Posted by Whizkidkyus on January 17, 2011 at 21:46:23 from (64.130.158.6):
In Reply to: alternator posted by Gary Polivka on January 17, 2011 at 18:45:22:
Any V belt pulley will work as long as it is designed to fit on the shaft of your alternator . The main concern is that the alternator is turning in the direction that it's supposed to turn in order to work . In other words , if the alternator has to turn clockwise in order to work and the engine is turning counterclockwise then you will have a problem . I'm no expert on the way alternators have to turn nor am I on how engines turn, so I don't know if this will be a problem in your case or not . Another problem is that you need to get the same diameter pulley as what was originally on the alternator as that was what it was designed for in order to produce the correct voltage .
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Good As New - by Bill Goodwin. In the summer of 1995, my father, Russ Goodwin, and I acquired the 1945 Farmall B that my grandfather used as an overseer on a farm in Waynesboro, Georgia. After my grandfather�s death in 1955, J.P. Rollins, son of the landowner, used the tractor. In the winter 1985, while in his possession the engine block cracked and was unrepairable. He had told my father
... [Read Article]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
