Re: alternator puytting out too much on 12 v conversion???

Posted by GUIDO on May 06, 2011 at 05:49:05 from (71.188.5.200):

In Reply to: alternator puytting out too much on 12 v conversion??? posted by ctallen2011 on May 05, 2011 at 18:49:49:

Hello ctallen2011,
One wire alternator has an internal voltage regulator. Make sure you have a good ground from the alternator to the battery.
If that part is O.K. take the alternator back and get another one.
Charging voltage should be 13.8 to 14.2 volts.
You may measure a bit more voltage, but when it gets above 14.5V or more, that is too much! Battery voltage is 12.6 volts at 70 degrees when fully charged.
Guido.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]