Nice pictures. I enjoy seeing how others are doing things. I still wonder if this "renewable energy" kick is just another big boon doggle. All of the info I can get to read shows that wind and solar cost per kilowatt is many times more expensive. It can only make it with heavy tax breaks. If a business can"t make it by customer demand and making a profit, then it is foolishness to subsidizes it.
There are two good size wind generators around Cascade, Ia. that where installed several years ago. They both are not running now. Both owners said that the up keep was more cost that what they produced. One is going to knock his down come spring as he is having to pay taxes on it as if it where running.
I have heard that solar panel cost is way down right now. They make more since to me than the wind mills. Even with the high winds here in Iowa there are too many days of dead calm or too high of wind that the generator are not working but we do have quite a few sunny days.
I will just keep buying electric for now as it is cheaper than the other options. They will not let me own a private nuclear plant so I can"t have my own energy supply. LOL
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Timing Your Magneto Ignition Tractor - by Chris Pratt. If you have done major engine work or restored your tractor, chances are you removed the magneto and spark plug wires and eventually reached the point where you had to put it all back together and make it run. On our first cosmetic restoration, not having a manual, we carefully marked the wires, taped the magneto in the position it came off, and were careful not to turn the engine over while we had these components off. We thought we could get by with this since the engine ran perfectly and would not need any internal work. After the cleanup and painting was done, we began reassembly and finally came to t
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
