Posted by buickanddeere on October 23, 2010 at 14:48:55 from (209.240.122.166):
In Reply to: 12v or 24v posted by Mark - IN. on October 23, 2010 at 12:07:54:
Quoting Removed, click Modern View to see
12V. You friend isn't your friend. He's trying to smoke the electrics on your tractor. Turn him around and kick his dumb *ss.
It's possible the batteries are not getting charged due to short stop-start cycles.
The charging system maybe low on output due to alternator problems but.................More likely due to a slipping glazed belt/alternator pulley. Don't waste your time and money cranking the belt down super tight to prevent slippage. You will be in the market for a water pump and alternator.
If there isn't a destroker on the hydraulic pump. Install and use it. It's a whole $15.00 and worth hundreds of dollars.
Finally. Take the rinky dink chassis connection off the sheet metal. And run a heavy cable down to the starter mounting post. Don't bother stopping at the Walmart battery cable bin for a 4 gauge cable either.
Last of all, the batteries have to be in good condition. Matched in size and age too.
My uncle had starting problems with the 1640 a decade before I purchased it. One battery connection was a dud and it was starting on one battery.
Unless you go through and actually measure voltages. You can clean, replace and guess all day and miss the poor connection.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - Seeing an Old Friend - by Joe Evans. Dad had a concrete contracting business starting in 1960. One of his first pieces of equipment was a Ferguson TO-35 with a Davis loader. Dad replaced the TO-35 with a MF 202 Workbull, essentially an industrialized Ferguson 35 I am told. Dad bought the 202 new in 1962, and I recall quite clearly going to the dealer with him to sign for it.
... [Read Article]
Latest Ad:
one 8n and one 9n tractor. totaly restored,pretty much everything is new. one 6ft blade good shape.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
