Posted by Ferd on January 07, 2011 at 10:08:56 from (71.111.67.130):
In Reply to: Syntheic oil posted by ShaggyM on January 07, 2011 at 06:37:15:
I had a 94 Ford pickup that I changed oil on - Mobil 1 - one day when I wasn"t feeling good and partly due to the filter location, I didn"t notice the gasket had come off of the filter (I know I should have checked for leaks before moving the truck). After about 4 miles I started hearing a lot of engine noise - looked & no oil pressure. Had another mile home and figured the engine was toast anyway so drove home. After new oil and filter, it knocked a bit when I started it and then smoothed out. Had maybe 70,000 miles when it happened and I drove it another 50,000 miles with no problems or oil usage. Can"t say for sure it was the synthetic oil but always thought it might have been what saved it.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Tractor Profile: Allis-Chalmers Model G - by Staff. The first Allis-Chalmers Model G was produced in 1948 in Gasden, Alabama, and was designed for vegetable gardeners, small farms and landscape businesses. It is a small compact tractor that came with a complete line of implements especially tailored for its unique design. It featured a rear-mounted Continental N62 four-cylinder engine with a 2-3/8 x 3-1/2 inch bore and stroke. The rear-mounted engine provided traction for the rear wheels while at the same time gave the tractor operator a gre
... [Read Article]
Latest Ad:
Oliver 550 Diesel runs like a watch three point hitch pto engine gone threw about two hundred hours ago nice clean tractor
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.