center to center on bolt holes. For tractor models (2504, 504 gas serial number 4242 and up), (454 gas with syncromesh transmission), (484 diesel with 9-11/16 inch crankshaft pulley). (Item #: 124627, Ref: 86897R91) $108.00
Radiator Cap - This 10 pound radiator cap with cover is used on multiple tractors. It replaces original part numbers 527425R1, 532672R91, 532029R1, 532029R2, 3118639R1, 1500626C91. (Item #: 114950, Ref: 1500626C92) $15.60
Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.70
Radiator Hose, Lower - For tractor models 454, 464 both with gas engines. (Item #: 159461, Ref: 402188R1) $14.30
Radiator Hose, Lower - Radiator hose, lower, for diesel tractors. For tractor models 454, 464, 484. (Item #: 117703, Ref: 402189R1) $12.90
Radiator Hose Upper - Radiator hose, upper, for gas tractors. For 454, 464 (Item #: 117700, Ref: 402190R1) $16.40
Radiator Hose, Upper - Radiator hose, upper, for diesel tractors. To serial number 8169. For 454, 464, 484. Has approximately 1-7/16 inch inside diameter at one end and 1-13/16 inch inside diameter at the other end. (Item #: 124701, Ref: 402191R1) $11.70
Thermostat, 180 Degree - For Diesel models 1046, 1055, 1056, 1255, 1455, 353, 385, 423, 454, 474, 484, 485, 523, 574, 584, 585, 644, 674, 684, 685, 724, 743, 745S, 784, 785, 844, 844S, 845, 856, 884, 885, 946, 955, 956. All with one of the following engines: D358, DT358, DT402, D155, D179, D206, DT239, D239, D246, D268, D310. (Item #: 116901, Ref: 3059676R91) $14.80
Water Pump - Does not come with rubber mounting seal or back plate. For tractor models 2544, 3400A, 3414, 3500A, 3514, 4500A, 4500B, 454, 464, 544, 574, 674. All with either C157, C175 or C200 engines. (Item #: 110070, Ref: 400677R92) $112.00
Water Pump - For tractor models 380B, 454, 464, 484, 584, 574, 674, 684, 2500A, Hydro 84, 784. Water Pump for a diesel comes with hub installed and a gasket. Replaces 3136053R92-R, 3136053R93, 3132739R94, 3136053N. Casting number 3132677R1, 3132677R2. (Item #: 100792, Ref: 3136053R92) $56.00
Water Pump Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2500A, 2500B, 2544, 8000 (LIFT TRUCK), Replaces International OEM number 397968R2, (Item #: 154674) $2.00
Water Pump Hose - This New water pump hose with an inside diameter of 1.5 inch on the smaller side and 1.875 inch on the larger side. This water pump hose fits the Case-IH Tractor 454 (with D179 engine), 574 (with D239 engine), and 674 (with D239 engine). Replaces B513977, VPE4123) (Item #: 167574, Ref: 3132144R1) $7.60
No Picture Water Pump - New - With Hub For 454, 464, 484, 574, 584, 674, 684, 784, 2500A, Hydro 84 with D179, D206, D239, or D246 Engine s (Item #: 100792, Ref: WP1729) $56.00
Water Pump, Remanufactured, 400677R92, 397965R2 - For International / Farmall tractor models 454, 464, 544, 574, 674, 2544, 3514, Compatible with International Construction and industrial models 260, 2400A, 2400B, 2500A, 3400A, 3500A, 4500, Replaces International OEM number 400677R92, 397965, Replaces International Casting number 397965R2, Engine: C157, C175, C200, Includes pump to backplate gasket, Includes backplate to block gasket, Includes bypass seal, With hub, Without backplate, (Item #: 205223) $117.01

Decals and Emblems
Decal Set - For 454. Hood Set Decal Set. (Item #: 183114, Ref: R3623) $65.00
Decal Set, Chassis - For model 674 and 454 (Item #: 183157, Ref: R5163) $84.00
IH Decal, 1-5/8", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1 5/8", no background, (Item #: 101024) $2.70
IH Decal, 1", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1", no background, (Item #: 101023) $1.80
IH Decal, 3" x 3-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 3" x 3-1/2", No background, (Item #: 101025) $10.50
IH Decal, 4-1/2" x 5" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 4-1/2" x 5", Mylar decal, (Item #: 101095) $5.30
International 454 Hoods Decal Set, Vinyl - For International / Farmall tractor model 454, (Item #: 100977) $181.00
International Decal, 17", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 17" long, Black, Mylar decal, (Item #: 101105) $5.30
International Decal, 8-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 8 1/2" long, Black, Mylar decal, (Item #: 101104) $3.50
International Decal Set,10" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 10", (Item #: 101022) $27.90
International Decal Set, 1 1/4" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-1/4", (Item #: 101018) $2.70
International Decal Set, 1 3/4"x 1 5/8" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-3/4", (Item #: 101019) $3.50
No Picture International Decal Set, 6 1/2"x 7" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo 7", Vinyl Cut, Shaded Outline, (Item #: 101020) $15.70
No Picture International Decal Set, 7 1/4"x 8" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 8", (Item #: 101021) $20.90
International Harvester Decal, 2-3/4" x 3" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, (Item #: 101093) $3.50
International Harvester Decal, 2" x 2-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/2", No background, Mylar decal, (Item #: 101097) $3.50
International Harvester Decal, 2" x 2-1/4", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/4", Mylar decal, (Item #: 101092) $3.50
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", Mylar decal, (Item #: 101096) $5.30
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", No background, Mylar decal, (Item #: 101098) $5.30
International Harvester Decal, 5" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 5" diameter, Shaded outline, Mylar decal, (Item #: 101099) $5.30
International Harvester Decal, 6" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 6" diameter, Shaded outline, Mylar decal, (Item #: 101100) $7.00
International Harvester Decal, 7-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 7 1/2" diameter, Shaded outline, Mylar decal, (Item #: 101101) $8.80
International Harvester Decal, 9", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 9" diameter, Shaded outline, Mylar decal, (Item #: 101102) $10.50
International Hood Decal, 23-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, Size: 23-1/2", Black lettering, (Item #: 101031) $14.00
McCormick International Decal, 10" Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 10" long, Black and white, Vinyl decal, (Item #: 101103) $8.80
McCormick International Decal, Hood, White/Black, 7-1/4", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 7-1/4" black and white, Vinyl decal, (Item #: 101026) $7.00

Drive Train
Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.80
IPTO Drive Shaft - When replacing earlier Independent PTO shafts 398235R1 or 66347C3, you must also replace 71229C1 carrier and 108982C1 seal (not available through Yesterday's Tractors. This shaft has 10 splines and 21 teeth. Used on International models: 454, 464, 484, 574, 584, 674, 684, 784, 884, 2400A (Item #: 124724, Ref: 71230C2) $136.00

Electrical System
Alternator - 12 volt, 55 amp. For tractor models (856D 1967 to 1971 with 407 diesel), (1026D, Hydro 1026D 1970 to 1971 with 407 diesel), (1206D 1965 to 1967 with 361 diesel), (1256D 1967 to 1969 with 407 diesel), (1456D 1969 to 1971 with 407 diesel), (444 1967 to 1971 with 153 gas), (454 1970 to 1971 with 157 gas), (454D 1970 to 1973 with 179 diesel), (544 1968 to 1973 with 200 gas), (544D 1968 to 1973 with 239 diesel), (574 1970-72 with 200 gas), (574D 1970-72 with 239 diesel), (606 1965 to 1967 with 221 gas/LPG), (606D 1965 to 1967 with 236 diesel), (2444 1968 to 1970 with 153 gas), (2444D 1968 to 1970 with 154 diesel), (2544 1969 to 1970 with 200 gas), (2544D 1969 to 1970 with 239 diesel), (2656 1971 to 1972 with 263 gas/LPG), (2656D 1971 to 1972 with 268 diesel), (2756 1967 to 1971 with 291 gas/ 310 diesel), (2806 1965 to 1967 with 301 gas), (2806D 1965 to 1967 with 361 diesel), (2826 1970 to 1971 with 301 gas). Replaces 1100805, 1100883, 1100791, 1100778, 1100720, 1100771. (Item #: 113606, Ref: ADR0231) $123.00
Alternator - 12 volt, 63 amp. For tractor models (453 1972 to 1974 with 301 gas), (453D 1973 to 1974 with 360 diesel), (615 1972 to 1974 with 263 gas), (715 1972 to 1974 with 301 gas), (95 1974 to 1978 with 301 gas), (416, 422 1973 to 1978 with 263 gas/LPG or 282 diesel), (666 1972 to 1976 with 291 gas), (Hydro 70 1973 to 1976 with 291 gas), (454 1972 to 1973 with 157 gas), (464 1973 to 1974 with 175 gas), (574 1973 to 1974 with 200 gas), (766 1971 to 1976 with 291 gas), (2500A, 2500B 1972 to 1974 with 200 gas). Replaces 1100589, 1100593. (Item #: 113330, Ref: ADR0151) $127.00
Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models Super W6TA, Super W9, Super WD6, Super WD6-TA, Super WD9, Super WDR9, W4, W400, W450, W6, W9, WD6, WD9, WDR9, WR9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 504, 600, 650, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 3514. R6332. MHSK1 (Item #: 124839, Ref: 107304C91) $113.00
Distributor Dust Cap - Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Item #: 125927, Ref: 1960325) $13.60
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.60
Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $161.00
Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $159.00
Fuse Holder Kit - For Cub, Cub Lo-Boy, Hydro 70, Hydro 86, Hydro 100, 140, 404, 424, 444, 454, 464, 504, 574, 606, 656, 666, 674, 686, 706, 756, 766, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2400A, 2404, 2424, 2444, 4500A, 2504, 2544, 2606, 2656, 2706, 2756, 2826, 2856, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 1500, 21026, 21206, 21256, 21456. Replacement Fuse Holder Kit. Mounts on 5/8 inch diameter hole in instrument panel. 2 spade connectors. (Item #: 112273, Ref: 376852R91) $10.40
Fuse Housing - Reproduction of original Fuse Housing. Comes as pictured. For tractor models (Super A, Super AV, A1 all with magneto), C, Super C, 200, (H late with regulator under tank), Super H, HV, (M with regulator on post), (Super M 1953-1954), (Super M diesel), Super MTA, W4, OS4, O4, 100, 130, 400, 450. Replaces: 365515R91, 376852R91, 354232R91 (Item #: 112273, Ref: 376852R91) $10.40
Solenoid - Starter solenoid assembly, services Delco starters: 1113034, 1113198, 1113685, 1113053, 1113201, 1113690, 1113176, 1113203, 1113197, 1113647. Hydro 70, 84, 86~ 400, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 1456D, 1466, 1468, 1566, 2400A, 25 For 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 21206, 21256, 21456, 2400A, 2500A, 2544, 2656, 2706, 2756, 2826, 2856, 400, 4166, 450, 454, 544, 560, 574, 656, 660, 664, 666, 684, 706, 756, 766, 826, 84, 856, 86, 966, HYDRO 70, HYDRO 84, HYDRO 86. Replaces 585618C91, 65479C2 (Item #: 105672, Ref: 1115510) $31.00
Starter, Delco - Has 11 teeth, clock wise rotation, 12 volt. Fits 454, 464, 574, 674, 2400A, 2500A. Add $45 core charge. Replaces 104191A1R, 1108394, 403299R91, A482112Z (Item #: 203161, Ref: 1108394) $350.46
No Picture Starter - Delco Style DD (4939) - For International / Farmall tractor models 454, 464, 574, 674, 2500A, 2500B, Compatible with International Construction and industrial models 2400A, 2400B, 2500A, 2500B, 3400A, 3500A, Replaces International OEM number 403299R91, A482112Z, Replaces Delco Remy manufacturer number 1108394, Replaces manufacturer number 4939, 140-707, 91-01-4201, Delco Style Direct Drive, Gas models only with Delco starters, Voltage: 12, Rotation: Clockwise, Teeth: 11, For gas applications, For a Remanufactured version of this sku use Item #: 203161, (Item #: 160368) $223.00
Starter, Diesel - For 179/239 Diesel engines. 12 volt, 10 tooth, clockwise rotation. For tractor models (454D 1970 to 1973 with D-179 diesel), (464D 1973 to 1978 with D-179 Diesel), (574D 1970 to 1978 with D-239 diesel), (674D, 674DRC 1978 to 1984 with D-239 diesel), (2500A-D, 2500B-D 1972 to 1974 with D-239 diesel), (715D 1971 to 1974 with D-301 diesel). Replaces 1113690, 1113650. (Item #: 102202, Ref: SDR0076) $310.00
Starter Drive - Starter drive, services Delco starters: 1107867, 1113203, 1113690. Tractors: Hydro 84, 454, 464, 574, 674, 684, 2400A, 2500A. 10 teeth. For 2400A, 2500A, 454, 464, 574, 674, 684, HYDRO 84. YTO 1877355 (Item #: 113469, Ref: 1877355) $29.80
Starter Drive - Has 11 teeth. For 1108155 and 1108394 Delco starter in: 454, 464, 574, 674, 2400A, 2500A. 11 Teeth, 3-13/16 inches long. (Item #: 110777, Ref: 1932897) $32.40
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
Starter Motor - Fits 454, 474, 574, 674, 484, 584, 684, 784, 884, 6858, 485, 485XL, 585, 585XL, 685, 685XL, 785, 785X, 885, 885XL, 985XL, 395, 495, 495XL, 595, 595XL, 695, 695XL, 795, 795XL, 895, 895XL, 995XL, 2310, 3220, 3230, 4210, 4220, 4230, 4240, 84 Hydro. Replaces these starter numbers in the above models: B514002, SLU0013, TS-1212, TS-4030, 1107867, 114568A1, 114568A2, 114568A3, 189330A5, 1998343, 230428A1, 230428A3, 537140R91, 537140R96, SDR0214. (Item #: 104180, Ref: 537140R95) $167.00
Starting Button - Attaches with spade terminals. For tractor models 1026, 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 70, Hydro 86, Hydro 100, Hydro 186, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588. Replaces IHS800. (Item #: 112232, Ref: 397940R93) $7.40
Switch - Ignition switch, 6 prongs, includes 2 keys. For tractors: Hydro 84, 354, 454, 464, 484, 574 to serial number 114908, 584, 674, 684, 784, 884, 2300, 2400, 2500 to serial number 114908. For H, HV, M, MD, MDV, MTA, MV, Super M. (Item #: 111509, Ref: 529800R91) $9.90
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $13.80
Tune-up Kit - Ignition TUNE UP KIT For Cub 1963 and Later with IH Distributor, 140, 340, 454, 504. Includes the Rotor, Point and Condenser (ATK9BIR Kit) Plus Spark plugs of 18mm, 1/2 inch reach, 7/8 inch hex. Verify correct spark plug size and type (Item #: 160863, Ref: IHTK2) $28.40
Tune-up Kit - Kit contains points, condenser, rotor, gap gauge and AL386 spark plugs. VERIFY SPARK PLUG SIZE as this kit comes with AL386 that are 18MM, 1/2 inch reach and 7/8 hex size. For tractor models 454, 464, 544, 574, 674 all with 4 cylinder engines all with a Delco Distributor with a screw type cap. Verify correct spark plug size and type (Item #: 182530, Ref: MF-ITK-40) $26.60
Voltage Regulator, Internal - Alternator regulator, internal, heavy duty, replaces Delco numbers 1116392 and 1116387. Services Delco alternators: 1100578, 1102375, 1100583, 1100585, 1100587, 1100593, 1102920, 1102921, 1103160, 1103171, 1103183, 1103184, 1103971, 1105164, 1105538, 1107178, 1116. For tractors: 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 172582, Ref: 585624C1) $10.20

Engine Bearings
Camshaft Bearing, Front - The Bearing is used on C157 engines in models: 2400A, 2400B, 2405B, 2410B, 454; C175 Engines on models: 2400A, 2400B, 2405B, 2410B, 3400A, 3514, 454, 464; C200 Engines on models: 544, 574, 674. To complete the cam bearing set for these engines, also order CBK-H221 (you will not use this whole set). (Item #: 106668, Ref: 398019R1) $104.00
Camshaft Bearing - Intermediate - For International / Farmall tractor models 454, 544, 574, 674, 2400A, 2400B, Compatible with International Harvester (s) 55, 350, 414, 420, 550, 650, Compatible with International Engine (s) C157, C200, Replaces International OEM number 70261R2, Requires 1 per engine, Sold Individually, (Item #: 106669) $115.00
Camshaft Bearing - Rear - For International / Farmall tractor models 454, 544, 574, 674, 2400A, 2400B, Replaces International OEM number 70262R1, Engine C157, C200, Requires 1 per engine, (Item #: 106670) $69.00
Main Bearings - .010" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106601) $94.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106603, (Item #: 106602) $193.00
Main Bearings - .030" Oversize - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: .030" Oversize, For Standard main bearing use Item #: 106602, (Item #: 106603) $193.00
Main Bearing Set, Standard - For tractor models 395, 454, 464, 484, 495, 3220. (D155 and D179 CID Diesel 3-cylinder engine. (Item #: 106596, Ref: MBK179D) $70.00
Main Bearings - Standard - Set - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2544, 3514, Compatible with International Construction and industrial models 100, 2405B, 2410B, 2500B, 2505B, 2510B, 3400A, 3500A, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Sold in complete set, Bearing Size: Standard, For .010" main bearing use Item #: 106603, (Item #: 106600) $120.00
No Picture Rod Bearing - Single bearing in standard. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Standard journal measures 2.060 inches. Replaces 375723R11, 7375723, and CB-533P. Sold individually. (Item #: 106453) $18.20
No Picture Rod Bearing - Single bearing in .010. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Journal measures 2.050 inches. Replaces 376656R11, 7376656, and CB-533P-010. Sold individually. (Item #: 106454) $23.40
No Picture Rod Bearing - Single bearing in 0.20. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Journal measures 2.040 inches. Replaces 376658R11, 7376658, and CB-533P-020. Sold individually. (Item #: 106455) $23.00
No Picture Rod Bearing - Single bearing in 0.030. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Journal measures 2.030 inches. Replaces 375724R11, 7375724, and CB-533P-030. Sold individually. (Item #: 106456) $7.50
Rod Bearing Standard - This is a single rod bearing for International Engines: D155, D179, D206, D239, D246, D268, D310, D358. Replaces 3055218R1. Order on for each connecting rod. (Item #: 191598, Ref: CRK239D) $7.00

Engine Gaskets
Conversion Gasket Set - For International / Farmall tractor models 454, 460, 544, 574, 606, 674, 2400, 2400A, 2400B, 2500A, 2500B, 2606, 3616, Compatible with International Construction and industrial models 2505B, 3500A, 8000, Compatible with International Engine (s) C157, C175, C200, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 398178R92, Contains all gaskets necessary to complete an overhaul that are not included in the head gasket set, Crankshaft seals included, (Item #: 106724) $155.00
Front Crank Seal - Diesel - Front seal package contains seal and wear ring. For tractor models with diesel engines: 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 162141, Ref: 3228133R93) $60.00
Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.00
Head Gasket Set - For tractor models 2400a, 2400B, 2405B, 2410B, 1412B, 2500A, 2500B, 2510B, 2514B, 3400A, 3500A, 3514, 4500, 454, 464 with C157, C175, or C200 Gas 4 cyl Engine. (Item #: 106685, Ref: HS3535) $95.00
No Picture Head Gasket Set - For 454, 464, 484 with D179 Diesel Engine (Item #: 106686, Ref: HS3745) $54.00
No Picture Lower Gasket Set - For 179 CID 3-cyl diesel engine in: 454, 464, 484. (Item #: 106726, Ref: CS179D) $92.00
No Picture Lower Gasket Set Gas - For tractor models 424, 444, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B all with C157 gas engine and 544, 574, 674 all with C200 gas engine. (Item #: 185102, Ref: CS3535) $146.00
Oil Pan Gasket - OIL PAN GASKET for D155, D179 3 cylinder diesel in models 238, 248, 3210, 3220, 353, 383, 385, 395, 423, 433, 440, 453, 454, 484, 485, 485XL, 495, 495XL, 523, 533, 540, 553, 633, 640. Replaces 3055160R4, 3055160R3, 3055160R5, 3055160R2, 73055160 (Item #: 106702, Ref: 3055160R3) $15.20
Oil Pan Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, Compatible with International Construction and industrial models 2400A, 2400B, 3514, Replaces International OEM number 405858R1, Engine: C-157, C-200 Gas, Oil Pan Gasket Only, (Item #: 106704) $19.80
Rear Crank Seal Diesel - For the following engines: D327-4, TD327-3, DT268 Turbo Diesel, D155 Diesel, D179 CID, D206 CID, D226-B6, D226-3, D226-4, D226-6, D227-4, D227-6, D239 CID, D246 Diesel, D268 Diesel, D310 CID, D325-2, D325-3, D327-2, D327-3, D358 CID, TD226-B6, TD226-4, and TD228-6. Inside diameter 110mm, Outside diameter 130mm, Width 12.7mm. Does not include wear sleeve. Order RP301113 if wear sleeve is need. Replaces 7701021418, 6005605198, 3138701R91, X550174902000, 89965016008 (Item #: 106657, Ref: 3138701R91) $20.10
Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.30
Rear Crank Wear Sleeve - This Rear Crankshaft Seal is used for 110mm rear crankshafts on: D155 Diesel Engine, D179 Diesel Engine, D206 Diesel Engine, D239 Diesel Engine, D246 Diesel Engine, DT268 Diesel Engine, D310 Diesel Engine, D358 Diesel Engine. Used with 3138701R91 Seal (not included). (Item #: 106658, Ref: RP301113) $153.00
No Picture Upper Gasket Set - D155 and D179 CID. 3 Cyl Diesel. Includes head gasket. For tractor models 454, 464, 484. (Item #: 106686, Ref: HS179D) $54.00
Valve Cover Gasket - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 3514, Compatible with International Engine (s) C157 (gas), Replaces International OEM number 398068R3, 398068R1, 398068R2, 398068R4, Replaces manufacturer number 7398068, (Item #: 158261) $17.30

Engine Rebuild Kits
No Picture Basic Engine Overhaul Kit, Less Bearings - For tractor models 454, 464, 484. (BD179 CID Diesel 3-cylinder engine. Cupped head piston). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130525, Ref: BEKH179D-LCB) $580.00
No Picture Basic In-Frame Engine Kit - For tractor models 454, 464, 484. (BD179 CID Diesel 3-cylinder engine. Cupped head piston.) Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 186370, Ref: BIFH179D) $515.00
No Picture Engine Overhaul Kit, Less Bearings - For tractor models 454, 464, 484. (BD179 CID Diesel 3-cylinder engine. Cupped head piston.) Kit Contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. IMPORTANT: Specify the part numbers on your old intake and exhaust valves to ensure that correct replacements are sent. (Item #: EOK179D-LCB) $752.98
Engine Rebuild Kit - Less Bearings, C175 - For International / Farmall tractor models 454 (Hydrostatic), 464, 2400A (Hydrostatic), 2400B (Hydrostatic), 3514, Compatible with International Construction and industrial models 100 (early), Compatible with International Engine (s) C175 (gas, sleeveless), Compatible with International Hay Cutting (s) 375, Bore: 3.5625", Stroke: 4.390", Kit includes: Pistons, Piston Ring Set and Gasket set with Crank Seals, Kit does not include piston pin bushings, connecting rod or main bearings, For piston pin bushing use Item #: 106603, Additional Handling and Oversize Fees Apply To This Item, (Item #: 130599) $488.00
No Picture Valve Overhaul Kit - Fits 454, 464, 484, (3 cylinder Diesel D179 CID). Kit includes valves, valve springs, valve keys, valve guides. (Item #: VOKH179) $259.09
No Picture Valve Train Kit - Contains Intake and Exhaust valves, guides, springs and locks. For tractor models 454, 2400A, 2400B, 2405B, 2410B, 2412B. (Item #: 120313, Ref: VTKIH454) $196.00

Engine Parts
Connecting Rod, Reconditioned - The Reconditioned Connecting Rod is used in 454, 464, 574, 674, 484, 684, 784, 884, 485, 585, 685, 785, 885, 495, 595, 695, 895, 2400, 2500, 3400, 3500, 3600, 250A, 260A tractors with D-179, D-239, D-246 Engines. Replaces 1967032C1 and 3055030R24. There is a core charge of $25, when you return your old part, we'll refund the core. (Item #: 210200, Ref: 3055030R24) $109.01
Connecting Rod, Remanufactured, 375595R1 - For International / Farmall tractor models 404, 424, 444, 454, 504, 2400A, 2400B, 2404, 2424, 2444, 2504 (& 4500B tractors), Replaces International Casting number 375595R1, Casting number 375595R1, (Item #: 203742) $279.50
Connecting Rod, Used - For International tractor models Hydro 70, Hydro 86, 454, 460, 464, 544, 560, 606, 656, 660, 666, 674, 686, 706, 756, 806, 856, 2400A, 2400B, 2500, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Compatible with International Combine(s) 50, 205, 303, 315, 403, 715, Compatible with International Harvester(s) 55, 350, 414, 420, 550, 616, 622, 650, Compatible with International Engine(s) C157, C175, C200, C221, C263 (C282), C291, C301, Replaces International OEM nos 367406R21, 367406R11, 367406R12, LP and Gas Engines Only, Pin Diameter: .875", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498381) $25.01
Crankshaft Gear - This Crankshaft Gear has 33 teeth. It is used on D155, D179, D206, D239, D246 and D268 Engines. Replaces original part number 3055028R1. (Item #: 150037, Ref: 3055028R1) $152.00
No Picture Crankshaft, Remanufactured, 405959R - For International / Farmall tractor model 454, Compatible with International Engine (s) C157, Replaces Casting number 405959R, 405859R, 405863R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200240) $620.01
Crankshaft Timing Gear - For tractor models (454 with C-157), (350, 454, 464 with C-175), (504, 2504 with D-188), (544, 574, 674 with C-200), (460, 606, 2606 with C-221), (460, 606, 2606 with D-236), (560, 656, 660, 706, 2706 with C-263), (560, 656, 660, 706, 2706 with D-282), (Hydro 70, Hydro 86, 666, 686, 706, 756, 766, 2706 with C-291), (806, 826, 856 with C-301). Replaces: 367272R1 (Item #: 121570, Ref: 367272R1) $214.30
No Picture Cylinder Head, Remanufactured, 3055048R - For International / Farmall tractor models 385, 454, 464, 484, 2400, Compatible with International Construction and industrial models 3400, Replaces International Casting number 3055048R, Engine 179, Cylinders 3, Casting No. 3055048R, Not a Welded Head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200201) $620.01
No Picture Cylinder Head, Remanufactured, 398065R - For International / Farmall tractor models 454, 464, 544, 574, 2400, 3514 (Gas), Compatible with International Construction and industrial models 3514 (Gas), Replaces International Casting number 398065R, 406790R, Engines C-157, C-175, C-200, Cylinders 4, Casting No. 398065R, 406790R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200205) $950.01
No Picture Cylinder Head, Remanufactured, 703873R3 - For International / Farmall tractor models B275, B414, 354, 424, 444 (Diesel), 454, 2424, 2444, 3444, Compatible with International Construction and industrial models 3414, 3444, Replaces International Casting number 703873R3, Engine BD-144, Cylinders: 4, Casting No. 703873R3, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 203719) $900.01
Cylinder Head, Used - For International tractor models 385, 454, 464, 484, 2400, Compatible with International Construction and industrial models 3400, 4500 (Diesel), Replaces International Casting number 3055048R, Engine(s): 179, Cylinders: 3, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 200201, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 400201) $375.01
No Picture Cylinder Head with Valves, Remanufactured, 3055048R4 - For International / Farmall tractor models 385, 454, 464, 484, 2400, Compatible with International Construction and industrial models 3400, 4500 (Diesel), Replaces International Casting number 3055048R4, Engine 179, Cylinders: 3, Casting No. 3055048R4, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 203814) $810.01
No Picture Cylinder Head - with Valves, Remanufactured, 398065R - For International / Farmall tractor models 454, 464, 544, 574, 674, 2400, 3514 (all gas), Compatible with International Engine (s) C157, C175, C200, Replaces Casting number 398065R, 406790R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with valves installed, Cleaned and tested for cracks, (Item #: 207264) $1150.01
Drive Plate - 13" Hydro - For International / Farmall tractor models Hydro 84, 268, 454, 474, 574, 685, Compatible with International Construction and industrial models 2400A, 2500A, Replaces International OEM number 404078R91, Spline Count: 11, Spline Diameter: 1.200", (Item #: 169938) $220.00
No Picture Exhaust Valve Seat - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460 (s/n 35093-earlier), 464, 544, 560 (s/n 36693-later), 574, 606 (s/n 35093-earlier), 656, 660 (s/n 38981-later), 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606 (s/n 35093-earlier), 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 151, 181, 205, 303, 315, 403 (s/n 2225-earlier), 453, 615, 715, Compatible with International Harvester (s) 414 (s/n 36693-later), 420 (s/n 36693-later), 616, 622, Compatible with International Construction and industrial models T6 (s/n 36694-56634), 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2500B, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C200, C221, C263, C291, C301, Replaces International OEM number 126373R1, (Item #: 185617) $4.10
Flywheel Ring Gear - The measurements on the Flywheel Ring Gear are: Inside Diameter 14.69 Inches, Outside Diameter 15.69 Inches, Teeth 159, Width 0.484 inches. This Flywheel Ring Gear is used on International models with C157. C175 and C200 Gas Engines. (Item #: 159140, Ref: 405861R1) $86.00
Flywheel With Ring Gear - For International / Farmall tractor models 454, 464, Compatible with International Construction and industrial models 2400A, 2400B, 3400A, Replaces Case IH OEM number 405860R11, Engines: C-175, C-157 (Gas), (Item #: 159137) $916.00
PTO Clutch Disc - For International / Farmall tractor models 454 (s/n 100000-earlier), 574 (s/n 100000-earlier), Compatible with International Construction and industrial models 2400A (s/n 100000-earlier), 2500A (s/n 100000-earlier), Replaces International OEM number 401717R1, (Item #: 155489) $14.60
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.30
Ring Gear - Ring Gear for models: 2400 Series, 454, 644, 844 (Item #: 3055133R1) $55.13
Ring Gear - For 385, 395, 454, 464, 484, 485, 495, 574, 584, 595, 684, 685, 695, 784. Flywheel Ring Gear. 126 tooth, 15.93 inch outside diameter, 14.625 inch inside diameter, .562 inches wide. (Item #: 103898, Ref: 60883H) $49.50
Valve Guide - For tractor models 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 172721, Ref: 3055022R2) $4.30
Valve Guide - For International / Farmall tractor models Hydro 70, Hydro 86, 454, 460, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3616, Replaces International OEM number 237248R1, (Item #: 128515) $5.70
Valve, Intake - Intake Valve. Some engines require 3, 4 or 6 Intake Valves. For tractor models 454, 464, 484. (BD179 CID Diesel 3-cylinder engine. Cupped head piston). (Item #: 128730, Ref: 3055055R2) $15.40
Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $52.00
Valve Seal - This is a positive type valve seal used on International Diesel Engines. Replaces 3218398R91, 3218399R1, 3228677R91 (Item #: 128633) $2.60
No Picture Valve Service Kit - Cylinder head service kit. For tractor models 454, 464, 484. Contains: springs, guides, locks, (no valves). (Item #: VSKH179) $194.00
No Picture Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.20
Valve Spring, Diesel - VALVE SPRING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, (706, 756, 786, 826, 886, HYDRO 86 all with D310 Diesel). (Item #: 173505, Ref: 3055060R1) $7.40

Engine Pistons and Sleeves
Piston and Ring Set, .020 - New Pistons, Pins, Retainers and Rings for C157 Gas Engine. 3.375 + 0.020 inch overbore. Used in 2400A, 2400B, 2405B, 2410B, 2412B, 4500, 454 (Item #: 183866, Ref: R8200) $464.00
Piston and Ring Set, .030 - New Pistons, Pins, Retainers and Rings for C157 Gas Engine. 3.375 + 0.030 inch overbore. Used in 2400A, 2400B, 2405B, 2410B, 2412B, 4500, 454. Replaces International OEM nos 533320R11, 539365R1 (Item #: 191374, Ref: R8201) $464.00
Piston and Ring Set, Standard - New Pistons, Pins, Retainers and Rings for C157 Gas Engine. 3.375 inch standard bore. Used in 2400A, 2400B, 2405B, 2410B, 2412B, 4500, 454 (Item #: 185425, Ref: R8199) $487.00
Piston Pin Bushing - Piston pin bushing, 4 used per engine. For C135, C146, C153, C157 CID gas 4 cylinder engines. Stepped head piston. For tractor models 2400A, 330, 340, 404, 424, 444, 504, 2504, 454, 3514, 2404, 2424, 2444, 2400B, 2405B, 2410B, 2412B, 4500. (Item #: 128635, Ref: 367775R1) $6.90
Piston Pin Bushing - PIN BUSHING. For 2544, 2706, 2756, 2826, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 674, 684, 686, 706, 756, 786, 826, 886, HYDRO 86. (Item #: 128516, Ref: 3132018R2) $5.60
No Picture Sleeve and Piston Kit - For tractor models 454, 464, 484. (BD179 CID Diesel 3-cylinder engine. Cupped head piston). Sleeves, pistons and rings, pins and retainers. For 3-1/2 inch standard bore. (Item #: PK179D) $272.88
Sleeve Orings, Pair - Used with D179 CID Engine on: 454, 464, 484. Used with D206 CID Engine 474, 584, 585. Used with D239 CID Engine on: 2544, 544, 574, 664, 674, 684, 685, 724, 824. Used with D310 CID Engine on 2706, 2756, HYDRO 86, 686, 706, 756. Used with D358 CID Engine on: 2826, (3088 below serial number 121247), (3288 below serial number 111090), 786, 826. Inside Diameter: 4.331 inch (110.00 MM). Thickness 0.197 inch (5.00 MM) Replaces 3228344R1, 3055021R2, 3218603R1. (Item #: 179427, Ref: SRK724) $5.30

Engine Rings
No Picture Piston Ring Set - PISTON RING SET For 454, 464, 484 will 179 3 cylinder diesel. Standard Bore 3 7/8 inches. Contains 3 compression 3/32 and 2 oil rings 3/16 per cylinder. (Item #: PRS179D) $96.42
No Picture Piston Ring Set - .020" Oversize - 4 Cylinder Set - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 4 cylinder set, For Single Cylinder Piston Ring Set use Item #: 120856, (Item #: 174302) $93.00
Piston Ring Set - .020" Oversize - Single Cylinder - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .020" Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For 4 Cylinder .020" Oversize Piston Ring Set use Item #: 174302, (Item #: 120856) $28.00
Piston Ring Set - .030" Oversize - 4 Cylinder - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per 4 cylinder set, For single cylinder use Item #: 150214, (Item #: 179376) $98.00
Piston Ring Set - .030" Oversize - Single Cylinder - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .030” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For standard use Item #: 150214, (Item #: 120857) $29.30
No Picture Piston Ring Set - .040" Oversize - 4 Cylinder Set - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 4 Cylinder Piston Ring set, For Single Cylinder .040" Oversize Piston Ring Set use Item #: 120858, (Item #: 174303) $95.00
Piston Ring Set - .040" Oversize - Single Cylinder - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Standard Bore: 3.375", Ring Size: .040” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold per cylinder, For .040" Oversize - 4 Cylinder Piston Ring Set use Item #: 174303, (Item #: 120858) $28.50
Piston Ring Set - .060" Oversize - 4 Cylinder - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Replaces International OEM number 539367R1, Standard Bore: 3.375", Ring Size: .060” Oversize, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as a complete 4 cylinder set, For standard use Item #: 150213, (Item #: 150214) $207.00
No Picture Piston Ring Set, For a Single Piston - Standard sized. For pistons with 3 3/8 inch bore, 2 x 3/32 compression rings and 1 x 3/16 oil ring. For tractor models 454, 2400A, 2400B, 2405B, 2410B, 2412B. (Item #: 108527, Ref: 2C7144) $31.00
Piston Ring Set - Standard - 4 Cylinder - For International / Farmall tractor models 424, 444, 454, 504, 2404, 2424, 2444, 2504 (all gas), Compatible with International Engine (s) C153, C157, Ring Size: Standard, Compression Rings per Piston: (2) @ .094", Oil Rings per Piston: (1) @ .188", Top Groove Size: .094", Top Groove Style: Barrel Face Triple Chrome, 2nd Groove Size: .094", 2nd Groove Style: Reverse Torsional Taper Face, 3rd Groove Size: .188", 3rd Groove Style: Chrome Rail / Oil Ring Spacer, Sold as 4 cylinder set, For single cylinder set use Item #: 150214, (Item #: 179373) $104.00

Exhaust System
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Style: Curved, Inlet I.D.: 2-3/8", O.D.Pipe: 2-1/2", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115481) $165.88
Exhaust Stack - 2-3/8" X 36", Curved Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number A29991, Style: Curved, Inlet I.D.: 2-3/8", O.D. Pipe: 4", Length: 36", Chrome Plated, Eliminates Muffler, Additional Handling and Oversize Fees Apply To This Item, (Item #: 115486) $209.00
Exhaust Stack - 2-3/8" X 36", Straight Chrome - For International / Farmall tractor models Super H, Super M, Super W4, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Replaces International OEM number 62476D, Style: Straight, Inlet I.D.: 2-3/8", O.D. Pipe: 3", Length: 36", Chrome Plated, Eliminates Muffler, (Item #: 115487) $134.11
Manifold - Intake/exhaust manifold. For tractor models 454, 464, 544, 574, 674, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500 with C157, C175, C200 engines with gas updraft. Replaces 398071R1. Exhaust goes up, off-center, not on the end. Uses R0301G gasket set, not included. (Item #: 101557, Ref: 406046R1) $154.00
Manifold - For vertical exhaust. Models: 454, 464, 574, 674, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500 with C157, C175, C200 engines with gas updraft. Replaces OEM# 406046R1. Gasket set available. (Item #: 101557, Ref: R0301) $154.00
Manifold Gasket Set - This Gasket Set is used with 406046R1 Manifold. (Item #: 108165, Ref: R0301G) $27.80
Muffler - Vertical Exhaust Inlet inside diameter 2 3/8 inch, outlet outside diameter 2 inch, overall length 30 inches. For International 454, 574, 674 Utility with C200 Gas or D239 Diesel Engines. OEM number use MC212 clamp, use R1800 rain cap. (Item #: 100821, Ref: R1657) $70.00
Muffler Eliminator - 2-3/8" X 24", Straight Chrome - For International / Farmall tractor models H, M, Super H, Super M, Super W6, W4, W6, 300, 340, 350, 400, 424, 450, 454, 460, 544, 560, 574, 656, 660, 706 (all with 2-3/8" O.D. manifold pipe), Inlet I.D: 2-3/8", O.D. Pipe: 3", Length: 24", Straight Pipe, Chrome Plated, Eliminates Muffler, (Item #: 115491) $81.17
Muffler, Vertical - Black, 2-3/8 inch inlet, 2-3/8 inch outlet, 27 inches overall length. For tractor models UK series; 454, 474, 475, 574, 674. Replaces 529372R91, 529372R1, 529365R91 (Item #: 121133, Ref: 529372R91) $78.00
Muffler, Vertical - Oval body 4 inches by 8 inches dimension, 3 inches inlet length, 2-3/8 inch inlet I.D., 19 1/2 inch shell length, 23 1/5 inch outlet O.D., 2 inch outlet O.D., 46 inches overall length. For tractor models 784, 674, 884, 584, 385, 464, 684, 454, 484, 885, 2400, 574, 485, 585, 685, all built from 1982 with diesel engine. (Item #: 100285, Ref: 83207C1) $96.00

Fuel System / Air Intake
Air Cleaner Hose - For International / Farmall tractor models 454, 544, 574, 606, 656, 674, 706, 756, 766, 806, 826, 856, Compatible with International Construction and industrial models 2400, 2500, Replaces International OEM number 382400R1, A: 2.25", B: 2.50", (Item #: 163507) $13.00
Cable Clip for Marvel Schebler Carburetors - Many Marvel Schelber Carburetors use one of these clips to secure the choke or the fuel cable. On Farmall / International it fits: [ 2404, 2424, 2444, 2504, 2544, 2656, 330, 340, 404, 424, 444, 454, 464, 504, 544, 574, 656, 666, 674, 686 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ], [ 2826, 664, 826 (For diesel fuel shut off cable bracket) ], [ Industrial: 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3514, 4500A, 4500B, 8000 (For choke cable bracket with Marvel Schebler carb # TSX748, TSX827, TSX857, TSX896, TSX896SL, TSX927, TSX932, TSX932SL, TSX933, TSX934, TSX940, TSX943, TSX959, TSX974) ]; Replaces: 373373R1, 29-81, B110-10 (Item #: 126116, Ref: CT29-81) $5.10
Cable - Fuel Stop / Shutoff, 529000R1 - For International / Farmall tractor models 454 (Diesel), 464 (Diesel), Compatible with International Construction and industrial models 2400 (Diesel), Replaces International OEM number 529000R1, Length: 32", (Item #: 161929) $14.90
Carburetor - With reversible linkage. This Zenith Carburetor outperforms the original carbs used on: 464, 504, 544, 656, 574, 666, replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, 934SL, 974SL, TSX984SL. Center to center on the 2 mounting bolts is 2 11/16 inches. Made in USA, 1 year warranty. (Item #: 100752, Ref: 14996) $430.00
Carburetor - With reversible linkage. This Zenith Style Carburetor outperforms the original carbs. Replaces Marvel-Schebler numbers TSX857, TSX934, TSX940, TSX946, TSX927, TSX939, TSX959, TSX985SL and TSX940SL, TSX934SL, TSX974SL, TSX984SL. International part numbers 381945R93, 396737R93, 396738R92, 396966R91, 398069R91, 398069R92, 399355R93, 400348R91, 401379R91, 404731R91, 405530R91, 405869R94, 535134R91, 535135R91 Center to center on the 2 mounting bolts is 2 11/16 inches. 1 year warranty. (Item #: 183805, Ref: 14996B) $320.00
Carburetor Float - For tractor models 105, 203, 210, 230, 2500A, 2500B, 275, 375, 454, 464, 504, 544, 574, 656, 666, 686, HYDRO 70, HYDRO 86, ALL WITH MARVEL-SCHEBLER LARGE BOWL CARBURETORS. 381962R1 (Item #: 105095, Ref: R2383) $21.40
Carburetor Kit, Comprehensive - This comprehensive carburetor kit is for Marvel-Schebler numbers: TSX943, TSX959, TSX984SL, TSX985SL. For International tractor models 2400A, 2400B, 2500A, 2500B, 3400A, 3500A, 3514, 444, 454, 464, 574 and 674. The kit contains all the parts shown. (Item #: 184326, Ref: R7893) $74.00
Carburetor Kit, Comprehensive - This Comprehensive Carburetor Kit is for Marvel-Schebler carburetor number TSX934. The kit contains all the parts shown. (Item #: 185007, Ref: R7891) $63.00
Carburetor, Rebuilt - This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX857, TSX484, TSX596, TSX925, TSX934, TSX959, TSX968, TSX980, TSX985. For the following tractor models: 504, 454, 544, 574, 674, 2400A, 2500A, 2500B. Add $125.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. (Item #: 203319, Ref: 1434-CARB) $390.01
Carburetor Repair Kit - Basic repair kit for Marvel-Schebler carburetor. Fits carburetors: TSX939, TSX984SL, TSX985SL, TSX939, TSX984SL, TSX985SL.For tractor models: 454, 464, 574, 674, 2400A. 2500B. For combine 101, 103. For 101, 103, 2400A, 2400B, 2500A, 2500B, 454, 464, 574, 674. (Item #: 185585, Ref: BK318) $26.40
Fuel Bowl Glass - Fuel bowl, glass, 3-5/8 inch diameter, 3/8 inch bottom hole, for diesel engines. To engine serial number 120520. For 2400A, 454, 464, 484, 574, 584, 664, 674, 684, 784, HYDRO 84. (Item #: 107042, Ref: 3144478R1) $9.50
Fuel Filter Bolt Assembly - Fuel bowl bolt assembly Replaces 9918145, 9918125, 81825363 May be used in other applications, such as : Claas, Fendt, Fiat, JCB, Kioti, Landini, Land Rover, Lamborghini, Leyland, Long Tractor, Matbro, McCormick, Merlo, Mitsubishi, Nuffield, Renault, Same, Satoh, Volvo (Item #: 179323, Ref: 81825363) $16.30
Fuel Filter, CAV type - Fuel filter for tractor models 2300, 2400, 2424, 2444, 248, 2500, 2500A, 258, 268, 3414, 3514, B414, 1294, 1394, 1494, 1594, 2350, 276, 278, 354, 364, 384, 385, 424, 433, 434, 444, 454, 484, 485, 533, 574, 584, 585, 633, 644, 674, 684, 685, 733, 744, 784, 785, 833, 844, 884, 885, 201. Replaces: 1502155C91, 1966515C1, 3044506R93, 3144477R92, 796051R91, P143287. NOTE: verify you have CAV type filter before ordering. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. (Item #: 158868, Ref: CAV7111296) $9.30
Fuel Filter / Spin On - For tractor models 385, 454, 484, 544, 574, 664, 674, 684, 685XL, 686, 706, 756, 785, 786, 826, 884, Hydro 86, 2400, 2500, 3088, 3288. (Item #: 125844, Ref: 3132428R2) $18.50
Fuel Injector Nozzle Sleeve - This Fuel Injector Nozzle Sleeve is used on D155, D179, D206, D239, D246, D268, DT268, D310, and D358 Engines. Brass Construction, 3.190 inch overall length 0.386 inch injector tip inside diameter. Replaces 73055344, 3055344R1 (Item #: 165847, Ref: 3055344R1) $24.60
Fuel Pump - Replaces B503521. For tractor models 1046 6 cylinder D358 diesel engine, 1056 6 cylinder D358 diesel engine with CAV pump, 454 D206 diesel engine (European Edition), 574 D239 diesel engine (European Edition), 674 D239 diesel engine (Europea Edition), 856 DT239 diesel engine, 946 6 cylinder D310 diesel engine. Replaces 3055375R93, 3132697R91, 3132697R92, B503521 (Item #: 153676, Ref: 3132697R92) $45.30
Fuel Sediment Bowl Bail Assembly - This bail fits 1.280 inch tall glass bowls. It is 2.700 inches in length. Replaces OEM numbers: 0W446, 1001515M91, 15P15, 1JS-5305, 223247, 2N9166, 49947DX, 70223247, A11212 (Item #: 113631, Ref: 2N9166) $5.78
Fuel Sediment Bowl Gasket - Gasket, Sediment Bowl. 2 inch outside diameter. This gasket may come with a bonus screen that may not work for your particular tractor. Used on Case Tractors with 2 inch outside diameter sediment bowls. Replaces original part number 13193D. Gasket may be cork or rubber depending on availability. (Item #: 105383, Ref: 2NAA916061) $2.70
Fuel Sediment Glass Bowl - 2 inch glass bowl with a length of 1.280 inches. Uses gasket NAA9160A, not included. Replaces A11209 and 357958R1. Will fit the following modelsusing/ 1.280 inch long glass bowl: A, Super A, Super A-1, Super AV, Super AV-1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, Hydro 100, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 454, 460, 464, 504, 544, 574, 606, 656, 656, 674, 706, 756, 806, 826, 856, 1026, 1066, 1206, 1256, 1456, 1466, 1566. Replaces A11209 and 357958R1. (Item #: 105382, Ref: 9N9162) $3.20
Fuel Sending Unit - For International / Farmall tractor models 454, 464, 574, 674, 2400, 2500, Replaces International OEM number 531974R2, (Item #: 119769) $69.00
Fuel Shutoff Valve - The threads on this fuel shutoff valve are 1/2 - 20 and 3/8 - 18 NPTF. Used on C50, C60, C70, C80, C90, C100, 385, 395, 485, 495, 585, 595, 685, 695, 785, 885, 895, 995, 3220, 3230, 4210, 4230, 4240, Hydro 84, 248, 258, 268, 278, 385, 454, 464, 474, 484, 485, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2400, 2400A, 2500, 2500A (Item #: 135040, Ref: 528926R1) $24.30
Fuel Solenoid - For International / Farmall tractor models Hydro 70, Hydro 86, 350, 444, 454, 464, 504, 544, 574, 666, 674, 686, 2400A, 2504, 2544, Compatible with International Construction and industrial models 2400A, 2504, 3400A, 3500A, 3514, Compatible with International Engine (s) C153, C175, C200, C291, Replaces International OEM number 386015R91, 396739R91, 396739R92, 396739R93, 530184R1, 71358C2, 71358C91, 71358C92., For Marvel Schebler carburetors only, not for International carburetors, (Item #: 111797) $133.00
Injector Nozzle - For tractor models 454, (464 up to serial number 027205 with nozzle number DLLA150S417), 544, 560, 574, 656, 660, 664, 674, 706, 786, 826, (886 serial number 14472 and up), 2544, 2656, 2706, 2826. (Item #: 179950, Ref: 3055428R92) $37.80
Manifold Heater - Thermostart Intake Manifold Heater Diesel Engines. Has Applications in many Diesel Models. Replaces Part Numbers: 218349A1, 162000090701, A77616, 3112805R91, K928523, 3118299R1 (Item #: 118792, Ref: 3583543M2) $10.90
Needle Valve - Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: 424 (late), 444 (late), 454, 504 (late), 544, 574, 656, 666, 674, 686. Replaces 392096R91. (Item #: 179751, Ref: C3NN9D532A) $7.00
Sediment Bowl Assembly - This sediment bowl assembly has 3/8" pipe inlet and 1/8" pipe outlet Includes a 5/16" line compression adapter fitting. For Cub, Cub Lo-Boy, A, B, Super A, AV AI, AV1, C, Super C, 100, 130, 140, 154, 184, 185, 184 Cub, Cub 185 Lo-Boy, 200, 230, 2400A, 2404, 2500A, 2504, 2606, 2656, 340, 404, 454, 460, 464, 504, 574, 606, 656, 674, 884. Fuel Strainer Assembly with 3/8 inch pipe connection to tank, 1/8 inch pipe outlet. Replaces Replaces: 354222R91, 355142R91, 369988R91, 38465D, 51066DC, 61782C91. (Item #: 105370, Ref: 61782C91) $16.00
Sediment Bowl Gasket and Screen - This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: 13194D, 25854, 49923D (Item #: 105364, Ref: 49923D) $3.50
Sediment Bowl Screen - For International / Farmall tractor models A, B, C, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 240, 340, 454, 460, 464, 504, 574, 606, 656, 674, 686, 2400A, 2404, 2500A, 2504, 2606, 2656, Compatible with International Hay Cutting (s) 201, 210, 230, 275, 375, 4000, 5000, 5500, Replaces International OEM number 49923D, Diameter: 2", Diameter Hole: 1/4", For Sediment Bowl Assembly use Item #: 105370, (Item #: 105371) $4.00
No Picture Throttle Friction Disc - This Throttle Friction Disc measures 0.165 of an inch thick, 1.960 inches outside diameter and has a center hole of 0.530 of an inch diameter. For models 240, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, 274, 284, 340, 3444, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884 and Hydro 84. Also replaces 388632R1, 394716R1 and 399168R1. (Item #: 178163, Ref: 369463R1) $6.10
Throttle Knob - For tractor models 384, 454, 464, 544, 574, 656, 664, 666, 674, 686, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 2400, 2500, 2544, 2656, 2756, 2826, 2856, 3110, 4366, (4386, 4568, 4786 4WD), Hydro 70, Hydro 86, Hydro 100. (Item #: 111041, Ref: 397931R2) $7.10

Gauges
Ammeter Assembly - (30-0-30) 2 inch body diameter. Replaces, 393334R91, 354473R91, 360053R91, 378424R91, 536229R1. For tractor models 140 serial number 57724>, 2400A, 2500A, 454, 464, 574, 674, Cub serial number 248125>, Cub 184. (Item #: 121632, Ref: A0NN10670A) $6.60
No Picture Tachometer Cable - This cable is for gas models. The cable is 38 inches total length. For tractor models 2400, 454, 464, 574, 674 all with gas engines. (Item #: 121525, Ref: 529795R92) $47.40
Tachometer Drive Gear Assembly - This Tachometer Drive Gear Assembly has 13 Teeth and is 1.765 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368245R12, 368245R11, 178575H1 (Item #: 164574, Ref: 368245R11) $61.00
Tachometer Drive Housing Fitting - This Tachometer Drive Housing Fitting is 3/4 inch - 20 pipe thread to 7/8 inch - 18 thread, 1.407 inches overall length. Fits C157, C175, C200, C221, C263, C291, C301, D166, D188, D236, D282 and D301 engines. Replaces 368246R1, 178309H1 (Item #: 164575, Ref: 368246R1) $24.85
Tachometer Gauge, Remanufactured, 66455C1 - For International / Farmall tractor models 454, 464, 484, 574 (s/n 100001-later), 584, 674, 684, 784, 884, 2400A (s/n 100001-later), 2500A (s/n 100001-later), Replaces International OEM number 66455C1, (Item #: 204000) $158.01
Temperature Sender - This water temperature sending unit is used on International 1970 - 1985; 74 Series: 354, 374, 444, 454, 474, 574, 674. 84 Series: 384, 484, 584, 684, 784, 884. 85 Series: 385, 485, 585, 685, 785, 885, 985. International pre 1970: 276, 434, 444. It replaces 3073787r1, 3127956R1, 709280R91 (Item #: 155914, Ref: 3127956R1) $13.60
Tractometer - This Tractometer fit most gas and diesel models 454, 464, 574 Hydro, 674, 484, 584, 684, 784, 884, 885, 2400, 2500A Hydro (serial number 100001 and below). S61427 Tractometer replaces 66455C1, 3121926R91, 3125106R92. (Item #: 110414, Ref: 66455C1) $47.50
Water Temperature Gauge - This Water Temperature Gauge is used on: International 1970 - 1985; 74 Series: 354, 374, 444, 454, 474, 574, 674. 84 Series: 384, 484, 584, 684, 784, 884. 85 Series: 385, 485, 585, 685, 785, 885, 985. International pre 1970: 276, 434, 444. Replaces 3127959R3, 3127959R4, 709280R91. Does not include sender. Use 3127956R1 sending unit if needed. (Item #: 113474, Ref: 3127959R3) $33.60

Hitch / Drawbar
Drawbar Pin Retainer Plate - Used on the following Farmall / International models: H, M, 560, 806, 1066, MD, MTA, W6TA, W9, O4, WD9, WR9, Super WDR9, OS4, Super H, Super M, Super MD, Super MTA, Hydro 84, Super W4, Super W6, Super W6TA, Super WD6, Super WD9, W4, W6, WD6, WDR9, WR9S, 300, 330, 340, 350, 400, 450, 454, 460, 464, 504, 544, 574, 600, 606, 650, 656, 660, 664, 666, 674, 706, 756, 766, 826, 284, 856, 966, 1026, 385, 484, 584, 684, 686, 784, 884, Super MDTA, Super WD6TA, Super WR9S, Super W9, WD6TA, this part measures 1.480 inches long, 1 inch wide and has a 0.377 inch hole diameter and 0.193 inch thick. Many of the listed models used a round plate rather than the rectangular one. This part will replace the round version. Replaces OEM numbers 132794H1, 491390, 49139D, 57654D, 57655D, 58657D (Item #: 112643, Ref: 49139D) $7.50
Leveling Box Assembly - 19-1/4 inch minimum length, 24 inch maximum, spacing between forks is 1 inch. For tractor models (UK series, B275, B414, 424, 444, 354, 364, 384, 3414, 2424, 2444, 434, 454, 385). (Item #: 164849, Ref: 3069056R91) $128.00
Leveling Box Assembly, RH, Cat I - For tractor models 454, 464, 484, 485, 495, 574, 584, 585, 595, 674, 684, 784, 884. Measures 23 3/4 inch minimum, 28 inch maximum, 1 7/8 inch gap in yoke for thick lift arm. (Item #: 180468, Ref: 223320) $178.75
Leveling Fork Nut - This Leveling Fork Nut is used with 3121964R1 and 402635R4 fork. Replaces original part number 527937R1. (Item #: 110735, Ref: 527937R1) $7.00
Leveling Rod Fork - Housing, leveling screw. Cat I. (14.500 inches long) 1 inch wide fork. Tractors: Hydro 84, 385, 395, 454, 464, 484, 485, 495, 574, 584, 585, 595 with fixed lower link, 674, 684, 685 with fixed lower link, 695, 784 with fixed lower link, 895, 995 ; 3220, 3230 with out telescopic lower link; 4210, 4230, 4240 with out telescopic lower link. (Item #: 108812, Ref: 3121964R91) $66.00
Leveling Screw Bearing - For International / Farmall tractor models B414, Hydro 84, 354, 384, 385, 424, 454, 464, 484, 485, 574, 584, 585, 674, 684, 685, 784, 884, 885, Compatible with International Construction and industrial models 2300A, 2400, 2424, 2444, 2500, Replaces International OEM number 3069064R1, (Item #: 124568) $40.00
Leveling Yoke Left Hand - This Left Hand Leveling Yoke is 14.380 inches long. It used on 385, 385 UK Series, 395, 395 UK Series, 454, 454 UK Series, 484, 484 UK Series, 485, 485 UK Series, 485XL, 485XL UK Series, 495, 495 UK Series. Replaces original part number 527697R91, 527967R1, 527967R91, 527967R1 (Item #: 113615, Ref: 527967R91) $25.00

Hydraulic System
Filter, Hydraulic Oil - 5 inch outside diameter, 1-15/16 inch inside diameter, 3 inches tall. For tractor models (454, 574 syncromesh), 464, 574, 484, 584, 684, 784, 884, 385. (Item #: 110865, Ref: 530144R92) $18.90
Hydraulic Seal Kit - Hydraulic Cylinder - For International / Farmall tractor models 454, 2400A, Replaces International OEM number 545829R93, 545829R91, 545829R92, For use on cylinder 545223R92, (Item #: 153315) $24.40

Lights
Light Bulb, Sealed Beam, 12 Volt - This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 131508C1, 134039H1, 144072H1, 21-521R1, 371461R91, 373662R1, 373662R91, 394770R2, 535850R1, 635959R91, 725-0133, 725-0222, 725-0588, 80627C1, 9410891, 86594207, 87779219, 925-0222. (Item #: 111241, Ref: 373662R91) $9.10
Light Switch, 12 Volt - For tractor models (Cub serial number 224401 to 227700), (Cub Lo-Boy serial number 18701 to 21575), (140 from serial number 26801 and up), 1206, Cub 154 Lo-Boy, Cub 184 Lo-Boy, Cub 185 Lo-Boy, 354, 404, 424, 444, 454, 464, 504, 574, 606, 674, 706, 806, 1256, 2300, 2400A, 2404, 2424, 2444, 2500A, 2504, 2606, 21256, 3444, 4100, 4156, 403. (Item #: 125705, Ref: 376851R91) $28.00
Safety Light Amber - 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. Replaces 10A26292, 164177AS, 199954A1, 1K7361F, 248110, 249139, 30-3390705, 3123675R92, 394129R1, 512566M91, 512567M91, 513058M91, 531627R91, 602603ASA, 67538C92, 677540, 70248110, 70249139, A143600, A34853, AA34967, AH164497, AR38456, AR50580, AT22066, AT23467, C5NNA3N359E, D49734, D4NN13N359A, D6NN13N359B, D9NN13N359AA, W164177AS, 130609, L660A-12V, L725-12V, SW02981, TP-AR50580, WN-WL810, 122128 (Item #: 122128, Ref: S.61357) $20.00
Sealed Beam Bulb 12V - This Sealed Beam Bulb is 12 Volt, 40 Watt, 3 Lug Terminal Type. It is 4-1/2 inch diameter. Replaces 83910047, 3072947R91, 3070494R91, K962146, D6NN13N007A, 54051293, 81806938, C5NN13N007A, ATJ8746, 535505M1, K915874 (Item #: 124720, Ref: D6NN13N007A) $27.40
Switch, Light - Fits Cub (serial number 224401 >, Cub Lo-Boy (serial number 18701 >), Cub 154 Lo-Boy, Cub 185 Lo-Boy, 140 (serial number 26801 to 57723, with GENERATOR, 140 (serial number 57724 >, with ALTERNATOR), 184, 354, 4100, 4156, 444, 454, 464 (serial number < 109150), 574 (serial number < 114908), 674 (serial number < 108104), 2300, 2444, 2500 (serial number < 114908).376851R92 (Item #: 125705, Ref: 376851R91) $28.00

Miscellaneous
No Picture Hydraulic Pump, 18 GPM - For International / Farmall tractor models 454, 574, Compatible with International Construction and industrial models 2400, 2500, Replaces International OEM number 544708R92, (Item #: 171563) $743.50
Pilot Relief Valve - For International / Farmall tractor models Hydro 100, 454, 574, 656, 766, 806, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2400A, 2500A, 2656, 2806, 2856, 4100, 4156, 4166, 4186, 21026, 21206, 21256, 21456, Replaces International OEM number 388208R93, 388208R91, 388208R92, 2000 psi, (Item #: 154338) $170.00

Oil System
Oil Filter - Oil filter element, spin on type. Approximate diameter 7.17 inch height, 3.69 inch outside diameter. For diesel engines: D282. D312, D and DT414, D and DT 436, D and DT466. For 1066, 1086, 1460, 1466, 1470, 1480, 1486, 1566, 1586, 2656, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 5088, 5288, 5488, 6388, 656, 6588, 666, 6788, 686, 7288, 7488, 815, 85, 915, 966, 986, HYDRO 100, HYDRO 186, HYDRO 70, HYDRO 86. (Item #: 111132, Ref: A184775) $14.90
Oil Filter Spin On - Oil filter element, spin-on type. Approc, diameter 5.37 inch height, 3.68 inch outside diameter. For gas engines: C157, C175, C200, C291. For diesel engines: D179, D209, D236, D239, D246, D310, D358. For 2544, 2706, 2756, 3088, 3288, 454, 464, 474, 484, 544, 574, 584, 585, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 826, 886, HYDRO 70, HYDRO 84, HYDRO 86. (Item #: 124840, Ref: 3136046R93) $9.80
Oil Pan Drain Plug - White Zinc Finish, 7/8 inch - 18 UNF. Fits multiple models. Washer available as part number EBU6734A, not included. Replaces: 688067C1, 359875R1. (Item #: 126591, Ref: C5NE6730B) $8.10
Oil Pan Drain Plug Washer - This washer is used with C5NE6730B 7/8 inch Oil Drain Plug. (Item #: 140612, Ref: EBU6734A) $1.70
Oil Pressure Switch - For tractor models Cub 154, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 21206, 21256, 21456, 2400A, 2500A, 2706, 2756, 2826, 2856, 3388, 3588, 3788, 385, 454, 464, 484, 485, 574, 584, 6388, 6588, 674, 6788, 684, 716, 756, 766, 784, 786, 806, 826, 856, 884, 966, 986, Hydro 100, Cub 185 Lo-Boy. (Item #: 124745, Ref: 3129031R91) $15.80
Oil Pump - For tractor models 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 2544, 3400A, 3500A, 3514, 4500, 454, 464, 544, 574, 674 For C157, C175 and C200 Gas Engines. Replaces 398073R93 (Item #: 128684, Ref: 601-1129) $344.00
Oil Pump - For tractor models 385, 395, 454, 464, 484, 485. All with D179 3 cylinder diesel engines. (Item #: 112408, Ref: 3136429R95) $288.01