International Harvester / Farmall 340 Tractor Parts

[Categories]   [All Farmall Models]   [Print]  

Accessories / Supplies
Engine Block Heater - Frost plug heater with cord. 600 watt, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Replaces 407046R92. Cord is 12 inches long. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D. For 2504, 2806, 315, 340, 403, 453, 460, 503, 504, 560, 606, 615, 656, 660, 706, 715, 806. (Item #: 120027, Ref: 106725A1) $41.90

Brakes
Bonded Lined Brake Disc - 6 inch, 10 spline. For tractor models 340 Diesel, 460, 504, 606, 2504, 2606. Replaces: 1975460C2, 368292R92, 1975462C3, 404918R91. (Item #: 105448, Ref: 1975460C3) $18.40
Brake Actuating Assembly - For tractor models Super C, 200, 230, 240, 330, 340, 404, 2404. (Item #: 105435, Ref: 364837R91) $257.00
Brake Actuating Spring - Used with disc brakes. For tractor models H, HV, Super C, Super H, O4, OS4, W4, 200, 230, 240, Farmall 300, 330, 340, Farmall 350, 404, 460, 504, 544, 606, 2404, 2504, 2544, 2606, 203, 205, 315, 615. Replaces: 354627R1 (Item #: 116863, Ref: A30910) $7.70
Brake Actuator Assembly - For International / Farmall tractor models 330, 340, 460, 504, 2504, 2606, Compatible with International Combine (s) 315, 615, Replaces International OEM number 368293R91, (Item #: 105438) $255.00
Brake Boot - This Brake Boot is used on OS4, Super C, Super H, Super HV, Super W4, 200, 230, 240, 330, 340, 350, Farmall Rowcrop: 300, International Utility: 300, 350. Two used per tractor. Sold Individually. Replaces 370877R1, 355976R1 (Item #: 112347, Ref: 370877R1) $6.60
Brake Kit - For International / Farmall tractor models 330, 340, 460, 504, 606, 2504, 2606, Replaces International OEM number 368292, 830617, A30910, Kit Includes 2 Brake Discs, 4 Steel Balls, 2 Brake Springs, (Item #: 162741) $57.00
Brake Kit - For International / Farmall tractor models Super C, 200, 230, 240, 330, 340, 404, 2404, Replaces International OEM number 368181, 830617, A30910, Kit Includes 2 Brake Discs, 3 Steel Balls, 2 Brake Springs, (Item #: 162743) $49.00
No Picture Brake Operating Rod and Yoke - For International / Farmall tractor models Hydro 70, Hydro 86, 330, 340 (Farmall and International), 460 (Farmall and International), 504 (Farmall and International), 544 (Farmall and International), 606 (gas), 656 (Farmall and International), 664, 666 (gear drive), 686 (gear drive), 2504, 2544 (diesel), 2606 (diesel), 2656 (diesel), Replaces International OEM number 403840R2, 368297R1, 403840R1, 368297R11, 388271R1, (Item #: 111363) $114.00
Brake Operating Rod Ball - ** NIS - No Due ** For tractor models 240, 2404, 2504, 2544, 2606, 2656, 330, 340, 404, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, Hydro 100, Hydro 86. (Item #: 150735, Ref: 368298R1) $12.20
Brake Pedal Shaft Seal - This brake pedal shaft seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. It Fits: 230, 3514, B-450, C, H, HV, I6, ID6, M, MD, MDV, MTA, MTAV, MV, Super C, Super H, Super HV, Super M, Super MD, Super MDTA, Super MDV, Super MDV-TA, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6, Super W6TA, Super WD6TA, W4, W6, W6TA, WD6, 200, 240, 300, 330, 340, 350, 3600A, 3616, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 400, W400, 450, W450, 8000, Hydro 70, Hydro 86. Replaces: 354514R91, 360076R92, 364471R91, 380959R91, 380960R91, 47169A, 555397R91, 581646R91, U17944, 476838 (Item #: 153586, Ref: AB2578R) $15.60
Disc Brake Ball Bearing - Measuring 7/8 inches, this ball bearing is used in many disc brake systems. Typically 4 or 6 used per wheel. Replaces OEM numbers 09384AB, 150734A1, 16028R1, 166264, 16779X, 17028R1, 20063060, 2073622, 211-1028, 211-1328, 211-19, 211-221, 31-1750393, 33-0026328, 50A4272, 706039R1, 706039R2, 72073622, 7A2606, 0166264, 81716998, 81847078, 81866502, 82979987, 87554519, 87672308, 9170150, 920095936, 9959976, 9960587, BDB78, D5NN2N141A, E94FB9, E9NN2N324AA, E9NN2N324AB, GM145662, K963645, M830T, O9384AB (Item #: 126209, Ref: M830T) $2.30
Disc Brake Boot - For International / Farmall tractor models H, HV, OS4, Super C, Super H, Super HV, Super W4, 200, 230, 300, 330, 340, 350, Replaces International OEM number 355976R1, For Disc Brakes, (Item #: 112348) $7.00
Lined Brake Disc - This Brake Disc is 5 inches in diameter. It is 2-3/4 in diameter at the inside of the lining. It has 10 spline with a 1.625 inch Major and 1.395 inch Minor inside diameter. It is 9/16 of an inch in width. For tractor models Super C, 200, 230, 240, 330, 340 gas, 404, 2404. Price is for 1 disc. Part may be bonded or riveted depending on availability. Replaces: 1975456C3, 1975456C2, 356071R91, 368181R91, 368181R92, 368983R91 (Item #: 105446, Ref: 1975456C3) $15.20

Clutch
No Picture Clutch Alignment Tool - 1-1/8 inch 10 spline, 1-3/4 inch 16 spline, 13/16 inch pilot. For tractor models 300, 330, 340, 350, 504, 544, 606, 656, 2500, 2504, 2544, 2606, 2656, (3444 with dial 9 inch, 11 inch discs). (Item #: 122257, Ref: S.70921) $27.80
No Picture Clutch Alignment Tool - 1-1/8"x10 and 1-11/16"x16 Spline, .787" Pilot - For International / Farmall tractor models 300, 330, 340, 350, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, 3616, Pilot Diameter: .787", 1st Spline: 1-1/8", 10 Spline, 2nd Spline: 1-11/16", 16 Spline, (Item #: 176767) $46.50
Clutch Alignment Tool - 1-3/32"x10 and 1-11/16"x16 Spline - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686, 2500, 2504, 2544, 2606, 2656, 3514, 3616, 8000, Pilot Diameter: .787, Large Spline: 1-11/16" 16 Spline, Small Spline: 1-3/32" 10 Spline, (Item #: 122048) $27.80
Clutch Bearing - Release bearing for tractor models 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Inside diameter 2.0625 inches, outside diameter 3.625 inches, width .7969 inches. Please verify measurements before ordering. Replaces 18567D, 362028R91, 362028R92, 55211D, 55212D (Item #: 107007, Ref: N1087) $20.20
Clutch Bearing Seal Kit - For International / Farmall tractor models 330, 340, 504, 2504, Contents: 1-832375 Release Bearing, 1-836204 Pilot Bearing, 2-363514 IPTO Seals, 1-252556 IPTO Bearing Cage O-Ring, (Item #: 108787) $86.00
Clutch Disc - 10-1/2 inch diameter, 1-1/8 inch hub, 10 spline. For tractor models 300, 330, 340, 350, 460, 504, 655, 606, 2500, 2504, 2544, 2606, 3616, 8000. (Item #: 166104, Ref: 384633R91) $189.00
Clutch Disc - TORQUE AMPLIFIER Clutch Disc. This disc is a 7 inch disc with 14 splines. For tractor models Super M, Super W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2544, 2656. (Item #: 113817, Ref: 375701R91) $126.00
Clutch Disc - Inner, Used - For International tractor models 330 (1/57-12/58), 340 (& Farmall, Gas and Diesel, 1/58-12/63), 460 (& Farmall, Gas and Diesel, 1/58-12/60), 504 (& Farmall, Gas and Diesel, 1/60-12/68), 560 (& Farmall, Gas and Diesel, 1/58-12/63), 606 (Gas, 1/61-12/67), 660 (Gas and Diesel, 1/59-12/63), 2504, 2606 (Diesel, 1/61-12/67), Replaces Case IH OEM number 374033R1, For a new version of this item use Item #: 168580, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 457216) $4.76
Clutch Disc, Organic - New, 10.5 inch, spring loaded, 1.125 inch spline diameter, 10 splines. For tractor models 2500, 2504, 2544, 2606, Farmall 300, 330, 340, Farmall 350, (3616 diesel serial number up to 2117 or gas up to serial number 1945), 460, 504, 544, 606. (Item #: 156475, Ref: 360488R92) $93.58
Clutch Disc, Remanufactured, 360488R92 - For International / Farmall tractor models 300, 340, 350, 460, 504, 606, Compatible with International Construction and industrial models 3616, Replaces International OEM number 360488R92, 360488-RO, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, For a New version of this sku use Item #: 156475, (Item #: 204410) $100.00
Clutch Disc, Remanufactured, 375701R91 - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, 375701HD4, Clutch Size: 7", Clutch Hub: 1-1/2", Clutch Spline: 14, Clutch Center: Solid, Clutch Type: TA 4 Pads, (Item #: 205230) $135.00
Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2404, 2544, 2606, 3616, Compatible with International Construction and industrial models 3514, 3616, Replaces International OEM number 384633R91, 384633R91R, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 6 Reg Pads, (Item #: 205053) $175.50
Clutch Disc, Remanufactured, 384633R91 - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, 3616, Replaces International OEM number 384633R91, 384633R91R, H384633, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: 4 Reg Pads, (Item #: 205990) $95.00
Clutch Kit - For International / Farmall tractor models 300, 330, 340, 350, 460, 554, 606, 2504, 2544, 3616, Replaces International OEM number 360488R92, 360746R1, Clutch Size: 10-1/2", Clutch Hub: 1-1/8", Clutch Spline: 10, Clutch Center: Spring, Clutch Type: Woven, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Hub Diameter: 1-11/16", Pressure Plate Splines: 16, (Item #: 156480) $295.00
Clutch Kit, 10-1/2 Inch - This remanufactured single stage clutch kit includes a 10 1/2 inch, 9 spring, 16 spline, 1 11/16 inch hub remanufactured pressure plate assembly, a 10 1/8 inch, 10 spline, 1 1/8 inch hub, 4 pad remanufactured clutch disc; new release bearing and two new pilot bearings. For tractors: 300, 320, 330, 340, 350, 460, 504, 544, 606. Industrial: 2500, 2504, 2544, 2606, 3616 (gas to serial number 1945 and diesels to serial number 2117). (Item #: 202008, Ref: 360746NC) $329.60
Clutch Kit, 7 Inch - This remanufactured torque amplifier clutch kit contains a 7 inch, 6 spring pressure plate assembly (360215R94), a new 7 inch 14 spline 1 1/2 inch hub, solid, metallic clutch disc (375701R91), and new release bearing (362028R92). Add $50.00 core charge to price, you will receive instructions for returning your core for a refund if you have one available. For tractors: Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2606, 2656. (Item #: 202007, Ref: 360215NC) $226.60
Clutch Release Bearing Carrier - For tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 454, 460, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 784, 884. (Item #: 111734, Ref: 360501R2) $54.00
Clutch Release Bearing Carrier, Used - For International tractor models 300, 330, 340, 350, 460, 474, 504, 544, 574, 606, 656, 664, 666, 674, 686, 2504, 2544, 2606, 2656, Replaces International OEM nos 360501R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 431168) $20.01
Pressure Plate Assembly, Remanufactured, 360215-R - For International / Farmall tractor models Super MTA, Super W6, W6, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 360215-R, 360215R94, 360215R94R, 360215-RN, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 6, Pressure Plate Type: Single Stage, For a New version of this sku use Item #: 130088, (Item #: 204408) $87.50
Pressure Plate Assembly, Remanufactured, 360746-R - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2504, 2544, 2606, Compatible with International Construction and industrial models 3616, Replaces International OEM number 360746-R, 376360R1, 376360R94, 376360R94R, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, (Item #: 204409) $112.00
Pressure Plate, Remanufactured - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Pressure Plate Size: 7", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Type: Single Stage, (Item #: 206065) $115.01
Pressure Plate, Remanufactured - For International / Farmall tractor models 300, 330, 340, 350, 460, 504, 544, 606, 2500, 2504, 2544, 2606, 3514, 3616, 8000, Pressure Plate Size: 10-1/2", Pressure Plate Levers: 3, Pressure Plate Springs: 9, Pressure Plate Hub: 1-11/16", Pressure Plate Spline: 16, Pressure Plate Type: Single Stage, Additional Handling and Oversize Fees Apply To This Item, (Item #: 206066) $122.01
Release Bearing - Clutch release bearings, 3.500 inch outside diameter, 2.375 inch inside diameter, .730 inch wide bore. For tractor models 300, 330, 340, 350, 424, 444, 460 with standard clutch, 504, 606, 2424, 2444, 2504. For 1066, 140, 1466, 1468, 1566, 1568, 2400A, 2500A, 3088, 3288, 3388, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 454, 464, 5088, 5288, 5488, 574, 666, 674, 686, 766, 966, Cub, Cub Lo-Boy, HYDRO 100, HYDRO 70, HYDRO 86. (Item #: 107995, Ref: 59879D) $31.70
TA Clutch Release Sleeve, Used - For International tractor models Super MTA, 300, 300U, 330, 340, 350, 350U, 400, 450, 460, 504, 544, 560, 606, 644, 656, 660, 666, 686, Replaces International OEM nos 359900R1, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430449) $150.01
T.A. Disc - Woven - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 375701R91, Size: 7", Hub: 1-1/2", Spline: 14, Center Solid, Type: Woven, For Metallic Version use Item #: 113817, (Item #: 110867) $45.20
Torque Amplifier Clutch Release Fork, Used - For International tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, Replaces International OEM nos 360653R2, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 496990) $112.01

Cooling System
Fan, 4 Blade - 16.00 inch outside diameter, 1.250 inch pilot hole, 1.937 inch center to center on bolt holes. For tractor models 200, 230, 240, (2404 with C-135 engine), (2444 Lo-Boy with C-153 engine), (330, 340, 404 all with C-135 engine), (444 with C-153 engine). (Item #: 163811, Ref: A173710) $78.00
Fan Belt - This Fan Belt measures 41-7/8 inches length and 0.4 inch width. For 140, 200, 230, 240, 330, 340. Please verify measurements before ordering (Item #: 172941, Ref: 367697R1) $9.40
Heater, Engine Block - This is a Frost Plug Heater with cord. It is 600 watts, 120 volt. Locks securely into engine block. 1-5/8 inch diameter with o-ring seal. Power Cord is about one foot long. Replaces 407046R92. Fits gas engines: C153, C221, C263, C301 and diesel: D188, D166, D236, D282, D361, D236, D282, D301. Tractors: 340, 460, 504, 560, 606, 656, 660, 706, 806, 2504, 2806. Combines: 315, 403, 503 Hillside, 503, 615, 715. (Item #: 120027, Ref: 106725A1) $41.90
Radiator Cap - 7 pound, fits short filler neck. For tractor models 100, 130, 140, 1410, 1412, 1440, 1460, (1640 serial number 44C0034705 and below), (1660 serial number JJC0038346 and below), (1680 serial number JJC0045689 and below), 1822, 1844, 200, 2022, 230, 240, 2400A, 2424, 2444, 2500A, 2504, 2606, 300, 330, 3388, 340, 350, 3588, 3788, 404, 4100, 4156, 4166, 424, 4366, 4386, 444, 450, 4568, 460, 464, 474, 4786, 504, 560, 606, 6388, 656, 6588, 660, 6788, 706, 806, 990, Hydro 84, Super H, Super M, Super MD, Super W4, Super W6, Super W9, Super WD6, Super WD9. (Item #: 112331, Ref: 180224M91) $6.81
Radiator Cap - 7 pound pressure radiator cap. Cap measures 2.328 inches diameter less finger tabs. Inside diameter is 2.215 and 1.970 inches between locking tabs. (** = FOR SHORT FILLER NECK). Fits **Super H, **Super M, MD, **Super W4, **Super W6 and WD6, **Super W9 and WD9, **100, **130, **140, **200, **230, 240, **300, **330, 340, **350, **400, 404, **424, **444, **450, **460, **504, **560, 606, **660, 2424, 2444, 2504, 2606, 4100, 4156, 4166. Replaces OEM 393229R91. (Item #: 112331, Ref: 180224M91) $6.81
Radiator Cap - For International / Farmall tractor models Hydro 70, Hydro 84, Hydro 86, 100, 130, 140 (s/n 13968-later), 200, 230, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 1026, 1206, 1256, 1456, Replaces International OEM number 532029R1, 393229R91, 402281R1, 378289R91, Pressurized, 1.5" Radiator neck I.D., (Item #: 112533) $22.70
Radiator Cap Pressurized - For International / Farmall tractor models 100, 130, 140 (s/n 13967-earlier), 200, 230, 240, 330, 340, 460, 560, 600, 650, 660, Replaces International OEM number 393229R91, 362323R91, 370871R91, 2.050 radiator neck I.D.. Measure radiator neck before ordering, 7 PSI, (Item #: 112332) $11.00
Radiator Hose - Bulk 3 x 1-3/8" - For International / Farmall tractor models H, OS4, Super H, Super W4, W4, 140, 200, 240, 274 (Diesel), 300, 340, 350, 404, 424 (Gas), 444, 2404, 2424 (Gas), 2444, Replaces Case IH OEM number 369092R2, 407002R1, 387721R1, I.D. (A): 1-3/8" (1.375"), O.D.: 1-3/4" (1.750"), Length: 3', For Hose Clamp use Item #: 130453, (Item #: 114083) $20.20
Radiator Hose Upper - Radiator hose, upper, for gas tractors. For model 340. (Item #: 116826, Ref: 369094R1) $35.50
Water Block Drain Plug, Winged - Plug 3/8 inch pipe thread, has "IH" and part number stamped in it, cast iron with zinc plating. For tractor models A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, C, H, HV, Super H, Super HV, I4, I6, ID6, I9, ID9, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA, 04, 0S4, 06, 0S6, ODS6, T6, T340, TD6, T9, TD9, W400, W450, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, 600, 650 (Gas/Diesel), serviceable for Cub, Cub Lo-Boy. (Item #: 178066, Ref: 45314DC) $13.00
No Picture Water Pump - For International / Farmall tractor models 200 (Farmall, 1/54-12/56), 230 (Farmall, 1/56-12/58), 240 (Farmall, 1/58-12/61), 330 (1/57-12/58), 340 (Farmall, Gas, 1/58-12/63), 340 (Utility, Gas, 1/58-12/63), Compatible with International Engine (s) C135 (LP and Gas), Replaces International OEM number 367683, (Item #: 165903) $133.00
Water Pump - With Hub For 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2565, 2606, 2656, 2706, 2756, 2806, 2826, 2856, Hydro 70, Hydro 86 Tractors, 151, 151 Hillside, 181, 205, 303, 315, 403, 453 Hillside, 615, 715 Combines with C221, C263, C291, or C301 Gas Engines or D166, D188, D236, or D282 Diesel Engine. Replaces: 303395R91, 303396R91, 308383R91, 318118R21, 318119R91, 318119R92, 323877R11, 368496R91, 395813R91, 601816C92, 701128C94 (Item #: 107892, Ref: 601816C92) $90.00
Water Pump - This water pump comes with hub and gasket for tractor models 140, (200, 230, IH 240 serial number 65001 and up with C123 engine), (330, 340, 404 with C135 engine), 2400, 2404, 2424, 2444, 4000, 444, all with C123 serial number 65001 and up, C135, C146 or 153 Gas engines. Replaces 367683R91, 375793R91, 367686R91, 367683R91. (Item #: 113376, Ref: 375793R92) $66.00
Water Pump By-Pass Hose - For International / Farmall tractor models 340 (Diesel), 460 (Gas), 504 (Diesel), 560, 606, 660, 706, 806 (all Gas), 2504 (Diesel), Replaces International OEM number 437575C3, 169192R1, 224563R1, 381547R1, 437575C2, 43757C1, ID: .590", OD: .926", Length 6.41", (Item #: 128128) $10.20
Water Pump Gasket - Used on 200, 230, 240, 2404 Indust/Const, 2424 Indust/Const, 2444 Indust/Const, 2504 Indust/Const, 330, 340, 404, 424, 444, 504. Replaces 367687R2 (Item #: 153405, Ref: 367687R2) $3.40
No Picture Water Pump Gasket - Plate to Block - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, T340, TD6, TD9, 3514, 3600, 3616, 3800, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 69676R1, For Reman Water Pump use Item #: 107892, (Item #: 156625) $5.30
Water Pump Hub - Used with water pumps 601816C92, 375742R92, 375793R92. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 330, 340, 404, 460, 504, 560, 606, 660, 706, 806. (Item #: 121936, Ref: 368501R2) $33.90
No Picture Water Pump Pulley, Used - For International tractor models 200 (s/n 65001-later), 230 (s/n 65001-later), 240 (s/n 65001-later), 330, 340, 404, 444, 504, Compatible with International Construction and industrial models 2404, 2444 (Lo-Boy), 2504, Replaces International OEM number 367688R1, Single Groove Pulley, For a new version of this item use Item #: 108755, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435414) $62.01
Water Pump, Remanufactured, 601816C92 - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 460, 504, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 303, 315, 403, 503, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models 3514, 3616, 3850, Compatible with International Hay Cutting (s) 275, 375, Replaces International OEM number 601816C92, 749170C91, Replaces Casting number 169204R1, 303394R2, 318118R2, Includes pump to backplate gasket, Includes backplate, Includes backplate to block gasket, For a New version of this sku use Item #: 156625, (Item #: 204199) $100.01

Decals and Emblems
No Picture Decal Set - Hood only set for 340 Gas. (Item #: R3601) $41.90
No Picture Decal Set - Hood only set for 340 Diesel. (Item #: R3602) $32.22
Grille Emblem - For International / Farmall tractor models Cub (184), Hydro 70, Hydro 86, Hydro 100, Hydro 186, 140, 240, 340, 404, 424, 444, 544, 606, 666, 686, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, 2400A, 2500A, Replaces International OEM number 368523R4, Height:3-3/8", Made of die cast metal, (Item #: 108482) $49.10
Hood Ornament, Chrome - For tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544. (Item #: 108483, Ref: 369180R1) $67.00
Hood Ornament, Used - For International tractor models 200, 230, 240, 330, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544, 2606, 2656, 2706, 2756, 2826, Replaces International OEM number 369180R1, Chrome finish, For a new version of this item use Item #: 108483, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435392) $36.01
IH Decal, 1-5/8", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1 5/8", no background, (Item #: 101024) $2.70
IH Decal, 1", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1", no background, (Item #: 101023) $1.80
IH Decal, 3" x 3-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 3" x 3-1/2", No background, (Item #: 101025) $10.50
IH Decal, 4-1/2" x 5" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 4-1/2" x 5", Mylar decal, (Item #: 101095) $5.30
International Decal, 17", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 17" long, Black, Mylar decal, (Item #: 101105) $5.30
International Decal, 8-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 8 1/2" long, Black, Mylar decal, (Item #: 101104) $3.50
International Decal Set,10" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 10", (Item #: 101022) $27.90
International Decal Set, 1 1/4" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-1/4", (Item #: 101018) $2.70
International Decal Set, 1 3/4"x 1 5/8" IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 1-3/4", (Item #: 101019) $3.50
International Decal Set, 340 Diesel, Mylar - For International / Farmall tractor model 340, Vinyl decal set use Item #: 100953, (Item #: 101082) $36.60
International Decal Set, 340, Mylar - For International / Farmall tractor model 340, Vinyl decal set use Item #: 100952, (Item #: 101081) $33.10
International Decal Set, 340, Vinyl - For International / Farmall tractor model 340, Mylar decal set use Item #: 101081, (Item #: 100952) $36.60
International Decal Set, 340, Vinyl - For International / Farmall tractor model 340, Mylar decal set use Item #: 101082, (Item #: 100953) $40.10
No Picture International Decal Set, 6 1/2"x 7" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo 7", Vinyl Cut, Shaded Outline, (Item #: 101020) $15.70
No Picture International Decal Set, 7 1/4"x 8" Shaded IH Logo, Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo vinyl cut decal 8", (Item #: 101021) $20.90
International Harvester Decal, 2-3/4" x 3" - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, (Item #: 101093) $3.50
International Harvester Decal, 2" x 2-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/2", No background, Mylar decal, (Item #: 101097) $3.50
International Harvester Decal, 2" x 2-1/4", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 2" x 2-1/4", Mylar decal, (Item #: 101092) $3.50
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", Mylar decal, (Item #: 101096) $5.30
International Harvester Decal, 5-1/2" x 6", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH logo 5-1/2" x 6", No background, Mylar decal, (Item #: 101098) $5.30
International Harvester Decal, 5" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 5" diameter, Shaded outline, Mylar decal, (Item #: 101099) $5.30
International Harvester Decal, 6" Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 6" diameter, Shaded outline, Mylar decal, (Item #: 101100) $7.00
International Harvester Decal, 7-1/2", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 7 1/2" diameter, Shaded outline, Mylar decal, (Item #: 101101) $8.80
International Harvester Decal, 9", Mylar - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, IH Logo decal, 9" diameter, Shaded outline, Mylar decal, (Item #: 101102) $10.50
International Hood Decal, 23-1/2", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, Size: 23-1/2", Black lettering, (Item #: 101031) $14.00
McCormick International Decal, 10" Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 10" long, Black and white, Vinyl decal, (Item #: 101103) $8.80
McCormick International Decal, Hood, White/Black, 7-1/4", Vinyl - For International / Farmall tractor models A, B, C, Cub, H, Hydro 70, Hydro 84, Hydro 186, I4, I6, I9, M, O4, O6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, Super W9, W4, W6, W9, 100, 130, 140, 200, 230, 240, 274, 284, 300, 330, 340, 350, 354, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 7-1/4" black and white, Vinyl decal, (Item #: 101026) $7.00

Drive Train
Axle Seal, Rear - For 2-3/4 inch axles (inside diameter 2-3/4 inch, outside diameter 3-5/8 inch). For tractor models 200, 230, 240, 2504, 2544, 2656, 340, 400, 404, 450, 460, 504, 544, 560, 656, 666, Hydro 70, Hydro 86, M, Super M, Super MD, Super MV, Super MDV, Super MTAD, Super MTA. All with 2-3/4 inch axle diameter. Replaces 117567H1, 154935H1, 165651H1, 167175H1, 333750R91, 358780R91, 358819R91, 360457R91, 369319R91, 377788R1, 377788R91, 381042R91, 48776D, 57085D, A27130, AA510R, AA520R, O7041AB (Item #: 172589, Ref: 377788R1) $17.00
Axle Seal, Rear Outer - This outer seal measured 3.250 inches inside diameter, 4.139 inches outside diameter, .555 inches thickness. For tractor models 1026, 1066, 1086, 1206, 1256, 340, 3688HC, 460, 504, 706, 756, 766, 806, 826, 856, 966, 986, Hydro 100, Hydro 186. (Item #: 128501, Ref: 378077R91) $24.60
Clutch Shaft Carrier Seal - This clutch shaft carrier seal measures 1.125 inch inside diameter, 1.565 inch outside diameter, 0.250 inch wide. Fits (340, 460, 504, 656 fits as a clutch shaft carrier seal for forward and reverse transmissions), (544, 606, 665 fits as a forward/reverse transmission seal). Replaces: 350891R91, 358801R91, 358836R91, 370510R91, 371410R91, 515448R91. (Item #: 165141, Ref: 195501M1) $4.70
Gear Shift Boot - Some of the Farmall / International tractors were not factory equipped with a gear shift boot, and it was sold as an extra. This boot is used on models: H, M, 560, I4, I6, ID6, Super MVTA, 2606, HV, MD, T340, T5, MDV, MV, TD6, O4, O6, ODS6, OS4, OS6, Super H, Super HV, Super M, Super MD, Super MDV, Super MTA, Super MTA, Super MV, Super W4, Super W6, Super WD6, W4, W6, WD6, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 606, 660, B275, 354, 384. It measures 4-3/4 inches tall, 11/16 inch top hole inside diameter and 2-3/4 inches bottom hole. (Item #: 182890, Ref: 64603DA) $24.80
Gear Shift Knob - For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MTA, W4, W6, WD6, Super W6, W9, WD9, Super WD9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 450, 424, 460, 504, 560, 600, 606, 660, and on the hydraulic lever control on the 454 and 574. Gear shift lever knob. Replaces 3121549R1, IHS266. (Item #: 109514, Ref: 53717DA) $5.80
Oil Seal - Oil seal for bearing kit 372440R91. For tractor models 140, 240, 330, 340, F504, dual wheel. (Item #: 172864, Ref: 372440R91) $10.90
PTO Disc - For International / Farmall tractor models 330, 340, 460, 504, 560, 606, 660, 2504, 2606, Compatible with International Construction and industrial models 2504, Replaces International OEM number 376825R91, 374032R91, ID: 3-3/4" (95mm), OD: 6-7/16" (163mm), 12 Teeth, (Item #: 153769) $41.40
Ramp Assembly, Bearing Carrier and Overrunning Clutch - This Remanufactured Bearing Carrier and Overrun Ramp Assembly is for tractor models 2504, 2544, 2606, 2656, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686. Additional $25 core charge will be added to your order. (Item #: 204412, Ref: 365402R11) $142.01
Seal, Rear Axle - One 2-1/2 inch diameter seal. For tractor models 300, 330, 340, 350, 460, H, HV, Super H, Super HV. Inside diameter 2.500 inches, outside diameter 3.548 inches, width 0.438 inches. Replaces 358770R91, 360251R91, 377786R1, 377786R92, 43722D. (Item #: 151917, Ref: 377786R1) $15.00
Shift Lever Repair Pin Kit - For International / Farmall tractor models B250, B275, B276, B414, H, HV, I4, I6, I9, M, MD, MTA, O4, O6, OS6, Super H, Super HV, Super M, Super MTA, Super W6, W4, W6, W400, W450, WD6, WD9, 300, 330, 340, 350, 354, 364, 384, 400, 424, 434, 444, 450, 460, 504, 560, 606, 660, 2300, Replaces International OEM number 256918R1, 172529, 256919R1, 259918R11, 310662R11, 310664R11, 34878D, 357003R1, 40465DA, 40466DA, 705650R1, (Item #: 167881) $25.00
Torque Ampilifer Carrier - For International / Farmall tractor models Super MTA (s/n 60001-later), 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 361281R13, Includes pre-installed inner bearings, For a Remanufactured version of this sku use Item #: 204411, (Item #: 151955) $275.00
Torque Amplifier Clutch Carrier Nut - For International / Farmall tractor models Super MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359897, 35897N, (Item #: 111552) $41.00
Torque Amplifier Gasket Set - For tractor models 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686. (Item #: 115574, Ref: 395915) $87.00
Torque Amplifier Primary Sun Gear without Bearing - 23 tooth. For tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, (Super MTA serial number 60001 and up). (Item #: 113413, Ref: 361283R32) $188.00

Electrical System
Coil, Original, 12 Volt - OEM style coil. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. This is an International Harvester OEM style 12 volt distributor coil. This distributor coil has a 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. (Item #: 154651, Ref: 353875R91) $65.00
Coil, Original, 6 Volt - OEM style coil. Measures overall length of 5 3/8 inches, Diameter at widest point of center ridge is 2 1/4 inches. This distributor coil has a 1.4 ohm rating between the two primary winding terminals. For tractor models 100, A, Super A, B, C, Super C, H, Super H, M, Super M, Super MTA, MD, W4, W6, Super W4, Super W6, Super W6TA, W9, Super W9, Cub, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450. (Item #: 154650, Ref: 353874R91) $65.00
Distributor - Original IHC design comes with a 32 tooth drive gear. For tractor models Super W6TA, Super W9, Super WD6, Super WD6-TA, Super WD9, Super WDR9, W4, W400, W450, W6, W9, WD6, WD9, WDR9, WR9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 504, 600, 650, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 3514. R6332. MHSK1 (Item #: 124839, Ref: 107304C91) $115.00
Distributor - New and complete distributor comes with a 32 tooth gear, and is for tractor models: A, AV, B, BN, C, H, HV, M, MV, Super A, Super AV, Super C, Super H, Super M, Super MTA and other IH equipment with International Distributors. Replaces: 107296C91, 107299C91, 107302C91, 107304C91, 353890R91, Distributor Housing Casting Number: 353898R11, 354900R91, 357935R91, 362473R91, 362722R91, 364653R91, 364696R92, 366928R91, 372712R91, 380622R91. Uses IH points (included). (Item #: 124839, Ref: 107304C91) $115.00
Distributor Assembly Less Base, Used - For International tractor models A, B, C, Cub, H, M, Super C, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, Replaces International OEM number 107304C91, 07298C91, 357935R91, 366928R91, 381687R91, Without tachometer drive and with base, For a new version of this item use Item #: 203588, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 403588) $176.01
Distributor Breaker Plate - Used on International Distributors, this plate is where points are secured. Points not included. Four Cylinder Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Replaces 352277R11 (Item #: 190142, Ref: 352277R11) $24.50
Distributor Cap - 2-3/16 inches high, fits 4 cylinder. Models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 504, A, AV, B, BN, C, Cub, 154 Lo-Boy, Cub 185 Lo-Boy, H, M, MD, Super A, Super M, Super C, Super H, Super HV, M, MV, MD, Super M. (All with IH Distributor, not for Delco Distributor). Will also fit J4 magneto. (Item #: 105571, Ref: 351693R92) $9.10
Distributor Cap Spring Clip - Fits listed IH models when equipped with IH brand distributor 353898R11. Replaces: 107384C1, 353894R1 (Item #: 178117, Ref: 353894R1) $18.40
Distributor Condenser - Services IH distributors 1951 to 1962 also services J4 magnetos. For tractor models 200, 230, 240, 2404, 2504, 2606, 2706, 2806, 300, 330, 340, 350, 400, 404, 450, 460, 504, 560, 606, 660, 706, 806, A, B, C, Cub, Cub 154, Cub 185 Lo-Boy, Cub Lo-Boy, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA. (Item #: 111108, Ref: 353903R1) $6.60
Distributor Drive Housing - This is a new distributor drive housing with an opening for tachometer drive. It is used to change from a magneto to a distributor or to add a tachometer drive to your tractor. The tachometer drive parts (tachometer drive assembly part number 369695R1, tachometer cable connector housing part number 369692R1 and 363817R1, connection housing plate) or tach. Drive blockoff plate are sold separately. NOTE: Will also work on tractors without tach drive by ordering number 363764R1 block off plate. Use with 107304C91 distributor when replacing a magneto. fits tractor models A, A1, AV, AV-1, B, BN, C, Cub, Cub Lo-Boy, H, HV, I4, I6, I9, M, MTA, MV, O4, O6, OS4, OS6, Super A, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W9, W4, W6, W6TA, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 2504, 300, 330, 340, 3444, 350, 3514, 404, 424, 444, 504, 400, 600, 650 450. Replaces: 363749R91, 363763R11. (Item #: 178938, Ref: 363749R91) $107.00
Distributor Drive Housing, Used - For International tractor models C, M, MD, MTA, Super A, Super C, 200, 230, 240, 300, 330, 340, 350, 400, 424, 450, 504, 2404, 2424, 2504, Replaces International OEM number 363763R11, With Tachometer Drive Hole, For a new version of this item use Item #: 178938, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 429775) $65.01
Distributor Drive Shaft - Shaft for the Distributor Drive. For Cub, Cub Lo-Boy, A, Super A, Super AV, B, C, Super C, H, HV, Super H, Super HV, M, MD, Super M, Super MD, 06, OS6, W6, WD6, W9, WD9, WR9, WDR9, WR9S, 200, 330, 340, 350, 400, W400, 404, 450, W450, 504. Distributor Shaft, for battery ignition with original IH distributor. (Item #: 110682, Ref: 353934R11) $18.00
Distributor Dust Cover - Used with horizontal IHC distributor 353898R11 or J4 magneto on Models: A, AV, Super A, Super AV1, B, BN, C, Super C, Cub, Cub Lo-Boy, H, HV, Super H, Super HV, M, MV, MD, MDV, Super M, Super MD, Super MTA, W4, W6, W9, WR9, WR9S, WDR9, O4, O6, OS6, ODS6, I4, I6, ID6, I9, ID9, T6, TD6, TD9, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404. Replaces 384831R91. (Item #: 107074, Ref: 353900R11) $16.10
Distributor Gear - This Distributor Gear has 32 teeth. It is used on IH Distributor 353898R11. Replaces original part numbers 353902R1, 531461R91 (Item #: 111179, Ref: 353902R1) $30.00
Distributor Hold Down Clamp - For 5/16 inch hold down bolt and IH built distributor. 2 used per engine, sold individually. Fits fits tractor models A, AV, B, BN, C, Cub, Cub Lo-Boy, H, HV, Hydro 70, Hydro 86, I4, I6, I9, ID6, ID9, M, MV, O4, O6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super MVTA, Super W4, Super W6, Super W6TA, Super W9, W4, W6, W9, WR9S, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2400A, 2400B, 2404, 2405B, 2410B, 2412B, 2424, 2444, 2500A, 2500B, 2504, 2505B, 2510B, 2514B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 560, 574, 600, 606, 650, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856. All with IH distributors. Replaces 341139R1, 353937R1. (Item #: 182464, Ref: 341139R1) $9.60
Distributor Rotor - For IH Distributors on models: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 110266, Ref: 353896R1) $4.00
Distributor Shaft Bushing and Shim Kit - International Distributor Shaft Bushing and Shim Kit. Fits tractor models A, A1, AV, AV1, B, BN, C, Cub, Cub Lo-Boy, H, HV, M, MTA, MTAV, MV, O4, O6, ODS6, OS4, OS6, Super A, Super A-1, Super AV, Super AV-1, Super C, Super H, Super HV, Super M, Super MTA, Super MV, Super W4, Super W6, 100, 130, 140, 154, 184, 185, 200, 230, 240, 2404, 2424, 2444, 300, 330, 340, 3444, 350, 3514, 400, 404, 424, 444, 450, 504, 600, 650. Replaces: 252739R1, 352298R1, 353899R1, 353921R1, 373577R91, 86637641. This is a 5-piece kit. The length is 2.006 inches. (Item #: 178766, Ref: IHS3166) $44.00
Distributor Tach Drive Housing Block Off Plate - This new Distributor Tachometer Drive Housing Block Off Plate with Gasket is used with part number 363749R91 when a Tachometer is not used. Fits tractor models Cub, Cub Lo-Boy, 130, 140, 230, 240, 2404, 300, 330, 400, 404, 450, 600, 650, 2424, 2444, 340, 424, 444, 2504, 350, 504. Replaces 363764R1, 363765R1. (Item #: 150708, Ref: 363764R1) $9.80
Distributor with base and tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, M, Super A, Super C, Super H, Super M, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2424, 2504, With tachometer drive and with base, Includes new distributor cap, points, condenser, 6V coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203589) $696.01
Distributor with base less tach drive, Remanufactured - For International / Farmall tractor models A, B, C, Cub, H, HV, I4, I6, M, MTA, O4, O6, OS4, OS6, Super A, Super C, Super H, Super M, Super MTA, Super W4, Super W6, W4, W6, W9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 504, 600, 650, 2404, 2424, 2444, 2504, 3444, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models T6, T340, 500, Without tachometer drive and with base, Includes new distributor cap, points, condenser, 6V Coil, and all other parts needed for a thorough rebuilt unit, (Item #: 203588) $434.01
Electronic Ignition Conversion Kit - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 6 volt POSITIVE ground system only. Use with distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650 (Item #: 105084, Ref: 1442P6) $157.00
Electronic Ignition Conversion Kit - 12V Negative Ground - Pertronix Electronic Ignition Module Replaces Points and Condenser. Use on tractors with 12 volt NEGATIVE ground system only. Use with IH distributor 353898R1 or 357935R91 on: Cub, Cub Lo-Boy, Cub 154 Lo-Boy, 184, Cub 185 Lo-Boy, A, AV, Super A, Super AV, BN, C, Super C, H, HV, Super H, Super HV, M, MV, Super M, Super MTA, Super MD, Super MDV, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 454, 504, 600, 650. Verify distributor number before ordering. (Item #: 105083, Ref: 1442) $157.00
F4 Magneto Tune-Up Kit - For International / Farmall tractor models A, B, C, H, HV, M, MD, Super A, Super C, Super H, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 450, Contains points and condenser to service F4 magneto, (Item #: 112535) $29.26
Generator - 6 volt, 35 amp. For tractor models 330 gas, 340 gas, 140 serial number 26800 and below, Cub Lo-Boy serial number 16398-18700, Cub serial number 221293-224400, 240. Refundable $25.00 core charge will be added to orders. Replaces 1100052, 1100055, 368652R92. (Item #: 178426, Ref: TG-72) $358.00
Glow Plug - Sold individually. 0.197 inch tip diameter, 5 inch overall length and 0.311 inch outside diameter where it slides into the head. For combines: 101, 151, 181, 315, 403, 453, 503, 715. For Tractors TD6, TD9, 340, 460, 504, 560, 606, 656, 660, 706, 3514, 3616, 3800, 3850, TD340. Replaces 304131R1, 343977R1, 343894R1, 304131R3, 304131R2. (Item #: 111187, Ref: 304131R3) $16.50
Glow Plug Meter Gauge - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2606, 2656, 2706, Compatible with International Combine (s) 101, 151, 181, 403, 453, 503, 615, 715, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD340, 2500, 2504, 3514, 3616, Replaces International OEM number 370380R91, 370380R92, 378352R91, 404740R1, (Item #: 121659) $45.20
Key Switch, 2 Terminal - With keys. For tractor models (Cub serial number 224401 to 239826 with battery ignition), (Cub Lo-Boy from serial number 18701 and up with battery ignition), Cub Cadet 100, 100, (140 serial number 26801 to 45000), 240, 330, 340, 350, 404, 2404, 424, 2424, 444, 2444, 450, W450, 460, 504, 544, 560, 606, 650, 656, 600, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70, Hydro 86, Hydro 100. Replaces 370375R91, 379594R92, 403562R2. (Item #: 113393, Ref: 366313R91) $13.70
Magneto Coil Cover - For tractor models 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105661, Ref: 47449DAY) $30.01
Magneto Distributor Cap, H4 Magneto - For H-4 MAGNETO ignition on Models: 100, 200, 230, 240, 300, 330, 340, 350, 400, 450, A, B, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA. (Item #: 105662, Ref: 47413DYC) $17.70
Magneto Tune-up Kit For H4 - Magneto Tune-up Kit For H4 Magneto used on: 100, 130, 200, 230, 240, 300, 330, 340, 350, 400, 450, W4, W6, A, B, BN, C, H, HV, M, MD, Super A, Super A1, Super C, Super H, Super HV, Super M, Super MTA, W4, W6. Includes condenser, points, rotor. (Item #: 105297, Ref: 21A10R) $22.20
Spark Plug - Spark Plug 18MM Thread Diameter for: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154-Lo-boy, Cub 185-Lo-boy. Replaces OEM number 360942R1. Also replaces Autolite AL386, AL388, AL3116 and Champion D16, 516, D10, D14, D16J, D21, D89D, K13, K15J, M14, RD14, RD16, UD16 plugs (Item #: 111742, Ref: AL386) $3.20
Spark Plug Wire Set, Custom - IH or Delco Distributors and Magnetos. For the following models with 90 degree angle boots: A, I4, AV, Super A, Super A1, Super AV, SuperAV1, B, BN, C, Super C, Cub, Cub Lo-Boy, 154, 184, 185, H, HV, Super H, Super HV, M, MD, Super M, Super MD, Super MDV, MDV, Super MDVTA, MTA, Super MTA, MV, Super MV, Super MVTA, O4, O6, ODS6, OS4, OS6, T340, T5, T6, TD6, SuperW4, W4, Super W6, Super W6TA, W6, W6TA, Super WD6, WD6, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, W400, 404, 424, 444, 450, W450, 504. Replaces the following OEMS: 352947R91, 352951R91, 352954R91, 352956R91, 356687R92, 356689R92, 356691R91, 356694R92, 356695R92, 356697R93, 362439R91, 362789R91, 407487R1, 45327DA, 46277DA, 50075D, 52794D, 65352D, 65357D, 65358D, and 65359D. (Item #: 120100, Ref: S.67475) $17.50
No Picture Starter - Delco Replaces OEM 1107543, 1107564, 1108657. TYPE: DR 20MT, 9 teeth, CCW rotation, volt/KW: 12. NOTE :C-221 Gas/LPG, LPG Engine (YR.59-58). Fits these models: 340 DSL (1962-63), 350 DSL (1956-58), 350 DSL (1957), 3514 DSL (1965-66), 3616 DSL (1965-66), 460 DSL (1958-59), 460 DSL (1962-64), 460 GAS, LPG, (1960-61), 460 GAS, LPG, (1960-64), 460 GAS with LPG, (1958-59), 460HC GAS, LPG, (1960-64), 504 DSL (1961-66), 560 GAS with LPG, (1958), 560 GAS with LPG, (1958-64), 560HC GAS with LPG, (1958-64), 606 DSL (1961-66), 606 GAS, LPG, (1961-64), 656 GAS, LPG, (1965-66), 660 GAS, LPG, (1960-61), 660 GAS with LPG (1958-59), T340 (1960-62), TD340 (1962-64), TD340 (1967), 560 GAS with LPG, (1959-64). Refundable $55.00 core charge will be added to your order. (Item #: 203447, Ref: TS-1032) $381.10
Starter - Delco Style (4155), Remanufactured, Delco Remy, 1107169, 368899R91 - For International / Farmall tractor models 330, 340, Compatible with International Construction and industrial models T340, Replaces International OEM number 368899R91, 108013A2R, Replaces Delco Remy manufacturer number 1107169, 1108097, Replaces manufacturer number 4155, 140-043, Delco Style, Voltage: 6, Rotation: Counter Clockwise, Teeth: 10, (Item #: 203440) $523.60
Starter Drive - This Starter drive fits gas engines for the following models: A, B, C, H, M, Super A, Super C, Super H, W4, W6, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450 Replaces OEM# 1107021, 1107412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 1107408, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. (Item #: 107059, Ref: 565549) $34.00
Starter Drive Housing - This Starter Nose Cone is used on Delco starter numbers 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096. Bushing is included. This part replaces Delco part numbers 1878661, 1887109, 1910093, 1943759 (Item #: 179382, Ref: 1878661) $75.01
Starter Drive, Improved Style - This improved style starter drive is a positive ratchet style. For A, B, C, H, M, Super M, 100, 130, 140, 300, 330, 340, 350, 200, 240, 400, 450, Super A, Super C, W4, W6 all using the following starters 1107021, 2207412, 1107606, 1107427, 1107174, 1107067, 1107444, 1107093, 1107448, 1108097, 11074808, 1108098, 1107886, 1108093, 1108080, 1108038, 1108041, 1108012, 1108173, 1108016, 1108174, 1108185. Ten tooth drive, counter clockwise rotation, Barrel Folo rubber cushion drive design, 15.9mm inside diameter, 39.6mm gear diameter, 95-109mm. (Item #: 112575, Ref: 565549-New) $37.30
Starter Drive Parts - Complete unit available as 356037R91 (Item #: 178541, Ref: SPD12) $130.00
Starter Drive Spring - Spring, main drive, for starter 77695H. Tractors:Super A, C, Super C, H, M, Super M, 4, W4, 6, W6, Super W6, 100, 130, 140, 300, 330, 340, 350. For 100, 130, 140, 300, 330, 340, 350, 4, 6, C, M, Super C, Super M, Super A, W4, W6 (Item #: 111718, Ref: 1860639) $31.80
Starter Nose Cone - This cast nose cone is used with starters that have saddle mount solenoids. Solenoid mount is not cast into this part. Bushing Included. Multi drilled and tapped for multiple applications. Used on Delco: 1107169, 1107358, 1107402, 1107407, 1107413, 1107414, 1107424, 1107434, 1107437, 1107439, 1107440, 1107443, 1107456, 1107458, 1107459, 1107542, 1107663, 1107682, 1107806, 1107813, 1107831, 1107958, 1107967, 1107976, 1108006, 1108009, 1108012, 1108038, 1108041, 1108060, 1108090, 1108621, 1108092, 1108103, 1108130, 1108142, 1108159, 1108165, 1109380, 1813397. Replaces Delco part numbers: 1813396, 1872960, 1874785, 1879052, 1914976, 1924299, 1924468, 1930639, 1935587, 1938304, 1959334, 1959773, 1963665 (Item #: 189672) $62.00
Starter Solenoid - Starter solenoid for 6 volt starters A, B, C, Super A, Super C, 100, 140, 200, 230, 240, 300, 340, 350, 400. All 1952-1961 with C113 or C123 gas engines using starter switch mounted to the starter. Replaces 25A266, DR1465. (Item #: 105670, Ref: 142364HA) $22.90
Starter Switch - Momentary Push Button Ignition Switch. Rubber boot covers push button, 2 screw type terminals, used extensively on I.H. equipment. Serves as starting, horn or reverse lock out switch. Used on various combines, windrowers, balers, cotton pickers, hay conditioners and grain platforms. Also used on Tractors: IHC: Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 4100, 4156, 4166, 4186; Industrial: 1206, 2656; Crawler: T4, T5, TD5. Replaces 366317R91, 366317R93GV (Item #: 112232, Ref: 366317R93) $7.40
Starting Button - Attaches with eyelets and screws. For tractor models 240, 300, 330, 340, 350, 400, 404, 424, 444, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186. (Item #: 112232, Ref: A36948) $7.40
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $13.40
Switch, Push Button - This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: 271179R91, 367678R91, 373611R91, 393209R91. (Item #: 121141, Ref: R7994) $13.40
Tune-up Kit - This Tune-up Kit is for IH Distributors - NOT Delco. Complete Kit For: 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 4, 400, 404, 424, 444, 450, 6, A, AV, B, BN, C, H, HV, M, Super AV, Super C, Super H, Super HV, Super M, Super MTA, Super W4, Super W6, Super W6TA, Super A, Cub, Cub Lo-boy, Cub 154 Lo-Boy, Cub 185 Lo-Boy. All with 4 cylinder gas engines and IH distributor from 1951 through 1962. Contains: Points, Autolite Spark Plugs (AL386), Condenser, rotor. NOT FOR USE ON EARLY MODELS WITH A MAGNETO. (Item #: 111814, Ref: IHTK1) $29.40
Tune-up Kit - Ignition TUNE UP KIT For Cub 1963 and Later with IH Distributor, 140, 340, 454, 504. Includes the Rotor, Point and Condenser (ATK9BIR Kit) Plus Spark plugs of 18mm, 1/2 inch reach, 7/8 inch hex. Verify correct spark plug size and type (Item #: 160863, Ref: IHTK2) $36.97
Tune-up Kit - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Cub 154, Cub 185, H, HV, M, MD, Super A, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 560, Thread: 18 mm, (Item #: 181488) $39.10
Tune-up Kit, Basic - Kit contains: rotor, condenser, points and proper point gap gauge. For tractor models Cub, Cub Lo-Boy, 140, 340, Hydro 70, Hydro 86, 460, 560, 606, 660, 666, 686, 706, 756, 766, 806, 826, 856, 2606, 2706, 2756, 2806, 2826, 2856. All with 4 or 6 cylinder gas engines and battery ignition, 1963 and later with IH distributor (not for Prestolite). YTO-ATK9BIR (Item #: 105296, Ref: ATK9BIR) $19.70
Tune-up Kit, Basic - This basic tune-up kit is for 4 cylinder gas engines with battery ignition from 1951 thru 1962 with IH distributor (NOT for Prestolite), kit contains rotor, condenser, points, and proper point gap guage. For tractor models 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 444, 450, A, B, C, Cub 1962 and earlier, H, M, Super A, Super C, Super H, Super M, Super MTA, W4, W6. (Item #: 105572, Ref: ATK5BIR) $12.00
Voltage Regulator, 6 Volt, Positive Ground - REPLACES 121578C1, Delco 1118308, 1118780 and 1119575. Fits tractor models: 100, 130, 140, 200, 330, 340, Cub, Cub Lo-Boy, Super A, Super C, H, M, MTA. This external voltage regulator has a flat base for mounting. There are 4 terminals (lights, battery, field and generator). Designed for A type circuits in positive ground systems with 2 brush generators Measures 7 to 9 output amps. (Item #: 105516, Ref: GDR6003) $29.00

Engine Bearings
Camshaft Bearing Set - For International / Farmall tractor models 340, 504, 2504, 3514, Compatible with International Engine (s) D166, D188, Replaces International OEM number 70259R2, 70260R1, 70261R2, Sold as complete set, (Item #: 106667) $44.30
Connecting Rod Bearing - .020" Oversize - Journal - For International / Farmall tractor models 330, 340, Compatible with International Engine (s) C135 (gas, s/n 100, 500 - earlier), Replaces International OEM number 376648R11, Sold per journal, Bearing Size: .020" Oversize, For Standard connecting rod bearing use Item #: 106452, (Item #: 106451) $46.20
Connecting Rod Bearing - Standard - Journal - For International / Farmall tractor models 330, 340, Compatible with International Construction and industrial models T340, TC5, 500, Compatible with International Engine (s) C135 (gas, s/n 100, 500 - earlier), Compatible with International Hay Cutting (s) 201, Replaces International OEM number 367777R11, Sold per journal, Bearing Size: Standard, For .010" connecting rod bearing use Item #: 106452, (Item #: 106449) $23.50
No Picture IPTO Bearing Cage O-Ring - For International / Farmall tractor models 330, 340, 460, 504, 544, 606, 656, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 252556, (Item #: 176724) $7.10
No Picture Main Bearing Kit, .010 - For tractor models 330 and 340. (C135 CID 4-cylinder Gas). For tractors with stepped head pistons. (Item #: MBK135-010) $113.60
Main Bearings - .010" Oversize - Set - For International / Farmall tractor models 340, 504, 2504, 3514, Compatible with International Engine (s) D166, D188, Replaces International OEM number 376670R91, 376673R91, 376676R91, Sold in complete set, Bearing Size: .010" Oversize, For Standard main bearing use Item #: 106606, (Item #: 106605) $93.00
Main Bearings - .020" Oversize - Set - For International / Farmall tractor models 340, 504, 2504, 3514, Compatible with International Engine (s) D166, D188, Replaces International OEM number 376686R91, 376683R91, 376689R91, Sold in complete set, Bearing Size: .020" Oversize, For Standard main bearing use Item #: 106605, (Item #: 106606) $116.00
No Picture Main Bearing Set - .010 - For 330, 340, 404 with C135 Engine. (to engine serial number 100500 - main journal would measure 2.244 inch standard size). (Item #: 106585, Ref: MS-505P-010) $159.00
No Picture Main Bearing Set - .020 - For 330, 340, 404 with C135 Engine (to engine serial number 100500 - main journal would measure 2.244 inch standard size). (Item #: 106586, Ref: MS-505P-020) $239.00
No Picture Main Bearing Set .030 - For 330, 340, 404 with C135 Engine (from engine serial number 100501 - main journal would measure 2.624 inch standard size), 424, 444, 504 with C146 or C153 4 cylinder gas engines. (Item #: 106591, Ref: MS-665P-030) $163.00
No Picture Main Bearing. Set .030" Oversize - For International / Farmall tractor models 340, 504, 2500, 2504, 3514, Compatible with International Construction and industrial models TD340 (Crawler), Compatible with International Engine (s) D166 (Diesel), D188 (Diesel), Replaces International OEM number RP92730, (Item #: 167239) $33.50
No Picture Main Bearing Set - .STD - For 330, 340, 404 with C135 Engine (to engine serial number 100500 - main journal would measure 2.244 inch standard size). (Item #: 106584, Ref: MS-505P-STD) $220.00
No Picture Rod Bearing - Single bearing in standard. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Standard journal measures 2.060 inches. Replaces 375723R11, 7375723, and CB-533P. Sold individually. (Item #: 106453) $18.20
No Picture Rod Bearing - Single bearing in .010. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Journal measures 2.050 inches. Replaces 376656R11, 7376656, and CB-533P-010. Sold individually. (Item #: 106454) $23.40
No Picture Rod Bearing - Single bearing in 0.20. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Journal measures 2.040 inches. Replaces 376658R11, 7376658, and CB-533P-020. Sold individually. (Item #: 106455) $23.00
No Picture Rod Bearing - Single bearing in 0.030. For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. For tractor models 330, 340, 404 all with C135 engine serial number 100501 and up. 424, 444, 454, 504, 454, 2400A, 2400B, 2405B, 2410B, 2412B with C146 or C153 4-cylinder gas engines. Journal measures 2.030 inches. Replaces 375724R11, 7375724, and CB-533P-030. Sold individually. (Item #: 106456) $7.50
Transmission Shift Pattern Plate - For International / Farmall tractor models 340, 460, 504, 560, 606, 660, 2504, 2606, Replaces International OEM number 371371R1, (Item #: 126759) $30.50

Engine Gaskets
No Picture Conversion Gasket Set - For tractor models 330, 340, 404 with C135 engine serial number 100501 and up. 424, 444, 504 with C146 or C153 4 cylinder gas engines. (Item #: 106722, Ref: CS3287VC) $85.00
Crank Seal, Front - For tractor models 100, 130, 140, 200, 22, 230, 240, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 swrial number <22113, U-2A serial number <22113. (Item #: 172671, Ref: 389407R92) $9.30
No Picture Crank Seal, Rear - Fits, 100, 130, 140, 200, 22, 230, 330 serial number <100500, 340 serial number <100500, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super A serial number 255418-310299, Super A serial number 310300>, Super AV, Super AV serial number 255418-310299, Super AV serial number 310300>, Super C, U-2 serial number <22113, U-2A serial number <22113. (Item #: 106651, Ref: 24425D) $19.00
Front Crankshaft Seal - This front crankshaft seal has a 2.375 inch Inside Diameter, a 3.355 inch Outside Diameter and is 0.475 inch wide. It Fits: 2400, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 4500B, 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856 (Gas and LP), 340, 504 (Diesel), 350 (W/ GD193 Diesel), 3514 (Diesel, with D188 engine), 3616, 460, 560, 606, 656, 660 (Gas, LP and Diesel, when used as a front crankshaft seal), 706 (Gas, LP and Diesel, when used as a front crankshaft seal, except German Diesel), Hydro 70, Hydro 86 (Gas and LP). Replaces: 117568H1, 119020H1, 129370H1, 273573R91, 317549R91, 357672R91, 391976R91, 606750C91 (Item #: 106642, Ref: 834831M1) $12.00
Front Crankshaft Seal - For International / Farmall tractor models A, B, C, Cub, Cub Lo-Boy, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C60 (Gas and LP), C113 (Gas and LP), C123 (Gas and LP), C135 (Gas and LP), C146 (Gas and LP), C153 (Gas and LP), Replaces International OEM number 379620R92, 378193R91, 350708R1, 355769R1, 46179DC, (Item #: 106638) $14.10
No Picture Full Gasket Set - For 330, 340, 404 with C135 Engine (To ES#100500) (Item #: 106716, Ref: FS3150) $94.00
No Picture Full Gasket Set - For tractor models 340, 504, 2504, 3514 with D166 or D188 Diesel Engine. (Item #: 106720, Ref: FS3396) $283.00
Gasket, Manifold, Pack of 2 - Used with 251175R1 Manifold. Fits Models: A, B, C, Super C, Super AV, AV, BN, T340, T5, Super A, 100, 130, 140, 200, 240, 330, 340, 404, 424, 444, A1, T4B, AI, All with 113, 123, 135, 146 and 153 CID Gas, LP or Distallate engines. Price is for two. Replaces 24520D, 24520DA, 352014R1, 48696D, 48696DA (Item #: 101551, Ref: 352014R1) $11.80
Head Gasket - For International / Farmall tractor models C, Super A (Farmall, 1/47-12/53), Super A (V, Farmall, 1/47-12/53), Super A (1, Farmall, 1/54-12/55), Super A (V1, Farmall, 1/54-12/55), Super C (Farmall, 1/51-12/53), 100, 130, 140, 200, 230, 240, 330, 340, Compatible with International Construction and industrial models T340, TC5, 500, Compatible with International Engine (s) C113 (with water pump conversion), C123, C135 (s/n 100500-earlier), Compatible with International Hay Cutting (s) 201, Replaces International OEM number 356313R1, 366300R3, 366300R2, This head gasket is used on applications with a water pump, For 9 Stud Cylinder Head, For Applications Without Water Pump use Item #: 168314, (Item #: 160771, Ref: 356313R2) $42.40
Head Gasket Kit - Upper gasket set with head gasket. For C123 CID gas 4 cylinder engine on tractors: Super A-1 and AV-1 serial number 310300 and up, Super C~ 100 and 200. For 400, 450, M, MD, MDV, MV, Super M, Super MD, Super MTA, Super W6, Super WD6, W400, W450, W6TA. (Item #: 106677, Ref: 357476R95) $72.00
No Picture Head Gasket Set - For tractor models 340, 504, 2504, 3514 with D166 or D188 Diesel Engine. (Item #: 106687, Ref: HS3396) $195.00
No Picture Manifold Gasket - For International / Farmall tractor models B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2500, 2504, 3514, Compatible with International Combine (s) 105, 203, Compatible with International Construction and industrial models 500, Replaces International OEM number 352014R4, (Item #: 167139) $7.30
Oil Pan Gasket - For 140, 130, 100, 140, 300, 22, 230, 240, 330, 340, 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, SUPVER AV, Super C, - ALL WITH C113 OR C123 ENGINES. (Item #: 106698, Ref: 43458DB) $8.10
No Picture Oil Pan Gasket Set - This is a complete set to reinstall the oil pan. For tractor models 2504, 340, 3514, 504. All with D166 or D188 4-cylinder diesel engines. (Item #: 106703, Ref: OS30769) $33.30
Oil Seal - For International / Farmall tractor models Super C, 200, 240, 330, 340, 404, Replaces International OEM number 359790R91, 104436H1, 104705H1, 104705H2, 378157R91, 380921R91, 380922R91, 542515R91, 75260H, (Item #: 164792) $18.70
Overhaul Gasket Set - For Super A1 and AV1 (serial number 310300 and up), Super C, 100, 130, 140, 230, 240, 330, 340 using C123 or C135 gas engines. Includes all gaskets including crankshaft seals. (Item #: 106716, Ref: GK7640S) $94.00
Rear Crankshaft Seal Kit - Fits tractor models A, AV, B, BN, C, F12, F14, I12, I14, O12, O14, W12, W14 (2-piece rear felt seal ONLY fits as a rear crankshaft seal), Super A, Super A-1, Super AV, Super AV-1, Super C 340 (gas, up to engine serial number 100500), 100, 130, 140, 200, 230, 240, 330. Replacement part number and kit contents: (2) 24425D, 24425DA felt seals, (2) 43447D, 43447DA seal retainer center gaskets, (1) 43448D seal retainer to block gasket, (4) 43445D seal plate felt plugs, and (4) 43446D, 43446DA seal retainer plate gaskets. (Item #: 182488, Ref: IHS2416) $21.50
Rear Crankshaft Seal Kit - Fits: (Hydro 70, Hydro 86, 2544, 2756, 2806, 2826, 2856, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856 all gas, LP), (2504, 340, 504 all diesel (no German diesels), (2606, 2656, 2706, 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesels), Constructall, Industrial: 2500 (diesel (no German diesels), (Industrial: 100C, 2400, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62 all gas, LP), (150, H25B, H50A, H50B, H50C, TD6-62, TD9B all diesel (no German diesels), (3514, 3616, 3800, 3850, H30B all gas, LP, diesel (no German diesels). Fits following engines/power units: C-157, C-175, C-200, C-221, C-263, C-282, C-291, C-301, D-188, D-236, D-282, D-301. 4.568 inch outside diameter, 4.000 inch inside diameter, 0.375 inch wide, set includes: 1 piece lip seal, rear seal housing gasket, and 2 plugs. Replaces: 308406R1, 368568R1, 374006R91, 393180R91, 403066R91, 538983R1. (Item #: 106656, Ref: IHS2411) $21.30
Seal, Crankshaft, Front with wear sleeve - Front Crankshaft Seal. For 100, 130, 140, 200, 230, 240, 330, 340, Super A-1, Super AV-1, Super C, Cub serial number <261717, Cub Lo-Boy serial number <261717. (Item #: 178053, Ref: 378193R91) $37.10
Valve Cover Gasket - This Valve Cover Gasket is used on Gas Engines; C113, C123, C135, C146, C153. It replaces OEM/Original part numbers 43378DB, 43378DD, 43378DE. (Item #: 128613, Ref: 43378DE) $10.60
No Picture Valve Cover Gasket - For International / Farmall tractor models 340, 504, 2500, 2504, 3514, Compatible with International Construction and industrial models TD340, Replaces International OEM number 308382R1, (Item #: 169012) $94.00

Engine Rebuild Kits
No Picture Basic In-Frame Engine Kit - In Frame Engine Kit. For tractor models 330 and 340 up to serial number 100500. (C135 CID 4-cylinder Gas, 3 1/4 inch standard bore). For tractors with stepped head pistons). Kit contains complete sleeve and piston kit with rings, pins and retainers, valve grind gasket set and pan gasket. (Item #: 184902, Ref: BIFH1165) $277.00
Engine Cylinder Sleeve - For International / Farmall tractor models 340, 460, 504, 560, 606, 656, 660, 706, 2504, 2606, 2656, 2706, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 403, 615, Compatible with International Harvester (s) 414, 420, Compatible with International Construction and industrial models TD9, TD9B, TD340, 2500, Compatible with International Engine (s) D166 (early), D188 (early), D236, D282 (.875" pin, wide flange liner), DT282 (1.125" pin, wide flange liner), Replaces International OEM number 278272R1, Bore: 3.6875", Flange O.D.: 4.165", Flange Thickness: .1875", (Item #: 108753) $68.00
No Picture Engine Overhaul Kit, Less Bearings - Overhaul Kit, less bearings for Models: 330 and 340 up to serial number 100500. (C135 CID 4-cylinder Gas). For tractors with stepped head pistons. Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, pin bushings, complete gasket set with crankshaft seals, intake and exhaust valves, valve keys, guides and springs. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 185543, Ref: EOK1165-LCB) $595.41
Engine Overhaul Kit, Less Bearings - Basic Engine Kit, Less Bearings 330 and 340. (C135 CID 4-cyl Gas) For tractors with stepped head pistons). Kit contains sleeves and sleeve seals, pistons and piston rings, pins and retainers, complete gasket set with crankshaft seals. ENGINE BEARINGS ARE NOT INCLUDED. (Item #: 130591, Ref: BEKH1165-LCB) $458.00
No Picture Valve Overhaul Kit - Contains intake and exhaust valve, guides and springs. For tractor models 130, 140, 230, 240, 330, 340, 404, 2404 all with C135 engine and rotating exhaust valves. (Item #: 131640, Ref: VTKIH330) $290.00
Valve Overhaul Kit - Fits 130, 140, 230, 240, 330, 340, 404, 2404 valve length (5-15/64 inch), (4 cylinder gas C123, C135). Kit includes valves, valve springs (for non-roto exhaust valve), valve keys and valve guides. (Item #: 120311, Ref: VOKH135) $184.00

Engine Parts
No Picture Bare Block, Remanufactured, 367727R1 - For International / Farmall tractor model 340, Replaces International Casting number 367727R1, Casting number (s): 367727R1, Our remanufactured bare blocks have been; cleaned, inspected, align bored, and pressure checked, (Item #: 204887) $1100.01
Camshaft Timing Gear - 66 teeth. For tractor models (100, 130, 140, 200, 230, 240, Super C all with 123 CID engine), (330, 340, 404 all with 135 CID engine), (424 with 146 CID engine), (444, 504 with 153 CID), (A, AV, B, BN, C, Super A, Super A1, Super AV, Super AV1 with 113 CID engine). Replaces 375712R1, 6779DB. (Item #: 111038, Ref: 375712R1) $86.00
Clutch Shaft Coupler - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, For applications with mechanical TA, Coupler Does Not Include Part 364411R1 Snap Ring, (Item #: 113408) $59.00
Connecting Rod Bolt - For International / Farmall tractor models 330 (1/57-12/58), 340 (Farmall, Diesel, 1/58-12/63), 340 (Diesel, 1/58-12/63), 340 (Utility, Gas, 1/58-12/63), 460 (Diesel, 1/58-12/63), 460 (Utility, Gas, 1/58-12/63), 460 (Farmall Diesel, 1/58-12/60), 460 (Farmall, Gas, 1/58-12/63), 504 (Farmall 1/60-12/68), 504 (Diesel, 1/60-12/68), 560 (Farmall, Diesel, 1/58-12/63), 560 (Diesel, 1/58-12/63), 560 (Utility, Gas, 1/58-12/63), 606 (1/61-12/67), 660 (Diesel, 1/63-12/67), 660 (Gas, 1/59-12/63), 706 (Farmall, 1/63-12/67), 706 (1/63-12/67), 806, 806 (Farmall), 2504, 2606 (Diesel, 1/61-12/67), 2706 (s/n 1/63-12/67), Compatible with International Combine (s) 303 (Bean Special, 1/62-12/68), Compatible with International Harvester (s) 55 (With Row Crop Unit), 350 (With Row Crop Unit), 414, 420, 550 (With Row Crop Unit), 650, Replaces International OEM number 316366R1, (Item #: 165562) $17.30
Connecting Rod, Used - For International tractor models 330, 340, 460, 504, 560, 656, 660, 706, 2500, 2504, 2606, 2706, 3514, Compatible with International Harvester(s) 414, 420, Compatible with International Engine(s) D166, D188, D236, D282, D301, Replaces International OEM nos 306280R12, Replaces Casting nos 306280, 306280R, 306280R1, Diesel Engines, Length Center to Center: 7.250", Housing Bore: 2.4995" - 2.5000", Pin Diameter: 1.1252" - 1.1258", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498382) $50.01
Constant Mesh Gear, Used - For International tractor models 300, 330, 340, 350, 460, 504, 606, 2504, 2606, Replaces International OEM nos 360567R1, Teeth: 61, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 439823) $140.01
Crankshaft Gear, Used - For International tractor models A, B, C, Super A, Super C, 200, 230, 240, 330, 340, 404, 424, 504, 2404, 2424, 2504, Compatible with International Engine(s) C123, C135, C146, C153, Compatible with International Hay Cutting(s) 201, Replaces International OEM nos 46870DA, Replaces Casting nos 46879DA, 33 Teeth, Inside Diameter: 1.25", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 497149) $89.01
No Picture Crankshaft, Remanufactured, 332021R - For International / Farmall tractor model 340, Compatible with International Engine (s) D166, Replaces Casting number 332021R, 308397R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200237) $490.01
No Picture Crankshaft, Remanufactured, 367747R - For International / Farmall tractor models 330, 340, Compatible with International Engine (s) C135, Replaces Casting number 367747R, Our remanufactured crankshafts are cleaned, magnafluxed, measured and reground if necessary, the journals are then polished., (Item #: 200236) $570.01
Crankshaft Timing Gear - 33 teeth, used in C113, C123, C135, C146, and C153 Engines. For tractor models A, Super A, AV, Super AV, B, BN, C, Super C, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504. (Item #: 121687, Ref: 46870DA) $65.00
No Picture Cylinder Head, Remanufactured, 366206R - For International / Farmall tractor models 330, 340, 404, 424, 444, 504 (Gas), Replaces International Casting number 366206R, Casting No. 366206R, Engine 135, Cylinders: 4, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205495) $550.01
Cylinder Head, Remanufactured, 366299R - For International / Farmall tractor models 330, 340, 404, 424, 444, 504 (Gas), Replaces International Casting number 366299R, Engine 135, Cylinders 4, Casting No. 366299R, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 200197) $810.01
No Picture Cylinder Head, Remanufactured, 375602R - For International / Farmall tractor models 330, 340, 404, 424, 444, 504 (Gas), Replaces International Casting number 375602R, Engine 135, Cylinders: 4, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205497) $800.01
No Picture Cylinder Head, Remanufactured, 375775R - For International / Farmall tractor models 330, 340, 404, 424, 444, 504 (Gas), Replaces International Casting number 375775R, Casting No. 375775R, Engine 135, Cylinders: 4, Not a welded head, Our remanufactured cylinder heads are reconditioned and ready for assembly, with both valve guides and valve seats installed, Cleaned and tested for cracks, (Item #: 205496) $630.01
No Picture Cylinder Head, Used - For International tractor models 240, 340, 404, 424, 444, 504 (Gas), Replaces International Casting number 366206R, Engine(s): 135, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205495, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405495) $291.01
Cylinder Head, Used - For International tractor models 330, 340, 404, 424, 444, 504 (Gas), Replaces International Casting number 375602R, Engine(s): 135, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205497, Additional Handling and Oversize Fees Apply To This Item, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405497) $475.01
No Picture Cylinder Head, Used - For International tractor models 240, 340, 404, 424, 444, 504 (Gas), Replaces International Casting number 375775R, Engine(s): 135, Cylinders: 4, Our used cylinder heads have been visually inspected for cracks, Cylinder head may require further cleaning, inspection, or machining before use, For a Remanufactured version of this part use Item #: 205496, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 405496) $213.01
Drive Shaft Coupling, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2544, 2606, 2656, Replaces International OEM number 364432R91, Splines: 14, For a new version of this item use Item #: 113408, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 435618) $31.01
Governor Assembly - For A, Super A, B, C, Super C, 100, 130, 140, 200, 240, 330, 340, 404. OEM number 375778R11, 374710R1, 356746R91, 356745R91. Does NOT include housing. (Item #: 105375, Ref: R0612) $161.00
Governor Spring - This Governor Spring is 1.748 inches overall length, 0.689 inch body diameter, 0.093 inch wire diameter. It is used on T340, T4, T5, Lo-Boy 154, Lo-Boy 184, Lo-Boy 185, 240, 330, 340, 3514, 504. (Item #: 179294, Ref: 369686R2) $13.90
No Picture Governor Thrust Bearing Assembly - This 3 piece bearing assembly slides onto the governor assembly. For models cub, A, B, C, Super C, 560, Super AV, 184, AV, Bn, Cub Lo-Boy, Super A, 100, 130, 140, 154, 185, 200, 230, 240, 330, 340, 404, 424, 444, 460, 504. Also replaces 55314D. (Item #: 184444, Ref: 43481D) $53.00
Hand Starting Crank, with Spinner - For tractor models (A, B, C, Super A, ALL WITH THE C113 ENGINE), (200, 230, 340, 404, 504 all with tricycle front). Starting Hand Crank with Spinner. Measures 13 1/2 inches to the first bend Longest Straight Section. (Item #: 122095, Ref: 53385DBX) $74.00
Pushrod - Fits A, AV, B, BN, C, Super A, Super A-1, Super AV, Super AV-1, Super C, U2, U2A, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504 (all with C113, C123, C135, C146, C153 gas/LP engines) 10.762 inch length, 0.310 inch tube diameter . Replaces: 360213R91, 357548R1, 47386D, 47385D. (Item #: 182498, Ref: 47385D) $43.00
Push Rod - For [Hydro 70, Hydro 86, 454, 464, 544, 574, 666, 674, 686, 756, 806, 826, 856, 2544, 2756, 2806, 2826, 2856 (Gas and LP Only)], [340, 504, 2504 (Diesel)], [460, 560, 606, 656, 660, 706, 2606, 2656, 2706 (Gas, LP, Diesel (No German Diesels)], [Industrial: 100C, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A, 3600A, 4500A, 4500B, 8000, T6-62, T7 (Gas and LP Only)], [150, H25B, H30A, H30F, H30R, H50A, H50B, H50C, H60B, S7A, S7B, TD340, TD6-62, TD9-91, TD9-92, TD9B (Diesel)], CONSTRUCTALL: 2500 (Diesel), [Industrial: 3514, 3616, 3800, 3850, H30B (Gas, LP, Diesel (No German Diesels)]. Replaces: 164436R91. Size: 12.684 O/A length, .375 tube dia. (Item #: 184399, Ref: 164436R91) $19.30
Push Rod, Used - For International tractor models 330, 340, 350, 460, 504, 560, 606, 660, 706, 806, 2504, 2606, 2706, Compatible with International Combine(s) 303, Compatible with International Harvester(s) 55, 414, 420, 550, 650, Replaces International OEM nos 164436R91, Length: 12 3/4", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430417) $7.51
No Picture Push Rod, Used - For International tractor models A, B, BN, C, Super A, Super AV, Super C, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine(s) C123, C135, C146, C153, Compatible with International Hay Cutting(s) 201, Replaces International OEM number 357548R1, For a new version of this item use Item #: 182498, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 463344) $24.01
Ring Gear Flywheel - For tractor models H, Super H, Super W4, 300, 330, 340, 350. This flywheel has 104 teeth, 13.165 inches outside diameter, 12 inches inside diameter, .550 inches wide. (Item #: 103904, Ref: 45638DB) $46.80
Ring Gear, Flywheel - This Flywheel Ring Gear measures 12.332 Inch Inside Diameter, 13.560 Inch Outside Diameter, Has 134 Teeth and is .485 Inches wide. Fits International Tractors; 300 diesel, 330 diesel, 340 diesel, 350 diesel, 424 gas, 444, 460, (504 diesel serial number 13675 and earlier, gas serial number 29632 and earlier), 544 with Synchromesh Transmission, 606 gas, 656, 666, 686, 2424, 2444, 2544 with Synchromesh Transmission, 2606, 3514 engine serial number 29632 and earlier. Also fits Construction and Industrials; T340, 4000. Replaces 367042R1 (Item #: 121882, Ref: 367042R1) $61.00
Ring Gear, Flywheel - This ring gear has 104 Teeth. For models H, Super H, 300, 330, 340, 350 (Item #: 103904, Ref: R1848) $46.80
Set Of Three Sungears - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, (Item #: 113409) $151.00
TA Clutch Carrier, Used - For International tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces International OEM number 359895R3, For a new version of this item use Item #: 165256, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 441430) $45.01
Torque Amplifier Carrier - For International / Farmall tractor models 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 2504, 2544, 2606, 2656, Replaces Case IH OEM number 359895R3, Teeth: 27, Flywheel Step: .900", (Item #: 165256) $161.01
Valve, Exhaust - Exhaust Valve for Models: 130, 140, 230, 240, 330, 340. (Valve Length 5-15/64 inch). Price shown is for each, sold only in multiples of 4 items. (Item #: 128565, Ref: 366303R4) $12.80
Valve Guide - Valve guide for tractor models 100, 130, 140, 200, 22, 230, 240, (330, 340 serial number 100500 and before), 62, 76, 81, A, A1, AV, AV1, B, BN, C, Super A, Super AV, Super C, (U2, U2A serial number less than 22113). Price shown is for each, sold only in multiples of 8 items. (Item #: 128646, Ref: 356583R21) $4.50
Valve, Intake - Intake Valve is PRICED EACH. For models: 130, 140, 230, 240, 330, 340. (Valve Length 5-15/64 inch. (Item #: 128519, Ref: 366302R2) $8.40
Valve Key, Intake and Exhaust, 1/2 - Sold per 1/2 valve, order 2 per valve. For tractor models 100, 130, 140, 200, 22, 230, 240, 300, (330, 340 serial number less than 100500), 350, 62, 76, 81, A, A1, AV, AV1, B, BN, C, H, HV, O4, OS4, Super A, Super AV, Super C, Super H, Super HV, Super W4, (U2, U2A serial number less than 22113), W4. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929. Sixteen required per engine. (Item #: 107088, Ref: 7HA6518) $0.60
Valve Rotator - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 544, 560, 574, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2500A, 2500B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 101, 151, 181, 205, 303, 315, 403, 615, 715, Compatible with International Harvester (s) 414, 420, 616, 622, Compatible with International Construction and industrial models T6, TD6, TD340, 100, 2500B, 2505B, 3500A, 4500B, 8000, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 375604R91, Replaces International Casting number 278368R, Engine: D282 early, Use with Head Casting No. 278368R, (Item #: 109732) $52.00
No Picture Valve Service Kit - Cylinder HEAD Service KIT For 130, 140, 230, 240, 330, 340. Contains: springs, guides, locks, (no valves). (Item #: VSKH135) $114.15
Valve Spring - Spring intake and exhaust valve~ 8 used per engine without rorocaps. For C135 CID gas 4 cylinder engine in tractors 330 and 340. Stepped head piston. For 130, 140, 230, 240, 330, 340. Price is for one valve spring. (Item #: 128738, Ref: 406723R1) $9.70
Valve Spring - For International / Farmall tractor models 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Compatible with International Engine (s) C135, C153, Replaces International OEM number 368450R1, Exhaust, (Item #: 128648) $9.60
No Picture Valve Spring - For International / Farmall tractor models Hydro 70, Hydro 86, 340, 454, 460, 464, 560, 606, 656, 660, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2400B, 2544, 2606, 2656, 2706, 2756, 2806, 2826, 2856, 3514, 3616, Compatible with International Combine (s) 50, 101, 151, 181, 205, 303, 315, 403, 453, 715, Compatible with International Harvester (s) 616, 622, Compatible with International Construction and industrial models TD340, 100, 2400A, 2400B, 2405B, 2410B, 2500A, 2505B, 2510B, 3400A, 3500A, 3800, 3850, 4500B, 8000, Compatible with International Engine (s) C157, C175, C200, C221, C236, C263, C291, C301, D166, D236, D282, DT282, Compatible with International Hay Cutting (s) 375, Replaces International OEM number 367192R1, (Item #: 185589) $4.20