Stihl makes their own bar and chains. There are other brands that are every bit as good, including some versions of Oregon. You just have to be careful what you buy. I've never known Stihl to make a bad or soft chain. They do make some crappy "safety" consumer chains. Other companies tend to have pro and consumer versions with good and bad. I've seen countless bars thrown out when there wasn't a thing wrong with them. Poorly sharpened, crooked-cuting chains often wind up with new bars, in attempts to fix. For that reason, I still have piles of good used bars from the 1970s when I first worked for s Stihl dealer. That includes Stihl and Oregon bars.
When it comes to chain, much is a toss up when choosing. A chain with a softer metal will be easier to sharpen by hand with a file. A super hard abraision resistant chain, especially full chisel, and be very difficult to sharpen properly without a machine. That's why many chains come "in-between." All depends on your type of cutting and method of sharpening.
I bought two new 56 cc Efco saws this year and the chain on them is one of the best semi-chisel versions I've ever used. But, I have NO idea what brand it is. No name on it, but I suspect it's made in Italy. I'll also add those Efco saws are fantastic, for their power-to-weight, along with real ball bearings on the crankshaft mains, and real metal crankcase and bar cover - unlike many consumer-level Stihls that are now plastic.
We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]
Today's Featured Article - My Ford Golden Jubilee - by Troy Estes. This article is about my '53 Ford Jubilee and a story that starts with taking the tractor to my brother's Starter/Alternator Rebuilding shop for a wiring fix. The generator was shot as well as all the wiring. I dropped off the tractor expecting a transformation from a 6 volt to a 12 volt system utilizing the original generator housing, and a total rewiring of the whole tractor. The front end center pin bushing was worn also so I ask that they replace it if they had time. Well, that�s wha
... [Read Article]
Latest Ad:
1965 International Harvester McCormick Farmall cub tractor 2,500. Two owner tractor. My grandfather bought new in 1966, then we inherited it. Have all the paperwork original manual and all maintenance records. It starts and moves. Comes with underbelly mower, plough, and some other attachments.
[More Ads]
All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy
TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.
