Re: Machine Shop Rates

Posted by gun guru on April 20, 2011 at 14:20:53 from (75.128.139.102):

In Reply to: Machine Shop Rates posted by Inno on April 20, 2011 at 12:55:18:

Please list the ID and OD and length of bushings and the material to be used. Also give tolerance of the OD and ID

I will give you and exact time in hours and minutes it would take for me to make them and the matl. cost.

I have to make up T and M quotes all the time for jobs at where I work.

Also: a small shop that is not busy will likely charge $40 per hour, $50 per hour if they are busy and if they just plain dont want to do it then the sky's the limit on the price.

Replies:

Add a Reply Name: E-Mail: Subject: Comments: Optional Link URL: Link Title: Optional Image URL: Optional Video Title: Optional Video URL: Advanced Posting Options Email Notification: If you check this box, email will be sent to you whenever someone replies to this message. Your email address must be entered above to receive notification. This notification will be cancelled automatically after 2 weeks.   Advanced Posting Tools   Upload Photo  Select Gallery Photo  Attach Serial # List  Return to Post

TRACTOR PARTS	TRACTOR MANUALS

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]