I have one I bought from mother Deere and it seems to be OK. The batteries don't last the way I think they should but that might be my fault.
Some of the guys have put away the battery gun and have gone back to hand pumping because they're afriad of over-greasing. I guess that's up to the general knoweldge and abilities of the individual.
I'm not trying to discourage you from buying a battery gun. It's just sooooooo easy to keep squeezing the trigger too long.
A couple of years ago while I was in Kansas on the wheat harvest I got out to the field at the crack of dawn to replace a bearing before the rest of the crew got there. Another harvester who was parked across the fence was out there early too so he could do his 100 hour service. His battery gun was in their service truck at the camp ground so he came over and asked me if he could borrow mine.
I let him take the gun and he went to servicing. He was close enough so I could hear the gun whining and on every zerk that gun must have pumped twenty times or more! He was getting it done alright! I wonder how many tubes he went through?
I read an article on proper bearing care and in this article one bearing manufacturer was quoted as saying they LIKE powered grease guns. They sell more bearings because of them. Jim
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Fasteners: The Nuts and Bolts of Nuts and Bolts - by Curtis Von Fange. The nuts and bolts of nuts and bolts is an interesting and essential piece of knowledge that applies to our older tractors. An improperly torqued capscrew on an engine head or a shear bolt that is too hard on the driving shaft of a bushog can create havoc and make an expensive and uncalled for repair. Let�s examine the purpose and design of these fasteners in order to ensure their proper use. Fasteners are probably one of the aspects of mechanics that is given the least amount of thought.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
